Grupy informacji o produktach (handel detaliczny)

Grupy informacji o produktach są używane w: kampanii detalicznych Performance Max umożliwiających określenie, które produkty chcesz uwzględnić lub wykluczyć; w każdej grupie plików. W związku z tym grupy informacji o produktach są stosowane na poziomie AssetGroup poziom za pomocą AssetGroupListingGroupFilter obiektów. Przypomina to inne typy kampanii detalicznych, w których grupy są stosowane na poziomie AdGroup.

Wszystkie grupy plików w kampaniach detalicznych Performance Max wymagają prawidłowego produktu drzewo partycji złożone z AssetGroupListingGroupFilter obiektów. Za pomocą jedno drzewo węzłów obejmujące wszystkie produkty z konta Merchant Center, spełnić to wymaganie.

Wskazówka: zobacz, jak utworzyć drzewa podziału produktów za pomocą filtrów grup informacji o produktach na podstawie interaktywnego przewodnika po kampaniach Performance Max, .

Jest to tzw. produkt grup w interfejsie. Możesz grupować Wykorzystując wiele wymiarów, możesz uwzględniać lub wykluczać produkty.

Spójrzmy na poniższe drzewo. Na pierwszym poziomie produkty podzielone według stanu na „Nowy”, „używany” i inne stany produktu. W drugim produkty w innych warunkach produktu zostały podzielone przez markę „CoolBrand” „CheapBrand” i innych marek.

Każdy węzeł w drzewie jest podgrupą lub jednostką, zgodnie z definicją ListingGroupType Podgrupa wprowadza nowy poziom w drzewie, a jednostkami są liście. Każdy podział podrzędny musi zawsze być całkowicie partycjonowany, więc musi zawierać węzeł reprezentujący Inne. W tym przykładzie element główny i stan produktu: (Inne) węzły są podziałami. Taka struktura drzewa z podziałem na podgrupy pozwala na określanie stawek na poziomie jednostki, a także zapewnia i tylko jeden węzeł jednostkowy w drzewie.

Węzły są obiektami instancji ListingGroupInfo , która zawiera element ListingGroupType pole określające, czy a węzły są jednostką lub podgrupą. Ustawianie wartości listing_group w kolumnie ListingGroupInfo aplikacji AdGroupCriterion połączy je z AdGroup

Aby drzewo było prawidłowe, potrzebujesz co najmniej 1 węzła jednostki. Ta jednostka może być główną jednostką który z kolei staje się „Wszystkie produkty”. oddział. Reklamy nie będą się wyświetlać, dopóki nie: utworzyć prawidłowe drzewo grup informacji o produktach.

Grupy informacji o produktach w kampaniach Performance Max

Grupy informacji o produktach w kampaniach Performance Max działają najlepiej z kierowaniem grupami produktów, więc powinno to być lepsze niż kierowanie na pojedyncze osoby. produkty według identyfikatora produktu. Możesz użyć różnych wymiarów takich jak etykiety własne brand [marka] w pliku danych o produktach grupować produkty.

Ważne: grupy informacji o produktach w kampaniach detalicznych Performance Max różnią się od standardowych Kampanie produktowe. Filtrów grup informacji o produktach nie można używać do ustalania stawek (np. w standardowych kampaniach produktowych), ale chcesz raczej uwzględnić lub wykluczyć zestaw produktów.

Przykładowy kod

Java

/**
 * Runs the example.
 *
 * @param googleAdsClient the Google Ads API client.
 * @param customerId the client customer ID.
 * @param assetGroupId the asset group id for the Performance Max campaign.
 * @param replaceExistingTree option to remove existing product tree from the passed in asset
 *     group.
 * @throws GoogleAdsException if an API request failed with one or more service errors.
 */
private void runExample(
    GoogleAdsClient googleAdsClient,
    long customerId,
    long assetGroupId,
    boolean replaceExistingTree)
    throws Exception {
  String assetGroupResourceName = ResourceNames.assetGroup(customerId, assetGroupId);

