plugin.pb.h

This section contains reference documentation for working with protocol buffer classes in C++.

#include <google/protobuf/compiler/plugin.pb.h>
namespace google::protobuf::compiler

API for protoc plugins.

This file defines a set of protocol message classes which make up the API to protoc code generator plugins. Plugins written in C++ should probably build on the API in plugin.h instead of dealing with the protobuf-level API, but plugins in other languages will need to deal with the raw messages as defined below.

The protocol compiler currently doesn't support auto-generated documentation, hence this page contains no descriptions. This file was generated by the protocol compiler from plugin.proto, whose contents are as follows:

// Protocol Buffers - Google's data interchange format
// Copyright 2008 Google Inc.  All rights reserved.
// https://developers.google.com/protocol-buffers/
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
//     * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//     * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
//     * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

// Author: kenton@google.com (Kenton Varda)
//
// WARNING:  The plugin interface is currently EXPERIMENTAL and is subject to
//   change.
//
// protoc (aka the Protocol Compiler) can be extended via plugins.  A plugin is
// just a program that reads a CodeGeneratorRequest from stdin and writes a
// CodeGeneratorResponse to stdout.
//
// Plugins written using C++ can use google/protobuf/compiler/plugin.h instead
// of dealing with the raw protocol defined here.
//
// A plugin executable needs only to be placed somewhere in the path.  The
// plugin should be named "protoc-gen-$NAME", and will then be used when the
// flag "--${NAME}_out" is passed to protoc.

syntax = "proto2";

package google.protobuf.compiler;
option java_package = "com.google.protobuf.compiler";
option java_outer_classname = "PluginProtos";

option go_package = "google.golang.org/protobuf/types/pluginpb";

import "google/protobuf/descriptor.proto";

// The version number of protocol compiler.
message Version {
  optional int32 major = 1;
  optional int32 minor = 2;
  optional int32 patch = 3;
  // A suffix for alpha, beta or rc release, e.g., "alpha-1", "rc2". It should
  // be empty for mainline stable releases.
  optional string suffix = 4;
}

// An encoded CodeGeneratorRequest is written to the plugin's stdin.
message CodeGeneratorRequest {
  // The .proto files that were explicitly listed on the command-line.  The
  // code generator should generate code only for these files.  Each file's
  // descriptor will be included in proto_file, below.
  repeated string file_to_generate = 1;

  // The generator parameter passed on the command-line.
  optional string parameter = 2;

  // FileDescriptorProtos for all files in files_to_generate and everything
  // they import.  The files will appear in topological order, so each file
  // appears before any file that imports it.
  //
  // protoc guarantees that all proto_files will be written after
  // the fields above, even though this is not technically guaranteed by the
  // protobuf wire format.  This theoretically could allow a plugin to stream
  // in the FileDescriptorProtos and handle them one by one rather than read
  // the entire set into memory at once.  However, as of this writing, this
  // is not similarly optimized on protoc's end -- it will store all fields in
  // memory at once before sending them to the plugin.
  //
  // Type names of fields and extensions in the FileDescriptorProto are always
  // fully qualified.
  repeated FileDescriptorProto proto_file = 15;

  // The version number of protocol compiler.
  optional Version compiler_version = 3;

}

// The plugin writes an encoded CodeGeneratorResponse to stdout.
message CodeGeneratorResponse {
  // Error message.  If non-empty, code generation failed.  The plugin process
  // should exit with status code zero even if it reports an error in this way.
  //
  // This should be used to indicate errors in .proto files which prevent the
  // code generator from generating correct code.  Errors which indicate a
  // problem in protoc itself -- such as the input CodeGeneratorRequest being
  // unparseable -- should be reported by writing a message to stderr and
  // exiting with a non-zero status code.
  optional string error = 1;

  // A bitmask of supported features that the code generator supports.
  // This is a bitwise "or" of values from the Feature enum.
  optional uint64 supported_features = 2;

  // Sync with code_generator.h.
  enum Feature {
    FEATURE_NONE = 0;
    FEATURE_PROTO3_OPTIONAL = 1;
  }

  // Represents a single generated file.
  message File {
    // The file name, relative to the output directory.  The name must not
    // contain "." or ".." components and must be relative, not be absolute (so,
    // the file cannot lie outside the output directory).  "/" must be used as
    // the path separator, not "\".
    //
    // If the name is omitted, the content will be appended to the previous
    // file.  This allows the generator to break large files into small chunks,
    // and allows the generated text to be streamed back to protoc so that large
    // files need not reside completely in memory at one time.  Note that as of
    // this writing protoc does not optimize for this -- it will read the entire
    // CodeGeneratorResponse before writing files to disk.
    optional string name = 1;

// If non-empty, indicates that the named file should already exist, and the
// content here is to be inserted into that file at a defined insertion
// point.  This feature allows a code generator to extend the output
// produced by another code generator.  The original generator may provide
// insertion points by placing special annotations in the file that look
// like:
//   @@protoc_insertion_point(NAME)
// The annotation can have arbitrary text before and after it on the line,
// which allows it to be placed in a comment.  NAME should be replaced with
// an identifier naming the point -- this is what other generators will use
// as the insertion_point.  Code inserted at this point will be placed
// immediately above the line containing the insertion point (thus multiple
// insertions to the same point will come out in the order they were added).
// The double-@ is intended to make it unlikely that the generated code
// could contain things that look like insertion points by accident.
//
// For example, the C++ code generator places the following line in the
// .pb.h files that it generates:
//   // @@protoc_insertion_point(namespace_scope)
// This line appears within the scope of the file's package namespace, but
// outside of any particular class.  Another plugin can then specify the
// insertion_point "namespace_scope" to generate additional classes or
// other declarations that should be placed in this scope.
//
// Note that if the line containing the insertion point begins with
// whitespace, the same whitespace will be added to every line of the
// inserted text.  This is useful for languages like Python, where
// indentation matters.  In these languages, the insertion point comment
// should be indented the same amount as any inserted code will need to be
// in order to work correctly in that context.
//
// The code generator that generates the initial file and the one which
// inserts into it must both run as part of a single invocation of protoc.
// Code generators are executed in the order in which they appear on the
// command line.
//
// If |insertion_point| is present, |name| must also be present.
optional string insertion_point = 2;

// The file contents.
optional string content = 15;

// Information describing the file content being inserted. If an insertion
// point is used, this information will be appropriately offset and inserted
// into the code generation metadata for the generated files.
optional GeneratedCodeInfo generated_code_info = 16;

  }
  repeated File file = 15;
}

Classes in this file

File Members

These definitions are not part of any class.
const ::protobuf::internal::DescriptorTable
descriptor_table_google_2fprotobuf_2fcompiler_2fplugin_2eproto
PROTOBUF_NAMESPACE_CLOSE PROTOBUF_NAMESPACE_OPEN protobuf::compiler::CodeGeneratorRequest *
Arena::CreateMaybeMessage< protobuf::compiler::CodeGeneratorRequest >(Arena * )
protobuf::compiler::CodeGeneratorResponse *
Arena::CreateMaybeMessage< protobuf::compiler::CodeGeneratorResponse >(Arena * )
protobuf::compiler::CodeGeneratorResponse_File *
Arena::CreateMaybeMessage< protobuf::compiler::CodeGeneratorResponse_File >(Arena * )
protobuf::compiler::Version *
Arena::CreateMaybeMessage< protobuf::compiler::Version >(Arena * )
const EnumDescriptor *
GetEnumDescriptor< protobuf::compiler::CodeGeneratorResponse_Feature >()