시작하기

Authorized Buyers와 프로그래매틱 방식으로 상호작용하는 데 사용할 수 있는 API는 세 가지가 있습니다.

다음은 Authorized Buyers API를 사용하여 완료할 수 있는 작업의 몇 가지 예입니다.

  • 실시간 입찰 계정 정보에 액세스합니다.
  • 검토 중인 광고 소재를 제출하고 관리합니다.
  • 실시간 입찰 문제 해결 측정항목을 가져옵니다.
  • Authorized Buyers 사용자 목록 관리
  • 사전 타겟팅 구성을 관리합니다.
  • Marketplace에 대한 클라이언트 액세스를 구성합니다.
  • Marketplace에서 거래 제안서를 찾고 관리하세요.

Authorized Buyers에 대해 잘 모르는 경우 Authorized Buyers 고객센터UI에서 자세히 알아보세요.

인증 설정

Google API는 인증 및 승인에 OAuth 2.0 프로토콜을 사용합니다. OAuth 2.0을 사용하여 실시간 입찰 API의 인증을 설정하는 방법은 다음과 같습니다.

이 예에서는 서비스 계정을 사용합니다. 액세스 제어에 대한 자세한 내용은 Google Cloud Identity Access Management 문서를 참조하세요.

  1. Google API 콘솔에서 사용 설정된 API 페이지로 이동합니다.

  2. 프로젝트 드롭다운에서 프로젝트를 선택하거나 새 프로젝트를 만듭니다.

  3. 사용 설정된 API 목록에 Real-timeBidding API가 표시되는지 확인합니다. 목록에 없으면 Google API 탭을 클릭하고 Real-time 입찰 API를 검색하여 선택한 후 API 사용 설정을 클릭합니다.

  4. 그런 다음 왼쪽 사이드바에서 사용자 인증 정보를 선택합니다.

  5. 사용자 인증 정보 만들기 드롭다운을 선택한 후 서비스 계정 키를 선택합니다.

  6. 서비스 계정 드롭다운에서 새 서비스 계정을 선택합니다.

  7. 서비스 계정의 이름을 입력합니다. 이름과 프로젝트 이름에서 서비스 계정 ID가 자동으로 생성됩니다.

  8. 서비스 계정 ID를 기록해 둡니다. 11단계에서 Authorized Buyers UI의 새 서비스 계정에 대한 액세스 권한을 부여하는 데 필요합니다.

  9. 권장 JSON 파일을 키 유형으로 선택합니다.

  10. 만들기를 클릭합니다. 계정의 공개 키/비공개 키 쌍이 포함된 JSON 파일이 다운로드 폴더에 저장됩니다. 생성된 JSON 파일을 안전한 장소에 보관하세요.

  11. 서비스 계정이 작동하려면 Authorized Buyers UI에서 서비스 계정에 액세스 권한을 부여해야 합니다. 설정 > 계정 설정을 선택한 후 사용자 관리 > 계정 사용자를 선택하고 +서비스 계정을 클릭합니다. 위의 8단계에서 기록한 서비스 계정 ID를 입력합니다. 이렇게 하면 서비스 계정 역할을 가진 신규 사용자가 생성됩니다.

권한을 변경해야 하는 경우 클라우드 프로젝트에 대한 관리 액세스 권한이 여러 사용자에게 있는지 확인하세요.

API 액세스 요청

OAuth 2.0 승인 흐름을 단계별로 실행할 때 애플리케이션은 범위를 지정하여 다른 Google 계정을 대신하여 특정 기능에 대한 액세스를 요청할 수 있습니다. 다음 범위를 사용하여 Authorized Buyers 계정을 대신하여 Authorized Buyers API에 대한 읽기/쓰기 액세스 권한을 얻습니다.

  • Marketplace API: https://www.googleapis.com/auth/authorized-buyers-marketplace
  • 실시간 입찰 API: https://www.googleapis.com/auth/realtime-bidding
  • Ad Exchange 구매자 API II: https://www.googleapis.com/auth/adExchange.buyer

API 호출

다음은 지원되는 언어로 시작할 때 사용할 수 있는 샘플입니다.

Marketplace API

Java

/*
 * Copyright 2021 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.google.api.services.samples.authorizedbuyers.marketplace.v1;

import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpRequestInitializer;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.JsonFactory;
import com.google.api.client.json.gson.GsonFactory;
import com.google.api.services.authorizedbuyersmarketplace.v1.AuthorizedBuyersMarketplace;
import com.google.api.services.authorizedbuyersmarketplace.v1.AuthorizedBuyersMarketplaceScopes;
import com.google.api.services.authorizedbuyersmarketplace.v1.model.Client;
import com.google.auth.http.HttpCredentialsAdapter;
import com.google.auth.oauth2.GoogleCredentials;
import com.google.auth.oauth2.ServiceAccountCredentials;
import java.io.FileInputStream;
import java.io.IOException;
import java.util.HashSet;
import java.util.List;
import java.util.Set;

/**
 * A sample application that authenticates and runs a request against the Authorized Buyers
 * Marketplace API.
 */
public class FirstApiRequest {

  /**
   * Be sure to specify the name of your application. If the application name is {@code null} or
   * blank, the application will log a warning. Suggested format is "MyCompany-ProductName/1.0".
   */
  private static final String APPLICATION_NAME = "APPLICATION_NAME_HERE";

  // Full path to JSON Key file - include file name.
  private static final java.io.File JSON_FILE = new java.io.File("INSERT_PATH_TO_JSON_FILE");

  // Name of the buyer resource for which the API call is being made.
  private static final String BUYER_NAME = "INSERT_BUYER_RESOURCE_NAME";

  // Global instance of the HTTP transport.
  private static HttpTransport httpTransport;