  List<MutateOperation> operations = new ArrayList<>();

  if (replaceExistingTree) {
    List<AssetGroupListingGroupFilter> existingListingGroupFilters =
        getAllExistingListingGroupFilterAssetsInAssetGroup(
            googleAdsClient, customerId, assetGroupResourceName);

    if (!existingListingGroupFilters.isEmpty()) {
      // A special factory object that ensures the creation of remove operations in the
      // correct order (child listing group filters must be removed before their parents).
      AssetGroupListingGroupFilterRemoveOperationFactory removeOperationFactory =
          new AssetGroupListingGroupFilterRemoveOperationFactory(existingListingGroupFilters);

      operations.addAll(removeOperationFactory.removeAll());
    }
  }

  // Uses a factory to create all the MutateOperations that manipulate a specific
  // AssetGroup for a specific customer. The operations returned by the factory's methods
  // are used to construct a new tree of filters. These filters can have parent-child
  // relationships, and also include a special root that includes all children.
  //
  // When creating these filters, temporary IDs are used to create the hierarchy between
  // each of the nodes in the tree, beginning with the root listing group filter.
  //
  // The factory created below is specific to a customerId and assetGroupId.
  AssetGroupListingGroupFilterCreateOperationFactory createOperationFactory =
      new AssetGroupListingGroupFilterCreateOperationFactory(
          customerId, assetGroupId, TEMPORARY_ID_LISTING_GROUP_ROOT);

  // Creates the operation to add the root node of the tree.
  operations.add(createOperationFactory.createRoot());

  // Creates an operation to add a leaf node for new products.
  ListingGroupFilterDimension newProductDimension =
      ListingGroupFilterDimension.newBuilder()
          .setProductCondition(
              ProductCondition.newBuilder()
                  .setCondition(ListingGroupFilterProductCondition.NEW)
                  .build())
          .build();
  operations.add(
      createOperationFactory.createUnit(
          TEMPORARY_ID_LISTING_GROUP_ROOT, createOperationFactory.nextId(), newProductDimension));

  // Creates an operation to add a leaf node for used products.
  ListingGroupFilterDimension usedProductDimension =
      ListingGroupFilterDimension.newBuilder()
          .setProductCondition(
              ProductCondition.newBuilder()
                  .setCondition(ListingGroupFilterProductCondition.USED)
                  .build())
          .build();
  operations.add(
      createOperationFactory.createUnit(
          TEMPORARY_ID_LISTING_GROUP_ROOT,
          createOperationFactory.nextId(),
          usedProductDimension));

  // This represents the ID of the "other" category in the ProductCondition subdivision. This ID
  // is saved because the node with this ID will be further partitioned, and this ID will serve as
  // the parent ID for subsequent child nodes of the "other" category.
  long otherSubdivisionId = createOperationFactory.nextId();

  // Creates an operation to add a subdivision node for other products in the ProductCondition
  // subdivision.
  ListingGroupFilterDimension otherProductDimension =
      ListingGroupFilterDimension.newBuilder()
          .setProductCondition(ProductCondition.newBuilder().build())
          .build();
  operations.add(
      // Calls createSubdivision because this listing group will have children.
      createOperationFactory.createSubdivision(
          TEMPORARY_ID_LISTING_GROUP_ROOT, otherSubdivisionId, otherProductDimension));

  // Creates an operation to add a leaf node for products with the brand "CoolBrand".
  ListingGroupFilterDimension coolBrandProductDimension =
      ListingGroupFilterDimension.newBuilder()
          .setProductBrand(ProductBrand.newBuilder().setValue("CoolBrand").build())
          .build();
  operations.add(
      createOperationFactory.createUnit(
          otherSubdivisionId, createOperationFactory.nextId(), coolBrandProductDimension));

  // Creates an operation to add a leaf node for products with the brand "CheapBrand".
  ListingGroupFilterDimension cheapBrandProductDimension =
      ListingGroupFilterDimension.newBuilder()
          .setProductBrand(ProductBrand.newBuilder().setValue("CheapBrand").build())
          .build();
  operations.add(
      createOperationFactory.createUnit(
          otherSubdivisionId, createOperationFactory.nextId(), cheapBrandProductDimension));

