Начало работы

Для программного взаимодействия с Авторизованными покупателями можно использовать три API:

Вот несколько примеров задач, которые можно выполнить с помощью API Авторизованных покупателей:

  • Получите доступ к информации об учетной записи для ставок в реальном времени.
  • Отправляйте креативы, находящиеся на рассмотрении, и управляйте ими.
  • Получайте показатели устранения неполадок при назначении ставок в режиме реального времени.
  • Управление списками пользователей Авторизованных покупателей.
  • Управление конфигурациями предварительного таргетинга.
  • Настройте клиентский доступ к Marketplace.
  • Находите предложения о сделках на торговой площадке и управляйте ими.

Если вы не знакомы с Авторизованными покупателями, дополнительную информацию можно найти в Справочном центре и пользовательском интерфейсе Авторизованных покупателей .

Настройка аутентификации

API Google используют протокол OAuth 2.0 для аутентификации и авторизации. Ниже описано, как настроить аутентификацию для API назначения ставок в реальном времени с помощью OAuth 2.0.

В этом примере используется учетная запись службы . Дополнительные сведения об управлении доступом см. в документации по управлению доступом к Google Cloud Identity .

  1. Перейдите на страницу API с поддержкой консоли Google API .

  2. В раскрывающемся списке проектов выберите проект или создайте новый.

  3. Убедитесь, что в списке включенных API указан API для назначения ставок в реальном времени. Если его нет в списке, перейдите на вкладку Google API , найдите и выберите API для назначения ставок в реальном времени и нажмите «Включить API» .

  4. Далее на боковой панели слева выберите «Учетные данные» .

  5. Выберите раскрывающийся список «Создать учетные данные» , затем выберите «Ключ служебной учетной записи» .

  6. В раскрывающемся списке «Учетная запись службы» выберите «Новая учетная запись службы» .

  7. Введите имя для учетной записи службы. Идентификатор учетной записи службы автоматически генерируется из имени и названия проекта.

  8. Запишите идентификатор сервисной учетной записи: он понадобится вам, чтобы предоставить доступ к новой сервисной учетной записи в пользовательском интерфейсе Авторизованных покупателей на шаге 11.

  9. Выберите рекомендуемый файл JSON в качестве типа ключа .

  10. Нажмите Создать . Файл JSON с парой открытого и закрытого ключей учетной записи сохраняется в папке «Загрузки». Сохраните сгенерированный файл JSON в надежном месте.

  11. Чтобы она работала, необходимо предоставить сервисному аккаунту доступ в пользовательском интерфейсе Авторизованных покупателей . Выберите «Настройки» > «Настройки учетной записи» , затем выберите «Управление пользователями» > «Пользователи учетной записи» и нажмите «+Учетная запись службы ». Введите идентификатор учетной записи службы, который вы указали выше на шаге 8. При этом будет создан новый пользователь с ролью учетной записи службы.

Убедитесь, что несколько человек имеют доступ администратора к вашему облачному проекту на случай, если вам понадобится изменить разрешения.

Запросить доступ к API

При прохождении процесса авторизации OAuth 2.0 ваше приложение может указать области запроса доступа к определенным функциям от имени других учетных записей Google. Используйте следующие области, чтобы получить доступ для чтения и записи к любому из API Авторизованных покупателей от имени учетной записи Авторизованных покупателей:

  • API торговой площадки : https://www.googleapis.com/auth/authorized-buyers-marketplace.
  • API для назначения ставок в реальном времени : https://www.googleapis.com/auth/realtime-bidding.
  • API для покупателей Ad Exchange II : https://www.googleapis.com/auth/adexchange.buyer.

Сделать вызов API

Вот несколько примеров, которые вы можете использовать для начала работы на поддерживаемых языках:

API торговой площадки

Джава

/*
 * Copyright 2021 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.google.api.services.samples.authorizedbuyers.marketplace.v1;

import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpRequestInitializer;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.JsonFactory;
import com.google.api.client.json.gson.GsonFactory;
import com.google.api.services.authorizedbuyersmarketplace.v1.AuthorizedBuyersMarketplace;
import com.google.api.services.authorizedbuyersmarketplace.v1.AuthorizedBuyersMarketplaceScopes;
import com.google.api.services.authorizedbuyersmarketplace.v1.model.Client;
import com.google.auth.http.HttpCredentialsAdapter;
import com.google.auth.oauth2.GoogleCredentials;
import com.google.auth.oauth2.ServiceAccountCredentials;
import java.io.FileInputStream;
import java.io.IOException;
import java.util.HashSet;
import java.util.List;
import java.util.Set;

/**
 * A sample application that authenticates and runs a request against the Authorized Buyers
 * Marketplace API.
 */
public class FirstApiRequest {

  /**
   * Be sure to specify the name of your application. If the application name is {@code null} or
   * blank, the application will log a warning. Suggested format is "MyCompany-ProductName/1.0".
   */
  private static final String APPLICATION_NAME = "APPLICATION_NAME_HERE";

  // Full path to JSON Key file - include file name.
  private static final java.io.File JSON_FILE = new java.io.File("INSERT_PATH_TO_JSON_FILE");

  // Name of the buyer resource for which the API call is being made.
  private static final String BUYER_NAME = "INSERT_BUYER_RESOURCE_NAME";

  // Global instance of the HTTP transport.
  private static HttpTransport httpTransport;

  // Global instance of the JSON factory.
  private static final JsonFactory jsonFactory = GsonFactory.getDefaultInstance();

  public static void main(String[] args) throws Exception {
    // Create credentials using the JSON key file.
    GoogleCredentials credentials = null;

    try (FileInputStream serviceAccountStream = new FileInputStream((JSON_FILE))) {
      Set<String> scopes = new HashSet<>(AuthorizedBuyersMarketplaceScopes.all());
      credentials = ServiceAccountCredentials.fromStream(serviceAccountStream).createScoped(scopes);
    } catch (IOException ex) {
      System.out.println("Can't complete authorization step. Did you specify a JSON key file?");
      System.out.println(ex);
      System.exit(1);
    }