  // Global instance of the JSON factory.
  private static final JsonFactory jsonFactory = GsonFactory.getDefaultInstance();

  public static void main(String[] args) throws Exception {
    // Create credentials using the JSON key file.
    GoogleCredentials credentials = null;

    try (FileInputStream serviceAccountStream = new FileInputStream((JSON_FILE))) {
      Set<String> scopes = new HashSet<>(AuthorizedBuyersMarketplaceScopes.all());
      credentials = ServiceAccountCredentials.fromStream(serviceAccountStream).createScoped(scopes);
    } catch (IOException ex) {
      System.out.println("Can't complete authorization step. Did you specify a JSON key file?");
      System.out.println(ex);
      System.exit(1);
    }

    HttpRequestInitializer requestInitializer = new HttpCredentialsAdapter(credentials);
    httpTransport = GoogleNetHttpTransport.newTrustedTransport();

    // Use the credentials to create a client for the API service.
    AuthorizedBuyersMarketplace marketplaceClient =
        new AuthorizedBuyersMarketplace.Builder(httpTransport, jsonFactory, requestInitializer)
            .setApplicationName(APPLICATION_NAME)
            .build();

    // Call the buyers.clients.list method to get a list of clients for the given buyer.
    List<Client> clients =
        marketplaceClient.buyers().clients().list(BUYER_NAME).execute().getClients();

    if (clients != null && clients.size() > 0) {
      System.out.printf("Listing of clients associated with buyer \"%s\"%n", BUYER_NAME);
      for (Client client : clients) {
        System.out.printf("* Client name: %s\n", client.getName());
      }
    } else {
      System.out.printf(
          "No clients were found that were associated with buyer \"%s\"%n.", BUYER_NAME);
    }
  }
}

Python

#!/usr/bin/python
#
# Copyright 2022 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Sample application that authenticates and makes an API request."""

import pprint
from googleapiclient.discovery import build
from google.oauth2 import service_account

# A Service Account key file can be generated via the Google Developers
# Console.
KEY_FILE = 'PATH_TO_JSON_KEY_FILE'  # Path to Service Account JSON key file.

# Authorized Buyers Marketplace API authorization scope.
SCOPE = 'https://www.googleapis.com/auth/authorized-buyers-marketplace'
VERSION = 'v1'  # Version of Authorized Buyers Marketplace API to use.

# Name of the buyer resource for which the API call is being made.
BUYER_NAME = 'BUYER_RESOURCE_NAME'


def main():
  # Create credentials using the Service Account JSON key file.
  credentials = service_account.Credentials.from_service_account_file(
      KEY_FILE, scopes=[SCOPE])

  # Build a client for the authorizedbuyersmarketplace API service.
  marketplace = build('authorizedbuyersmarketplace', VERSION, credentials=credentials)

  # Call the buyers.clients.list method to get a list of clients for the
  # given buyer.
  request = marketplace.buyers().clients().list(parent=BUYER_NAME)

  pprint.pprint(request.execute())


if __name__ == '__main__':
  main()

.NET

/* Copyright 2021 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

using Google.Apis.AuthorizedBuyersMarketplace.v1;
using Google.Apis.AuthorizedBuyersMarketplace.v1.Data;
using Google.Apis.Auth.OAuth2;
using Google.Apis.Json;
using Google.Apis.Services;

using System;
using System.Collections.Generic;

namespace Google.Apis.AuthorizedBuyersMarketplace.Examples.v1
{
    /// <summary>
    /// Self contained sample to return a list of clients for a given buyer account.
    /// Primarily used by the Getting Started guide:
    /// https://developers.google.com/authorized-buyers/apis/getting_started
    ///
    /// Note: To run this sample, you will need to configure it as the StartupObject in
    /// Google.Apis.AuthorizedBuyersMarketplace.Examples.csproj.
    /// </summary>
    internal class FirstApiRequest
    {
        private static void Main(string[] args)
        {
            // See the README.md for details of these fields.
            // Retrieved from https://console.developers.google.com
            var ServiceKeyFilePath = "PATH TO JSON KEY FILE HERE";

            // Name of the buyer resource for which the API call is being made.
            var buyerName = "INSERT_BUYER_RESOURCE_NAME_HERE";

            // Retrieve credential parameters from the key JSON file.
            var credentialParameters = NewtonsoftJsonSerializer.Instance
                .Deserialize<JsonCredentialParameters>(
                    System.IO.File.ReadAllText(ServiceKeyFilePath));

            // Create the credentials.
            var credentialInitializer = new ServiceAccountCredential.Initializer(
                    credentialParameters.ClientEmail)
                {
                    Scopes = new[]
                    {
                        AuthorizedBuyersMarketplaceService.Scope.AuthorizedBuyersMarketplace
                    }
                }.FromPrivateKey(credentialParameters.PrivateKey);

            var oAuth2Credentials = new ServiceAccountCredential(credentialInitializer);

            // Use the credentials to create a client for the API service.
            var serviceInitializer = new BaseClientService.Initializer
                {
                    HttpClientInitializer = oAuth2Credentials,
                    ApplicationName = "FirstAPICall"
                };

            var mkService = new AuthorizedBuyersMarketplaceService(serviceInitializer);

            // Call the buyers.clients.list method to list clients for the given buyer.
            BuyersResource.ClientsResource.ListRequest request =
                mkService.Buyers.Clients.List(buyerName);

            IList<Client> clients = request.Execute().Clients;

            foreach (Client client in clients)
            {
                Console.WriteLine("* Client name: {0}", client.Name);
            }

            Console.ReadLine();
        }
    }
}

2,399필리핀

<?php

/**
 * Copyright 2022 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * Sample application that authenticates and makes an API request.
 */

namespace Google\Ads\AuthorizedBuyers\Marketplace\Examples\V1;

/**
 * Provide path to client library. See README.md for details.
 */
require_once __DIR__ . '/../../vendor/autoload.php';

use Google_Client;
use Google_Service_AuthorizedBuyersMarketplace;


session_start();

/**
 * You can retrieve this file from the Google Developers Console.
 *
 * See README.md for details.
 */
$keyFileLocation = "INSERT_PATH_TO_JSON_KEYFILE";

/**
 * Name of the buyer resource for which the API call is being made.
 */
$buyerName = "INSERT_BUYER_RESOURCE_NAME";

if ($keyFileLocation === 'INSERT_PATH_TO_JSON_KEYFILE') {
    print "WARNING: Authorization details not provided!\n";
    exit(1);
}