  // Creates an operation to add a leaf node for other products in the ProductBrand subdivision.
  ListingGroupFilterDimension otherBrandProductDimension =
      ListingGroupFilterDimension.newBuilder()
          .setProductBrand(ProductBrand.newBuilder().build())
          .build();
  operations.add(
      createOperationFactory.createUnit(
          otherSubdivisionId, createOperationFactory.nextId(), otherBrandProductDimension));

  try (GoogleAdsServiceClient googleAdsServiceClient =
      googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
    MutateGoogleAdsRequest request =
        MutateGoogleAdsRequest.newBuilder()
            .setCustomerId(Long.toString(customerId))
            .addAllMutateOperations(operations)
            .build();
    MutateGoogleAdsResponse response = googleAdsServiceClient.mutate(request);
    printResponseDetails(request, response);
  }
}
AddPerformanceMaxProductListingGroupTree.java
      

C#

/// <summary>
/// Runs the code example.
/// </summary>
/// <param name="client">The Google Ads client.</param>
/// <param name="customerId">The Google Ads customer ID.</param>
/// <param name="assetGroupId">The asset group id for the Performance Max campaign.</param>
/// <param name="replaceExistingTree">Option to remove existing product tree
/// from the passed in asset group.</param>
public void Run(
    GoogleAdsClient client,
    long customerId,
    long assetGroupId,
    bool replaceExistingTree)
{
    GoogleAdsServiceClient googleAdsServiceClient =
        client.GetService(Services.V17.GoogleAdsService);

    string assetGroupResourceName = ResourceNames.AssetGroup(customerId, assetGroupId);

    // We use a factory to create all the MutateOperations that manipulate a specific
    // AssetGroup for a specific customer. The operations returned by the factory's methods
    // are used to optionally remove all AssetGroupListingGroupFilters from the tree, and
    // then to construct a new tree of filters. These filters can have a parent-child
    // relationship, and also include a special root that includes all children.
    //
    // When creating these filters, we use temporary IDs to create the hierarchy between
    // the root listing group filter, and the subdivisions and leave nodes beneath that.
    //
    // The factory specific to a customerId and assetGroupId is created below.
    AssetGroupListingGroupFilterCreateOperationFactory createOperationFactory =
        new AssetGroupListingGroupFilterCreateOperationFactory(
            customerId,
            assetGroupId,
            TEMPORARY_ID_LISTING_GROUP_ROOT
        );

    MutateGoogleAdsRequest request = new MutateGoogleAdsRequest
    {
        CustomerId = customerId.ToString()
    };

    if (replaceExistingTree)
    {
        List<AssetGroupListingGroupFilter> existingListingGroupFilters =
            GetAllExistingListingGroupFilterAssetsInAssetGroup(
                client,
                customerId,
                assetGroupResourceName
            );

        if (existingListingGroupFilters.Count > 0)
        {
            // A special factory object that ensures the creation of remove operations in the
            // correct order (child listing group filters must be removed before their parents).
            AssetGroupListingGroupFilterRemoveOperationFactory removeOperationFactory =
                new AssetGroupListingGroupFilterRemoveOperationFactory(
                    existingListingGroupFilters
                );

            request.MutateOperations.AddRange(removeOperationFactory.RemoveAll());
        }
    }

    request.MutateOperations.Add(createOperationFactory.CreateRoot());

    request.MutateOperations.Add(
        createOperationFactory.CreateUnit(
            TEMPORARY_ID_LISTING_GROUP_ROOT,
            createOperationFactory.NextId(),
            new ListingGroupFilterDimension()
            {
                ProductCondition = new ListingGroupFilterDimension.Types.ProductCondition()
                {
                    Condition = ListingGroupFilterProductCondition.New
                }
            }
        )
    );

    request.MutateOperations.Add(
        createOperationFactory.CreateUnit(
            TEMPORARY_ID_LISTING_GROUP_ROOT,
            createOperationFactory.NextId(),
            new ListingGroupFilterDimension()
            {
                ProductCondition = new ListingGroupFilterDimension.Types.ProductCondition()
                {
                    Condition = ListingGroupFilterProductCondition.Used
                }
            }
        )
    );

