4.1.3 Creazione di un account Google Ads o selezione di un account esistente
Valore e impatto aziendale
Oltre al loro account Merchant Center, i tuoi commercianti devono avere anche un account Google Account Google Ads. Se hai scelto l'opzione di fatturazione diretta, ti consigliamo di e di usare un account esistente (che potrebbero già usare per pubblicare altri tipi di annunci).
Puoi creare account Google Ads in modo programmatico utilizzando l'API Google Ads. Puoi anche farlo manualmente per conto dei tuoi commercianti seguendo le i passaggi descritti in Creazione di un account Google Ads, il metodo scalabile in modo programmatico.
Indicazioni per l'esperienza utente
Fatturazione consolidata
Se scegli la fatturazione consolidata, puoi completare la configurazione della fatturazione solo sul backend, fatta eccezione per l'accettazione dei Termini di servizio.
Nello scenario di fatturazione diretta, i Termini di servizio di Google vengono mostrati al commerciante durante la configurazione della fatturazione in Google Ads o Merchant Center, non è necessario esporli agli utenti all'interno dell'interfaccia utente. Nella sezione dello scenario di fatturazione, devi visualizzare le norme degli annunci Shopping e le norme Google Ads per i tuoi utenti e registrarne l'accettazione (tra cui la data e la versione).
Fatturazione diretta
Le indicazioni relative all'esperienza utente trattate in questa sezione sono relative allo scenario di fatturazione diretta, in che scegli di mostrare al commerciante l'intera procedura di onboarding.
Se il commerciante non ha ancora completato il passaggio OAuth, chiedigli di farlo Ecco. Consigliamo di completare OAuth una volta all'inizio del flusso per ottenere l'ambito di Google Merchant Center e quello di Google Ads contemporaneamente. Rilevare eventuali account Google Ads esistenti del commerciante. Se uno o più sono rilevati, offri la possibilità di collegarti a uno di questi account.
Se il commerciante sceglie di creare un nuovo account, prova a precompilare il i campi paese, fuso orario e valuta con informazioni sulla a tua disposizione. Idealmente, il commerciante non dovrebbe dover fornire manualmente queste informazioni e la creazione di un nuovo account Google Ads un'esperienza che richiede un solo clic.
Dopo aver creato l'account, puoi collegare in modo programmatico l'account Google Ads all'account cliente Merchant Center del commerciante.
Di seguito è riportata una panoramica delle varianti dei passaggi di collegamento dell'account Google Ads. Se partecipi al programma di coupon di incentivi e il commerciante potrebbe essere se hai diritto al coupon, includi le informazioni del coupon nell'account Google Ads (dettagli nella sezione successiva).
Consulenza tecnica
Per gestire gli account Google Ads utilizzando l'API, devi già essere autenticato in qualità di utente di un account amministratore Google Ads esistente. Vengono creati nuovi account in quell'account amministratore.
I seguenti esempi mostrano come ottenere la gerarchia degli account del tuo l'account amministratore, creando un'istruzione GAQL per eseguire query su specificati nel campo client_customer di CustomerClient, e la sua esecuzione ricorsiva sugli account amministratore secondari. Devi fornire un'istanza login-customer-id e impostalo sul tuo ID account amministratore per eseguire uno a questi esempi, quando accedono ai subaccount tramite l'account amministratore.
Java
// Copyright 2020 Google LLC // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // https://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. package com.google.ads.googleads.examples.accountmanagement; import com.beust.jcommander.Parameter; import com.google.ads.googleads.examples.utils.ArgumentNames; import com.google.ads.googleads.examples.utils.CodeSampleParams; import com.google.ads.googleads.lib.GoogleAdsClient; import com.google.ads.googleads.v17.errors.GoogleAdsError; import com.google.ads.googleads.v17.errors.GoogleAdsException; import com.google.ads.googleads.v17.resources.CustomerClient; import com.google.ads.googleads.v17.resources.CustomerName; import com.google.ads.googleads.v17.services.CustomerServiceClient; import com.google.ads.googleads.v17.services.GoogleAdsRow; import com.google.ads.googleads.v17.services.GoogleAdsServiceClient; import com.google.ads.googleads.v17.services.GoogleAdsServiceClient.SearchPagedResponse; import com.google.ads.googleads.v17.services.ListAccessibleCustomersRequest; import com.google.ads.googleads.v17.services.ListAccessibleCustomersResponse; import com.google.ads.googleads.v17.services.SearchGoogleAdsRequest; import com.google.common.base.Strings; import com.google.common.collect.ArrayListMultimap; import com.google.common.collect.Multimap; import java.io.FileNotFoundException; import java.io.IOException; import java.util.ArrayList; import java.util.HashMap; import java.util.LinkedList; import java.util.List; import java.util.Map; import java.util.Queue; /** * Gets the account hierarchy of the specified manager account and login customer ID. If you don't * specify manager ID and login customer ID, the example will instead print the hierarchies of all * accessible customer accounts for your authenticated Google account. Note that if the list of * accessible customers for your authenticated Google account includes accounts within the same * hierarchy, this example will retrieve and print the overlapping portions of the hierarchy for * each accessible customer. */ public class GetAccountHierarchy { private static class GetAccountHierarchyParams extends CodeSampleParams { @Parameter(names = ArgumentNames.MANAGER_CUSTOMER_ID) private Long managerId; @Parameter(names = ArgumentNames.LOGIN_CUSTOMER_ID) private Long loginCustomerId; } public static void main(String[] args) { GetAccountHierarchyParams params = new GetAccountHierarchyParams(); if (!params.parseArguments(args)) { // Optional: You may pass the managerId on the command line or specify a managerId here. If // neither are set, a null value will be passed to the run example method, and the example // will print the hierarchies of all accessible customer IDs. // params.managerId = Long.parseLong("INSERT_MANAGER_ID_HERE"); // Optional: You may pass the loginCustomerId on the command line or specify a loginCustomerId // here if and only if the managerId is set. If the loginCustomerId is set neither on the // command line nor below, a null value will be passed to the run example method, and the // example will use each respective accessible customer ID as the loginCustomerId. // params.loginCustomerId = Long.parseLong("INSERT_LOGIN_CUSTOMER_ID_HERE"); } if (params.managerId != null && params.loginCustomerId == null) { System.err.println("loginCustomerId must be provided if managerId is provided."); return; } else if (params.managerId == null && params.loginCustomerId != null) { System.err.println("loginCustomerId may not be provided if managerId is not provided."); return; } GoogleAdsClient googleAdsClient = null; try { googleAdsClient = GoogleAdsClient.newBuilder().fromPropertiesFile().build(); } catch (FileNotFoundException fnfe) { System.err.printf( "Failed to load GoogleAdsClient configuration from file. Exception: %s%n", fnfe); System.exit(1); } catch (IOException ioe) { System.err.printf("Failed to create GoogleAdsClient. Exception: %s%n", ioe); System.exit(1); } try { new GetAccountHierarchy() .runExample(googleAdsClient, params.managerId, params.loginCustomerId); } catch (GoogleAdsException gae) { // GoogleAdsException is the base class for most exceptions thrown by an API request. // Instances of this exception have a message and a GoogleAdsFailure that contains a // collection of GoogleAdsErrors that indicate the underlying causes of the // GoogleAdsException. System.err.printf( "Request ID %s failed due to GoogleAdsException. Underlying errors:%n", gae.getRequestId()); int i = 0; for (GoogleAdsError googleAdsError : gae.getGoogleAdsFailure().getErrorsList()) { System.err.printf(" Error %d: %s%n", i++, googleAdsError); } System.exit(1); } catch (IOException ioe) { System.err.printf("Request failed. Exception: %s%n", ioe); System.exit(1); } } /** * Runs the example. * * @param googleAdsClient the Google Ads API client. * @param managerId the root customer ID from which to begin the search. * @param loginCustomerId the loginCustomerId used to create the GoogleAdsClient. * @throws IOException if a Google Ads Client is not successfully created. */ private void runExample(GoogleAdsClient googleAdsClient, Long managerId, Long loginCustomerId) throws IOException { List<Long> seedCustomerIds = new ArrayList<>(); if (managerId == null) { // Gets