$client = new Google_Client();
$client->setApplicationName('Authorized Buyers Marketplace API PHP Samples');

$service = new Google_Service_AuthorizedBuyersMarketplace($client);

$client->setAuthConfig($keyFileLocation);
$client->addScope('https://www.googleapis.com/auth/authorized-buyers-marketplace');

if ($client->isAccessTokenExpired()) {
    $client->refreshTokenWithAssertion();
}

if ($client->getAccessToken()) {
    // Call the buyers.clients.list method to get a list of clients for the given buyer.
    $result = $service->buyers_clients->listBuyersClients($buyerName);

    print "Clients associated with buyer account\n";
    if (empty($result['clients'])) {
        print "No clients found\n";
        return;
    } else {
        foreach ($result['clients'] as $client) {
            print_r($client);
        }
    }
}

Ruby

#!/usr/bin/env ruby
# Encoding: utf-8
#
# Copyright:: Copyright 2022 Google LLC
#
# License:: Licensed under the Apache License, Version 2.0 (the "License");
#           you may not use this file except in compliance with the License.
#           You may obtain a copy of the License at
#
#           http://www.apache.org/licenses/LICENSE-2.0
#
#           Unless required by applicable law or agreed to in writing, software
#           distributed under the License is distributed on an "AS IS" BASIS,
#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
#           implied.
#           See the License for the specific language governing permissions and
#           limitations under the License.
#
# Sample application that authenticates and makes an API request.

require 'google/apis/authorizedbuyersmarketplace_v1'
require 'googleauth/service_account'

# You can download the JSON keyfile used for authentication from the Google
# Developers Console.
KEY_FILE = 'path_to_key'  # Path to JSON file containing your private key.

# Name of the buyer resource for which the API call is being made.
BUYER_NAME = 'insert_buyer_resource_name'


def first_api_request()
  # Create credentials using the JSON key file.
  auth_options = {
    :json_key_io => File.open(KEY_FILE, "r"),
    :scope => 'https://www.googleapis.com/auth/authorized-buyers-marketplace'
  }

  oauth_credentials = Google::Auth::ServiceAccountCredentials.make_creds(
    options=auth_options
  )

  # Create the service and set credentials
  marketplace = (
    Google::Apis::AuthorizedbuyersmarketplaceV1::AuthorizedBuyersMarketplaceService.new
  )
  marketplace.authorization = oauth_credentials
  marketplace.authorization.fetch_access_token!

  begin
    # Call the buyers.clients.list method to get list of clients for given buyer.
    clients_list = marketplace.list_buyer_clients(BUYER_NAME)

    if clients_list.clients.any?
      puts "Found the following clients for buyer '%s':" % BUYER_NAME
      clients_list.clients.each do |client|
        puts "* Client name: #{client.name}"
      end
    else
      puts "No clients were found that were associated with buyer '%s'" % BUYER_NAME
    end
  rescue Google::Apis::ServerError => e
    raise "The following server error occured:\n%s" % e.message
  rescue Google::Apis::ClientError => e
    raise "Invalid client request:\n%s" % e.message
  rescue Google::Apis::AuthorizationError => e
    raise "Authorization error occured:\n%s" % e.message
  end
end

if __FILE__ == $0
  begin
    first_api_request()
  end
end

Real-time Bidding API

Java

다음은 Java로 실시간 입찰 API를 사용하는 방법을 보여주는 기본적인 예입니다.

  1. Maven 프로젝트 만들기

    pom.xml을 열고 다음 종속 항목을 추가합니다.

    <dependencies>
      <dependency>
        <groupId>com.google.api-client</groupId>
        <artifactId>google-api-client</artifactId>
        <version>1.32.2</version>
      </dependency>
      <dependency>
        <groupId>com.google.apis</groupId>
        <artifactId>google-api-services-pubsub</artifactId>
        <version>v1-rev452-1.25.0</version>
      </dependency>
      <dependency>
        <groupId>com.google.apis</groupId>
        <artifactId>google-api-services-realtimebidding</artifactId>
        <version>v1-rev20220503-1.32.1</version>
      </dependency>
      <dependency>
        <groupId>com.google.auth</groupId>
        <artifactId>google-auth-library-oauth2-http</artifactId>
        <version>1.3.0</version>
      </dependency>
      <dependency>
        <groupId>com.google.code.gson</groupId>
        <artifactId>gson</artifactId>
        <version>2.8.9</version>
      </dependency>
      <dependency>
        <groupId>com.google.http-client</groupId>
        <artifactId>google-http-client-jackson2</artifactId>
        <version>1.40.1</version>
      </dependency>
      <dependency>
        <groupId>joda-time</groupId>
        <artifactId>joda-time</artifactId>
        <version>2.10.13</version>
      </dependency>
      <dependency>
        <groupId>net.sourceforge.argparse4j</groupId>
        <artifactId>argparse4j</artifactId>
        <version>0.9.0</version>
      </dependency>
    </dependencies>
      

  2. 사용자 인증 정보 설정

    모든 API 호출에는 인증이 필요합니다. 위에서 설명한 서비스 계정 JSON 키 파일을 사용하여 Credential를 만드세요.

    GoogleCredentials credentials = null;
    
    try (FileInputStream serviceAccountStream = new FileInputStream((JSON_FILE))) {
      Set<String> scopes = new HashSet<>(RealTimeBiddingScopes.all());
      credentials = ServiceAccountCredentials.fromStream(serviceAccountStream).createScoped(scopes);
    } catch (IOException ex) {
      System.out.println("Can't complete authorization step. Did you specify a JSON key file?");
      System.out.println(ex);
      System.exit(1);
    }
  3. 실시간 입찰 API용 클라이언트 구성

    그런 다음 빌더 패턴을 사용하여 Real-time 입찰 API 클라이언트를 만들면 됩니다.