    HttpRequestInitializer requestInitializer = new HttpCredentialsAdapter(credentials);
    httpTransport = GoogleNetHttpTransport.newTrustedTransport();

    // Use the credentials to create a client for the API service.
    AuthorizedBuyersMarketplace marketplaceClient =
        new AuthorizedBuyersMarketplace.Builder(httpTransport, jsonFactory, requestInitializer)
            .setApplicationName(APPLICATION_NAME)
            .build();

    // Call the buyers.clients.list method to get a list of clients for the given buyer.
    List<Client> clients =
        marketplaceClient.buyers().clients().list(BUYER_NAME).execute().getClients();

    if (clients != null && clients.size() > 0) {
      System.out.printf("Listing of clients associated with buyer \"%s\"%n", BUYER_NAME);
      for (Client client : clients) {
        System.out.printf("* Client name: %s\n", client.getName());
      }
    } else {
      System.out.printf(
          "No clients were found that were associated with buyer \"%s\"%n.", BUYER_NAME);
    }
  }
}

Питон

#!/usr/bin/python
#
# Copyright 2022 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Sample application that authenticates and makes an API request."""

import pprint
from googleapiclient.discovery import build
from google.oauth2 import service_account

# A Service Account key file can be generated via the Google Developers
# Console.
KEY_FILE = 'PATH_TO_JSON_KEY_FILE'  # Path to Service Account JSON key file.

# Authorized Buyers Marketplace API authorization scope.
SCOPE = 'https://www.googleapis.com/auth/authorized-buyers-marketplace'
VERSION = 'v1'  # Version of Authorized Buyers Marketplace API to use.

# Name of the buyer resource for which the API call is being made.
BUYER_NAME = 'BUYER_RESOURCE_NAME'


def main():
  # Create credentials using the Service Account JSON key file.
  credentials = service_account.Credentials.from_service_account_file(
      KEY_FILE, scopes=[SCOPE])

  # Build a client for the authorizedbuyersmarketplace API service.
  marketplace = build('authorizedbuyersmarketplace', VERSION, credentials=credentials)

  # Call the buyers.clients.list method to get a list of clients for the
  # given buyer.
  request = marketplace.buyers().clients().list(parent=BUYER_NAME)

  pprint.pprint(request.execute())


if __name__ == '__main__':
  main()

.СЕТЬ

/* Copyright 2021 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

using Google.Apis.AuthorizedBuyersMarketplace.v1;
using Google.Apis.AuthorizedBuyersMarketplace.v1.Data;
using Google.Apis.Auth.OAuth2;
using Google.Apis.Json;
using Google.Apis.Services;

using System;
using System.Collections.Generic;

namespace Google.Apis.AuthorizedBuyersMarketplace.Examples.v1
{
    /// <summary>
    /// Self contained sample to return a list of clients for a given buyer account.
    /// Primarily used by the Getting Started guide:
    /// https://developers.google.com/authorized-buyers/apis/getting_started
    ///
    /// Note: To run this sample, you will need to configure it as the StartupObject in
    /// Google.Apis.AuthorizedBuyersMarketplace.Examples.csproj.
    /// </summary>
    internal class FirstApiRequest
    {
        private static void Main(string[] args)
        {
            // See the README.md for details of these fields.
            // Retrieved from https://console.developers.google.com
            var ServiceKeyFilePath = "PATH TO JSON KEY FILE HERE";

            // Name of the buyer resource for which the API call is being made.
            var buyerName = "INSERT_BUYER_RESOURCE_NAME_HERE";

            // Retrieve credential parameters from the key JSON file.
            var credentialParameters = NewtonsoftJsonSerializer.Instance
                .Deserialize<JsonCredentialParameters>(
                    System.IO.File.ReadAllText(ServiceKeyFilePath));

            // Create the credentials.
            var credentialInitializer = new ServiceAccountCredential.Initializer(
                    credentialParameters.ClientEmail)
                {
                    Scopes = new[]
                    {
                        AuthorizedBuyersMarketplaceService.Scope.AuthorizedBuyersMarketplace
                    }
                }.FromPrivateKey(credentialParameters.PrivateKey);

            var oAuth2Credentials = new ServiceAccountCredential(credentialInitializer);

            // Use the credentials to create a client for the API service.
            var serviceInitializer = new BaseClientService.Initializer
                {
                    HttpClientInitializer = oAuth2Credentials,
                    ApplicationName = "FirstAPICall"
                };

            var mkService = new AuthorizedBuyersMarketplaceService(serviceInitializer);

            // Call the buyers.clients.list method to list clients for the given buyer.
            BuyersResource.ClientsResource.ListRequest request =
                mkService.Buyers.Clients.List(buyerName);

            IList<Client> clients = request.Execute().Clients;

            foreach (Client client in clients)
            {
                Console.WriteLine("* Client name: {0}", client.Name);
            }

            Console.ReadLine();
        }
    }
}

PHP

<?php

/**
 * Copyright 2022 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * Sample application that authenticates and makes an API request.
 */

namespace Google\Ads\AuthorizedBuyers\Marketplace\Examples\V1;

/**
 * Provide path to client library. See README.md for details.
 */
require_once __DIR__ . '/../../vendor/autoload.php';

use Google_Client;
use Google_Service_AuthorizedBuyersMarketplace;


session_start();

/**
 * You can retrieve this file from the Google Developers Console.
 *
 * See README.md for details.
 */
$keyFileLocation = "INSERT_PATH_TO_JSON_KEYFILE";