    // We save this ID because create child nodes underneath it.
    long subdivisionIdConditionOther = createOperationFactory.NextId();

    request.MutateOperations.Add(
        // We're calling CreateSubdivision because this listing group will have children.
        createOperationFactory.CreateSubdivision(
            TEMPORARY_ID_LISTING_GROUP_ROOT,
            subdivisionIdConditionOther,
            new ListingGroupFilterDimension()
            {
                // All sibling nodes must have the same dimension type. We use an empty
                // ProductCondition to indicate that this is an "Other" partition.
                ProductCondition = new ListingGroupFilterDimension.Types.ProductCondition()
            }
        )
    );

    request.MutateOperations.Add(
        createOperationFactory.CreateUnit(
            subdivisionIdConditionOther,
            createOperationFactory.NextId(),
            new ListingGroupFilterDimension()
            {
                ProductBrand = new ProductBrand()
                {
                    Value = "CoolBrand"
                }
            }
        )
    );

    request.MutateOperations.Add(
        createOperationFactory.CreateUnit(
            subdivisionIdConditionOther,
            createOperationFactory.NextId(),
            new ListingGroupFilterDimension()
            {
                ProductBrand = new ProductBrand()
                {
                    Value = "CheapBrand"
                }
            }
        )
    );

    request.MutateOperations.Add(
        createOperationFactory.CreateUnit(
            subdivisionIdConditionOther,
            createOperationFactory.NextId(),
            new ListingGroupFilterDimension()
            {
                ProductBrand = new ProductBrand()
            }
        )
    );

    MutateGoogleAdsResponse response = googleAdsServiceClient.Mutate(request);

    PrintResponseDetails(request, response);
}
AddPerformanceMaxProductListingGroupTree.cs
      

PHP

/**
 * Runs the example.
 *
 * @param GoogleAdsClient $googleAdsClient the Google Ads API client
 * @param int $customerId the customer ID
 * @param int $assetGroupId the asset group ID
 * @param bool $replaceExistingTree true if it should replace the existing listing group
 *     tree on the asset group
 */
public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $assetGroupId,
    bool $replaceExistingTree
) {
    // We create all the mutate operations that manipulate a specific asset group for a specific
    // customer. The operations are used to optionally remove all asset group listing group
    // filters from the tree, and then to construct a new tree of filters. These filters can
    // have a parent-child relationship, and also include a special root that includes all
    // children.
    //
    // When creating these filters, we use temporary IDs to create the hierarchy between
    // the root listing group filter, and the subdivisions and leave nodes beneath that.
    $mutateOperations = [];
    if ($replaceExistingTree === true) {
        $existingListingGroupFilters = self::getAllExistingListingGroupFilterAssetsInAssetGroup(
            $googleAdsClient,
            $customerId,
            ResourceNames::forAssetGroup($customerId, $assetGroupId)
        );
        if (count($existingListingGroupFilters) > 0) {
            $mutateOperations = array_merge(
                $mutateOperations,
                // Ensures the creation of remove operations in the correct order (child listing
                // group filters must be removed before their parents).
                self::createMutateOperationsForRemovingListingGroupFiltersTree(
                    $existingListingGroupFilters
                )
            );
        }
    }

    $mutateOperations[] = self::createMutateOperationForRoot(
        $customerId,
        $assetGroupId,
        self::LISTING_GROUP_ROOT_TEMPORARY_ID
    );

    // The temporary ID to be used for creating subdivisions and units.
    static $tempId = self::LISTING_GROUP_ROOT_TEMPORARY_ID - 1;

    $mutateOperations[] = self::createMutateOperationForUnit(
        $customerId,
        $assetGroupId,
        $tempId--,
        self::LISTING_GROUP_ROOT_TEMPORARY_ID,
        new ListingGroupFilterDimension([
            'product_condition' => new ProductCondition([
                'condition' => ListingGroupFilterProductCondition::PBNEW
            ])
        ])
    );

