دوربین را تنظیم کنید
با مجموعهها، منظم بمانید
ذخیره و طبقهبندی محتوا براساس اولویتهای شما.
دوربین به شما اجازه می دهد تا دیدگاه کاربر را نسبت به نقشه تغییر دهید. می توانید از حالت های دوربین برای کنترل رفتار نقشه در حین پیمایش استفاده کنید. برای تنظیم حالت دوربین، ویژگی cameraMode
نمای نقشه را تنظیم کنید و یکی از ثابت های حالت دوربین زیر را مشخص کنید:
زیر — حالت پیش فرض دوربین برای پیمایش. زاویه دید را به 45 درجه تغییر می دهد و دوربین را در پشت موقعیت فعلی رو به جهت حرکت قرار می دهد. در حین ناوبری، دوربین به طور خودکار روی صورت در جهت حرکت تنظیم می شود. با فشار دادن دکمه مرکز مجدد نقشه نیز به این حالت تغییر می کند. با انتخاب این حالت، دکمه مرکز مجدد قابل مشاهده نیست.
نمای کلی - یک نمای کلی از کل مسیر را نمایش می دهد، در صورت نیاز زوم می کند تا مسیر را در نمای نقشه جا دهد. وقتی این نما انتخاب شد دکمه مرکز مجدد قابل مشاهده است.
رایگان - به کاربر امکان می دهد نمای نقشه را با حرکات حرکتی تغییر دهد. دوربین در این نما ثابت می ماند. اگر کاربر در حین پیمایش حرکت کند یا بزرگنمایی کند، نقشه به طور خودکار وارد این نمای می شود. وقتی این نما انتخاب شد دکمه مرکز مجدد قابل مشاهده است.
برای تغییر حالت دوربین، ویژگی cameraMode
را در نمای نقشه تنظیم کنید، همانطور که در اینجا نشان داده شده است:
سویفت
// Set the mode to "overview":
mapView.cameraMode = .overview
// Set the mode to "free":
mapView.cameraMode = .free
// Set the mode to "following":
mapView.cameraMode = .following
هدف-C
// Set the mode to "overview":
mapView.cameraMode = GMSNavigationCameraModeOverview;
// Set the mode to "free":
mapView.cameraMode = GMSNavigationCameraModeFree;
// Set the mode to "following":
mapView.cameraMode = GMSNavigationCameraModeFollowing;
به طور خودکار نقشه را جدیدتر کنید
وقتی کاربران نقشه را در حالت ناوبری جابجا می کنند، حالت دوربین برای نمای نقشه از حالت زیر به حالت آزاد تغییر می کند. هنگامی که کاربر صریحاً مرکز مجدد را فشار میدهد، دوربین به حالت زیر برمیگردد. میتوانید بازگشت به حالت زیر را با استفاده از یک تایمر برای تنظیم فاصله زمانی بین خروج از حالت زیر و سپس بازگشت خودکار به آن، خودکار کنید.
مثال
مثال کد زیر تعیین می کند که آیا نقشه توسط کاربر در حالت ناوبری جابجا می شود یا خیر. اگر اینطور باشد، یک تایمر تنظیم میکند تا حالت دوربین را به حالت بعدی تغییر دهد و نقشه را بعد از پنج ثانیه در مرکز قرار دهد.
سویفت
class YourViewController: UIViewController {
@IBOutlet weak var mapView: GMSMapView!
var autoFollowTimer: Timer!
override func viewDidLoad() {
super.viewDidLoad()
mapView.delegate = self
...
}
...
}
/** Implements the GMSMapViewDelegate protocol. */
extension YourViewController: GMSMapViewDelegate {
func mapView(_ mapView: GMSMapView, willMove gesture: Bool) {
if mapView.navigator?.isGuidanceActive == false {return}
if !gesture {return}
autoFollowTimer?.invalidate()
autoFollowTimer = Timer(
timeInterval: TimeInterval(5.0),
target: self,
selector: #selector(recenterMap),
userInfo: nil,
repeats: false)
RunLoop.current.add(autoFollowTimer, forMode: .default)
}
/** Centers the map in guidance mode. */
@objc private func recenterMap() {
if mapView.navigator?.isGuidanceActive == true {
mapView.cameraMode = .following
}
autoFollowTimer.invalidate()
autoFollowTimer = nil
}
}
هدف-C
@interface YourViewController : UIViewController<GMSMapViewDelegate>
...