the account hierarchies for all accessible customers. seedCustomerIds = getAccessibleCustomers(googleAdsClient); } else { // Only gets the hierarchy for the provided manager ID if provided. seedCustomerIds.add(managerId); } Map<CustomerClient, Multimap<Long, CustomerClient>> allHierarchies = new HashMap<>(); List<Long> accountsWithNoInfo = new ArrayList<>(); // Constructs a map of account hierarchies. for (Long seedCustomerId : seedCustomerIds) { Map<CustomerClient, Multimap<Long, CustomerClient>> customerClientToHierarchy = createCustomerClientToHierarchy(loginCustomerId, seedCustomerId); if (customerClientToHierarchy == null) { accountsWithNoInfo.add(seedCustomerId); } else { allHierarchies.putAll(customerClientToHierarchy); } } // Prints the IDs of any accounts that did not produce hierarchy information. if (!accountsWithNoInfo.isEmpty()) { System.out.println( "Unable to retrieve information for the following accounts which are likely either test " + "accounts or accounts with setup issues. Please check the logs for details."); for (long accountId : accountsWithNoInfo) { System.out.println(accountId); } System.out.println(); } int depth = 0; // Prints the hierarchy information for all accounts for which there is hierarchy information // available. for (CustomerClient rootCustomerClient : allHierarchies.keySet()) { System.out.printf("Hierarchy of customer ID %d:%n", rootCustomerClient.getId()); printAccountHierarchy(rootCustomerClient, allHierarchies.get(rootCustomerClient), depth); System.out.println(); } } /** * Creates a map between a CustomerClient and each of its managers' mappings. * * @param loginCustomerId the loginCustomerId used to create the GoogleAdsClient. * @param seedCustomerId the ID of the customer at the root of the tree. * @return a map between a CustomerClient and each of its managers' mappings if the account * hierarchy can be retrieved. If the account hierarchy cannot be retrieved, returns null. * @throws IOException if a Google Ads Client is not successfully created. */ private Map<CustomerClient, Multimap<Long, CustomerClient>> createCustomerClientToHierarchy( Long loginCustomerId, long seedCustomerId) throws IOException { Queue<Long> managerAccountsToSearch = new LinkedList<>(); CustomerClient rootCustomerClient = null; // Creates a GoogleAdsClient with the specified loginCustomerId. See // https://developers.google.com/google-ads/api/docs/concepts/call-structure#cid for more // information. GoogleAdsClient googleAdsClient = GoogleAdsClient.newBuilder() .fromPropertiesFile() .setLoginCustomerId(loginCustomerId == null ? seedCustomerId : loginCustomerId) .build(); // Creates the Google Ads Service client. try (GoogleAdsServiceClient googleAdsServiceClient = googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) { // Creates a query that retrieves all child accounts of the manager specified in search // calls below. String query = "SELECT customer_client.client_customer, customer_client.level, " + "customer_client.manager, customer_client.descriptive_name, " + "customer_client.currency_code, customer_client.time_zone, " + "customer_client.id " + "FROM customer_client " + "WHERE customer_client.level <= 1"; // Adds the seed customer ID to the list of IDs to be processed. managerAccountsToSearch.add(seedCustomerId); // Performs a breadth-first search algorithm to build a mapping of managers to their // child accounts. Multimap<Long, CustomerClient> customerIdsToChildAccounts = ArrayListMultimap.create(); while (!managerAccountsToSearch.isEmpty()) { long customerIdToSearchFrom = managerAccountsToSearch.poll(); SearchPagedResponse response; try { // Issues a search request. response = googleAdsServiceClient.search( SearchGoogleAdsRequest.newBuilder() .setQuery(query) .setCustomerId(Long.toString(customerIdToSearchFrom)) .build()); // Iterates over all rows in all pages to get all customer clients under the specified // customer's hierarchy. for (GoogleAdsRow googleAdsRow : response.iterateAll()) { CustomerClient customerClient = googleAdsRow.getCustomerClient(); // Gets the CustomerClient object for the root customer in the tree. if (customerClient.getId() == seedCustomerId) { rootCustomerClient = customerClient; } // The steps below map parent and children accounts. Continue here so that manager // accounts exclude themselves from the list of their children accounts. if (customerClient.getId() == customerIdToSearchFrom) { continue; } // For all level-1 (direct child) accounts that are manager accounts, the above // query will be run against them to create a map of managers to their // child accounts for printing the hierarchy afterwards. customerIdsToChildAccounts.put(customerIdToSearchFrom, customerClient); // Checks if the child account is a manager itself so that it can later be processed // and added to the map if it hasn't been already. if (customerClient.getManager()) { // A customer can be managed by multiple managers, so to prevent visiting the same // customer multiple times, we need to check if it's already in the map. boolean alreadyVisited = customerIdsToChildAccounts.containsKey(customerClient.getId()); if (!alreadyVisited && customerClient.getLevel() == 1) { managerAccountsToSearch.add(customerClient.getId()); } } } } catch (GoogleAdsException gae) { System.out.printf( "Unable to retrieve hierarchy for customer ID %d: %s%n", customerIdToSearchFrom, gae.getGoogleAdsFailure().getErrors(0).getMessage()); return null; } } // The rootCustomerClient will be null if the account hierarchy was unable to be retrieved // (e.g. the account is a test account or a client account with an incomplete billing setup). // This method returns null in these cases to add the seedCustomerId to the list of // customer IDs for which the account hierarchy could not be retrieved. if (rootCustomerClient == null) { return null; } Map<CustomerClient, Multimap<Long, CustomerClient>> customerClientToHierarchy = new HashMap<>(); customerClientToHierarchy.put(rootCustomerClient, customerIdsToChildAccounts); return customerClientToHierarchy; } } /** * Retrieves a list of accessible customers with the provided set up credentials. * * @param googleAdsClient the Google Ads API client. * @return a list of customer IDs. */ private List<Long> getAccessibleCustomers(GoogleAdsClient googleAdsClient) { List<Long> seedCustomerIds = new ArrayList<>(); // Issues a request for listing all accessible customers by this authenticated Google account. try (CustomerServiceClient customerServiceClient = googleAdsClient.getLatestVersion().createCustomerServiceClient()) { ListAccessibleCustomersResponse accessibleCustomers = customerServiceClient.listAccessibleCustomers( ListAccessibleCustomersRequest.newBuilder().build()); System.out.println( "No manager customer ID is specified. The example will print the " + "hierarchies of all accessible customer IDs:"); for (String customerResourceName : accessibleCustomers.getResourceNamesList()) { Long customer = Long.parseLong(CustomerName.parse(customerResourceName).getCustomerId()); System.out.println(customer); seedCustomerIds.add(customer); } } return seedCustomerIds; } /** * Prints the specified account's hierarchy using recursion. * * @param customerClient the customer client whose info will be printed and its child accounts * will be processed if it's a manager. * @param customerIdsToChildAccounts a map containing the account hierarchy information. * @param depth the current depth we are printing from in the account hierarchy. */ private void printAccountHierarchy( CustomerClient customerClient, Multimap<Long, CustomerClient> customerIdsToChildAccounts, int depth) { String leadingSpace = " "; if (depth == 0) { System.out.println("Customer ID (Descriptive Name, Currency Code, Time Zone"); leadingSpace = ""; } else { System.out.println("|"); } System.out.print(Strings.repeat("-", depth * 2)); long customerId = customerClient.getId(); System.out.printf( leadingSpace + "%d ('%s', '%s', '%s')%n", customerId, customerClient.getDescriptiveName(), customerClient.getCurrencyCode(), customerClient.getTimeZone()); // Recursively calls this function for all child accounts of customerClient if the current // customer is a manager account. for (CustomerClient childCustomer : customerIdsToChildAccounts.get(customerId)) { printAccountHierarchy(childCustomer, customerIdsToChildAccounts, depth + 1); } } }
C#
