الخطوات الأولى

هناك ثلاث واجهات برمجة تطبيقات يمكنك استخدامها للتفاعل آليًا مع المشترين المعتمَدين:

في ما يلي بعض الأمثلة على المهام التي يمكنك إكمالها باستخدام واجهات برمجة تطبيقات "المشترون المعتمَدون":

  • الوصول إلى معلومات حساب عرض الأسعار في الوقت الفعلي
  • إرسال المواد الإبداعية التي تخضع للمراجعة وإدارتها
  • استرداد مقاييس تحديد المشاكل وحلّها في عروض الأسعار في الوقت الفعلي
  • إدارة قوائم المستخدِمين الخاصة بالشراة المعتمَدين
  • إدارة إعدادات الاستهداف المُسبَق
  • إعداد وصول العميل في Marketplace.
  • يمكنك الاطّلاع على عروض المحتوى المقترَحة وإدارتها في Marketplace.

إذا لم تكن تعرف "الشراة المعتمَدون"، يمكنك الانتقال إلى مركز مساعدة الشراة المعتمَدون وواجهة المستخدم للحصول على المزيد من المعلومات.

إعداد المصادقة

تستخدم Google APIs بروتوكول OAuth 2.0 للمصادقة والتفويض. في ما يلي كيفية إعداد المصادقة لواجهة برمجة التطبيقات Real-time Bidding API باستخدام OAuth 2.0.

يستخدم هذا المثال حساب خدمة. يُرجى الاطّلاع على مستندات إدارة الوصول إلى الهوية في Google Cloud للحصول على مزيد من التفاصيل حول التحكّم في الوصول.

  1. انتقِل إلى صفحة "واجهات برمجة التطبيقات المفعّلة" في "وحدة تحكّم واجهة Google API".

  2. من القائمة المنسدلة للمشروع، اختَر مشروعًا أو أنشِئ مشروعًا جديدًا.

  3. في قائمة واجهات برمجة التطبيقات المفعّلة، تأكَّد من إدراج Real-time Bidding API. إذا لم تكن مُدرَجة، انقر على علامة التبويب Google APIs، وابحث عن واجهة برمجة التطبيقات Real-time Bidding API واختَرها، ثم انقر على تفعيل واجهة برمجة التطبيقات.

  4. بعد ذلك، اختَر بيانات الاعتماد في الشريط الجانبي على يمين الصفحة.

  5. اختَر القائمة المنسدلة إنشاء بيانات اعتماد، ثم اختَر مفتاح حساب الخدمة.

  6. في القائمة المنسدلة حساب الخدمة، اختَر حساب خدمة جديد.

  7. أدخِل اسمًا لحساب الخدمة. يتم إنشاء رقم تعريف حساب الخدمة تلقائيًا من الاسم واسم المشروع.

  8. دوِّن معرّف حساب الخدمة، إذ ستحتاج إليه لمنح إذن الوصول إلى حساب الخدمة الجديد في واجهة مستخدم "المشترون المعتمَدون" في الخطوة 11.

  9. اختَر ملف JSON المقترَح كـ نوع المفتاح.

  10. انقر على إنشاء. يتم حفظ ملف JSON الذي يتضمّن مفتاحَي الحساب العام/الخاص في مجلد "التنزيلات". احتفظ بملف JSON الذي تم إنشاؤه في مكان آمن.

  11. يجب منح حساب الخدمة إذن الوصول في واجهة مستخدم "المشترون المعتمَدون" لكي يعمل. حدد الإعدادات > إعدادات الحساب، ثم اختر إدارة المستخدمين > مستخدمو الحساب، وانقر على + حساب الخدمة. أدخِل رقم تعريف حساب الخدمة الذي سجّلته أعلاه في الخطوة 8. يؤدي ذلك إلى إنشاء مستخدم جديد لديه دور حساب الخدمة.

احرِص على منح مستخدمين متعددين إذن الوصول الإداري إلى مشروعك على السحابة الإلكترونية، في حال احتجت إلى تغيير الأذونات.

طلب الوصول إلى واجهة برمجة التطبيقات

عند اتّباع مسار التفويض في OAuth 2.0، يمكن لتطبيقك تحديد النطاقات لطلب الوصول إلى ميزات معيّنة بالنيابة عن حسابات Google الأخرى. استخدِم النطاقات التالية للحصول على إذن قراءة/كتابة في أيّ من واجهات برمجة التطبيقات في "المشترون المعتمَدون" بالنيابة عن حساب "المشترون المعتمَدون":

  • Marketplace API: https://www.googleapis.com/auth/authorized-buyers-marketplace
  • واجهة برمجة تطبيقات "عرض الأسعار في الوقت الفعلي": https://www.googleapis.com/auth/realtime-Bid
  • Ad Exchange Buyer API II: https://www.googleapis.com/auth/adexchange.buyer

تقديم طلب بيانات من واجهة برمجة التطبيقات

في ما يلي بعض العيّنات التي يمكنك استخدامها للبدء باللغات المتاحة:

Marketplace API

Java

/*
 * Copyright 2021 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.google.api.services.samples.authorizedbuyers.marketplace.v1;

import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpRequestInitializer;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.JsonFactory;
import com.google.api.client.json.gson.GsonFactory;
import com.google.api.services.authorizedbuyersmarketplace.v1.AuthorizedBuyersMarketplace;
import com.google.api.services.authorizedbuyersmarketplace.v1.AuthorizedBuyersMarketplaceScopes;
import com.google.api.services.authorizedbuyersmarketplace.v1.model.Client;
import com.google.auth.http.HttpCredentialsAdapter;
import com.google.auth.oauth2.GoogleCredentials;
import com.google.auth.oauth2.ServiceAccountCredentials;
import java.io.FileInputStream;
import java.io.IOException;
import java.util.HashSet;
import java.util.List;
import java.util.Set;

/**
 * A sample application that authenticates and runs a request against the Authorized Buyers
 * Marketplace API.
 */
public class FirstApiRequest {

  /**
   * Be sure to specify the name of your application. If the application name is {@code null} or
   * blank, the application will log a warning. Suggested format is "MyCompany-ProductName/1.0".
   */
  private static final String APPLICATION_NAME = "APPLICATION_NAME_HERE";