@end
@implementation YourViewController {
GMSMapView *_mapView;
NSTimer *_autoFollowTimer;
...
}
...
- (void)viewDidLoad {
[super viewDidLoad];
...
_mapView.delegate = self;
...
}
...
/** Implements the GMSMapViewDelegate protocol. */
- (void)mapView:(GMSMapView *)mapView willMove:(BOOL)gesture {
if (!_mapView.navigator.guidanceActive) return;
if (!gesture) return;
[_autoFollowTimer invalidate];
_autoFollowTimer = [NSTimer scheduledTimerWithTimeInterval:5.0
target:self
selector:@selector(recenterMap)
userInfo:nil
repeats:NO];
}
/** Centers the map in guidance mode. */
- (void)recenterMap {
if (_mapView.navigator.guidanceActive) {
_mapView.cameraMode = GMSNavigationCameraModeFollowing;
}
[_autoFollowTimer invalidate];
_autoFollowTimer = nil;
}
@end
جز در مواردی که غیر از این ذکر شده باشد،محتوای این صفحه تحت مجوز Creative Commons Attribution 4.0 License است. نمونه کدها نیز دارای مجوز Apache 2.0 License است. برای اطلاع از جزئیات، به خطمشیهای سایت Google Developers مراجعه کنید. جاوا علامت تجاری ثبتشده Oracle و/یا شرکتهای وابسته به آن است.
تاریخ آخرین بهروزرسانی 2025-08-29 بهوقت ساعت هماهنگ جهانی.
[null,null,["تاریخ آخرین بهروزرسانی 2025-08-29 بهوقت ساعت هماهنگ جهانی."],[[["\u003cp\u003eYou can change the user's viewpoint of the map by setting the \u003ccode\u003ecameraMode\u003c/code\u003e property to \u003ccode\u003efollowing\u003c/code\u003e, \u003ccode\u003eoverview\u003c/code\u003e, or \u003ccode\u003efree\u003c/code\u003e.\u003c/p\u003e\n"],["\u003cp\u003e\u003ccode\u003eFollowing\u003c/code\u003e mode puts the camera behind the current position, \u003ccode\u003eoverview\u003c/code\u003e mode displays the entire route, and \u003ccode\u003efree\u003c/code\u003e mode allows user interaction.\u003c/p\u003e\n"],["\u003cp\u003eThe map automatically enters \u003ccode\u003efree\u003c/code\u003e mode when the user pans or zooms, and a \u003cstrong\u003eRe-center\u003c/strong\u003e button is available in \u003ccode\u003eoverview\u003c/code\u003e and \u003ccode\u003efree\u003c/code\u003e modes to return to \u003ccode\u003efollowing\u003c/code\u003e mode.\u003c/p\u003e\n"],["\u003cp\u003eYou can automate the return to \u003ccode\u003efollowing\u003c/code\u003e mode after a set time interval using a timer to improve user experience.\u003c/p\u003e\n"]]],[],null,["# Adjust the camera\n\nThe [camera](/maps/documentation/ios-sdk/views) allows you to change the user's\nviewpoint of the map. You can use camera modes to control the behavior of the\nmap during navigation. To set the camera mode, set the `cameraMode` property of\nthe map view, specifying one of the following camera mode constants:\n\n- Following --- The default camera mode for navigation. Changes the view\n angle to 45 degrees and puts the camera behind the current position facing in\n the direction of travel. During navigation the camera automatically adjusts\n to face in the direction of travel. Pressing the map's **Re-center** button\n will also switch to this mode. The **Re-center** button is not visible when\n this mode is selected.\n\n- Overview --- Displays an overview of the entire route, zooming as needed\n to fit the route into the map view. When this view is selected the\n **Re-center** button is visible.\n\n- Free --- Lets the user change the map view with [gestures](/maps/documentation/navigation/ios-sdk/controls).\n The camera remains stationary in this view. The map will automatically enter\n this view if the user pans or zooms during navigation. When this view is\n selected the **Re-center** button is visible.