// Copyright 2020 Google LLC // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. using CommandLine; using Google.Ads.Gax.Examples; using Google.Ads.GoogleAds.Lib; using Google.Ads.GoogleAds.V17.Resources; using Google.Ads.GoogleAds.V17.Services; using Google.Api.Gax; using System; using System.Collections.Generic; namespace Google.Ads.GoogleAds.Examples.V17 { /// <summary> /// This example gets the account hierarchy of the specified manager account. If you don't /// specify manager customer ID, the example will instead print the hierarchies of all /// accessible customer accounts for your authenticated Google account. /// Note that if the list of accessible customers for your authenticated Google account /// includes accounts within the same hierarchy, this example will retrieve and print /// the overlapping portions of the hierarchy for each accessible customer. /// </summary> public class GetAccountHierarchy : ExampleBase { /// <summary> /// Command line options for running the <see cref="GetAccountHierarchy"/> example. /// </summary> public class Options : OptionsBase { /// <summary> /// Optional manager account ID. If none provided, this method will instead list the /// accounts accessible from the authenticated Google Ads account. /// </summary> [Option("managerCustomerId", Required = true, HelpText = "Optional manager account ID. If none provided, this method will instead list the" + " accounts accessible from the authenticated Google Ads account.")] public long? ManagerCustomerId { get; set; } /// <summary> /// The login customer ID used to create the GoogleAdsClient. /// </summary> [Option("loginCustomerId", Required = false, HelpText = "The login customer ID used to create the GoogleAdsClient.")] public long? LoginCustomerId { get; set; } } /// <summary> /// Main method, to run this code example as a standalone application. /// </summary> /// <param name="args">The command line arguments.</param> public static void Main(string[] args) { Options options = ExampleUtilities.ParseCommandLine<Options>(args); GetAccountHierarchy codeExample = new GetAccountHierarchy(); Console.WriteLine(codeExample.Description); codeExample.Run(new GoogleAdsClient(), options.ManagerCustomerId, options.LoginCustomerId); } /// <summary> /// Returns a description about the code example. /// </summary> public override string Description => "This code example gets the account hierarchy of a specified manager account. If " + "you don't specify a manager customer ID, the example will instead print the " + "hierarchies of all accessible customer accounts for your authenticated " + "Google account."; /// <summary> /// Runs the code example. /// </summary> /// <param name="googleAdsClient">The Google Ads client instance.</param> /// <param name="managerCustomerId">Optional manager account ID. If none provided, this method /// will instead list the accounts accessible from the authenticated Google Ads account. /// </param> /// <param name="loginCustomerId">The login customer ID used to create the GoogleAdsClient. /// </param> public void Run(GoogleAdsClient googleAdsClient, long? managerCustomerId = null, long? loginCustomerId = null) { if (loginCustomerId.HasValue) { googleAdsClient.Config.LoginCustomerId = loginCustomerId.Value.ToString(); } GoogleAdsServiceClient googleAdsServiceClient = googleAdsClient.GetService(Services.V17.GoogleAdsService); CustomerServiceClient customerServiceClient = googleAdsClient.GetService(Services.V17.CustomerService); // List of Customer IDs to handle. List<long> seedCustomerIds = new List<long>(); // If a Manager ID was provided in the customerId parameter, it will be the only ID // in the list. Otherwise, we will issue a request for all customers accessible by // this authenticated Google account. if (managerCustomerId.HasValue) { seedCustomerIds.Add(managerCustomerId.Value); } else { Console.WriteLine( "No manager customer ID is specified. The example will print the hierarchies" + " of all accessible customer IDs:"); string[] customerResourceNames = customerServiceClient.ListAccessibleCustomers(); foreach (string customerResourceName in customerResourceNames) { CustomerName customerName = CustomerName.Parse(customerResourceName); Console.WriteLine(customerName.CustomerId); seedCustomerIds.Add(long.Parse(customerName.CustomerId)); } Console.WriteLine(); } // Create a query that retrieves all child accounts of the manager specified in // search calls below. const string query = @"SELECT customer_client.client_customer, customer_client.level, customer_client.manager, customer_client.descriptive_name, customer_client.currency_code, customer_client.time_zone, customer_client.id FROM customer_client WHERE customer_client.level <= 1"; // Perform a breadth-first search to build a Dictionary that maps managers to their // child accounts. Dictionary<long, List<CustomerClient>> customerIdsToChildAccounts = new Dictionary<long, List<CustomerClient>>(); foreach (long seedCustomerId in seedCustomerIds) { Queue<long> unprocessedCustomerIds = new Queue<long>(); unprocessedCustomerIds.Enqueue(seedCustomerId); CustomerClient rootCustomerClient = null; while (unprocessedCustomerIds.Count > 0) { managerCustomerId = unprocessedCustomerIds.Dequeue(); PagedEnumerable<SearchGoogleAdsResponse, GoogleAdsRow> response = googleAdsServiceClient.Search( managerCustomerId.ToString(), query ); // Iterate over all rows in all pages to get all customer clients under the // specified customer's hierarchy. foreach (GoogleAdsRow googleAdsRow in response) { CustomerClient customerClient = googleAdsRow.CustomerClient; // The customer client that with level 0 is the specified customer. if (customerClient.Level == 0) { if (rootCustomerClient == null) { rootCustomerClient = customerClient; } continue; } // For all level-1 (direct child) accounts that are a manager account, // the above query will be run against them to create a Dictionary of // managers mapped to their child accounts for printing the hierarchy // afterwards. if (!customerIdsToChildAccounts.ContainsKey(managerCustomerId.Value)) customerIdsToChildAccounts.Add(managerCustomerId.Value, new List<CustomerClient>()); customerIdsToChildAccounts[managerCustomerId.Value].Add(customerClient); if (customerClient.Manager) // A customer can be managed by multiple managers, so to prevent // visiting the same customer many times, we need to check if it's // already in the Dictionary. if (!customerIdsToChildAccounts.ContainsKey(customerClient.Id) && customerClient.Level == 1) unprocessedCustomerIds.Enqueue(customerClient.Id); } } if (rootCustomerClient != null) { Console.WriteLine("The hierarchy of customer ID {0} is printed below:", rootCustomerClient.Id); PrintAccountHierarchy(rootCustomerClient, customerIdsToChildAccounts, 0); Console.WriteLine(); } else { Console.WriteLine( "Customer ID {0} is likely a test account, so its customer client " + " information cannot be retrieved.", managerCustomerId); } } } /// <summary> /// Prints the specified account's hierarchy using recursion. /// <param name="customerClient"> /// the customer client whose info will be printed and /// its child accounts will be processed if it's a manager /// </param> /// <param name="customerIdsToChildAccounts"> a Dictionary mapping customer IDs to /// child accounts</param> /// <param name="depth"> the current integer depth we are printing from in the /// account hierarchy</param> /// </summary> private void PrintAccountHierarchy(CustomerClient customerClient, Dictionary<long, List<CustomerClient>> customerIdsToChildAccounts, int depth) { if (depth == 0) Console.WriteLine("Customer ID (Descriptive Name, Currency Code, Time Zone)"); long customerId = customerClient.Id; Console.Write(new string('-', depth * 2)); Console.WriteLine("{0} ({1}, {2}, {3})", customerId, customerClient.DescriptiveName, customerClient.CurrencyCode, customerClient.TimeZone); // Recursively call this function for all child accounts of $customerClient. if (customerIdsToChildAccounts.ContainsKey(customerId)) foreach (CustomerClient childAccount in customerIdsToChildAccounts[customerId]) PrintAccountHierarchy(childAccount, customerIdsToChildAccounts, depth + 1); } } }
PHP