    
    HttpRequestInitializer requestInitializer = new HttpCredentialsAdapter(credentials);
    httpTransport = GoogleNetHttpTransport.newTrustedTransport();
    
    // Use the credentials to create a client for the API service.
    RealTimeBidding realtimeBidding =
        new RealTimeBidding.Builder(httpTransport, jsonFactory, requestInitializer)
            .setApplicationName(APPLICATION_NAME)
            .build();

  4. 작업 실행

    API에 연결하기 위해 클라이언트를 인스턴스화한 후에는 작업을 수행할 수 있습니다. 다음 코드는 지정된 구매자의 모든 광고 소재를 반환합니다.

        List<Creative> creatives =
            realtimeBidding
                .buyers()
                .creatives()
                .list(BUYER_NAME)
                .setView("FULL")
                .execute()
                .getCreatives();
    
        if (creatives != null && creatives.size() > 0) {
          System.out.printf("Listing of creatives associated with buyer '%s'%n", BUYER_NAME);
          for (Creative creative : creatives) {
            System.out.printf("* Creative name: %s\n", creative.getName());
          }
        } else {
          System.out.printf(
              "No creatives were found that were associated with buyer '%s'%n.", BUYER_NAME);
        }

Java에서 실시간 입찰 API를 사용하는 방법에 대한 자세한 내용은 Real-time 입찰 API 예README 파일을 참조하세요.

Python

다음은 Python으로 실시간 입찰 API를 사용하는 방법을 보여주는 기본적인 예입니다.

  1. Google API Python 클라이언트 다운로드 및 설치

    pip 사용 예:

    $ pip install --upgrade google-api-python-client

  2. 사용자 인증 정보 설정

    API에 대한 모든 호출에는 인증이 필요합니다. 위에서 설명한 서비스 계정 JSON 키 파일을 사용하여 service_account.Credentials 인스턴스를 인스턴스화하세요.

      credentials = service_account.Credentials.from_service_account_file(
          KEY_FILE, scopes=[SCOPE])
  3. Real-timeBidding API용 클라이언트 구성

    그런 다음 승인된 service_account.Credentials 인스턴스를 사용하여 실시간 입찰 API 클라이언트를 만들 수 있습니다.

    realtimebidding = build('realtimebidding', VERSION, credentials=credentials)

  4. 작업 실행

    API에 연결하기 위해 클라이언트를 인스턴스화한 후에는 작업을 수행할 수 있습니다. 다음 코드는 지정된 구매자의 모든 광고 소재를 반환합니다.

    request = realtimebidding.buyers().creatives().list(parent=BUYER_NAME)
    
    pprint.pprint(request.execute())

Python에서 Ad Exchange 구매자 API를 사용하는 방법에 대한 자세한 내용은 실시간 입찰 API 예리드미 파일을 참조하세요.

2,399필리핀

다음은 PHP로 Real-time 입찰 API를 사용하는 방법을 보여주는 기본 예입니다.

  1. 종속 항목 설정

    아직 설치하지 않았다면 Composer를 다운로드하여 설치한 다음 다음과 같은 콘텐츠로 composer.json을 만듭니다.

    {
      "description": "Authorized Buyers Real-Time Bidding API PHP Samples",
      "require": {
        "php": ">=7.2",
        "google/apiclient": "^2.0"
      },
      "require-dev": {
        "squizlabs/php_codesniffer": "3.*"
      },
      "type": "project",
      "homepage": "https://github.com/googleads/authorized-buyers-rtb-api-samples/tree/master/php",
      "license": "Apache-2.0",
      "authors": [
        {
          "name": "Google",
          "homepage": "https://github.com/googleads/authorized-buyers-rtb-api-samples/graphs/contributors"
        }
      ]
    }
    

    마지막으로 다음을 실행하여 종속 항목 라이브러리를 설치합니다.

    composer install
  2. 클라이언트 설정

    Google_Client를 만들고 이를 사용하여 Google_Service_RealTimeBidding를 인스턴스화합니다.

    
    $client = new Google_Client();
    $client->setApplicationName('Authorized Buyers Real-time Bidding API PHP Samples');
    
    $service = new Google_Service_RealTimeBidding($client);
  3. 사용자 인증 정보 설정

    모든 API 호출에는 유효한 액세스 토큰이 필요합니다. OAuth 2.0 흐름을 단계별로 거치도록 클라이언트를 구성합니다.

    
    $client->setAuthConfig($keyFileLocation);
    $client->addScope('https://www.googleapis.com/auth/realtime-bidding');
    
    if ($client->isAccessTokenExpired()) {
        $client->refreshTokenWithAssertion();
    }
  4. 작업 실행

    API에 연결할 클라이언트를 인스턴스화하고 OAuth 2.0을 구성한 후에는 이를 사용하여 API를 호출할 수 있습니다. 다음 코드는 지정된 구매자의 모든 광고 소재를 반환합니다.

    $result = $service->buyers_creatives->listBuyersCreatives($buyerName, $queryParams);
    
    print "Creatives associated with buyer account\n";
    if (empty($result['creatives'])) {
        print "No creatives found\n";
        return;
    } else {
        foreach ($result['creatives'] as $creative) {
            print_r($creative);
        }
    }

PHP와 함께 Ad Exchange 구매자 API를 사용하는 방법에 대한 자세한 내용은 실시간 입찰 API 예리드미 파일을 참조하세요.

.NET

다음은 C#으로 실시간 입찰 API를 사용하는 방법을 보여주는 기본적인 예입니다.

  1. 새 프로젝트 생성

    Visual Studio Code를 열고 새 프로젝트를 만듭니다.

  2. 프로젝트에 필요한 라이브러리 참조 추가

    프로젝트의 *.csproj 파일에 Google.Apis, Google.Apis.Auth, Google.Apis.Core, Google.Apis.Oauth2.v2, Google.Apis.RealTimeBidding.v1에 대한 PackageReference 항목을 추가합니다. 예를 들면 다음과 같습니다.