  // Full path to JSON Key file - include file name.
  private static final java.io.File JSON_FILE = new java.io.File("INSERT_PATH_TO_JSON_FILE");

  // Name of the buyer resource for which the API call is being made.
  private static final String BUYER_NAME = "INSERT_BUYER_RESOURCE_NAME";

  // Global instance of the HTTP transport.
  private static HttpTransport httpTransport;

  // Global instance of the JSON factory.
  private static final JsonFactory jsonFactory = GsonFactory.getDefaultInstance();

  public static void main(String[] args) throws Exception {
    // Create credentials using the JSON key file.
    GoogleCredentials credentials = null;

    try (FileInputStream serviceAccountStream = new FileInputStream((JSON_FILE))) {
      Set<String> scopes = new HashSet<>(AuthorizedBuyersMarketplaceScopes.all());
      credentials = ServiceAccountCredentials.fromStream(serviceAccountStream).createScoped(scopes);
    } catch (IOException ex) {
      System.out.println("Can't complete authorization step. Did you specify a JSON key file?");
      System.out.println(ex);
      System.exit(1);
    }

    HttpRequestInitializer requestInitializer = new HttpCredentialsAdapter(credentials);
    httpTransport = GoogleNetHttpTransport.newTrustedTransport();

    // Use the credentials to create a client for the API service.
    AuthorizedBuyersMarketplace marketplaceClient =
        new AuthorizedBuyersMarketplace.Builder(httpTransport, jsonFactory, requestInitializer)
            .setApplicationName(APPLICATION_NAME)
            .build();

    // Call the buyers.clients.list method to get a list of clients for the given buyer.
    List<Client> clients =
        marketplaceClient.buyers().clients().list(BUYER_NAME).execute().getClients();

    if (clients != null && clients.size() > 0) {
      System.out.printf("Listing of clients associated with buyer \"%s\"%n", BUYER_NAME);
      for (Client client : clients) {
        System.out.printf("* Client name: %s\n", client.getName());
      }
    } else {
      System.out.printf(
          "No clients were found that were associated with buyer \"%s\"%n.", BUYER_NAME);
    }
  }
}

Python

#!/usr/bin/python
#
# Copyright 2022 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""Sample application that authenticates and makes an API request."""

import pprint
from googleapiclient.discovery import build
from google.oauth2 import service_account

# A Service Account key file can be generated via the Google Developers
# Console.
KEY_FILE = 'PATH_TO_JSON_KEY_FILE'  # Path to Service Account JSON key file.

# Authorized Buyers Marketplace API authorization scope.
SCOPE = 'https://www.googleapis.com/auth/authorized-buyers-marketplace'
VERSION = 'v1'  # Version of Authorized Buyers Marketplace API to use.

# Name of the buyer resource for which the API call is being made.
BUYER_NAME = 'BUYER_RESOURCE_NAME'


def main():
  # Create credentials using the Service Account JSON key file.
  credentials = service_account.Credentials.from_service_account_file(
      KEY_FILE, scopes=[SCOPE])

  # Build a client for the authorizedbuyersmarketplace API service.
  marketplace = build('authorizedbuyersmarketplace', VERSION, credentials=credentials)

  # Call the buyers.clients.list method to get a list of clients for the
  # given buyer.
  request = marketplace.buyers().clients().list(parent=BUYER_NAME)

  pprint.pprint(request.execute())


if __name__ == '__main__':
  main()

NET.

/* Copyright 2021 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

using Google.Apis.AuthorizedBuyersMarketplace.v1;
using Google.Apis.AuthorizedBuyersMarketplace.v1.Data;
using Google.Apis.Auth.OAuth2;
using Google.Apis.Json;
using Google.Apis.Services;

using System;
using System.Collections.Generic;

namespace Google.Apis.AuthorizedBuyersMarketplace.Examples.v1
{
    /// <summary>
    /// Self contained sample to return a list of clients for a given buyer account.
    /// Primarily used by the Getting Started guide:
    /// https://developers.google.com/authorized-buyers/apis/getting_started
    ///
    /// Note: To run this sample, you will need to configure it as the StartupObject in
    /// Google.Apis.AuthorizedBuyersMarketplace.Examples.csproj.
    /// </summary>
    internal class FirstApiRequest
    {
        private static void Main(string[] args)
        {
            // See the README.md for details of these fields.
            // Retrieved from https://console.developers.google.com
            var ServiceKeyFilePath = "PATH TO JSON KEY FILE HERE";

            // Name of the buyer resource for which the API call is being made.
            var buyerName = "INSERT_BUYER_RESOURCE_NAME_HERE";

            // Retrieve credential parameters from the key JSON file.
            var credentialParameters = NewtonsoftJsonSerializer.Instance
                .Deserialize<JsonCredentialParameters>(
                    System.IO.File.ReadAllText(ServiceKeyFilePath));

            // Create the credentials.
            var credentialInitializer = new ServiceAccountCredential.Initializer(
                    credentialParameters.ClientEmail)
                {
                    Scopes = new[]
                    {
                        AuthorizedBuyersMarketplaceService.Scope.AuthorizedBuyersMarketplace
                    }
                }.FromPrivateKey(credentialParameters.PrivateKey);

            var oAuth2Credentials = new ServiceAccountCredential(credentialInitializer);

            // Use the credentials to create a client for the API service.
            var serviceInitializer = new BaseClientService.Initializer
                {
                    HttpClientInitializer = oAuth2Credentials,
                    ApplicationName = "FirstAPICall"
                };

            var mkService = new AuthorizedBuyersMarketplaceService(serviceInitializer);

            // Call the buyers.clients.list method to list clients for the given buyer.
            BuyersResource.ClientsResource.ListRequest request =
                mkService.Buyers.Clients.List(buyerName);

            IList<Client> clients = request.Execute().Clients;

            foreach (Client client in clients)
            {
                Console.WriteLine("* Client name: {0}", client.Name);
            }

            Console.ReadLine();
        }
    }
}

PHP

<?php

/**
 * Copyright 2022 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * Sample application that authenticates and makes an API request.
 */

namespace Google\Ads\AuthorizedBuyers\Marketplace\Examples\V1;

/**
 * Provide path to client library. See README.md for details.
 */
require_once __DIR__ . '/../../vendor/autoload.php';

use Google_Client;
use Google_Service_AuthorizedBuyersMarketplace;


session_start();