<?php /** * Copyright 2019 Google LLC * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * https://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ namespace Google\Ads\GoogleAds\Examples\AccountManagement; require __DIR__ . '/../../vendor/autoload.php'; use GetOpt\GetOpt; use Google\Ads\GoogleAds\Examples\Utils\ArgumentNames; use Google\Ads\GoogleAds\Examples\Utils\ArgumentParser; use Google\Ads\GoogleAds\Lib\OAuth2TokenBuilder; use Google\Ads\GoogleAds\Lib\V17\GoogleAdsClient; use Google\Ads\GoogleAds\Lib\V17\GoogleAdsClientBuilder; use Google\Ads\GoogleAds\Lib\V17\GoogleAdsException; use Google\Ads\GoogleAds\Lib\V17\GoogleAdsServerStreamDecorator; use Google\Ads\GoogleAds\V17\Errors\GoogleAdsError; use Google\Ads\GoogleAds\V17\Resources\CustomerClient; use Google\Ads\GoogleAds\V17\Services\CustomerServiceClient; use Google\Ads\GoogleAds\V17\Services\GoogleAdsRow; use Google\Ads\GoogleAds\V17\Services\ListAccessibleCustomersRequest; use Google\Ads\GoogleAds\V17\Services\SearchGoogleAdsStreamRequest; use Google\ApiCore\ApiException; /** * Gets the account hierarchy of the specified manager customer ID and login customer ID. If you * don't specify them, the example will instead print the hierarchies of all accessible customer * accounts for your authenticated Google account. Note that if the list of accessible customers * for your authenticated Google account includes accounts within the same hierarchy, this example * will retrieve and print the overlapping portions of the hierarchy for each accessible customer. */ class GetAccountHierarchy { // Optional: You may pass the manager customer ID on the command line or specify it here. If // neither are set, a null value will be passed to the runExample() method, and the example // will print the hierarchies of all accessible customer IDs. private const MANAGER_CUSTOMER_ID = null; // Optional: You may pass the login customer ID on the command line or specify it here if and // only if the manager customer ID is set. If the login customer ID is set neither on the // command line nor below, a null value will be passed to the runExample() method, and the // example will use each accessible customer ID as the login customer ID. private const LOGIN_CUSTOMER_ID = null; // Stores the mapping from the root customer IDs (the ones that will be used as a start point // for printing each hierarchy) to their `CustomerClient` objects. private static array $rootCustomerClients = []; public static function main() { // Either pass the required parameters for this example on the command line, or insert them // into the constants above. $options = (new ArgumentParser())->parseCommandArguments([ ArgumentNames::MANAGER_CUSTOMER_ID => GetOpt::OPTIONAL_ARGUMENT, ArgumentNames::LOGIN_CUSTOMER_ID => GetOpt::OPTIONAL_ARGUMENT ]); $managerCustomerId = $options[ArgumentNames::MANAGER_CUSTOMER_ID] ?: self::MANAGER_CUSTOMER_ID; $loginCustomerId = $options[ArgumentNames::LOGIN_CUSTOMER_ID] ?: self::LOGIN_CUSTOMER_ID; if ($managerCustomerId xor $loginCustomerId) { throw new \InvalidArgumentException( 'Both the manager customer ID and login customer ID must be provided together, ' . 'or they must both be null.' ); } // Generate a refreshable OAuth2 credential for authentication. $oAuth2Credential = (new OAuth2TokenBuilder())->fromFile()->build(); // Construct a Google Ads client configured from a properties file and the // OAuth2 credentials above. $googleAdsClient = (new GoogleAdsClientBuilder())->fromFile() ->withOAuth2Credential($oAuth2Credential) // We set this value to true to show how to use GAPIC v2 source code. You can remove the // below line if you wish to use the old-style source code. Note that in that case, you // probably need to modify some parts of the code below to make it work. // For more information, see // https://developers.devsite.corp.google.com/google-ads/api/docs/client-libs/php/gapic. ->usingGapicV2Source(true) ->build(); try { self::runExample($googleAdsClient, $managerCustomerId, $loginCustomerId); } catch (GoogleAdsException $googleAdsException) { printf( "Request with ID '%s' has failed.%sGoogle Ads failure details:%s", $googleAdsException->getRequestId(), PHP_EOL, PHP_EOL ); foreach ($googleAdsException->getGoogleAdsFailure()->getErrors() as $error) { /** @var GoogleAdsError $error */ printf( "\t%s: %s%s", $error->getErrorCode()->getErrorCode(), $error->getMessage(), PHP_EOL ); } exit(1); } catch (ApiException $apiException) { printf( "ApiException was thrown with message '%s'.%s", $apiException->getMessage(), PHP_EOL ); exit(1); } } /** * Runs the example. * * @param GoogleAdsClient $googleAdsClient the Google Ads API client * @param int|null $managerCustomerId the manager customer ID * @param int|null $loginCustomerId the login customer ID */ public static function runExample( GoogleAdsClient $googleAdsClient, ?int $managerCustomerId, ?int $loginCustomerId ) { $rootCustomerIds = []; if (is_null($managerCustomerId)) { // We will get the account hierarchies for all accessible customers. $rootCustomerIds = self::getAccessibleCustomers($googleAdsClient); } else { // We will get only the hierarchy for the provided manager customer ID when it's // provided. $rootCustomerIds[] = $managerCustomerId; } $allHierarchies = []; $accountsWithNoInfo = []; // Constructs a map of account hierarchies. foreach ($rootCustomerIds as $rootCustomerId) { $customerClientToHierarchy = self::createCustomerClientToHierarchy($loginCustomerId, $rootCustomerId); if (is_null($customerClientToHierarchy)) { $accountsWithNoInfo[] = $rootCustomerId; } else { $allHierarchies += $customerClientToHierarchy; } } // Prints the IDs of any accounts that did not produce hierarchy information. if (!empty($accountsWithNoInfo)) { print 'Unable to retrieve information for the following accounts which are likely ' . 'either test accounts or accounts with setup issues. Please check the logs for ' . 'details:' . PHP_EOL; foreach ($accountsWithNoInfo as $accountId) { print $accountId . PHP_EOL; } print PHP_EOL; } // Prints the hierarchy information for all accounts for which there is hierarchy info // available. foreach ($allHierarchies as $rootCustomerId => $customerIdsToChildAccounts) { printf( "The hierarchy of customer ID %d is printed below:%s", $rootCustomerId, PHP_EOL ); self::printAccountHierarchy( self::$rootCustomerClients[$rootCustomerId], $customerIdsToChildAccounts, 0 ); print PHP_EOL; } } /** * Creates a map between a customer client and each of its managers' mappings. * * @param int|null $loginCustomerId the login customer ID used to create the GoogleAdsClient * @param int $rootCustomerId the ID of the customer at the root of the tree * @return array|null a map between a customer client and each of its managers' mappings if the * account hierarchy can be retrieved. If the account hierarchy cannot be retrieved, returns * null */ private static function createCustomerClientToHierarchy( ?int $loginCustomerId, int $rootCustomerId ): ?array { // Creates a GoogleAdsClient with the specified login customer ID. See // https://developers.google.com/google-ads/api/docs/concepts/call-structure#cid for more // information. // Generate a refreshable OAuth2 credential for authentication. $oAuth2Credential = (new OAuth2TokenBuilder())->fromFile()->build(); // Construct a Google Ads client configured from a properties file and the // OAuth2 credentials above. $googleAdsClient = (new GoogleAdsClientBuilder())->fromFile() ->withOAuth2Credential($oAuth2Credential) ->withLoginCustomerId($loginCustomerId ?? $rootCustomerId) // We set this value to true to show how to use GAPIC v2 source code. You can remove the // below line if you wish to use the old-style source code. Note that in that case, you // probably need to modify some parts of the code below to make it work. // For more information, see // https://developers.devsite.corp.google.com/google-ads/api/docs/client-libs/php/gapic. ->usingGapicV2Source(true) ->build(); // Creates the Google Ads Service client. $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient(); // Creates a query that retrieves all child accounts of the manager specified in search // calls below. $query = 'SELECT customer_client.client_customer, customer_client.level,' . ' customer_client.manager, customer_client.descriptive_name,' . ' customer_client.currency_code, customer_client.time_zone,' . ' customer_client.id FROM customer_client WHERE customer_client.level <= 1'; $rootCustomerClient = null; // Adds the root customer ID to the list of IDs to be processed. $managerCustomerIdsToSearch = [$rootCustomerId]; // Performs a breadth-first search algorithm to build an associative array mapping // managers to their child accounts ($customerIdsToChildAccounts). $customerIdsToChildAccounts = []; while (!empty($managerCustomerIdsToSearch)) { $customerIdToSearch = array_shift($managerCustomerIdsToSearch); // Issues a search request. /** @var GoogleAdsServerStreamDecorator $stream */ $stream = $googleAdsServiceClient->searchStream(SearchGoogleAdsStreamRequest::build( $customerIdToSearch, $query )); // Iterates over all elements to get all customer clients under the specified customer's // hierarchy. foreach ($stream->iterateAllElements() as $googleAdsRow) { /** @var GoogleAdsRow $googleAdsRow */ $customerClient = $googleAdsRow->getCustomerClient(); // Gets the CustomerClient object for the root customer in the tree. if ($customerClient->getId() === $rootCustomerId) { $rootCustomerClient = $customerClient; self::$rootCustomerClients[$rootCustomerId] = $rootCustomerClient; } // The steps below map parent and children accounts. Continue here so that managers // accounts exclude themselves from the list of their children accounts. if ($customerClient->getId() === $customerIdToSearch) { continue; } // For all level-1 (direct child) accounts that are a manager account, the above // query will be run against them to create an associative array of managers to // their child accounts for printing the hierarchy afterwards. $customerIdsToChildAccounts[$customerIdToSearch][] = $customerClient; // Checks if the child account is a manager itself so that it can later be processed // and added to the map if it hasn't been already. if ($customerClient->getManager()) { // A customer can be managed by multiple managers, so to prevent visiting // the same customer multiple times, we need to check if it's already in the // map. $alreadyVisited = array_key_exists( $customerClient->getId(), $customerIdsToChildAccounts ); if (!