    <ItemGroup>
      <PackageReference Include="Google.Apis" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Auth" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Core" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Oauth2.v2" Version="1.57.0.1869" />
      <PackageReference Include="Google.Apis.Pubsub.v1" Version="1.57.0.2667" />
      <PackageReference Condition="!Exists('./Google.Apis.RealTimeBidding.v1.csproj')" Include="Google.Apis.RealTimeBidding.v1" Version="1.57.0.2680" />
      <PackageReference Include="log4net" Version="2.0.13" />
      <PackageReference Include="Microsoft.Extensions.Configuration" Version="3.1.4" />
      <PackageReference Include="Microsoft.NETFramework.ReferenceAssemblies" Version="1.0.0">
        <PrivateAssets>all</PrivateAssets>
        <IncludeAssets>runtime; build; native; contentfiles; analyzers</IncludeAssets>
      </PackageReference>
      <PackageReference Include="Mono.Options" Version="6.12.0.148" />
      <PackageReference Include="Newtonsoft.Json" Version="13.0.1" />
    </ItemGroup>

    이러한 종속 항목에 관한 자세한 내용은 https://www.nuget.org/packages/를 참조하세요.

  3. 사용자 인증 정보 설정

    모든 API 호출에는 인증이 필요합니다. 위에서 설명한 서비스 계정 이메일과 JSON 파일을 사용하여 Credential를 만드세요.

    var credentialParameters = NewtonsoftJsonSerializer.Instance
        .Deserialize<JsonCredentialParameters>(
            System.IO.File.ReadAllText(ServiceKeyFilePath));
    
    // Create the credentials.
    var credentialInitializer = new ServiceAccountCredential.Initializer(
            credentialParameters.ClientEmail)
        {
            Scopes = new[] { RealTimeBiddingService.Scope.RealtimeBidding }
        }.FromPrivateKey(credentialParameters.PrivateKey);
    
    var oAuth2Credentials = new ServiceAccountCredential(credentialInitializer);
  4. Real-timeBidding API용 클라이언트 구성

    그런 다음 RealTimeBiddingService를 만들 수 있습니다.

    var serviceInitializer = new BaseClientService.Initializer
        {
            HttpClientInitializer = oAuth2Credentials,
            ApplicationName = "FirstAPICall"
        };
    
    var realtimebidding = new RealTimeBiddingService(serviceInitializer);
  5. 작업 실행

    API에 연결하기 위해 클라이언트를 인스턴스화한 후에는 작업을 수행할 수 있습니다. 다음 코드에는 사용자 인증 정보와 연결된 지정된 Authorized Buyers 구매자 계정의 광고 소재가 나열됩니다.

    BuyersResource.CreativesResource.ListRequest request =
        realtimebidding.Buyers.Creatives.List(buyerName);
    request.View = BuyersResource.CreativesResource.ListRequest.ViewEnum.FULL;
    
    IList<Creative> creatives = request.Execute().Creatives;
    
    foreach (Creative creative in creatives)
    {
        Console.WriteLine("* Creative name: {0}", creative.Name);
    }

C#과 함께 Real-timeBidding API를 사용하는 방법에 대한 자세한 내용은 Real-time 입찰 API 예README 파일을 참조하세요.

Ruby

다음은 Ruby로 실시간 입찰 API를 사용하는 방법을 보여주는 기본 예시입니다.

  1. Google API Ruby 클라이언트 다운로드 및 설치

    아직 설치하지 않았다면 Bundler를 다운로드하여 설치한 후 다음과 같은 콘텐츠가 포함된 Gemfile을 만듭니다.

    source "https://rubygems.org"
    
    ruby "2.6.0"
    
    gem 'google-apis-pubsub_v1', '0.10.0'
    gem 'google-apis-realtimebidding_v1', '~> 0.14.0'
    

    마지막으로 다음을 실행하여 종속 항목 라이브러리를 설치합니다.

    bundle
  2. 사용자 인증 정보 설정

    API에 대한 모든 호출에는 인증이 필요합니다. 위에서 설명한 서비스 계정 이메일과 JSON 파일을 사용하여 사용자 인증 정보를 만드세요.

    # Create credentials using the JSON key file.
      auth_options = {
        :json_key_io => File.open(KEY_FILE, "r"),
        :scope => 'https://www.googleapis.com/auth/realtime-bidding'
      }
    
      oauth_credentials = Google::Auth::ServiceAccountCredentials.make_creds(
        options=auth_options
      )
  3. AdExchangeBuyer에 대한 클라이언트 구성

    그런 다음 사용자 인증 정보를 사용하여 승인된 AdExchange 구매자 클라이언트를 만들 수 있습니다.

    # Create the service and set credentials
      realtimebidding = (
        Google::Apis::RealtimebiddingV1::RealtimeBiddingService.new
      )
      realtimebidding.authorization = oauth_credentials
      realtimebidding.authorization.fetch_access_token!
  4. 작업 실행

    API에 연결하기 위해 클라이언트를 인스턴스화한 후에는 작업을 수행할 수 있습니다. 다음 코드는 지정된 구매자의 모든 광고 소재를 반환합니다.

    # Call the buyers.creatives.list method to get list of creatives for given buyer.
        creatives_list = realtimebidding.list_buyer_creatives(
            BUYER_NAME, view: 'FULL')
    
        if creatives_list.creatives.any?
          puts "Found the following creatives for buyer '%s':" % BUYER_NAME
          creatives_list.creatives.each do |creative|
            puts "* Creative name: #{creative.name}"
          end
        else
          puts "No creatives were found that were associated with buyer '%s'" % BUYER_NAME
        end

Ruby에서 Real-timeBidding API를 사용하는 방법에 대한 자세한 내용은 Real-time 입찰 API 예README 파일을 참조하세요.