    $mutateOperations[] = self::createMutateOperationForUnit(
        $customerId,
        $assetGroupId,
        $tempId--,
        self::LISTING_GROUP_ROOT_TEMPORARY_ID,
        new ListingGroupFilterDimension([
            'product_condition' => new ProductCondition([
                'condition' => ListingGroupFilterProductCondition::USED
            ])
        ])
    );

    // We save this ID to create child nodes underneath it.
    $conditionOtherSubdivisionId = $tempId--;

    // We're calling createMutateOperationForSubdivision() because this listing group will
    // have children.
    $mutateOperations[] = self::createMutateOperationForSubdivision(
        $customerId,
        $assetGroupId,
        $conditionOtherSubdivisionId,
        self::LISTING_GROUP_ROOT_TEMPORARY_ID,
        new ListingGroupFilterDimension([
            // All sibling nodes must have the same dimension type. We use an empty
            // ProductCondition to indicate that this is an "Other" partition.
            'product_condition' => new ProductCondition()
        ])
    );

    $mutateOperations[] = self::createMutateOperationForUnit(
        $customerId,
        $assetGroupId,
        $tempId--,
        $conditionOtherSubdivisionId,
        new ListingGroupFilterDimension(
            ['product_brand' => new ProductBrand(['value' => 'CoolBrand'])]
        )
    );

    $mutateOperations[] = self::createMutateOperationForUnit(
        $customerId,
        $assetGroupId,
        $tempId--,
        $conditionOtherSubdivisionId,
        new ListingGroupFilterDimension([
            'product_brand' => new ProductBrand(['value' => 'CheapBrand'])
        ])
    );

    $mutateOperations[] = self::createMutateOperationForUnit(
        $customerId,
        $assetGroupId,
        $tempId--,
        $conditionOtherSubdivisionId,
        // All other product brands.
        new ListingGroupFilterDimension(['product_brand' => new ProductBrand()])
    );

    // Issues a mutate request to create everything and prints its information.
    $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();
    $response = $googleAdsServiceClient->mutate(
        MutateGoogleAdsRequest::build($customerId, $mutateOperations)
    );

    self::printResponseDetails($mutateOperations, $response);
}
AddPerformanceMaxProductListingGroupTree.php
      

Python

def main(client, customer_id, asset_group_id, replace_existing_tree):
    """The main method that creates all necessary entities for the example.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        asset_group_id: the asset group id for the Performance Max campaign.
        replace_existing_tree: option to remove existing product tree from the
            passed in asset group.
    """
    googleads_service = client.get_service("GoogleAdsService")
    asset_group_resource_name = googleads_service.asset_group_path(
        customer_id, asset_group_id
    )
    operations = []

    if replace_existing_tree:
        # Retrieve a list of existing AssetGroupListingGroupFilters
        existing_listing_group_filters = (
            get_all_existing_listing_group_filter_assets_in_asset_group(
                client, customer_id, asset_group_resource_name
            )
        )

        # If present, create MutateOperations to remove each
        # AssetGroupListingGroupFilter and add them to the list of operations.
        if existing_listing_group_filters:
            remove_operation_factory = (
                AssetGroupListingGroupFilterRemoveOperationFactory(
                    client, existing_listing_group_filters
                )
            )
            operations.extend(remove_operation_factory.remove_all())

    create_operation_factory = (
        AssetGroupListingGroupFilterCreateOperationFactory(
            client,
            customer_id,
            asset_group_id,
            _TEMPORARY_ID_LISTING_GROUP_ROOT,
        )
    )

    operations.append(create_operation_factory.create_root())

    new_dimension = client.get_type("ListingGroupFilterDimension")
    new_dimension.product_condition.condition = (
        client.enums.ListingGroupFilterProductConditionEnum.NEW
    )
    operations.append(
        create_operation_factory.create_unit(
            _TEMPORARY_ID_LISTING_GROUP_ROOT,
            create_operation_factory.next_id(),
            new_dimension,
        )
    )

    used_dimension = client.get_type("ListingGroupFilterDimension")
    used_dimension.product_condition.condition = (
        client.enums.ListingGroupFilterProductConditionEnum.USED
    )
    operations.append(
        create_operation_factory.create_unit(
            _TEMPORARY_ID_LISTING_GROUP_ROOT,
            create_operation_factory.next_id(),
            used_dimension,
        )
    )