/**
 * Name of the buyer resource for which the API call is being made.
 */
$buyerName = "INSERT_BUYER_RESOURCE_NAME";

if ($keyFileLocation === 'INSERT_PATH_TO_JSON_KEYFILE') {
    print "WARNING: Authorization details not provided!\n";
    exit(1);
}

$client = new Google_Client();
$client->setApplicationName('Authorized Buyers Marketplace API PHP Samples');

$service = new Google_Service_AuthorizedBuyersMarketplace($client);

$client->setAuthConfig($keyFileLocation);
$client->addScope('https://www.googleapis.com/auth/authorized-buyers-marketplace');

if ($client->isAccessTokenExpired()) {
    $client->refreshTokenWithAssertion();
}

if ($client->getAccessToken()) {
    // Call the buyers.clients.list method to get a list of clients for the given buyer.
    $result = $service->buyers_clients->listBuyersClients($buyerName);

    print "Clients associated with buyer account\n";
    if (empty($result['clients'])) {
        print "No clients found\n";
        return;
    } else {
        foreach ($result['clients'] as $client) {
            print_r($client);
        }
    }
}

Рубин

#!/usr/bin/env ruby
# Encoding: utf-8
#
# Copyright:: Copyright 2022 Google LLC
#
# License:: Licensed under the Apache License, Version 2.0 (the "License");
#           you may not use this file except in compliance with the License.
#           You may obtain a copy of the License at
#
#           http://www.apache.org/licenses/LICENSE-2.0
#
#           Unless required by applicable law or agreed to in writing, software
#           distributed under the License is distributed on an "AS IS" BASIS,
#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
#           implied.
#           See the License for the specific language governing permissions and
#           limitations under the License.
#
# Sample application that authenticates and makes an API request.

require 'google/apis/authorizedbuyersmarketplace_v1'
require 'googleauth/service_account'

# You can download the JSON keyfile used for authentication from the Google
# Developers Console.
KEY_FILE = 'path_to_key'  # Path to JSON file containing your private key.

# Name of the buyer resource for which the API call is being made.
BUYER_NAME = 'insert_buyer_resource_name'


def first_api_request()
  # Create credentials using the JSON key file.
  auth_options = {
    :json_key_io => File.open(KEY_FILE, "r"),
    :scope => 'https://www.googleapis.com/auth/authorized-buyers-marketplace'
  }

  oauth_credentials = Google::Auth::ServiceAccountCredentials.make_creds(
    options=auth_options
  )

  # Create the service and set credentials
  marketplace = (
    Google::Apis::AuthorizedbuyersmarketplaceV1::AuthorizedBuyersMarketplaceService.new
  )
  marketplace.authorization = oauth_credentials
  marketplace.authorization.fetch_access_token!

  begin
    # Call the buyers.clients.list method to get list of clients for given buyer.
    clients_list = marketplace.list_buyer_clients(BUYER_NAME)

    if clients_list.clients.any?
      puts "Found the following clients for buyer '%s':" % BUYER_NAME
      clients_list.clients.each do |client|
        puts "* Client name: #{client.name}"
      end
    else
      puts "No clients were found that were associated with buyer '%s'" % BUYER_NAME
    end
  rescue Google::Apis::ServerError => e
    raise "The following server error occured:\n%s" % e.message
  rescue Google::Apis::ClientError => e
    raise "Invalid client request:\n%s" % e.message
  rescue Google::Apis::AuthorizationError => e
    raise "Authorization error occured:\n%s" % e.message
  end
end

if __FILE__ == $0
  begin
    first_api_request()
  end
end

API для ставок в реальном времени

Джава

Вот базовый пример, показывающий, как использовать API назначения ставок в реальном времени с Java.

  1. Создать проект Maven

    Откройте pom.xml и добавьте эти зависимости:

    <dependencies>
      <dependency>
        <groupId>com.google.api-client</groupId>
        <artifactId>google-api-client</artifactId>
        <version>1.32.2</version>
      </dependency>
      <dependency>
        <groupId>com.google.apis</groupId>
        <artifactId>google-api-services-pubsub</artifactId>
        <version>v1-rev452-1.25.0</version>
      </dependency>
      <dependency>
        <groupId>com.google.apis</groupId>
        <artifactId>google-api-services-realtimebidding</artifactId>
        <version>v1-rev20220503-1.32.1</version>
      </dependency>
      <dependency>
        <groupId>com.google.auth</groupId>
        <artifactId>google-auth-library-oauth2-http</artifactId>
        <version>1.3.0</version>
      </dependency>
      <dependency>
        <groupId>com.google.code.gson</groupId>
        <artifactId>gson</artifactId>
        <version>2.8.9</version>
      </dependency>
      <dependency>
        <groupId>com.google.http-client</groupId>
        <artifactId>google-http-client-jackson2</artifactId>
        <version>1.40.1</version>
      </dependency>
      <dependency>
        <groupId>joda-time</groupId>
        <artifactId>joda-time</artifactId>
        <version>2.10.13</version>
      </dependency>
      <dependency>
        <groupId>net.sourceforge.argparse4j</groupId>
        <artifactId>argparse4j</artifactId>
        <version>0.9.0</version>
      </dependency>
    </dependencies>
      

  2. Настройте свои учетные данные

    Все вызовы API требуют аутентификации; создайте Credential , используя файл ключей JSON учетной записи службы, описанный выше.