Ad Exchange 구매자 API II

Java

/*
 * Copyright (c) 2017 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 * in compliance with the License. You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software distributed under the License
 * is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
 * or implied. See the License for the specific language governing permissions and limitations under
 * the License.
 */

package com.google.api.services.samples.adexchangebuyer.cmdline.v2_x;

import com.google.api.client.googleapis.services.json.AbstractGoogleJsonClient;
import com.google.api.services.adexchangebuyer2.v2beta1.AdExchangeBuyerII;
import com.google.api.services.adexchangebuyer2.v2beta1.model.AbsoluteDateRange;
import com.google.api.services.adexchangebuyer2.v2beta1.model.Client;
import com.google.api.services.adexchangebuyer2.v2beta1.model.Date;
import com.google.api.services.adexchangebuyer2.v2beta1.model.FilterSet;
import com.google.api.services.adexchangebuyer2.v2beta1.model.RealtimeTimeRange;
import com.google.api.services.adexchangebuyer2.v2beta1.model.RelativeDateRange;
import com.google.api.services.samples.adexchangebuyer.cmdline.BaseSample;
import java.io.IOException;
import java.util.List;

/**
 * This sample illustrates how to retrieve all Bidder-level Filter Sets.
 */
public class GetAllBidderLevelFilterSets extends BaseSample {
  @Override
  public ClientType getClientType() {
    return ClientType.ADEXCHANGEBUYERII;
  }

  @Override
  public String getName() {
    return "Get All Bidder-level Filter Sets.";
  }

  @Override
  public String getDescription() {
    return "Lists Filter Sets associated with the given Bidder.";
  }

  @Override
  public void execute(AbstractGoogleJsonClient client) throws IOException {
    AdExchangeBuyerII adXClient = (AdExchangeBuyerII) client;
    String bidderResourceId = getStringInput("bidderResourceId", "Enter the Bidder's resource ID");
    String ownerName = String.format("bidders/%s", bidderResourceId);
    List<FilterSet> allFilterSets = adXClient.bidders().filterSets().list(ownerName).execute()
        .getFilterSets();

    if (allFilterSets != null && allFilterSets.size() > 0) {
      System.out.println("========================================");
      System.out.printf("Listing of Filter Sets associated with Bidder \"%s\"%n", ownerName);
      System.out.println("========================================");
      for (FilterSet filterSet : allFilterSets) {
        System.out.printf("* Filter Set name: %s%n", filterSet.getName());
        AbsoluteDateRange absDateRange = filterSet.getAbsoluteDateRange();
        if(absDateRange != null) {
          System.out.println("AbsoluteDateRange");
          System.out.printf("\tStart date: %s%n",
              convertDateToString(absDateRange.getStartDate()));
          System.out.printf("\tEnd date: %s%n",
              convertDateToString(absDateRange.getEndDate()));
        }
        RelativeDateRange relDateRange = filterSet.getRelativeDateRange();
        if(relDateRange != null) {
          Integer offset = relDateRange.getOffsetDays();
          System.out.println("RelativeDateRange");
          System.out.printf("\tOffset days: %s%n", offset != null ? offset : 0);
          System.out.printf("\tDuration days: %s%n", relDateRange.getDurationDays());
        }
        RealtimeTimeRange rtTimeRange = filterSet.getRealtimeTimeRange();
        if(rtTimeRange != null) {
          System.out.println("RealtimeTimeRange");
          System.out.printf("\tStart timestamp: %s%n", rtTimeRange.getStartTimestamp());
        }
        String timeSeriesGranularity = filterSet.getTimeSeriesGranularity();
        if(timeSeriesGranularity != null) {
          System.out.printf("Time series granularity: %s%n", timeSeriesGranularity);
        }
        String format = filterSet.getFormat();
        if(format != null) {
          System.out.printf("\tFormat: %s%n", format);
        }
        String environment = filterSet.getEnvironment();
        if(environment != null) {
          System.out.printf("Environment: %s%n", environment);
        }
        List<String> platforms = filterSet.getPlatforms();
        if(platforms != null) {
          System.out.println("Platforms:");
          for(String platform : platforms) {
            System.out.printf("\t%s%n", platform);
          }
        }
        List<Integer> sellerNetworkIds = filterSet.getSellerNetworkIds();
        if(filterSet.getSellerNetworkIds() != null) {
          System.out.println("Seller network IDS:");
          for(Integer sellerNetworkId : sellerNetworkIds) {
            System.out.printf("\t%d%n", sellerNetworkId);
          }
        }
      }
    } else {
      System.out.printf("No Filter Sets were found associated with Bidder \"%s\"%n", ownerName);
    }
  }

  private String convertDateToString(Date date) {
    return String.format("%d%02d%02d", date.getYear(), date.getMonth(), date.getDay());
  }
}

Python

#!/usr/bin/python
#
# Copyright 2017 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""This example lists bidder-level filter sets."""


import argparse
import os
import pprint
import sys

sys.path.insert(0, os.path.abspath('..'))

from googleapiclient.errors import HttpError
import samples_util


_OWNER_NAME_TEMPLATE = 'bidders/{bidders_resource_id}'

DEFAULT_BIDDER_RESOURCE_ID = 'ENTER_BIDDER_RESOURCE_ID_HERE'


def main(ad_exchange_buyer, owner_name):
  try:
    # Construct and execute the request.
    filter_sets = ad_exchange_buyer.bidders().filterSets().list(
        ownerName=owner_name).execute()
    print(f'Listing FilterSets for bidder: "{owner_name}".')
    pprint.pprint(filter_sets)
  except HttpError as e:
    print(e)


if __name__ == '__main__':
  parser = argparse.ArgumentParser(
      description='Creates a bidder-level filter set with the specified options'
  )
  # Required fields.
  parser.add_argument(
      '-b', '--bidder_resource_id', default=DEFAULT_BIDDER_RESOURCE_ID,
      help=('The resource ID of the bidders resource for which the filter '
            'sets were created. This will be used to construct the ownerName '
            'used as a path parameter for filter set requests. For additional '
            'information on how to configure the ownerName path parameter, '
            'see: https://developers.google.com/authorized-buyers/apis/'
            'reference/rest/v2beta1/bidders.filterSets/list'
            '#body.PATH_PARAMETERS.owner_name'))

  args = parser.parse_args()

  try:
    service = samples_util.GetService('v2beta1')
  except IOError as ex:
    print(f'Unable to create adexchangebuyer service - {ex}')
    print('Did you specify the key file in samples_util.py?')
    sys.exit(1)

  main(service, _OWNER_NAME_TEMPLATE.format(
           bidders_resource_id=args.bidder_resource_id))