    # We save this ID because create child nodes underneath it.
    subdivision_id_condition_other = create_operation_factory.next_id()

    # All sibling nodes must have the same dimension type. We use an empty
    # product_condition to indicate that this is an "Other" partition.
    other_dimension = client.get_type("ListingGroupFilterDimension")
    # This triggers the presence of the product_condition field without
    # specifying any field values. This is important in order to tell the API
    # that this is an "other" node.
    other_dimension.product_condition._pb.SetInParent()
    # We're calling create_subdivision because this listing group will have
    # children.
    operations.append(
        create_operation_factory.create_subdivision(
            _TEMPORARY_ID_LISTING_GROUP_ROOT,
            subdivision_id_condition_other,
            other_dimension,
        )
    )

    cool_dimension = client.get_type("ListingGroupFilterDimension")
    cool_dimension.product_brand.value = "CoolBrand"
    operations.append(
        create_operation_factory.create_unit(
            subdivision_id_condition_other,
            create_operation_factory.next_id(),
            cool_dimension,
        )
    )

    cheap_dimension = client.get_type("ListingGroupFilterDimension")
    cheap_dimension.product_brand.value = "CheapBrand"
    operations.append(
        create_operation_factory.create_unit(
            subdivision_id_condition_other,
            create_operation_factory.next_id(),
            cheap_dimension,
        )
    )

    empty_dimension = client.get_type("ListingGroupFilterDimension")
    # This triggers the presence of the product_brand field without specifying
    # any field values. This is important in order to tell the API
    # that this is an "other" node.
    empty_dimension.product_brand._pb.SetInParent()
    operations.append(
        create_operation_factory.create_unit(
            subdivision_id_condition_other,
            create_operation_factory.next_id(),
            empty_dimension,
        )
    )

    response = googleads_service.mutate(
        customer_id=customer_id, mutate_operations=operations
    )

    print_response_details(operations, response)
add_performance_max_product_listing_group_tree.py
      

Ruby

def add_performance_max_product_listing_group_tree(
    customer_id,
    asset_group_id,
    replace_existing_tree)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new

  asset_group_resource_name = client.path.asset_group(
    customer_id,
    asset_group_id,
  )

  # We use a factory to create all the MutateOperations that manipulate a
  # specific AssetGroup for a specific customer. The operations returned by the
  # factory's methods are used to optionally remove all
  # AssetGroupListingGroupFilters from the tree, and then to construct a new
  # tree of filters. These filters can have a parent-child relationship, and
  # also include a special root that includes all children.
  #
  # When creating these filters, we use temporary IDs to create the hierarchy
  # between the root listing group filter, and the subdivisions and leave nodes
  # beneath that.
  #
  # The factory specific to a customerId and assetGroupId is created below.
  create_operation_factory = AssetGroupListingGroupFilterCreateOperationFactory.new(
    customer_id,
    asset_group_id,
    TEMPORARY_ID_LISTING_GROUP_ROOT,
  )

  operations = []

  if replace_existing_tree
    existing_listing_group_filters = get_existing_listing_group_filters_in_asset_group(
      client,
      customer_id,
      asset_group_resource_name,
    )

    if existing_listing_group_filters.length > 0
      # A special factory object that ensures the creation of remove operations
      # in the correct order (child listing group filters must be removed
      # before their parents).
      remove_operation_factory = AssetGroupListingGroupFilterRemoveOperationFactory.new(
        existing_listing_group_filters
      )

      operations += remove_operation_factory.remove_all(client)
    end
  end

  operations << create_operation_factory.create_root(client)

  operations << create_operation_factory.create_unit(
    client,
    TEMPORARY_ID_LISTING_GROUP_ROOT,
    create_operation_factory.next_id,
    client.resource.listing_group_filter_dimension do |dimension|
      dimension.product_condition = client.resource.product_condition do |condition|
        condition.condition = :NEW
      end
    end,
  )
  operations << create_operation_factory.create_unit(
    client,
    TEMPORARY_ID_LISTING_GROUP_ROOT,
    create_operation_factory.next_id,
    client.resource.listing_group_filter_dimension do |dimension|
      dimension.product_condition = client.resource.product_condition do |condition|
        condition.condition = :USED
      end
    end,
  )