    GoogleCredentials credentials = null;
    
    try (FileInputStream serviceAccountStream = new FileInputStream((JSON_FILE))) {
      Set<String> scopes = new HashSet<>(RealTimeBiddingScopes.all());
      credentials = ServiceAccountCredentials.fromStream(serviceAccountStream).createScoped(scopes);
    } catch (IOException ex) {
      System.out.println("Can't complete authorization step. Did you specify a JSON key file?");
      System.out.println(ex);
      System.exit(1);
    }
  3. Создание клиента для API назначения ставок в реальном времени

    Затем вы можете создать клиент API для назначения ставок в реальном времени, используя шаблон Builder:

    
    HttpRequestInitializer requestInitializer = new HttpCredentialsAdapter(credentials);
    httpTransport = GoogleNetHttpTransport.newTrustedTransport();
    
    // Use the credentials to create a client for the API service.
    RealTimeBidding realtimeBidding =
        new RealTimeBidding.Builder(httpTransport, jsonFactory, requestInitializer)
            .setApplicationName(APPLICATION_NAME)
            .build();

  4. Выполнить операцию

    После того как вы создали экземпляр клиента для подключения к API, вы можете выполнить операцию. Следующий код возвращает все креативы данного Покупателя.

        List<Creative> creatives =
            realtimeBidding
                .buyers()
                .creatives()
                .list(BUYER_NAME)
                .setView("FULL")
                .execute()
                .getCreatives();
    
        if (creatives != null && creatives.size() > 0) {
          System.out.printf("Listing of creatives associated with buyer '%s'%n", BUYER_NAME);
          for (Creative creative : creatives) {
            System.out.printf("* Creative name: %s\n", creative.getName());
          }
        } else {
          System.out.printf(
              "No creatives were found that were associated with buyer '%s'%n.", BUYER_NAME);
        }

Более подробную информацию об использовании API назначения ставок в реальном времени с Java см. в файле README в примерах API назначения ставок в реальном времени .

Питон

Вот базовый пример, показывающий, как использовать API назначения ставок в реальном времени с Python.

  1. Загрузите и установите клиент Google API Python.

    Пример использования pip:

    $ pip install --upgrade google-api-python-client

  2. Настройте свои учетные данные

    Все вызовы API требуют аутентификации; создайте экземпляр экземпляра service_account.Credentials , используя JSON-файл ключа учетной записи службы, описанный выше.

      credentials = service_account.Credentials.from_service_account_file(
          KEY_FILE, scopes=[SCOPE])
  3. Создайте клиент для API назначения ставок в реальном времени.

    Затем вы можете создать клиент API для назначения ставок в реальном времени, используя авторизованный экземпляр service_account.Credentials :

    realtimebidding = build('realtimebidding', VERSION, credentials=credentials)

  4. Выполнить операцию

    После того как вы создали экземпляр клиента для подключения к API, вы можете выполнить операцию. Следующий код возвращает все креативы данного Покупателя.

    request = realtimebidding.buyers().creatives().list(parent=BUYER_NAME)
    
    pprint.pprint(request.execute())

Более подробную информацию об использовании Ad Exchange Buyer API с Python см. в файле README в примерах API для назначения ставок в реальном времени .

PHP

Вот базовый пример, показывающий, как использовать API назначения ставок в реальном времени с PHP.

  1. Настройка зависимостей

    Если вы еще не установили его, загрузите и установите Composer , затем создайте композитор.json со следующим содержимым:

    {
      "description": "Authorized Buyers Real-Time Bidding API PHP Samples",
      "require": {
        "php": ">=7.2",
        "google/apiclient": "^2.0"
      },
      "require-dev": {
        "squizlabs/php_codesniffer": "3.*"
      },
      "type": "project",
      "homepage": "https://github.com/googleads/authorized-buyers-rtb-api-samples/tree/master/php",
      "license": "Apache-2.0",
      "authors": [
        {
          "name": "Google",
          "homepage": "https://github.com/googleads/authorized-buyers-rtb-api-samples/graphs/contributors"
        }
      ]
    }
    

    Наконец, запустите следующую команду, чтобы установить библиотеки зависимостей:

    composer install
  2. Настройка клиента

    Создайте Google_Client и используйте его для создания экземпляра Google_Service_RealTimeBidding .

    
    $client = new Google_Client();
    $client->setApplicationName('Authorized Buyers Real-time Bidding API PHP Samples');
    
    $service = new Google_Service_RealTimeBidding($client);
  3. Настройте свои учетные данные

    Для всех вызовов API требуется действительный токен доступа. Настройте свой клиент для прохождения потока OAuth 2.0.

    
    $client->setAuthConfig($keyFileLocation);
    $client->addScope('https://www.googleapis.com/auth/realtime-bidding');
    
    if ($client->isAccessTokenExpired()) {
        $client->refreshTokenWithAssertion();
    }
  4. Выполнить операцию

    После того как вы создали экземпляр клиента для подключения к API и настроили OAuth 2.0, вы можете использовать его для вызова API. Следующий код возвращает все объявления данного Покупателя:

    $result = $service->buyers_creatives->listBuyersCreatives($buyerName, $queryParams);
    
    print "Creatives associated with buyer account\n";
    if (empty($result['creatives'])) {
        print "No creatives found\n";
        return;
    } else {
        foreach ($result['creatives'] as $creative) {
            print_r($creative);
        }
    }

Более подробную информацию об использовании Ad Exchange Buyer API с PHP см. в файле README в примерах API для назначения ставок в реальном времени .

.СЕТЬ

Ниже приведен базовый пример, показывающий, как использовать API назначения ставок в реальном времени с C#.

  1. Создать новый проект

    Откройте Visual Studio Code и создайте новый проект.