$alreadyVisited && $customerClient->getLevel() === 1) { array_push($managerCustomerIdsToSearch, $customerClient->getId()); } } } } return is_null($rootCustomerClient) ? null : [$rootCustomerClient->getId() => $customerIdsToChildAccounts]; } /** * Retrieves a list of accessible customers with the provided set up credentials. * * @param GoogleAdsClient $googleAdsClient the Google Ads API client * @return int[] the list of customer IDs */ private static function getAccessibleCustomers(GoogleAdsClient $googleAdsClient): array { $accessibleCustomerIds = []; // Issues a request for listing all customers accessible by this authenticated Google // account. $customerServiceClient = $googleAdsClient->getCustomerServiceClient(); $accessibleCustomers = $customerServiceClient->listAccessibleCustomers(new ListAccessibleCustomersRequest()); print 'No manager customer ID is specified. The example will print the hierarchies of' . ' all accessible customer IDs:' . PHP_EOL; foreach ($accessibleCustomers->getResourceNames() as $customerResourceName) { $customer = CustomerServiceClient::parseName($customerResourceName)['customer_id']; print $customer . PHP_EOL; $accessibleCustomerIds[] = intval($customer); } print PHP_EOL; return $accessibleCustomerIds; } /** * Prints the specified account's hierarchy using recursion. * * @param CustomerClient $customerClient the customer client whose info will be printed and * its child accounts will be processed if it's a manager * @param array $customerIdsToChildAccounts a map from customer IDs to child * accounts * @param int $depth the current depth we are printing from in the * account hierarchy */ private static function printAccountHierarchy( CustomerClient $customerClient, array $customerIdsToChildAccounts, int $depth ) { if ($depth === 0) { print 'Customer ID (Descriptive Name, Currency Code, Time Zone)' . PHP_EOL; } $customerId = $customerClient->getId(); print str_repeat('-', $depth * 2); printf( " %d ('%s', '%s', '%s')%s", $customerId, $customerClient->getDescriptiveName(), $customerClient->getCurrencyCode(), $customerClient->getTimeZone(), PHP_EOL ); // Recursively call this function for all child accounts of $customerClient. if (array_key_exists($customerId, $customerIdsToChildAccounts)) { foreach ($customerIdsToChildAccounts[$customerId] as $childAccount) { self::printAccountHierarchy($childAccount, $customerIdsToChildAccounts, $depth + 1); } } } } GetAccountHierarchy::main();
Python
#!/usr/bin/env python # Copyright 2020 Google LLC # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. """Gets the account hierarchy of the given MCC and login customer ID. If you don't specify manager ID and login customer ID, the example will instead print the hierarchies of all accessible customer accounts for your authenticated Google account. Note that if the list of accessible customers for your authenticated Google account includes accounts within the same hierarchy, this example will retrieve and print the overlapping portions of the hierarchy for each accessible customer. """ import argparse import sys from google.ads.googleads.client import GoogleAdsClient from google.ads.googleads.errors import GoogleAdsException def main(client, login_customer_id=None): """Gets the account hierarchy of the given MCC and login customer ID. Args: client: The Google Ads client. login_customer_id: Optional manager account ID. If none provided, this method will instead list the accounts accessible from the authenticated Google Ads account. """ # Gets instances of the GoogleAdsService and CustomerService clients. googleads_service = client.get_service("GoogleAdsService") customer_service = client.get_service("CustomerService") # A collection of customer IDs to handle. seed_customer_ids = [] # Creates a query that retrieves all child accounts of the manager # specified in search calls below. query = """ SELECT customer_client.client_customer, customer_client.level, customer_client.manager, customer_client.descriptive_name, customer_client.currency_code, customer_client.time_zone, customer_client.id FROM customer_client WHERE customer_client.level <= 1""" # If a Manager ID was provided in the customerId parameter, it will be # the only ID in the list. Otherwise, we will issue a request for all # customers accessible by this authenticated Google account. if login_customer_id is not None: seed_customer_ids = [login_customer_id] else: print( "No manager ID is specified. The example will print the " "hierarchies of all accessible customer IDs." ) customer_resource_names = ( customer_service.list_accessible_customers().resource_names ) for customer_resource_name in customer_resource_names: customer_id = googleads_service.parse_customer_path( customer_resource_name )["customer_id"] print(customer_id) seed_customer_ids.append(customer_id) for seed_customer_id in seed_customer_ids: # Performs a breadth-first search to build a Dictionary that maps # managers to their child accounts (customerIdsToChildAccounts). unprocessed_customer_ids = [seed_customer_id] customer_ids_to_child_accounts = dict() root_customer_client = None while unprocessed_customer_ids: customer_id = int(unprocessed_customer_ids.pop(0)) response = googleads_service.search( customer_id=str(customer_id), query=query ) # Iterates over all rows in all pages to get all customer # clients under the specified customer's hierarchy. for googleads_row in response: customer_client = googleads_row.customer_client # The customer client that with level 0 is the specified # customer. if customer_client.level == 0: if root_customer_client is None: root_customer_client = customer_client continue # For all level-1 (direct child) accounts that are a # manager account, the above query will be run against them # to create a Dictionary of managers mapped to their child # accounts for printing the hierarchy afterwards. if customer_id not in customer_ids_to_child_accounts: customer_ids_to_child_accounts[customer_id] = [] customer_ids_to_child_accounts[customer_id].append( customer_client ) if customer_client.manager: # A customer can be managed by multiple managers, so to # prevent visiting the same customer many times, we # need to check if it's already in the Dictionary. if ( customer_client.id not in customer_ids_to_child_accounts and customer_client.level == 1 ): unprocessed_customer_ids.append(customer_client.id) if root_customer_client is not None: print( "The hierarchy of customer ID " f"{root_customer_client.id} is printed below:" ) print_account_hierarchy( root_customer_client, customer_ids_to_child_accounts, 0 ) else: print( f"Customer ID {login_customer_id} is likely a test " "account, so its customer client information cannot be " "retrieved." ) def print_account_hierarchy( customer_client, customer_ids_to_child_accounts, depth ): """Prints the specified account's hierarchy using recursion. Args: customer_client: The customer client whose info will be printed; its child accounts will be processed if it's a manager. customer_ids_to_child_accounts: A dictionary mapping customer IDs to child accounts. depth: The current integer depth we are printing from in the account hierarchy. """ if depth == 0: print("Customer ID (Descriptive Name, Currency Code, Time Zone)") customer_id = customer_client.id print("-" * (depth * 2), end="") print( f"{customer_id} ({customer_client.descriptive_name}, " f"{customer_client.currency_code}, " f"{customer_client.time_zone})" ) # Recursively call this function for all child accounts of customer_client. if customer_id in customer_ids_to_child_accounts: for child_account in customer_ids_to_child_accounts[customer_id]: print_account_hierarchy( child_account, customer_ids_to_child_accounts, depth + 1 ) if __name__ == "__main__": parser = argparse.ArgumentParser( description="This example gets the account hierarchy of the specified " "manager account and login customer ID." ) # The following argument(s) should be provided to run the example. parser.add_argument( "-l", "--login_customer_id", "--manager_customer_id", type=str, required=False, help="Optional manager " "account ID. If none provided, the example will " "instead list the accounts accessible from the " "authenticated Google Ads account.", ) args = parser.parse_args() # GoogleAdsClient will read the google-ads.yaml configuration file in the # home directory if none is specified. googleads_client = GoogleAdsClient.load_from_storage(version="v17") try: main(googleads_client, args.login_customer_id) except GoogleAdsException as ex: print( f'Request with ID "{ex.request_id}" failed with status ' f'"{ex.error.code().name}" and includes the following errors:' ) for error in ex.failure.errors: print(f'\tError with message "{error.message}".') if error.location: for field_path_element in error.location.field_path_elements: print(f"\t\tOn field: {field_path_element.field_name}") sys.exit(1)