/**
 * You can retrieve this file from the Google Developers Console.
 *
 * See README.md for details.
 */
$keyFileLocation = "INSERT_PATH_TO_JSON_KEYFILE";

/**
 * Name of the buyer resource for which the API call is being made.
 */
$buyerName = "INSERT_BUYER_RESOURCE_NAME";

if ($keyFileLocation === 'INSERT_PATH_TO_JSON_KEYFILE') {
    print "WARNING: Authorization details not provided!\n";
    exit(1);
}

$client = new Google_Client();
$client->setApplicationName('Authorized Buyers Marketplace API PHP Samples');

$service = new Google_Service_AuthorizedBuyersMarketplace($client);

$client->setAuthConfig($keyFileLocation);
$client->addScope('https://www.googleapis.com/auth/authorized-buyers-marketplace');

if ($client->isAccessTokenExpired()) {
    $client->refreshTokenWithAssertion();
}

if ($client->getAccessToken()) {
    // Call the buyers.clients.list method to get a list of clients for the given buyer.
    $result = $service->buyers_clients->listBuyersClients($buyerName);

    print "Clients associated with buyer account\n";
    if (empty($result['clients'])) {
        print "No clients found\n";
        return;
    } else {
        foreach ($result['clients'] as $client) {
            print_r($client);
        }
    }
}

Ruby

#!/usr/bin/env ruby
# Encoding: utf-8
#
# Copyright:: Copyright 2022 Google LLC
#
# License:: Licensed under the Apache License, Version 2.0 (the "License");
#           you may not use this file except in compliance with the License.
#           You may obtain a copy of the License at
#
#           http://www.apache.org/licenses/LICENSE-2.0
#
#           Unless required by applicable law or agreed to in writing, software
#           distributed under the License is distributed on an "AS IS" BASIS,
#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
#           implied.
#           See the License for the specific language governing permissions and
#           limitations under the License.
#
# Sample application that authenticates and makes an API request.

require 'google/apis/authorizedbuyersmarketplace_v1'
require 'googleauth/service_account'

# You can download the JSON keyfile used for authentication from the Google
# Developers Console.
KEY_FILE = 'path_to_key'  # Path to JSON file containing your private key.

# Name of the buyer resource for which the API call is being made.
BUYER_NAME = 'insert_buyer_resource_name'


def first_api_request()
  # Create credentials using the JSON key file.
  auth_options = {
    :json_key_io => File.open(KEY_FILE, "r"),
    :scope => 'https://www.googleapis.com/auth/authorized-buyers-marketplace'
  }

  oauth_credentials = Google::Auth::ServiceAccountCredentials.make_creds(
    options=auth_options
  )

  # Create the service and set credentials
  marketplace = (
    Google::Apis::AuthorizedbuyersmarketplaceV1::AuthorizedBuyersMarketplaceService.new
  )
  marketplace.authorization = oauth_credentials
  marketplace.authorization.fetch_access_token!

  begin
    # Call the buyers.clients.list method to get list of clients for given buyer.
    clients_list = marketplace.list_buyer_clients(BUYER_NAME)

    if clients_list.clients.any?
      puts "Found the following clients for buyer '%s':" % BUYER_NAME
      clients_list.clients.each do |client|
        puts "* Client name: #{client.name}"
      end
    else
      puts "No clients were found that were associated with buyer '%s'" % BUYER_NAME
    end
  rescue Google::Apis::ServerError => e
    raise "The following server error occured:\n%s" % e.message
  rescue Google::Apis::ClientError => e
    raise "Invalid client request:\n%s" % e.message
  rescue Google::Apis::AuthorizationError => e
    raise "Authorization error occured:\n%s" % e.message
  end
end

if __FILE__ == $0
  begin
    first_api_request()
  end
end

Real-time Bidding API

Java

في ما يلي مثال أساسي يوضّح كيفية استخدام واجهة برمجة التطبيقات Real-time Bidding API مع Java.

  1. إنشاء مشروع Maven

    افتح pom.xml وأضِف هذه الاعتمادات: 

    <dependencies>
  <dependency>
    <groupId>com.google.api-client</groupId>
    <artifactId>google-api-client</artifactId>
    <version>1.32.2</version>
  </dependency>
  <dependency>
    <groupId>com.google.apis</groupId>
    <artifactId>google-api-services-pubsub</artifactId>
    <version>v1-rev452-1.25.0</version>
  </dependency>
  <dependency>
    <groupId>com.google.apis</groupId>
    <artifactId>google-api-services-realtimebidding</artifactId>
    <version>v1-rev20220503-1.32.1</version>
  </dependency>
  <dependency>
    <groupId>com.google.auth</groupId>
    <artifactId>google-auth-library-oauth2-http</artifactId>
    <version>1.3.0</version>
  </dependency>
  <dependency>
    <groupId>com.google.code.gson</groupId>
    <artifactId>gson</artifactId>
    <version>2.8.9</version>
  </dependency>
  <dependency>
    <groupId>com.google.http-client</groupId>
    <artifactId>google-http-client-jackson2</artifactId>
    <version>1.40.1</version>
  </dependency>
  <dependency>
    <groupId>joda-time</groupId>
    <artifactId>joda-time</artifactId>
    <version>2.10.13</version>
  </dependency>
  <dependency>
    <groupId>net.sourceforge.argparse4j</groupId>
    <artifactId>argparse4j</artifactId>
    <version>0.9.0</version>
  </dependency>
</dependencies>

  2. إعداد بيانات الاعتماد

    تتطلّب جميع طلبات البيانات من واجهة برمجة التطبيقات المصادقة. يمكنك إنشاء Credential باستخدام ملف مفتاح JSON لحساب الخدمة الذي تمت مناقشته أعلاه. 