  # We save this ID because we create child nodes underneath it.
  subdivision_id_condition_other = create_operation_factory.next_id

  operations << create_operation_factory.create_subdivision(
    client,
    TEMPORARY_ID_LISTING_GROUP_ROOT,
    subdivision_id_condition_other,
    client.resource.listing_group_filter_dimension do |dimension|
      dimension.product_condition = client.resource.product_condition do |condition|
        # All sibling nodes must have the same dimension type. We use an empty
        # ProductCondition to indicate that this is an "Other" partition.
      end
    end,
  )

  operations << create_operation_factory.create_unit(
    client,
    subdivision_id_condition_other,
    create_operation_factory.next_id,
    client.resource.listing_group_filter_dimension do |dimension|
      dimension.product_brand = client.resource.product_brand do |brand|
        brand.value = 'CoolBrand'
      end
    end,
  )
  operations << create_operation_factory.create_unit(
    client,
    subdivision_id_condition_other,
    create_operation_factory.next_id,
    client.resource.listing_group_filter_dimension do |dimension|
      dimension.product_brand = client.resource.product_brand do |brand|
        brand.value = 'CheapBrand'
      end
    end,
  )
  operations << create_operation_factory.create_unit(
    client,
    subdivision_id_condition_other,
    create_operation_factory.next_id,
    client.resource.listing_group_filter_dimension do |dimension|
      dimension.product_brand = client.resource.product_brand do |brand|
      end
    end,
  )

  response = client.service.google_ads.mutate(
    customer_id: customer_id,
    mutate_operations: operations,
  )

  print_response_details(operations, response)
end
add_performance_max_product_listing_group_tree.rb
      

Perl

sub add_performance_max_product_listing_group_tree {
  my ($api_client, $customer_id, $asset_group_id, $replace_existing_tree) = @_;

  # We create all the mutate operations that manipulate a specific asset group for
  # a specific customer. The operations are used to optionally remove all asset
  # group listing group filters from the tree, and then to construct a new tree
  # of filters. These filters can have a parent-child relationship, and also include
  # a special root that includes all children.
  #
  # When creating these filters, we use temporary IDs to create the hierarchy between
  # the root listing group filter, and the subdivisions and leave nodes beneath that.
  my $mutate_operations = [];
  if (defined $replace_existing_tree) {
    my $existing_listing_group_filters =
      get_all_existing_listing_group_filter_assets_in_asset_group(
      $api_client,
      $customer_id,
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset_group(
        $customer_id, $asset_group_id
      ));

    if (scalar @$existing_listing_group_filters > 0) {
      push @$mutate_operations,
        # Ensure the creation of remove operations in the correct order (child
        # listing group filters must be removed before their parents).
        @{
        create_mutate_operations_for_removing_listing_group_filters_tree(
          $existing_listing_group_filters)};
    }
  }

  push @$mutate_operations,
    create_mutate_operation_for_root($customer_id, $asset_group_id,
    LISTING_GROUP_ROOT_TEMPORARY_ID);

  # The temporary ID to be used for creating subdivisions and units.
  my $temp_id = LISTING_GROUP_ROOT_TEMPORARY_ID - 1;

  push @$mutate_operations,
    create_mutate_operation_for_unit(
    $customer_id,
    $asset_group_id,
    $temp_id--,
    LISTING_GROUP_ROOT_TEMPORARY_ID,
    Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
        productCondition =>
          Google::Ads::GoogleAds::V17::Resources::ProductCondition->new({
            condition => NEW
          })}));

  push @$mutate_operations,
    create_mutate_operation_for_unit(
    $customer_id,
    $asset_group_id,
    $temp_id--,
    LISTING_GROUP_ROOT_TEMPORARY_ID,
    Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
        productCondition =>
          Google::Ads::GoogleAds::V17::Resources::ProductCondition->new({
            condition => USED
          })}));