Ruby
#!/usr/bin/env ruby # Encoding: utf-8 # # Copyright 2020 Google LLC # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # # This example gets the account hierarchy of the specified manager account. # If you don't specify manager customer ID, the example will instead print the # hierarchies of all accessible customer accounts for your authenticated # Google account. # Note that if the list of accessible customers for your authenticated Google # account includes accounts within the same hierarchy, this example will # retrieve and print the overlapping portions of the hierarchy for each # accessible customer. require 'optparse' require 'google/ads/google_ads' require 'thread' def get_account_hierarchy(manager_customer_id, login_customer_id) # GoogleAdsClient will read a config file from # ENV['HOME']/google_ads_config.rb when called without parameters client = Google::Ads::GoogleAds::GoogleAdsClient.new # Set the specified login customer ID. client.configure do |config| if login_customer_id config.login_customer_id = login_customer_id.to_i elsif manager_customer_id config.login_customer_id = manager_customer_id.to_i end end google_ads_service = client.service.google_ads seed_customer_ids = [] if manager_customer_id seed_customer_ids << manager_customer_id else puts 'No manager customer ID is specified. The example will print the ' + 'hierarchies of all accessible customer IDs:' customer_resource_names = client.service.customer. list_accessible_customers().resource_names customer_resource_names.each do |res| seed_customer_ids << res.split('/')[1] end end search_query = <<~QUERY SELECT customer_client.client_customer, customer_client.level, customer_client.manager, customer_client.descriptive_name, customer_client.currency_code, customer_client.time_zone, customer_client.id FROM customer_client WHERE customer_client.level <= 1 QUERY seed_customer_ids.each do |seed_cid| # Performs a breadth-first search to build a dictionary that maps managers # to their child accounts (cid_to_children). unprocessed_customer_ids = Queue.new unprocessed_customer_ids << seed_cid cid_to_children = Hash.new { |h, k| h[k] = [] } root_customer_client = nil while unprocessed_customer_ids.size > 0 cid = unprocessed_customer_ids.pop response = google_ads_service.search( customer_id: cid, query: search_query, page_size: PAGE_SIZE, ) # Iterates over all rows in all pages to get all customer clients under # the specified customer's hierarchy. response.each do |row| customer_client = row.customer_client # The customer client that with level 0 is the specified customer if customer_client.level == 0 if root_customer_client == nil root_customer_client = customer_client end next end # For all level-1 (direct child) accounts that are a manager account, # the above query will be run against them to create a dictionary of # managers mapped to their child accounts for printing the hierarchy # afterwards. cid_to_children[cid.to_s] << customer_client unless customer_client.manager.nil? if !cid_to_children.key?(customer_client.id.to_s) && customer_client.level == 1 unprocessed_customer_ids << customer_client.id.to_s end end end end if root_customer_client puts "The hierarychy of customer ID #{root_customer_client.id} " + "is printed below:" print_account_hierarchy(root_customer_client, cid_to_children, 0) else puts "Customer ID #{manager_customer_id} is likely a test account, " \ "so its customer client information cannot be retrieved." end end end def print_account_hierarchy(customer_client, cid_to_children, depth) if depth == 0 puts 'Customer ID (Descriptive Name, Currency Code, Time Zone)' end customer_id = customer_client.id puts '-' * (depth * 2) + "#{customer_id} #{customer_client.descriptive_name} " + "#{customer_client.currency_code} #{customer_client.time_zone}" # Recursively call this function for all child accounts of customer_client if cid_to_children.key?(customer_id.to_s) cid_to_children[customer_id.to_s].each do |child| print_account_hierarchy(child, cid_to_children, depth + 1) end end end if __FILE__ == $PROGRAM_NAME PAGE_SIZE = 1000 options = {} # The following parameter(s) should be provided to run the example. You can # either specify these by changing the INSERT_XXX_ID_HERE values below, or on # the command line. # # Parameters passed on the command line will override any parameters set in # code. # # Running the example with -h will print the command line usage. options[:customer_id] = nil OptionParser.new do |opts| opts.banner = sprintf('Usage: ruby %s [options]', File.basename(__FILE__)) opts.separator '' opts.separator 'Options:' opts.on('-M', '--manager-customer-id MANAGER-CUSTOMER-ID', String, 'Manager Customer ID (optional)') do |v| options[:manager_customer_id] = v.tr("-", "") end opts.on('-L', '--login-customer-id LOGIN-CUSTOMER-ID', String, 'Login Customer ID (optional)') do |v| options[:login_customer_id] = v.tr("-", "") end opts.separator '' opts.separator 'Help:' opts.on_tail('-h', '--help', 'Show this message') do puts opts exit end end.parse! begin get_account_hierarchy( options[:manager_customer_id], options[:login_customer_id], ) rescue Google::Ads::GoogleAds::Errors::GoogleAdsError => e e.failure.errors.each do |error| STDERR.printf("Error with message: %s\n", error.message) if error.location error.location.field_path_elements.each do |field_path_element| STDERR.printf("\tOn field: %s\n", field_path_element.field_name) end end error.error_code.to_h.each do |k, v| next if v == :UNSPECIFIED STDERR.printf("\tType: %s\n\tCode: %s\n", k, v) end end raise end end
Perl
#!/usr/bin/perl -w # # Copyright 2020, Google LLC # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # # Gets the account hierarchy of the specified manager customer ID and login customer # ID. If you don't specify them, the example will instead print the hierarchies # of all accessible customer accounts for your authenticated Google account. # # Note that if the list of accessible customers for your authenticated Google # account includes accounts within the same hierarchy, this example will retrieve # and print the overlapping portions of the hierarchy for each accessible customer. use strict; use warnings; use utf8; use FindBin qw($Bin); use lib "$Bin/../../lib"; use Google::Ads::GoogleAds::Client; use Google::Ads::GoogleAds::Utils::GoogleAdsHelper; use Google::Ads::GoogleAds::Utils::SearchStreamHandler; use Google::Ads::GoogleAds::V17::Services::GoogleAdsService::SearchGoogleAdsStreamRequest; use Getopt::Long qw(:config auto_help); use Pod::Usage; use Cwd qw(abs_path); # The following parameter(s) should be provided to run the example. You can # either specify these by changing the INSERT_XXX_ID_HERE values below, or on # the command line. # # Parameters passed on the command line will override any parameters set in # code. # # Running the example with -h will print the command line usage. # # Optional: You may pass the manager customer ID on the command line or specify # it here. If neither are set, a null value will be passed to run the example, # and the example will print the hierarchies of all accessible customer IDs. my $manager_customer_id = undef; # Optional: You may pass the login customer ID on the command line or specify it # here if and only if the manager customer ID is set. If the login customer ID # is set neither on the command line nor below, a null value will be passed to # run the example, and the example will use each accessible