  2. Добавьте необходимые ссылки на библиотеки в свой проект

    В файл *.csproj вашего проекта добавьте запись PackageReference для Google.Apis , Google.Apis.Auth , Google.Apis.Core , Google.Apis.Oauth2.v2 и Google.Apis.RealTimeBidding.v1 . В качестве примера это может выглядеть следующим образом:

    <ItemGroup>
      <PackageReference Include="Google.Apis" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Auth" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Core" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Oauth2.v2" Version="1.57.0.1869" />
      <PackageReference Include="Google.Apis.Pubsub.v1" Version="1.57.0.2667" />
      <PackageReference Condition="!Exists('./Google.Apis.RealTimeBidding.v1.csproj')" Include="Google.Apis.RealTimeBidding.v1" Version="1.57.0.2680" />
      <PackageReference Include="log4net" Version="2.0.13" />
      <PackageReference Include="Microsoft.Extensions.Configuration" Version="3.1.4" />
      <PackageReference Include="Microsoft.NETFramework.ReferenceAssemblies" Version="1.0.0">
        <PrivateAssets>all</PrivateAssets>
        <IncludeAssets>runtime; build; native; contentfiles; analyzers</IncludeAssets>
      </PackageReference>
      <PackageReference Include="Mono.Options" Version="6.12.0.148" />
      <PackageReference Include="Newtonsoft.Json" Version="13.0.1" />
    </ItemGroup>

    Дополнительную информацию об этих зависимостях можно найти по адресу: https://www.nuget.org/packages/ .

  3. Настройте свои учетные данные

    Все вызовы API требуют аутентификации; создайте Credential , используя адрес электронной почты сервисной учетной записи и файл JSON, описанный выше.

    var credentialParameters = NewtonsoftJsonSerializer.Instance
        .Deserialize<JsonCredentialParameters>(
            System.IO.File.ReadAllText(ServiceKeyFilePath));
    
    // Create the credentials.
    var credentialInitializer = new ServiceAccountCredential.Initializer(
            credentialParameters.ClientEmail)
        {
            Scopes = new[] { RealTimeBiddingService.Scope.RealtimeBidding }
        }.FromPrivateKey(credentialParameters.PrivateKey);
    
    var oAuth2Credentials = new ServiceAccountCredential(credentialInitializer);
  4. Создайте клиент для API назначения ставок в реальном времени.

    Затем вы можете создать свой RealTimeBiddingService :

    var serviceInitializer = new BaseClientService.Initializer
        {
            HttpClientInitializer = oAuth2Credentials,
            ApplicationName = "FirstAPICall"
        };
    
    var realtimebidding = new RealTimeBiddingService(serviceInitializer);
  5. Выполнить операцию

    После того как вы создали экземпляр клиента для подключения к API, вы можете выполнить операцию. В следующем коде перечислены объявления для определенной учетной записи покупателя Авторизованных покупателей, связанной с вашими учетными данными.

    BuyersResource.CreativesResource.ListRequest request =
        realtimebidding.Buyers.Creatives.List(buyerName);
    request.View = BuyersResource.CreativesResource.ListRequest.ViewEnum.FULL;
    
    IList<Creative> creatives = request.Execute().Creatives;
    
    foreach (Creative creative in creatives)
    {
        Console.WriteLine("* Creative name: {0}", creative.Name);
    }

Более подробную информацию об использовании API назначения ставок в реальном времени с C# см. в файле README в примерах API назначения ставок в реальном времени .

Рубин

Вот базовый пример, показывающий, как использовать API назначения ставок в реальном времени с Ruby.

  1. Загрузите и установите клиент Google API Ruby.

    Если вы еще не установили его, загрузите и установите Bundler , затем создайте Gemfile со следующим содержимым:

    source "https://rubygems.org"
    
    ruby "2.6.0"
    
    gem 'google-apis-pubsub_v1', '0.10.0'
    gem 'google-apis-realtimebidding_v1', '~> 0.14.0'
    

    Наконец, запустите следующую команду, чтобы установить библиотеки зависимостей:

    bundle
  2. Настройте свои учетные данные

    Все вызовы API требуют аутентификации; создайте учетные данные, используя адрес электронной почты сервисной учетной записи и файл JSON, описанный выше.

    # Create credentials using the JSON key file.
      auth_options = {
        :json_key_io => File.open(KEY_FILE, "r"),
        :scope => 'https://www.googleapis.com/auth/realtime-bidding'
      }
    
      oauth_credentials = Google::Auth::ServiceAccountCredentials.make_creds(
        options=auth_options
      )
  3. Создайте клиент для AdExchangeBuyer.

    Затем вы можете создать авторизованного клиента покупателя AdExchange, используя учетные данные:

    # Create the service and set credentials
      realtimebidding = (
        Google::Apis::RealtimebiddingV1::RealtimeBiddingService.new
      )
      realtimebidding.authorization = oauth_credentials
      realtimebidding.authorization.fetch_access_token!
  4. Выполнить операцию

    После того как вы создали экземпляр клиента для подключения к API, вы можете выполнить операцию. Следующий код возвращает все креативы данного Покупателя.

    # Call the buyers.creatives.list method to get list of creatives for given buyer.
        creatives_list = realtimebidding.list_buyer_creatives(
            BUYER_NAME, view: 'FULL')
    
        if creatives_list.creatives.any?
          puts "Found the following creatives for buyer '%s':" % BUYER_NAME
          creatives_list.creatives.each do |creative|
            puts "* Creative name: #{creative.name}"
          end
        else
          puts "No creatives were found that were associated with buyer '%s'" % BUYER_NAME
        end

Более подробную информацию об использовании API назначения ставок в реальном времени с Ruby см. в файле README в примерах API назначения ставок в реальном времени .