    GoogleCredentials credentials = null;

try (FileInputStream serviceAccountStream = new FileInputStream((JSON_FILE))) {
  Set<String> scopes = new HashSet<>(RealTimeBiddingScopes.all());
  credentials = ServiceAccountCredentials.fromStream(serviceAccountStream).createScoped(scopes);
} catch (IOException ex) {
  System.out.println("Can't complete authorization step. Did you specify a JSON key file?");
  System.out.println(ex);
  System.exit(1);
}
  3. إنشاء عنصر تحكم لواجهة برمجة التطبيقات Real-time Bidding API

    يمكنك بعد ذلك إنشاء عميل واجهة برمجة التطبيقات لخدمة عروض الأسعار في الوقت الفعلي باستخدام نموذج "أداة الإنشاء": 

    
HttpRequestInitializer requestInitializer = new HttpCredentialsAdapter(credentials);
httpTransport = GoogleNetHttpTransport.newTrustedTransport();

// Use the credentials to create a client for the API service.
RealTimeBidding realtimeBidding =
    new RealTimeBidding.Builder(httpTransport, jsonFactory, requestInitializer)
        .setApplicationName(APPLICATION_NAME)
        .build();

  4. تنفيذ عملية

    بعد إنشاء مثيل لعميل للاتصال بواجهة برمجة التطبيقات، يمكنك تنفيذ عملية. يعرض الرمز التالي جميع تصاميم الإعلانات الخاصة بأحد المشترين المعيّنين. 

        List<Creative> creatives =
        realtimeBidding
            .buyers()
            .creatives()
            .list(BUYER_NAME)
            .setView("FULL")
            .execute()
            .getCreatives();

    if (creatives != null && creatives.size() > 0) {
      System.out.printf("Listing of creatives associated with buyer '%s'%n", BUYER_NAME);
      for (Creative creative : creatives) {
        System.out.printf("* Creative name: %s\n", creative.getName());
      }
    } else {
      System.out.printf(
          "No creatives were found that were associated with buyer '%s'%n.", BUYER_NAME);
    }
    FirstApiRequest.java

للحصول على معلومات أكثر تفصيلاً حول استخدام Real-time Bidding API مع Java، يُرجى الرجوع إلى ملف README في أمثلة Real-time Bidding API.

Python

في ما يلي مثال أساسي يوضّح كيفية استخدام واجهة برمجة التطبيقات Real-time Bidding API مع Python.

  1. تنزيل مكتبة عميل واجهة برمجة التطبيقات Python وتثبيتها

    مثال لاستخدام pip: 

    $ pip install --upgrade google-api-python-client

  2. إعداد بيانات الاعتماد

    تتطلّب جميع طلبات البيانات من واجهة برمجة التطبيقات المصادقة، لذا عليك إنشاء مثيل service_account.Credentials باستخدام ملف مفتاح حساب الخدمة بتنسيق JSON الذي تمت مناقشته أعلاه. 

      credentials = service_account.Credentials.from_service_account_file(
      KEY_FILE, scopes=[SCOPE])
  3. إنشاء عميل لواجهة برمجة التطبيقات Real-time Bidding API

    يمكنك بعد ذلك إنشاء عميل واجهة برمجة التطبيقات لخدمة عروض الأسعار في الوقت الفعلي باستخدام مثيل service_account.Credentials المفوَّض: 

    realtimebidding = build('realtimebidding', VERSION, credentials=credentials)

  4. تنفيذ عملية

    بعد إنشاء مثيل لعميل للاتصال بواجهة برمجة التطبيقات، يمكنك تنفيذ عملية. يعرض الرمز التالي جميع تصاميم الإعلانات الخاصة بأحد المشترين المعيّنين. 

    request = realtimebidding.buyers().creatives().list(parent=BUYER_NAME)

pprint.pprint(request.execute())
    first_api_request.py

للحصول على معلومات أكثر تفصيلاً حول استخدام Ad Exchange Buyer API مع Python، يُرجى الرجوع إلى ملف README في أمثلة واجهة برمجة التطبيقات لتقديم عروض أسعار في الوقت الفعلي.

PHP

في ما يلي مثال أساسي يوضّح كيفية استخدام واجهة برمجة تطبيقات عروض الأسعار في الوقت الفعلي مع لغة PHP.

  1. إعداد التبعيات

    إذا لم يسبق لك تثبيت Composer، نزِّله وثبِّته، ثم أنشئ ملف composer.json يتضمّن محتوًى مثل ما يلي: 

    {
  "description": "Authorized Buyers Real-Time Bidding API PHP Samples",
  "require": {
    "php": ">=7.2",
    "google/apiclient": "^2.0"
  },
  "require-dev": {
    "squizlabs/php_codesniffer": "3.*"
  },
  "type": "project",
  "homepage": "https://github.com/googleads/authorized-buyers-rtb-api-samples/tree/master/php",
  "license": "Apache-2.0",
  "authors": [
    {
      "name": "Google",
      "homepage": "https://github.com/googleads/authorized-buyers-rtb-api-samples/graphs/contributors"
    }
  ]
}

    أخيرًا، شغِّل ما يلي لتثبيت مكتبات الاعتماد:

    composer install
  2. إعداد عميل

    أنشئ Google_Client واستخدِمه لإنشاء مثيل Google_Service_RealTimeBidding. 

    
$client = new Google_Client();
$client->setApplicationName('Authorized Buyers Real-time Bidding API PHP Samples');

$service = new Google_Service_RealTimeBidding($client);
  3. إعداد بيانات الاعتماد

    تتطلّب جميع طلبات البيانات من واجهة برمجة التطبيقات رمز دخول صالحًا. اضبط العميل على اتّباع مسار OAuth 2.0. 

    
$client->setAuthConfig($keyFileLocation);
$client->addScope('https://www.googleapis.com/auth/realtime-bidding');

if ($client->isAccessTokenExpired()) {
    $client->refreshTokenWithAssertion();
}
  4. تنفيذ عملية

    بعد إنشاء مثيل لعميل للاتصال بواجهة برمجة التطبيقات وضبط OAuth 2.0، يمكنك استخدامه لإجراء طلب إلى واجهة برمجة التطبيقات. يعرض الرمز التالي جميع تصميمات الإعلانات الخاصة بحساب مشتري معيّن: 

    $result = $service->buyers_creatives->listBuyersCreatives($buyerName, $queryParams);

print "Creatives associated with buyer account\n";
if (empty($result['creatives'])) {
    print "No creatives found\n";
    return;
} else {
    foreach ($result['creatives'] as $creative) {
        print_r($creative);
    }
}
    FirstApiRequest.php

للحصول على معلومات أكثر تفصيلاً عن استخدام واجهة برمجة التطبيقات Ad Exchange Partner API مع لغة PHP، يمكنك الاطّلاع على ملف README في أمثلة واجهة برمجة التطبيقات لعروض الأسعار في الوقت الفعلي.