customer ID as the # login customer ID. my $login_customer_id = undef; # Stores the mapping from the root customer IDs (the ones that will be used as a # start point for printing each hierarchy) to their `CustomerClient` objects. my $root_customer_clients = {}; sub get_account_hierarchy { my ($api_client, $manager_customer_id, $login_customer_id) = @_; my $root_customer_ids = []; if (not $manager_customer_id) { # Get the account hierarchies for all accessible customers. $root_customer_ids = get_accessible_customers($api_client); } else { # Only get the hierarchy for the provided manager customer ID if provided. push @$root_customer_ids, $manager_customer_id; } my $all_hierarchies = {}; my $accounts_with_no_info = []; # Construct a map of account hierarchies. foreach my $root_customer_id (@$root_customer_ids) { my $customer_client_to_hierarchy = create_customer_client_to_hierarchy($login_customer_id, $root_customer_id); if (not $customer_client_to_hierarchy) { push @$accounts_with_no_info, $root_customer_id; } else { $all_hierarchies = {%$all_hierarchies, %$customer_client_to_hierarchy}; } } # Print the IDs of any accounts that did not produce hierarchy information. if (scalar @$accounts_with_no_info > 0) { print "Unable to retrieve information for the following accounts " . "which are likely either test accounts or accounts with setup issues. " . "Please check the logs for details:\n"; foreach my $account_id (@$accounts_with_no_info) { print "$account_id\n"; } print "\n"; } # Print the hierarchy information for all accounts for which there is hierarchy # information available. foreach my $root_customer_id (keys %$all_hierarchies) { printf "The hierarchy of customer ID %d is printed below:\n", $root_customer_id; print_account_hierarchy($root_customer_clients->{$root_customer_id}, $all_hierarchies->{$root_customer_id}, 0); print "\n"; } return 1; } # Retrieves a list of accessible customers with the provided set up credentials. sub get_accessible_customers { my $api_client = shift; my $accessible_customer_ids = []; # Issue a request for listing all customers accessible by this authenticated # Google account. my $list_accessible_customers_response = $api_client->CustomerService()->list_accessible_customers(); print "No manager customer ID is specified. The example will print the " . "hierarchies of all accessible customer IDs:\n"; foreach my $customer_resource_name ( @{$list_accessible_customers_response->{resourceNames}}) { my $customer_id = $1 if $customer_resource_name =~ /(\d+)$/; print "$customer_id\n"; push @$accessible_customer_ids, $customer_id; } return $accessible_customer_ids; } # Creates a map between a customer client and each of its managers' mappings. sub create_customer_client_to_hierarchy() { my ($login_customer_id, $root_customer_id) = @_; # Create a GoogleAdsClient with the specified login customer ID. Seec # https://developers.google.com/google-ads/api/docs/concepts/call-structure#cid # for more information. my $api_client = Google::Ads::GoogleAds::Client->new({ login_customer_id => $login_customer_id || $root_customer_id }); # Get the GoogleAdsService. my $google_ads_service = $api_client->GoogleAdsService(); # Create a query that retrieves all child accounts of the manager specified in # search calls below. my $search_query = "SELECT customer_client.client_customer, customer_client.level, " . "customer_client.manager, customer_client.descriptive_name, " . "customer_client.currency_code, customer_client.time_zone, " . "customer_client.id " . "FROM customer_client WHERE customer_client.level <= 1"; my $root_customer_client = undef; # Add the root customer ID to the list of IDs to be processed. my $manager_customer_ids_to_search = [$root_customer_id]; # Perform a breadth-first search algorithm to build a mapping of managers to # their child accounts. my $customer_ids_to_child_accounts = {}; while (scalar @$manager_customer_ids_to_search > 0) { my $customer_id_to_search = shift @$manager_customer_ids_to_search; $customer_ids_to_child_accounts->{$customer_id_to_search} ||= []; my $search_stream_handler = Google::Ads::GoogleAds::Utils::SearchStreamHandler->new({ service => $google_ads_service, request => Google::Ads::GoogleAds::V17::Services::GoogleAdsService::SearchGoogleAdsStreamRequest ->new({ customerId => $customer_id_to_search, query => $search_query, })}); # Iterate over all elements to get all customer clients under the specified # customer's hierarchy. $search_stream_handler->process_contents( sub { my $google_ads_row = shift; my $customer_client = $google_ads_row->{customerClient}; # Get the CustomerClient object for the root customer in the tree. if ($customer_client->{id} == $root_customer_id) { $root_customer_client = $customer_client; $root_customer_clients->{$root_customer_id} = $root_customer_client; } # The steps below map parent and children accounts. Return here so that # manager accounts exclude themselves from the list of their children # accounts. if ($customer_client->{id} == $customer_id_to_search) { return; } # For all level-1 (direct child) accounts that are manager accounts, the # above query will be run against them to create a map of managers to their # child accounts for printing the hierarchy afterwards. push @{$customer_ids_to_child_accounts->{$customer_id_to_search}}, $customer_client; # Check if the child account is a manager itself so that it can later be # processed and added to the map if it hasn't been already. if ($customer_client->{manager}) { # A customer can be managed by multiple managers, so to prevent visiting # the same customer multiple times, we need to check if it's already # in the map. my $already_visited = exists $customer_ids_to_child_accounts->{$customer_client->{id}}; if (not $already_visited && $customer_client->{level} == 1) { push @$manager_customer_ids_to_search, $customer_client->{id}; } } }); } return $root_customer_client ? {$root_customer_client->{id} => $customer_ids_to_child_accounts} : undef; } # Prints the specified account's hierarchy using recursion. sub print_account_hierarchy { my ($customer_client, $customer_ids_to_child_accounts, $depth) = @_; if ($depth == 0) { print "Customer ID (Descriptive Name, Currency Code, Time Zone)\n"; } my $customer_id = $customer_client->{id}; print "--" x $depth; printf " %d ('%s', '%s', '%s')\n", $customer_id, $customer_client->{descriptiveName} || "", $customer_client->{currencyCode}, $customer_client->{timeZone}; # Recursively call this function for all child accounts of $customer_client. if (exists $customer_ids_to_child_accounts->{$customer_id}) { foreach my $child_account (@{$customer_ids_to_child_accounts->{$customer_id}}) { print_account_hierarchy($child_account, $customer_ids_to_child_accounts, $depth + 1); } } } # Don't run the example if the file is being included. if (abs_path($0) ne abs_path(__FILE__)) { return 1; } # Get Google Ads Client, credentials will be read from ~/googleads.properties. my $api_client = Google::Ads::GoogleAds::Client->new(); # By default examples are set to die on any server returned fault. $api_client->set_die_on_faults(1); # Parameters passed on the command line will override any parameters set in code. GetOptions( "manager_customer_id=s" => \$manager_customer_id, "login_customer_id=s" => \$login_customer_id ); if ($manager_customer_id xor $login_customer_id) { die "Both the manager customer ID and login customer ID must be " . "provided together, or they must both be null.\n"; } # Call the example. get_account_hierarchy( $api_client, $manager_customer_id ? $manager_customer_id =~ s/-//gr : undef, $login_customer_id ? $login_customer_id =~ s/-//gr : undef ); =pod =head1 NAME get_account_hierarchy =head1 DESCRIPTION Gets the account hierarchy of the specified manager customer ID and login customer ID. If you don't specify them, the example will instead print the hierarchies of all accessible customer accounts for your authenticated Google account. Note that if the list of accessible customers for your authenticated Google account includes accounts within the same hierarchy, this example will retrieve and print the overlapping portions of the hierarchy for each accessible customer. =head1 SYNOPSIS get_account_hierarchy.pl [options] -help Show the help message. -manager_customer_id [optional] The Google Ads manager customer ID. -login_customer_id [optional] The login customer ID. =cut
Per creare un account inserzionista, invia all'API Google Ads un codice precompilato
Cliente che utilizza il metodo CreateCustomerClient di
CustomerService (anziché un metodo "mutate"). Nella
CreateCustomerClient
, specifica l'ID cliente dell'account amministratore
che gestisce il nuovo cliente.