API для покупателей Ad Exchange II

Джава

/*
 * Copyright (c) 2017 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 * in compliance with the License. You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software distributed under the License
 * is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
 * or implied. See the License for the specific language governing permissions and limitations under
 * the License.
 */

package com.google.api.services.samples.adexchangebuyer.cmdline.v2_x;

import com.google.api.client.googleapis.services.json.AbstractGoogleJsonClient;
import com.google.api.services.adexchangebuyer2.v2beta1.AdExchangeBuyerII;
import com.google.api.services.adexchangebuyer2.v2beta1.model.AbsoluteDateRange;
import com.google.api.services.adexchangebuyer2.v2beta1.model.Client;
import com.google.api.services.adexchangebuyer2.v2beta1.model.Date;
import com.google.api.services.adexchangebuyer2.v2beta1.model.FilterSet;
import com.google.api.services.adexchangebuyer2.v2beta1.model.RealtimeTimeRange;
import com.google.api.services.adexchangebuyer2.v2beta1.model.RelativeDateRange;
import com.google.api.services.samples.adexchangebuyer.cmdline.BaseSample;
import java.io.IOException;
import java.util.List;

/**
 * This sample illustrates how to retrieve all Bidder-level Filter Sets.
 */
public class GetAllBidderLevelFilterSets extends BaseSample {
  @Override
  public ClientType getClientType() {
    return ClientType.ADEXCHANGEBUYERII;
  }

  @Override
  public String getName() {
    return "Get All Bidder-level Filter Sets.";
  }

  @Override
  public String getDescription() {
    return "Lists Filter Sets associated with the given Bidder.";
  }

  @Override
  public void execute(AbstractGoogleJsonClient client) throws IOException {
    AdExchangeBuyerII adXClient = (AdExchangeBuyerII) client;
    String bidderResourceId = getStringInput("bidderResourceId", "Enter the Bidder's resource ID");
    String ownerName = String.format("bidders/%s", bidderResourceId);
    List<FilterSet> allFilterSets = adXClient.bidders().filterSets().list(ownerName).execute()
        .getFilterSets();

    if (allFilterSets != null && allFilterSets.size() > 0) {
      System.out.println("========================================");
      System.out.printf("Listing of Filter Sets associated with Bidder \"%s\"%n", ownerName);
      System.out.println("========================================");
      for (FilterSet filterSet : allFilterSets) {
        System.out.printf("* Filter Set name: %s%n", filterSet.getName());
        AbsoluteDateRange absDateRange = filterSet.getAbsoluteDateRange();
        if(absDateRange != null) {
          System.out.println("AbsoluteDateRange");
          System.out.printf("\tStart date: %s%n",
              convertDateToString(absDateRange.getStartDate()));
          System.out.printf("\tEnd date: %s%n",
              convertDateToString(absDateRange.getEndDate()));
        }
        RelativeDateRange relDateRange = filterSet.getRelativeDateRange();
        if(relDateRange != null) {
          Integer offset = relDateRange.getOffsetDays();
          System.out.println("RelativeDateRange");
          System.out.printf("\tOffset days: %s%n", offset != null ? offset : 0);
          System.out.printf("\tDuration days: %s%n", relDateRange.getDurationDays());
        }
        RealtimeTimeRange rtTimeRange = filterSet.getRealtimeTimeRange();
        if(rtTimeRange != null) {
          System.out.println("RealtimeTimeRange");
          System.out.printf("\tStart timestamp: %s%n", rtTimeRange.getStartTimestamp());
        }
        String timeSeriesGranularity = filterSet.getTimeSeriesGranularity();
        if(timeSeriesGranularity != null) {
          System.out.printf("Time series granularity: %s%n", timeSeriesGranularity);
        }
        String format = filterSet.getFormat();
        if(format != null) {
          System.out.printf("\tFormat: %s%n", format);
        }
        String environment = filterSet.getEnvironment();
        if(environment != null) {
          System.out.printf("Environment: %s%n", environment);
        }
        List<String> platforms = filterSet.getPlatforms();
        if(platforms != null) {
          System.out.println("Platforms:");
          for(String platform : platforms) {
            System.out.printf("\t%s%n", platform);
          }
        }
        List<Integer> sellerNetworkIds = filterSet.getSellerNetworkIds();
        if(filterSet.getSellerNetworkIds() != null) {
          System.out.println("Seller network IDS:");
          for(Integer sellerNetworkId : sellerNetworkIds) {
            System.out.printf("\t%d%n", sellerNetworkId);
          }
        }
      }
    } else {
      System.out.printf("No Filter Sets were found associated with Bidder \"%s\"%n", ownerName);
    }
  }

  private String convertDateToString(Date date) {
    return String.format("%d%02d%02d", date.getYear(), date.getMonth(), date.getDay());
  }
}

Питон

#!/usr/bin/python
#
# Copyright 2017 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""This example lists bidder-level filter sets."""


import argparse
import os
import pprint
import sys

sys.path.insert(0, os.path.abspath('..'))

from googleapiclient.errors import HttpError
import samples_util


_OWNER_NAME_TEMPLATE = 'bidders/{bidders_resource_id}'

DEFAULT_BIDDER_RESOURCE_ID = 'ENTER_BIDDER_RESOURCE_ID_HERE'


def main(ad_exchange_buyer, owner_name):
  try:
    # Construct and execute the request.
    filter_sets = ad_exchange_buyer.bidders().filterSets().list(
        ownerName=owner_name).execute()
    print(f'Listing FilterSets for bidder: "{owner_name}".')
    pprint.pprint(filter_sets)
  except HttpError as e:
    print(e)


if __name__ == '__main__':
  parser = argparse.ArgumentParser(
      description='Creates a bidder-level filter set with the specified options'
  )
  # Required fields.
  parser.add_argument(
      '-b', '--bidder_resource_id', default=DEFAULT_BIDDER_RESOURCE_ID,
      help=('The resource ID of the bidders resource for which the filter '
            'sets were created. This will be used to construct the ownerName '
            'used as a path parameter for filter set requests. For additional '
            'information on how to configure the ownerName path parameter, '
            'see: https://developers.google.com/authorized-buyers/apis/'
            'reference/rest/v2beta1/bidders.filterSets/list'
            '#body.PATH_PARAMETERS.owner_name'))

  args = parser.parse_args()

  try:
    service = samples_util.GetService('v2beta1')
  except IOError as ex:
    print(f'Unable to create adexchangebuyer service - {ex}')
    print('Did you specify the key file in samples_util.py?')
    sys.exit(1)

  main(service, _OWNER_NAME_TEMPLATE.format(
           bidders_resource_id=args.bidder_resource_id))