NET.

في ما يلي مثال أساسي يوضّح كيفية استخدام واجهة برمجة تطبيقات عروض الأسعار في الوقت الفعلي مع C#.

  1. إنشاء مشروع جديد

    افتح Visual Studio Code وأنشئ مشروعًا جديدًا.

  2. إضافة مراجع المكتبة المطلوبة إلى مشروعك

    في ملف *.csproj الخاص بمشروعك، أضِف إدخالًا PackageReference لـ Google.Apis، Google.Apis.Auth، Google.Apis.Core، Google.Apis.Oauth2.v2، Google.Apis.RealTimeBidding.v1. على سبيل المثال، قد يبدو ذلك على النحو التالي:

    <ItemGroup>
  <PackageReference Include="Google.Apis" Version="1.57.0" />
  <PackageReference Include="Google.Apis.Auth" Version="1.57.0" />
  <PackageReference Include="Google.Apis.Core" Version="1.57.0" />
  <PackageReference Include="Google.Apis.Oauth2.v2" Version="1.57.0.1869" />
  <PackageReference Include="Google.Apis.Pubsub.v1" Version="1.57.0.2667" />
  <PackageReference Condition="!Exists('./Google.Apis.RealTimeBidding.v1.csproj')" Include="Google.Apis.RealTimeBidding.v1" Version="1.57.0.2680" />
  <PackageReference Include="log4net" Version="2.0.13" />
  <PackageReference Include="Microsoft.Extensions.Configuration" Version="3.1.4" />
  <PackageReference Include="Microsoft.NETFramework.ReferenceAssemblies" Version="1.0.0">
    <PrivateAssets>all</PrivateAssets>
    <IncludeAssets>runtime; build; native; contentfiles; analyzers</IncludeAssets>
  </PackageReference>
  <PackageReference Include="Mono.Options" Version="6.12.0.148" />
  <PackageReference Include="Newtonsoft.Json" Version="13.0.1" />
</ItemGroup>

    يمكنك العثور على مزيد من المعلومات عن هذه التبعيات على الرابط: https://www.nuget.org/packages/.

  3. إعداد بيانات الاعتماد

    تتطلّب جميع طلبات البيانات من واجهة برمجة التطبيقات المصادقة. يمكنك إنشاء Credential باستخدام عنوان البريد الإلكتروني لحساب الخدمة وملف JSON المذكورَين أعلاه. 

    var credentialParameters = NewtonsoftJsonSerializer.Instance
    .Deserialize<JsonCredentialParameters>(
        System.IO.File.ReadAllText(ServiceKeyFilePath));

// Create the credentials.
var credentialInitializer = new ServiceAccountCredential.Initializer(
        credentialParameters.ClientEmail)
    {
        Scopes = new[] { RealTimeBiddingService.Scope.RealtimeBidding }
    }.FromPrivateKey(credentialParameters.PrivateKey);

var oAuth2Credentials = new ServiceAccountCredential(credentialInitializer);
  4. إنشاء واجهة برمجة تطبيقات لخدمة Real-time Bidding API

    يمكنك بعد ذلك إنشاء RealTimeBiddingService: 

    var serviceInitializer = new BaseClientService.Initializer
    {
        HttpClientInitializer = oAuth2Credentials,
        ApplicationName = "FirstAPICall"
    };

var realtimebidding = new RealTimeBiddingService(serviceInitializer);
  5. تنفيذ عملية

    بعد إنشاء مثيل لعميل للاتصال بواجهة برمجة التطبيقات، يمكنك تنفيذ عملية. يسرد الرمز التالي تصميمات الإعلانات لحساب مشتري محدّد في "المشترون المعتمَدون" مرتبط ببيانات اعتمادك. 

    BuyersResource.CreativesResource.ListRequest request =
    realtimebidding.Buyers.Creatives.List(buyerName);
request.View = BuyersResource.CreativesResource.ListRequest.ViewEnum.FULL;

IList<Creative> creatives = request.Execute().Creatives;

foreach (Creative creative in creatives)
{
    Console.WriteLine("* Creative name: {0}", creative.Name);
}
    FirstApiRequest.cs

للحصول على معلومات أكثر تفصيلاً حول استخدام Real-time Bidding API مع C#، يُرجى الرجوع إلىملف README في أمثلة Real-time Bidding API.

Ruby

في ما يلي مثال أساسي يوضّح كيفية استخدام واجهة برمجة تطبيقات "عرض الأسعار في الوقت الفعلي" مع Ruby.

  1. تنزيل برنامج Google API Ruby Client وتثبيته

    إذا لم يسبق لك تثبيت Bundler، نزِّله وثبِّته، ثم أنشئ Gemfile يتضمّن محتوًى مثل ما يلي: 

    source "https://rubygems.org"

ruby "2.6.0"

gem 'google-apis-pubsub_v1', '0.10.0'
gem 'google-apis-realtimebidding_v1', '~> 0.14.0'

    أخيرًا، شغِّل ما يلي لتثبيت مكتبات الاعتماد:

    bundle
  2. إعداد بيانات الاعتماد

    تتطلّب جميع طلبات البيانات من واجهة برمجة التطبيقات المصادقة، لذا عليك إنشاء بيانات الاعتماد باستخدام عنوان البريد الإلكتروني لحساب الخدمة وملف JSON المذكورَين أعلاه.

    # Create credentials using the JSON key file.
  auth_options = {
    :json_key_io => File.open(KEY_FILE, "r"),
    :scope => 'https://www.googleapis.com/auth/realtime-bidding'
  }

  oauth_credentials = Google::Auth::ServiceAccountCredentials.make_creds(
    options=auth_options
  )
  3. إنشاء عميل لخدمة AdExchangeBuyer

    ويمكنك بعد ذلك إنشاء برنامج مشتري AdExchange المعتمد باستخدام بيانات الاعتماد:

    # Create the service and set credentials
  realtimebidding = (
    Google::Apis::RealtimebiddingV1::RealtimeBiddingService.new
  )
  realtimebidding.authorization = oauth_credentials
  realtimebidding.authorization.fetch_access_token!
  4. تنفيذ عملية

    بعد إنشاء مثيل لعميل للاتصال بواجهة برمجة التطبيقات، يمكنك تنفيذ عملية. يعرض الرمز التالي جميع تصاميم الإعلانات الخاصة بأحد المشترين المعيّنين. 