  # We save this ID to create child nodes underneath it.
  my $condition_other_subdivision_id = $temp_id--;

  # We're calling create_mutate_operation_for_subdivision() because this listing
  # group will have children.
  push @$mutate_operations, create_mutate_operation_for_subdivision(
    $customer_id,
    $asset_group_id,
    $condition_other_subdivision_id,
    LISTING_GROUP_ROOT_TEMPORARY_ID,
    Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
        # All sibling nodes must have the same dimension type. We use an empty
        # ProductCondition to indicate that this is an "Other" partition.
        productCondition =>
          Google::Ads::GoogleAds::V17::Resources::ProductCondition->new({})}));

  push @$mutate_operations,
    create_mutate_operation_for_unit(
    $customer_id,
    $asset_group_id,
    $temp_id--,
    $condition_other_subdivision_id,
    Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
        productBrand =>
          Google::Ads::GoogleAds::V17::Resources::ProductBrand->new({
            value => "CoolBrand"
          })}));

  push @$mutate_operations,
    create_mutate_operation_for_unit(
    $customer_id,
    $asset_group_id,
    $temp_id--,
    $condition_other_subdivision_id,
    Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
        productBrand =>
          Google::Ads::GoogleAds::V17::Resources::ProductBrand->new({
            value => "CheapBrand"
          })}));

  push @$mutate_operations, create_mutate_operation_for_unit(
    $customer_id,
    $asset_group_id,
    $temp_id--,
    $condition_other_subdivision_id,
    # All other product brands.
    Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
        productBrand =>
          Google::Ads::GoogleAds::V17::Resources::ProductBrand->new({})}));

  # Issue a mutate request to create everything and print its information.
  my $response = $api_client->GoogleAdsService()->mutate({
    customerId       => $customer_id,
    mutateOperations => $mutate_operations
  });

  print_response_details($mutate_operations, $response);

  return 1;
}
add_performance_max_product_listing_group_tree.pl
      

Dostępne wymiary informacji o wymiarach informacji o produkcie

Wskazówka: dowiedz się, jak filtrować wymiary i partycje produktów, korzystając z interaktywnego przewodnika po kampaniach Performance Max.

W kampaniach Performance Max może występować wiele wymiarów strony aplikacji grupy informacji o produktach. Tych typów typu ListingDimensionInfo można używać z: Kampanie sprzedażowe Performance Max:

• ProductBrandInfo
• ProductCategoryInfo
• ProductChannelInfo
• ProductConditionInfo
• ProductCustomAttributeInfo
• ProductItemIdInfo
• ProductTypeInfo

Każdy zasób zawiera listę obsługiwanych lokalizacji w ProductCategoryConstant.ProductCategoryLocalization . Aby zrozumieć dane zwracane przez zasób, wypróbuj Przykład pobierania stałych kategorii produktów.

Inne węzły jednostek można utworzyć, przekazując pusty obiekt ListingDimensionInfo typów do ListingGroupInfo.

Ważne: atrybut niestandardowy w Google Ads jest odpowiednikiem atrybutu Etykieta własna w Google Merchant na środku.

Identyfikatory tymczasowe

Kryteriów grupy plików nie przypisuje się identyfikatorów, dopóki żądanie mutacji nie utworzy są przetwarzane przez serwer. Wartość ListingGroupInfo jest jednak nieprawidłowa do jest gotowy, więc przy tworzeniu podgrupy musisz również utworzyć co najmniej 1 z jego węzłów podrzędnych oraz węzła Other w tym samym żądaniu.

Aby ustawić parent_criterion_id dla ListingGroupInfo dla utworzonych węzłów podrzędnych w ramach tego samego żądania elementu nadrzędnego możesz użyć kryterium tymczasowego Identyfikatory. Te identyfikatory mają zastosowanie tylko w kontekście pojedynczego żądania mutacji. Dowolna ujemna liczba całkowita może być używany jako identyfikator tymczasowy.