PHP

<?php
/**
 * Copyright 2017 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

require_once __DIR__ . '/../../BaseExample.php';

/**
 * This example illustrates how to retrieve all Bidder-level Filter Sets.
 */
class ListBidderLevelFilterSets extends BaseExample {

  /**
   * @see BaseExample::getInputParameters()
   */
  protected function getInputParameters() {
    return [
        [
            'name' => 'bidderResourceId',
            'display' => 'Bidder Resource ID',
            'required' => true
        ]
    ];
  }

  /**
   * @see BaseExample::run()
   */
  public function run() {
    $values = $this->formValues;
    $ownerName = sprintf(
        'bidders/%s',
        $values['bidderResourceId']
    );
    $result = $this->service->bidders_filterSets
        ->listBiddersFilterSets($ownerName);
    print sprintf(
        '<h2>Listing Bidder-level Filter Sets for ownerName "%s"</h2>',
         $ownerName
    );
    if (empty($result['filterSets'])) {
      print '<p>No Bidder-level Filter Sets found.</p>';
    } else {
      foreach ($result['filterSets'] as $filterSets) {
        $this->printResult($filterSets);
      }
    }
  }

  /**
   * @see BaseExample::getClientType()
   */
  public function getClientType() {
    return ClientType::AdExchangeBuyerII;
  }

  /**
   * @see BaseExample::getName()
   */
  public function getName() {
    return 'RTB Troubleshooting: List Bidder-level Filter Sets';
  }
}

.СЕТЬ

/* Copyright 2017, Google Inc. All Rights Reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

using Google.Apis.AdExchangeBuyerII.v2beta1;
using Google.Apis.AdExchangeBuyerII.v2beta1.Data;
using Google.Apis.Services;

using System;
using System.Collections.Generic;

namespace Google.Apis.AdExchangeBuyer.Examples.v2_x
{
    /// <summary>
    /// Retrieves the bidder-level filter sets for the given bidder resource ID.
    /// </summary>
    public class ListBidderLevelFilterSets : ExampleBase
    {
        /// <summary>
        /// Main method, to run this code example as a standalone application.
        /// </summary>
        /// <param name="args">The command line arguments</param>
        public static void Main(string[] args)
        {
            AdExchangeBuyerIIService service = Utilities.GetV2Service();
            ExampleBase example = new ListBidderLevelFilterSets();
            Console.WriteLine(example.Description);

            example.Run(service);
        }

        /// <summary>
        /// Returns a description about the code example.
        /// </summary>
        public override string Description
        {
            get { return "This code example lists all bidder-level filter sets for the given " +
                    "bidder resource ID."; }
        }

        /// <summary>
        /// Runs the code example.
        /// </summary>
        /// <param name="service">An authenticated AdExchangeBuyerIIService</param>
        public override void Run(BaseClientService service)
        {
            AdExchangeBuyerIIService adXService = (AdExchangeBuyerIIService)service;
            string bidderResourceId = "INSERT_BIDDER_RESOURCE_ID_HERE";
            string ownerName = String.Format("bidders/{0}", bidderResourceId);

            ListFilterSetsResponse response = adXService.Bidders.FilterSets.List(ownerName)
                .Execute();

            Console.WriteLine("========================================\n");
            Console.WriteLine("Listing of filter sets associated with owner name \"{0}\"",
                ownerName);
            Console.WriteLine("========================================\n");

            if (response.FilterSets.Count == 0)
            {
                Console.WriteLine("No filter sets found.");
            } else
            {
                foreach (FilterSet filterSet in response.FilterSets)
                {
                    Console.WriteLine("* Name: {0}", filterSet.Name);
                    AbsoluteDateRange absDateRange = filterSet.AbsoluteDateRange;
                    if (absDateRange != null)
                    {
                        Console.WriteLine("\tAbsoluteDateRange:");
                        Date startDate = absDateRange.StartDate;
                        Console.WriteLine("\t\tStartDate:");
                        Console.WriteLine("\t\t\tYear: {0}", startDate.Year);
                        Console.WriteLine("\t\t\tMonth: {0}", startDate.Month);
                        Console.WriteLine("\t\t\tDay: {0}", startDate.Day);
                        Date endDate = absDateRange.EndDate;
                        Console.WriteLine("\t\tEndDate:");
                        Console.WriteLine("\t\t\tYear: {0}", endDate.Year);
                        Console.WriteLine("\t\t\tMonth: {0}", endDate.Month);
                        Console.WriteLine("\t\t\tDay: {0}", endDate.Day);
                    }
                    RelativeDateRange relDateRange = filterSet.RelativeDateRange;
                    if (relDateRange != null)
                    {
                        Console.WriteLine("\tRelativeDateRange:");
                        Console.WriteLine("\t\tOffsetDays: {0}", relDateRange.OffsetDays);
                        Console.WriteLine("\t\tDurationDays: {0}", relDateRange.DurationDays);
                    }
                    RealtimeTimeRange rtTimeRange = filterSet.RealtimeTimeRange;
                    if (rtTimeRange != null)
                    {
                        Console.WriteLine("\tRealtimeTimeRange:");
                        Console.WriteLine("\t\tStartTimestamp: {0}", rtTimeRange.StartTimestamp);
                    }
                    String timeSeriesGranularity = filterSet.TimeSeriesGranularity;
                    if (timeSeriesGranularity != null)
                    {
                        Console.WriteLine("\tTimeSeriesGranularity: {0}", timeSeriesGranularity);
                    }
                    IList<String> formats = filterSet.Formats;
                    if (formats != null)
                    {
                        Console.WriteLine("\tFormats:");
                        foreach (string format in formats)
                        {
                            Console.WriteLine("\t\t{0}", format);
                        }
                    }
                    String environment = filterSet.Environment;
                    if (environment != null)
                    {
                        Console.WriteLine("\tEnvironment: {0}", environment);
                    }
                    IList<string> platforms = filterSet.Platforms;
                    if (platforms != null)
                    {
                        Console.WriteLine("\tPlatforms:");
                        foreach (string platform in platforms)
                        {
                            Console.WriteLine("\t\t{0}", platform);
                        }
                    }
                    IList<int?> sellerNetworkIds = filterSet.SellerNetworkIds;
                    if (sellerNetworkIds != null)
                    {
                        Console.WriteLine("\tSellerNetworkIds:");
                        foreach (int? sellerNetworkId in sellerNetworkIds)
                        {
                            Console.WriteLine("\t\t{0}", sellerNetworkId);
                        }
                    }
                }
            }
        }