    # Call the buyers.creatives.list method to get list of creatives for given buyer.
    creatives_list = realtimebidding.list_buyer_creatives(
        BUYER_NAME, view: 'FULL')

    if creatives_list.creatives.any?
      puts "Found the following creatives for buyer '%s':" % BUYER_NAME
      creatives_list.creatives.each do |creative|
        puts "* Creative name: #{creative.name}"
      end
    else
      puts "No creatives were found that were associated with buyer '%s'" % BUYER_NAME
    end
    first_api_request.rb

للحصول على معلومات أكثر تفصيلاً حول استخدام Real-time Bidding API مع Ruby، يُرجى الرجوع إلى ملف README في أمثلة Real-time Bidding API.

Ad Exchange Buyer API II

Java

/*
 * Copyright (c) 2017 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 * in compliance with the License. You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software distributed under the License
 * is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
 * or implied. See the License for the specific language governing permissions and limitations under
 * the License.
 */

package com.google.api.services.samples.adexchangebuyer.cmdline.v2_x;

import com.google.api.client.googleapis.services.json.AbstractGoogleJsonClient;
import com.google.api.services.adexchangebuyer2.v2beta1.AdExchangeBuyerII;
import com.google.api.services.adexchangebuyer2.v2beta1.model.AbsoluteDateRange;
import com.google.api.services.adexchangebuyer2.v2beta1.model.Client;
import com.google.api.services.adexchangebuyer2.v2beta1.model.Date;
import com.google.api.services.adexchangebuyer2.v2beta1.model.FilterSet;
import com.google.api.services.adexchangebuyer2.v2beta1.model.RealtimeTimeRange;
import com.google.api.services.adexchangebuyer2.v2beta1.model.RelativeDateRange;
import com.google.api.services.samples.adexchangebuyer.cmdline.BaseSample;
import java.io.IOException;
import java.util.List;

/**
 * This sample illustrates how to retrieve all Bidder-level Filter Sets.
 */
public class GetAllBidderLevelFilterSets extends BaseSample {
  @Override
  public ClientType getClientType() {
    return ClientType.ADEXCHANGEBUYERII;
  }

  @Override
  public String getName() {
    return "Get All Bidder-level Filter Sets.";
  }

  @Override
  public String getDescription() {
    return "Lists Filter Sets associated with the given Bidder.";
  }

  @Override
  public void execute(AbstractGoogleJsonClient client) throws IOException {
    AdExchangeBuyerII adXClient = (AdExchangeBuyerII) client;
    String bidderResourceId = getStringInput("bidderResourceId", "Enter the Bidder's resource ID");
    String ownerName = String.format("bidders/%s", bidderResourceId);
    List<FilterSet> allFilterSets = adXClient.bidders().filterSets().list(ownerName).execute()
        .getFilterSets();

    if (allFilterSets != null && allFilterSets.size() > 0) {
      System.out.println("========================================");
      System.out.printf("Listing of Filter Sets associated with Bidder \"%s\"%n", ownerName);
      System.out.println("========================================");
      for (FilterSet filterSet : allFilterSets) {
        System.out.printf("* Filter Set name: %s%n", filterSet.getName());
        AbsoluteDateRange absDateRange = filterSet.getAbsoluteDateRange();
        if(absDateRange != null) {
          System.out.println("AbsoluteDateRange");
          System.out.printf("\tStart date: %s%n",
              convertDateToString(absDateRange.getStartDate()));
          System.out.printf("\tEnd date: %s%n",
              convertDateToString(absDateRange.getEndDate()));
        }
        RelativeDateRange relDateRange = filterSet.getRelativeDateRange();
        if(relDateRange != null) {
          Integer offset = relDateRange.getOffsetDays();
          System.out.println("RelativeDateRange");
          System.out.printf("\tOffset days: %s%n", offset != null ? offset : 0);
          System.out.printf("\tDuration days: %s%n", relDateRange.getDurationDays());
        }
        RealtimeTimeRange rtTimeRange = filterSet.getRealtimeTimeRange();
        if(rtTimeRange != null) {
          System.out.println("RealtimeTimeRange");
          System.out.printf("\tStart timestamp: %s%n", rtTimeRange.getStartTimestamp());
        }
        String timeSeriesGranularity = filterSet.getTimeSeriesGranularity();
        if(timeSeriesGranularity != null) {
          System.out.printf("Time series granularity: %s%n", timeSeriesGranularity);
        }
        String format = filterSet.getFormat();
        if(format != null) {
          System.out.printf("\tFormat: %s%n", format);
        }
        String environment = filterSet.getEnvironment();
        if(environment != null) {
          System.out.printf("Environment: %s%n", environment);
        }
        List<String> platforms = filterSet.getPlatforms();
        if(platforms != null) {
          System.out.println("Platforms:");
          for(String platform : platforms) {
            System.out.printf("\t%s%n", platform);
          }
        }
        List<Integer> sellerNetworkIds = filterSet.getSellerNetworkIds();
        if(filterSet.getSellerNetworkIds() != null) {
          System.out.println("Seller network IDS:");
          for(Integer sellerNetworkId : sellerNetworkIds) {
            System.out.printf("\t%d%n", sellerNetworkId);
          }
        }
      }
    } else {
      System.out.printf("No Filter Sets were found associated with Bidder \"%s\"%n", ownerName);
    }
  }

  private String convertDateToString(Date date) {
    return String.format("%d%02d%02d", date.getYear(), date.getMonth(), date.getDay());
  }
}

Python

#!/usr/bin/python
#
# Copyright 2017 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""This example lists bidder-level filter sets."""


import argparse
import os
import pprint
import sys

sys.path.insert(0, os.path.abspath('..'))

from googleapiclient.errors import HttpError
import samples_util


_OWNER_NAME_TEMPLATE = 'bidders/{bidders_resource_id}'