\n\nTo change the camera mode, set the `cameraMode` property of the map view, as\nshown here:\n\n\u003cbr /\u003e\n\n### Swift\n\n\u003cbr /\u003e\n\n // Set the mode to \"overview\":\n mapView.cameraMode = .overview\n\n // Set the mode to \"free\":\n mapView.cameraMode = .free\n\n // Set the mode to \"following\":\n mapView.cameraMode = .following\n\n\u003cbr /\u003e\n\n### Objective-C\n\n\u003cbr /\u003e\n\n // Set the mode to \"overview\":\n mapView.cameraMode = GMSNavigationCameraModeOverview;\n\n // Set the mode to \"free\":\n mapView.cameraMode = GMSNavigationCameraModeFree;\n\n // Set the mode to \"following\":\n mapView.cameraMode = GMSNavigationCameraModeFollowing;\n\n\u003cbr /\u003e\n\n\u003cbr /\u003e\n\nAutomatically recenter the map\n------------------------------\n\nWhen users move the map in Navigation mode, the camera mode for the map\nview changes from following mode to free mode. The camera returns to following\nmode when the user explicitly presses **Re-center**. You can automate the\nreturn to following mode by using a timer to set an interval between leaving\nfollowing mode, and then automatically returning to it.\n\n### Example\n\nThe following code example checks to determine whether the map is being moved by\nthe user while in Navigation mode. If it is, then it sets a timer to switch the\ncamera mode to following mode, centering the map after five seconds.\n\n\u003cbr /\u003e\n\n### Swift\n\n\u003cbr /\u003e\n\n class YourViewController: UIViewController {\n\n @IBOutlet weak var mapView: GMSMapView!\n var autoFollowTimer: Timer!\n\n override func viewDidLoad() {\n super.viewDidLoad()\n mapView.delegate = self\n ...\n }\n\n ...\n }\n\n /** Implements the GMSMapViewDelegate protocol. */\n extension YourViewController: GMSMapViewDelegate {\n func mapView(_ mapView: GMSMapView, willMove gesture: Bool) {\n if mapView.navigator?.isGuidanceActive == false {return}\n if !gesture {return}\n\n autoFollowTimer?.invalidate()\n autoFollowTimer = Timer(\n timeInterval: TimeInterval(5.0),\n target: self,\n selector: #selector(recenterMap),\n userInfo: nil,\n repeats: false)\n RunLoop.current.add(autoFollowTimer, forMode: .default)\n }\n\n /** Centers the map in guidance mode. */\n @objc private func recenterMap() {\n if mapView.navigator?.isGuidanceActive == true {\n mapView.cameraMode = .following\n }\n\n autoFollowTimer.invalidate()\n autoFollowTimer = nil\n }\n }\n\n\u003cbr /\u003e\n\n### Objective-C\n\n\u003cbr /\u003e\n\n @interface YourViewController : UIViewController\u003cGMSMapViewDelegate\u003e\n ...\n @end\n\n\n @implementation YourViewController {\n GMSMapView *_mapView;\n NSTimer *_autoFollowTimer;\n ...\n }\n\n ...\n\n - (void)viewDidLoad {\n [super viewDidLoad];\n ...\n _mapView.delegate = self;\n ...\n }\n\n ...\n\n /** Implements the GMSMapViewDelegate protocol. */\n - (void)mapView:(GMSMapView *)mapView willMove:(BOOL)gesture {\n if (!_mapView.navigator.guidanceActive) return;\n if (!gesture) return;\n\n [_autoFollowTimer invalidate];\n _autoFollowTimer = [NSTimer scheduledTimerWithTimeInterval:5.0\n target:self\n selector:@selector(recenterMap)\n userInfo:nil\n repeats:NO];\n }\n\n /** Centers the map in guidance mode. */\n - (void)recenterMap {\n if (_mapView.navigator.guidanceActive) {\n _mapView.cameraMode = GMSNavigationCameraModeFollowing;\n }\n\n [_autoFollowTimer invalidate];\n _autoFollowTimer = nil;\n }\n\n @end\n\n\u003cbr /\u003e\n\n\u003cbr /\u003e"]]