        public override ClientType getClientType()
        {
            return ClientType.ADEXCHANGEBUYERII;
        }
    }
}

Рубин

#!/usr/bin/env ruby
# Encoding: utf-8
#
# Copyright:: Copyright 2017, Google Inc. All Rights Reserved.
#
# License:: Licensed under the Apache License, Version 2.0 (the "License");
#           you may not use this file except in compliance with the License.
#           You may obtain a copy of the License at
#
#           http://www.apache.org/licenses/LICENSE-2.0
#
#           Unless required by applicable law or agreed to in writing, software
#           distributed under the License is distributed on an "AS IS" BASIS,
#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
#           implied.
#           See the License for the specific language governing permissions and
#           limitations under the License.
#
# Lists the filter sets for a given bidder.
#
# Tags: Bidders.FilterSets.list

require 'optparse'

require_relative '../samples_util'


def list_bidder_level_filter_sets(ad_exchange_buyer, owner_name, page_size)
  begin
    response = ad_exchange_buyer.list_bidder_filter_sets(
        owner_name, page_size: page_size
    )

    unless response.filter_sets.nil?
      puts 'Found the following filter sets for bidder %s:' % owner_name
      response.filter_sets.each do |filter_set|
        puts '* Filter set name: %s' % filter_set.name
        if !filter_set.absolute_date_range.nil?
          abs_date_range = filter_set.absolute_date_range
          start_date = abs_date_range.start_date
          end_date = abs_date_range.end_date
          puts "\tAbsolute date range:"
          puts "\t\tStart date: %s-%s-%s" % [start_date.year, start_date.month,
              start_date.day]
          puts "\t\tEnd date: %s-%s-%s" % [end_date.year, end_date.month,
              end_date.day]
        end
        unless filter_set.realtime_time_range.nil?
          realtime_time_range = filter_set.realtime_time_range
          puts "\tRealtime time range:"
          puts "\t\tStart timestamp: %s" % realtime_time_range.start_timestamp
        end
        unless filter_set.relative_date_range.nil?
          relative_date_range = filter_set.relative_date_range
          puts "\tRelative date range:"
          puts "\t\tOffset days: %s" % relative_date_range.offset_days
          puts "\t\tDuration days: %s" % relative_date_range.duration_days
        end
        unless filter_set.time_series_granularity.nil?
          puts "\tTime series granularity: %s" %
              filter_set.time_series_granularity
        end
        unless filter_set.format.nil?
          puts "\tFormat: %s" % filter_set.format
        end
        unless filter_set.environment.nil?
          puts "\tEnvironment: %s" % filter_set.environment
        end
        unless filter_set.platforms.nil?
          puts "\tPlatforms: %s" % filter_set.platforms.inspect
        end
        unless filter_set.seller_network_ids.nil?
          puts "\tSeller network IDs: %s" %
              filter_set.seller_network_ids.inspect
        end
      end
    else
      puts 'No filter sets found for bidder %s.' % owner_name
    end
  rescue Google::Apis::ServerError => e
    raise "The following server error occured:\n%s" % e.message
  rescue Google::Apis::ClientError => e
    raise "Invalid client request:\n%s" % e.message
  rescue Google::Apis::AuthorizationError => e
    raise "Authorization error occured:\n%s" % e.message
  end
end


if __FILE__ == $0
  begin
    # Retrieve the service used to make API requests.
    service = get_service(ADEXCHANGEBUYER_V2BETA1)
  rescue ArgumentError => e
    raise 'Unable to create service, with error message: %s' % e.message
  rescue Signet::AuthorizationError => e
    raise ('Unable to create service, was the KEY_FILE in samples_util.rb ' +
           'set? Error message: %s') % e.message
  end

  # Set options and default values for fields used in this example.
  options = [
    Option.new(
      'bidder_resource_id',
      ('The resource ID of the bidders resource for which the filter ' +
       'sets were created. This will be used to construct the ownerName ' +
       'used as a path parameter for filter set requests. For additional ' +
       'information on how to configure the ownerName path parameter, ' +
       'see: https://developers.google.com/authorized-buyers/apis/reference/' +
       'rest/v2beta1/bidders.filterSets/list#body.PATH_PARAMETERS.owner_name'),
      :short_alias => 'b', :required => true,
      :default_value => nil  # Insert default value here.
    ),
    Option.new(
      'max_page_size',
      'The maximum number of entries returned on one result page.',
      :type => Integer, :short_alias => 'm', :required => true,
      :default_value => MAX_PAGE_SIZE
    )
  ]

  # Parse options.
  parser = Parser.new(options)
  opts = parser.parse(ARGV)

  owner_name = 'bidders/%s' % opts['bidder_resource_id']

  list_bidder_level_filter_sets(service, owner_name, opts['max_page_size'])
end

Следующие шаги

Принять участие в опросе

Помогите нам улучшить эту документацию: расскажите нам, что сработало, а что мы упустили, заполнив небольшой опрос .