DEFAULT_BIDDER_RESOURCE_ID = 'ENTER_BIDDER_RESOURCE_ID_HERE'


def main(ad_exchange_buyer, owner_name):
  try:
    # Construct and execute the request.
    filter_sets = ad_exchange_buyer.bidders().filterSets().list(
        ownerName=owner_name).execute()
    print(f'Listing FilterSets for bidder: "{owner_name}".')
    pprint.pprint(filter_sets)
  except HttpError as e:
    print(e)


if __name__ == '__main__':
  parser = argparse.ArgumentParser(
      description='Creates a bidder-level filter set with the specified options'
  )
  # Required fields.
  parser.add_argument(
      '-b', '--bidder_resource_id', default=DEFAULT_BIDDER_RESOURCE_ID,
      help=('The resource ID of the bidders resource for which the filter '
            'sets were created. This will be used to construct the ownerName '
            'used as a path parameter for filter set requests. For additional '
            'information on how to configure the ownerName path parameter, '
            'see: https://developers.google.com/authorized-buyers/apis/'
            'reference/rest/v2beta1/bidders.filterSets/list'
            '#body.PATH_PARAMETERS.owner_name'))

  args = parser.parse_args()

  try:
    service = samples_util.GetService('v2beta1')
  except IOError as ex:
    print(f'Unable to create adexchangebuyer service - {ex}')
    print('Did you specify the key file in samples_util.py?')
    sys.exit(1)

  main(service, _OWNER_NAME_TEMPLATE.format(
           bidders_resource_id=args.bidder_resource_id))

PHP

<?php
/**
 * Copyright 2017 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

require_once __DIR__ . '/../../BaseExample.php';

/**
 * This example illustrates how to retrieve all Bidder-level Filter Sets.
 */
class ListBidderLevelFilterSets extends BaseExample {

  /**
   * @see BaseExample::getInputParameters()
   */
  protected function getInputParameters() {
    return [
        [
            'name' => 'bidderResourceId',
            'display' => 'Bidder Resource ID',
            'required' => true
        ]
    ];
  }

  /**
   * @see BaseExample::run()
   */
  public function run() {
    $values = $this->formValues;
    $ownerName = sprintf(
        'bidders/%s',
        $values['bidderResourceId']
    );
    $result = $this->service->bidders_filterSets
        ->listBiddersFilterSets($ownerName);
    print sprintf(
        '<h2>Listing Bidder-level Filter Sets for ownerName "%s"</h2>',
         $ownerName
    );
    if (empty($result['filterSets'])) {
      print '<p>No Bidder-level Filter Sets found.</p>';
    } else {
      foreach ($result['filterSets'] as $filterSets) {
        $this->printResult($filterSets);
      }
    }
  }

  /**
   * @see BaseExample::getClientType()
   */
  public function getClientType() {
    return ClientType::AdExchangeBuyerII;
  }

  /**
   * @see BaseExample::getName()
   */
  public function getName() {
    return 'RTB Troubleshooting: List Bidder-level Filter Sets';
  }
}

NET.

/* Copyright 2017, Google Inc. All Rights Reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

using Google.Apis.AdExchangeBuyerII.v2beta1;
using Google.Apis.AdExchangeBuyerII.v2beta1.Data;
using Google.Apis.Services;

using System;
using System.Collections.Generic;

namespace Google.Apis.AdExchangeBuyer.Examples.v2_x
{
    /// <summary>
    /// Retrieves the bidder-level filter sets for the given bidder resource ID.
    /// </summary>
    public class ListBidderLevelFilterSets : ExampleBase
    {
        /// <summary>
        /// Main method, to run this code example as a standalone application.
        /// </summary>
        /// <param name="args">The command line arguments</param>
        public static void Main(string[] args)
        {
            AdExchangeBuyerIIService service = Utilities.GetV2Service();
            ExampleBase example = new ListBidderLevelFilterSets();
            Console.WriteLine(example.Description);

            example.Run(service);
        }

        /// <summary>
        /// Returns a description about the code example.
        /// </summary>
        public override string Description
        {
            get { return "This code example lists all bidder-level filter sets for the given " +
                    "bidder resource ID."; }
        }

        /// <summary>
        /// Runs the code example.
        /// </summary>
        /// <param name="service">An authenticated AdExchangeBuyerIIService</param>
        public override void Run(BaseClientService service)
        {
            AdExchangeBuyerIIService adXService = (AdExchangeBuyerIIService)service;
            string bidderResourceId = "INSERT_BIDDER_RESOURCE_ID_HERE";
            string ownerName = String.Format("bidders/{0}", bidderResourceId);

            ListFilterSetsResponse response = adXService.Bidders.FilterSets.List(ownerName)
                .Execute();

            Console.WriteLine("========================================\n");
            Console.WriteLine("Listing of filter sets associated with owner name \"{0}\"",
                ownerName);
            Console.WriteLine("========================================\n");

            if (response.FilterSets.Count == 0)
            {
                Console.WriteLine("No filter sets found.");
            } else
            {
                foreach (FilterSet filterSet in response.FilterSets)
                {
                    Console.WriteLine("* Name: {0}", filterSet.Name);
                    AbsoluteDateRange absDateRange = filterSet.AbsoluteDateRange;
                    if (absDateRange != null)
                    {
                        Console.WriteLine("\tAbsoluteDateRange:");
                        Date startDate = absDateRange.StartDate;
                        Console.WriteLine("\t\tStartDate:");
                        Console.WriteLine("\t\t\tYear: {0}", startDate.Year);
                        Console.WriteLine("\t\t\tMonth: {0}", startDate.Month);
                        Console.WriteLine("\t\t\tDay: {0}", startDate.Day);
                        Date endDate = absDateRange.EndDate;
                        Console.WriteLine("\t\tEndDate:");
                        Console.WriteLine("\t\t\tYear: {0}", endDate.Year);
                        Console.WriteLine("\t\t\tMonth: {0}", endDate.Month);
                        Console.WriteLine("\t\t\tDay: {0}", endDate.Day);
                    }
                    RelativeDateRange relDateRange = filterSet.RelativeDateRange;
                    if (relDateRange != null)
                    {
                        Console.WriteLine("\tRelativeDateRange:");
                        Console.WriteLine("\t\tOffsetDays: {0}", relDateRange.OffsetDays);
                        Console.WriteLine("\t\tDurationDays: {0}", relDateRange.DurationDays);
                    }
                    RealtimeTimeRange rtTimeRange = filterSet.RealtimeTimeRange;
                    if (rtTimeRange != null)
                    {
                        Console.WriteLine("\tRealtimeTimeRange:");
                        Console.WriteLine("\t\tStartTimestamp: {0}", rtTimeRange.StartTimestamp);
                    }
                    String timeSeriesGranularity = filterSet.TimeSeriesGranularity;
                    if (timeSeriesGranularity != null)
                    {
                        Console.WriteLine("\tTimeSeriesGranularity: {0}", timeSeriesGranularity);
                    }
                    IList<String> formats = filterSet.Formats;
                    if (formats != null)
                    {
                        Console.WriteLine("\tFormats:");
                        foreach (string format in formats)
                        {
                            Console.WriteLine("\t\t{0}", format);
                        }
                    }
                    String environment = filterSet.Environment;
                    if (environment != null)
                    {
                        Console.WriteLine("\tEnvironment: {0}", environment);
                    }
                    IList<string> platforms = filterSet.Platforms;
                    if (platforms != null)
                    {
                        Console.WriteLine("\tPlatforms:");
                        foreach (string platform in platforms)
                        {
                            Console.WriteLine("\t\t{0}", platform);
                        }
                    }
                    IList<int?> sellerNetworkIds = filterSet.SellerNetworkIds;
                    if (sellerNetworkIds != null)
                    {
                        Console.WriteLine("\tSellerNetworkIds:");
                        foreach (int? sellerNetworkId in sellerNetworkIds)
                        {
                            Console.WriteLine("\t\t{0}", sellerNetworkId);
                        }
                    }
                }
            }
        }