2,399필리핀

<?php
/**
 * Copyright 2017 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

require_once __DIR__ . '/../../BaseExample.php';

/**
 * This example illustrates how to retrieve all Bidder-level Filter Sets.
 */
class ListBidderLevelFilterSets extends BaseExample {

  /**
   * @see BaseExample::getInputParameters()
   */
  protected function getInputParameters() {
    return [
        [
            'name' => 'bidderResourceId',
            'display' => 'Bidder Resource ID',
            'required' => true
        ]
    ];
  }

  /**
   * @see BaseExample::run()
   */
  public function run() {
    $values = $this->formValues;
    $ownerName = sprintf(
        'bidders/%s',
        $values['bidderResourceId']
    );
    $result = $this->service->bidders_filterSets
        ->listBiddersFilterSets($ownerName);
    print sprintf(
        '<h2>Listing Bidder-level Filter Sets for ownerName "%s"</h2>',
         $ownerName
    );
    if (empty($result['filterSets'])) {
      print '<p>No Bidder-level Filter Sets found.</p>';
    } else {
      foreach ($result['filterSets'] as $filterSets) {
        $this->printResult($filterSets);
      }
    }
  }

  /**
   * @see BaseExample::getClientType()
   */
  public function getClientType() {
    return ClientType::AdExchangeBuyerII;
  }

  /**
   * @see BaseExample::getName()
   */
  public function getName() {
    return 'RTB Troubleshooting: List Bidder-level Filter Sets';
  }
}

.NET

/* Copyright 2017, Google Inc. All Rights Reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

using Google.Apis.AdExchangeBuyerII.v2beta1;
using Google.Apis.AdExchangeBuyerII.v2beta1.Data;
using Google.Apis.Services;

using System;
using System.Collections.Generic;

namespace Google.Apis.AdExchangeBuyer.Examples.v2_x
{
    /// <summary>
    /// Retrieves the bidder-level filter sets for the given bidder resource ID.
    /// </summary>
    public class ListBidderLevelFilterSets : ExampleBase
    {
        /// <summary>
        /// Main method, to run this code example as a standalone application.
        /// </summary>
        /// <param name="args">The command line arguments</param>
        public static void Main(string[] args)
        {
            AdExchangeBuyerIIService service = Utilities.GetV2Service();
            ExampleBase example = new ListBidderLevelFilterSets();
            Console.WriteLine(example.Description);

            example.Run(service);
        }

        /// <summary>
        /// Returns a description about the code example.
        /// </summary>
        public override string Description
        {
            get { return "This code example lists all bidder-level filter sets for the given " +
                    "bidder resource ID."; }
        }

        /// <summary>
        /// Runs the code example.
        /// </summary>
        /// <param name="service">An authenticated AdExchangeBuyerIIService</param>
        public override void Run(BaseClientService service)
        {
            AdExchangeBuyerIIService adXService = (AdExchangeBuyerIIService)service;
            string bidderResourceId = "INSERT_BIDDER_RESOURCE_ID_HERE";
            string ownerName = String.Format("bidders/{0}", bidderResourceId);

            ListFilterSetsResponse response = adXService.Bidders.FilterSets.List(ownerName)
                .Execute();

            Console.WriteLine("========================================\n");
            Console.WriteLine("Listing of filter sets associated with owner name \"{0}\"",
                ownerName);
            Console.WriteLine("========================================\n");

            if (response.FilterSets.Count == 0)
            {
                Console.WriteLine("No filter sets found.");
            } else
            {
                foreach (FilterSet filterSet in response.FilterSets)
                {
                    Console.WriteLine("* Name: {0}", filterSet.Name);
                    AbsoluteDateRange absDateRange = filterSet.AbsoluteDateRange;
                    if (absDateRange != null)
                    {
                        Console.WriteLine("\tAbsoluteDateRange:");
                        Date startDate = absDateRange.StartDate;
                        Console.WriteLine("\t\tStartDate:");
                        Console.WriteLine("\t\t\tYear: {0}", startDate.Year);
                        Console.WriteLine("\t\t\tMonth: {0}", startDate.Month);
                        Console.WriteLine("\t\t\tDay: {0}", startDate.Day);
                        Date endDate = absDateRange.EndDate;
                        Console.WriteLine("\t\tEndDate:");
                        Console.WriteLine("\t\t\tYear: {0}", endDate.Year);
                        Console.WriteLine("\t\t\tMonth: {0}", endDate.Month);
                        Console.WriteLine("\t\t\tDay: {0}", endDate.Day);
                    }
                    RelativeDateRange relDateRange = filterSet.RelativeDateRange;
                    if (relDateRange != null)
                    {
                        Console.WriteLine("\tRelativeDateRange:");
                        Console.WriteLine("\t\tOffsetDays: {0}", relDateRange.OffsetDays);
                        Console.WriteLine("\t\tDurationDays: {0}", relDateRange.DurationDays);
                    }
                    RealtimeTimeRange rtTimeRange = filterSet.RealtimeTimeRange;
                    if (rtTimeRange != null)
                    {
                        Console.WriteLine("\tRealtimeTimeRange:");
                        Console.WriteLine("\t\tStartTimestamp: {0}", rtTimeRange.StartTimestamp);
                    }
                    String timeSeriesGranularity = filterSet.TimeSeriesGranularity;
                    if (timeSeriesGranularity != null)
                    {
                        Console.WriteLine("\tTimeSeriesGranularity: {0}", timeSeriesGranularity);
                    }
                    IList<String> formats = filterSet.Formats;
                    if (formats != null)
                    {
                        Console.WriteLine("\tFormats:");
                        foreach (string format in formats)
                        {
                            Console.WriteLine("\t\t{0}", format);
                        }
                    }
                    String environment = filterSet.Environment;
                    if (environment != null)
                    {
                        Console.WriteLine("\tEnvironment: {0}", environment);
                    }
                    IList<string> platforms = filterSet.Platforms;
                    if (platforms != null)
                    {
                        Console.WriteLine("\tPlatforms:");
                        foreach (string platform in platforms)
                        {
                            Console.WriteLine("\t\t{0}", platform);
                        }
                    }
                    IList<int?> sellerNetworkIds = filterSet.SellerNetworkIds;
                    if (sellerNetworkIds != null)
                    {
                        Console.WriteLine("\tSellerNetworkIds:");
                        foreach (int? sellerNetworkId in sellerNetworkIds)
                        {
                            Console.WriteLine("\t\t{0}", sellerNetworkId);
                        }
                    }
                }
            }
        }

        public override ClientType getClientType()
        {
            return ClientType.ADEXCHANGEBUYERII;
        }
    }
}