        public override ClientType getClientType()
        {
            return ClientType.ADEXCHANGEBUYERII;
        }
    }
}

Ruby

#!/usr/bin/env ruby
# Encoding: utf-8
#
# Copyright:: Copyright 2017, Google Inc. All Rights Reserved.
#
# License:: Licensed under the Apache License, Version 2.0 (the "License");
#           you may not use this file except in compliance with the License.
#           You may obtain a copy of the License at
#
#           http://www.apache.org/licenses/LICENSE-2.0
#
#           Unless required by applicable law or agreed to in writing, software
#           distributed under the License is distributed on an "AS IS" BASIS,
#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
#           implied.
#           See the License for the specific language governing permissions and
#           limitations under the License.
#
# Lists the filter sets for a given bidder.
#
# Tags: Bidders.FilterSets.list

require 'optparse'

require_relative '../samples_util'


def list_bidder_level_filter_sets(ad_exchange_buyer, owner_name, page_size)
  begin
    response = ad_exchange_buyer.list_bidder_filter_sets(
        owner_name, page_size: page_size
    )

    unless response.filter_sets.nil?
      puts 'Found the following filter sets for bidder %s:' % owner_name
      response.filter_sets.each do |filter_set|
        puts '* Filter set name: %s' % filter_set.name
        if !filter_set.absolute_date_range.nil?
          abs_date_range = filter_set.absolute_date_range
          start_date = abs_date_range.start_date
          end_date = abs_date_range.end_date
          puts "\tAbsolute date range:"
          puts "\t\tStart date: %s-%s-%s" % [start_date.year, start_date.month,
              start_date.day]
          puts "\t\tEnd date: %s-%s-%s" % [end_date.year, end_date.month,
              end_date.day]
        end
        unless filter_set.realtime_time_range.nil?
          realtime_time_range = filter_set.realtime_time_range
          puts "\tRealtime time range:"
          puts "\t\tStart timestamp: %s" % realtime_time_range.start_timestamp
        end
        unless filter_set.relative_date_range.nil?
          relative_date_range = filter_set.relative_date_range
          puts "\tRelative date range:"
          puts "\t\tOffset days: %s" % relative_date_range.offset_days
          puts "\t\tDuration days: %s" % relative_date_range.duration_days
        end
        unless filter_set.time_series_granularity.nil?
          puts "\tTime series granularity: %s" %
              filter_set.time_series_granularity
        end
        unless filter_set.format.nil?
          puts "\tFormat: %s" % filter_set.format
        end
        unless filter_set.environment.nil?
          puts "\tEnvironment: %s" % filter_set.environment
        end
        unless filter_set.platforms.nil?
          puts "\tPlatforms: %s" % filter_set.platforms.inspect
        end
        unless filter_set.seller_network_ids.nil?
          puts "\tSeller network IDs: %s" %
              filter_set.seller_network_ids.inspect
        end
      end
    else
      puts 'No filter sets found for bidder %s.' % owner_name
    end
  rescue Google::Apis::ServerError => e
    raise "The following server error occured:\n%s" % e.message
  rescue Google::Apis::ClientError => e
    raise "Invalid client request:\n%s" % e.message
  rescue Google::Apis::AuthorizationError => e
    raise "Authorization error occured:\n%s" % e.message
  end
end


if __FILE__ == $0
  begin
    # Retrieve the service used to make API requests.
    service = get_service(ADEXCHANGEBUYER_V2BETA1)
  rescue ArgumentError => e
    raise 'Unable to create service, with error message: %s' % e.message
  rescue Signet::AuthorizationError => e
    raise ('Unable to create service, was the KEY_FILE in samples_util.rb ' +
           'set? Error message: %s') % e.message
  end

  # Set options and default values for fields used in this example.
  options = [
    Option.new(
      'bidder_resource_id',
      ('The resource ID of the bidders resource for which the filter ' +
       'sets were created. This will be used to construct the ownerName ' +
       'used as a path parameter for filter set requests. For additional ' +
       'information on how to configure the ownerName path parameter, ' +
       'see: https://developers.google.com/authorized-buyers/apis/reference/' +
       'rest/v2beta1/bidders.filterSets/list#body.PATH_PARAMETERS.owner_name'),
      :short_alias => 'b', :required => true,
      :default_value => nil  # Insert default value here.
    ),
    Option.new(
      'max_page_size',
      'The maximum number of entries returned on one result page.',
      :type => Integer, :short_alias => 'm', :required => true,
      :default_value => MAX_PAGE_SIZE
    )
  ]

  # Parse options.
  parser = Parser.new(options)
  opts = parser.parse(ARGV)

  owner_name = 'bidders/%s' % opts['bidder_resource_id']

  list_bidder_level_filter_sets(service, owner_name, opts['max_page_size'])
end

الخطوات التالية

المشاركة في الاستبيان

يُرجى مساعدتنا في تحسين هذا المحتوى من خلال ملء استطلاع سريع لإعلامنا بما نجح وما فاتك.