Ruby

#!/usr/bin/env ruby
# Encoding: utf-8
#
# Copyright:: Copyright 2017, Google Inc. All Rights Reserved.
#
# License:: Licensed under the Apache License, Version 2.0 (the "License");
#           you may not use this file except in compliance with the License.
#           You may obtain a copy of the License at
#
#           http://www.apache.org/licenses/LICENSE-2.0
#
#           Unless required by applicable law or agreed to in writing, software
#           distributed under the License is distributed on an "AS IS" BASIS,
#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
#           implied.
#           See the License for the specific language governing permissions and
#           limitations under the License.
#
# Lists the filter sets for a given bidder.
#
# Tags: Bidders.FilterSets.list

require 'optparse'

require_relative '../samples_util'


def list_bidder_level_filter_sets(ad_exchange_buyer, owner_name, page_size)
  begin
    response = ad_exchange_buyer.list_bidder_filter_sets(
        owner_name, page_size: page_size
    )

    unless response.filter_sets.nil?
      puts 'Found the following filter sets for bidder %s:' % owner_name
      response.filter_sets.each do |filter_set|
        puts '* Filter set name: %s' % filter_set.name
        if !filter_set.absolute_date_range.nil?
          abs_date_range = filter_set.absolute_date_range
          start_date = abs_date_range.start_date
          end_date = abs_date_range.end_date
          puts "\tAbsolute date range:"
          puts "\t\tStart date: %s-%s-%s" % [start_date.year, start_date.month,
              start_date.day]
          puts "\t\tEnd date: %s-%s-%s" % [end_date.year, end_date.month,
              end_date.day]
        end
        unless filter_set.realtime_time_range.nil?
          realtime_time_range = filter_set.realtime_time_range
          puts "\tRealtime time range:"
          puts "\t\tStart timestamp: %s" % realtime_time_range.start_timestamp
        end
        unless filter_set.relative_date_range.nil?
          relative_date_range = filter_set.relative_date_range
          puts "\tRelative date range:"
          puts "\t\tOffset days: %s" % relative_date_range.offset_days
          puts "\t\tDuration days: %s" % relative_date_range.duration_days
        end
        unless filter_set.time_series_granularity.nil?
          puts "\tTime series granularity: %s" %
              filter_set.time_series_granularity
        end
        unless filter_set.format.nil?
          puts "\tFormat: %s" % filter_set.format
        end
        unless filter_set.environment.nil?
          puts "\tEnvironment: %s" % filter_set.environment
        end
        unless filter_set.platforms.nil?
          puts "\tPlatforms: %s" % filter_set.platforms.inspect
        end
        unless filter_set.seller_network_ids.nil?
          puts "\tSeller network IDs: %s" %
              filter_set.seller_network_ids.inspect
        end
      end
    else
      puts 'No filter sets found for bidder %s.' % owner_name
    end
  rescue Google::Apis::ServerError => e
    raise "The following server error occured:\n%s" % e.message
  rescue Google::Apis::ClientError => e
    raise "Invalid client request:\n%s" % e.message
  rescue Google::Apis::AuthorizationError => e
    raise "Authorization error occured:\n%s" % e.message
  end
end


if __FILE__ == $0
  begin
    # Retrieve the service used to make API requests.
    service = get_service(ADEXCHANGEBUYER_V2BETA1)
  rescue ArgumentError => e
    raise 'Unable to create service, with error message: %s' % e.message
  rescue Signet::AuthorizationError => e
    raise ('Unable to create service, was the KEY_FILE in samples_util.rb ' +
           'set? Error message: %s') % e.message
  end

  # Set options and default values for fields used in this example.
  options = [
    Option.new(
      'bidder_resource_id',
      ('The resource ID of the bidders resource for which the filter ' +
       'sets were created. This will be used to construct the ownerName ' +
       'used as a path parameter for filter set requests. For additional ' +
       'information on how to configure the ownerName path parameter, ' +
       'see: https://developers.google.com/authorized-buyers/apis/reference/' +
       'rest/v2beta1/bidders.filterSets/list#body.PATH_PARAMETERS.owner_name'),
      :short_alias => 'b', :required => true,
      :default_value => nil  # Insert default value here.
    ),
    Option.new(
      'max_page_size',
      'The maximum number of entries returned on one result page.',
      :type => Integer, :short_alias => 'm', :required => true,
      :default_value => MAX_PAGE_SIZE
    )
  ]

  # Parse options.
  parser = Parser.new(options)
  opts = parser.parse(ARGV)

  owner_name = 'bidders/%s' % opts['bidder_resource_id']

  list_bidder_level_filter_sets(service, owner_name, opts['max_page_size'])
end

다음 단계

  • 샘플 및 솔루션 개발에 사용할 수 있는 옵션에 대해 자세히 알아보려면 백그라운드 가이드를 참고하세요.

  • 클라이언트 라이브러리를 설정한 후에는 필요에 맞게 코드 샘플을 확장해 보세요.

  • API에 대한 자세한 내용은 작업 중인 버전의 참조 문서를 확인하세요.

  • 도움이 필요한 경우 포럼을 방문하세요.

  • 애플리케이션이 실시간 입찰을 실행할 것으로 예상되는 경우 RTB 프로토콜 문서를 읽어보세요.

  • 성능 팁을 살펴봅니다.

설문조사에 참여하기

이 문서를 개선할 수 있도록 간단한 설문조사를 작성하여 효과적인 부분과 누락된 부분을 알려주세요.