I seguenti esempi mostrano come creare un cliente (inserzionista commerciante) in un account amministratore:
Java
private void runExample(GoogleAdsClient googleAdsClient, Long managerId) { // Formats the current date/time to use as a timestamp in the new customer description. String dateTime = ZonedDateTime.now().format(DateTimeFormatter.RFC_1123_DATE_TIME); // Initializes a Customer object to be created. Customer customer = Customer.newBuilder() .setDescriptiveName("Account created with CustomerService on '" + dateTime + "'") .setCurrencyCode("USD") .setTimeZone("America/New_York") // Optional: Sets additional attributes of the customer. .setTrackingUrlTemplate("{lpurl}?device={device}") .setFinalUrlSuffix("keyword={keyword}&matchtype={matchtype}&adgroupid={adgroupid}") .build(); // Sends the request to create the customer. try (CustomerServiceClient client = googleAdsClient.getLatestVersion().createCustomerServiceClient()) { CreateCustomerClientResponse response = client.createCustomerClient(managerId.toString(), customer); System.out.printf( "Created a customer with resource name '%s' under the manager account with" + " customer ID '%d'.%n", response.getResourceName(), managerId); } }
C#
public void Run(GoogleAdsClient client, long managerCustomerId) { // Get the CustomerService. CustomerServiceClient customerService = client.GetService(Services.V17.CustomerService); Customer customer = new Customer() { DescriptiveName = $"Account created with CustomerService on '{DateTime.Now}'", // For a list of valid currency codes and time zones see this documentation: // https://developers.google.com/google-ads/api/reference/data/codes-formats#codes_formats. CurrencyCode = "USD", TimeZone = "America/New_York", // The below values are optional. For more information about URL // options see: https://support.google.com/google-ads/answer/6305348. TrackingUrlTemplate = "{lpurl}?device={device}", FinalUrlSuffix = "keyword={keyword}&matchtype={matchtype}&adgroupid={adgroupid}" }; try { // Create the account. CreateCustomerClientResponse response = customerService.CreateCustomerClient( managerCustomerId.ToString(), customer); // Display the result. Console.WriteLine($"Created a customer with resource name " + $"'{response.ResourceName}' under the manager account with customer " + $"ID '{managerCustomerId}'"); } catch (GoogleAdsException e) { Console.WriteLine("Failure:"); Console.WriteLine($"Message: {e.Message}"); Console.WriteLine($"Failure: {e.Failure}"); Console.WriteLine($"Request ID: {e.RequestId}"); throw; } }
PHP
public static function runExample(GoogleAdsClient $googleAdsClient, int $managerCustomerId) { $customer = new Customer([ 'descriptive_name' => 'Account created with CustomerService on ' . date('Ymd h:i:s'), // For a list of valid currency codes and time zones see this documentation: // https://developers.google.com/google-ads/api/reference/data/codes-formats. 'currency_code' => 'USD', 'time_zone' => 'America/New_York', // The below values are optional. For more information about URL // options see: https://support.google.com/google-ads/answer/6305348. 'tracking_url_template' => '{lpurl}?device={device}', 'final_url_suffix' => 'keyword={keyword}&matchtype={matchtype}&adgroupid={adgroupid}' ]); // Issues a mutate request to create an account $customerServiceClient = $googleAdsClient->getCustomerServiceClient(); $response = $customerServiceClient->createCustomerClient( CreateCustomerClientRequest::build($managerCustomerId, $customer) ); printf( 'Created a customer with resource name "%s" under the manager account with ' . 'customer ID %d.%s', $response->getResourceName(), $managerCustomerId, PHP_EOL ); }
Python
def main(client, manager_customer_id): customer_service = client.get_service("CustomerService") customer = client.get_type("Customer") now = datetime.today().strftime("%Y%m%d %H:%M:%S") customer.descriptive_name = f"Account created with CustomerService on {now}" # For a list of valid currency codes and time zones see this documentation: # https://developers.google.com/google-ads/api/reference/data/codes-formats customer.currency_code = "USD" customer.time_zone = "America/New_York" # The below values are optional. For more information about URL # options see: https://support.google.com/google-ads/answer/6305348 customer.tracking_url_template = "{lpurl}?device={device}" customer.final_url_suffix = ( "keyword={keyword}&matchtype={matchtype}" "&adgroupid={adgroupid}" ) response = customer_service.create_customer_client( customer_id=manager_customer_id, customer_client=customer ) print( f'Customer created with resource name "{response.resource_name}" ' f'under manager account with ID "{manager_customer_id}".' )
Ruby
def create_customer(manager_customer_id) # GoogleAdsClient will read a config file from # ENV['HOME']/google_ads_config.rb when called without parameters client = Google::Ads::GoogleAds::GoogleAdsClient.new customer = client.resource.customer do |c| c.descriptive_name = "Account created with CustomerService on #{(Time.new.to_f * 1000).to_i}" # For a list of valid currency codes and time zones, see this documentation: # https://developers.google.com/google-ads/api/reference/data/codes-formats c.currency_code = "USD" c.time_zone = "America/New_York" # The below values are optional. For more information about URL options, see: # https://support.google.com/google-ads/answer/6305348 c.tracking_url_template = "{lpurl}?device={device}" c.final_url_suffix = "keyword={keyword}&matchtype={matchtype}&adgroupid={adgroupid}" end response = client.service.customer.create_customer_client( customer_id: manager_customer_id, customer_client: customer ) puts "Created a customer with resource name #{response.resource_name} under" + " the manager account with customer ID #{manager_customer_id}." end
Perl
sub create_customer { my ($api_client, $manager_customer_id) = @_; # Initialize a customer to be created. my $customer = Google::Ads::GoogleAds::V17::Resources::Customer->new({ descriptiveName => "Account created with CustomerService on #" . uniqid(), # For a list of valid currency codes and time zones, see this documentation: # https://developers.google.com/google-ads/api/reference/data/codes-formats currencyCode => "USD", timeZone => "America/New_York", # The below values are optional. For more information about URL options, see: # https://support.google.com/google-ads/answer/6305348 trackingUrlTemplate => "{lpurl}?device={device}", finalUrlSuffix => "keyword={keyword}&matchtype={matchtype}&adgroupid={adgroupid}" }); # Create the customer client. my $create_customer_client_response = $api_client->CustomerService()->create_customer_client({ customerId => $manager_customer_id, customerClient => $customer }); printf "Created a customer with resource name '%s' under the manager account " . "with customer ID %d.\n", $create_customer_client_response->{resourceName}, $manager_customer_id; return 1; }
Se il commerciante vuole utilizzare un account Google Ads esistente, verifica se
utilizzando il metodo ListAccessibleCustomers
di CustomerService.
Una volta selezionato l'account da utilizzare, crea un collegamento tra
tra gli account Google Ads
e il tuo account amministratore. Il collegamento di due account deve sempre
essere avviato dall'account amministratore. Il collegamento deve essere accettato da
l'account cliente. Lo stato del collegamento viene archiviato nel campo dello stato della
CustomerClientLink
oppure CustomerManagerLink
. Consulta le
elenco di stati validi. Utilizza IN ATTESA per avviare il collegamento e ATTIVO per
accetta il collegamento.
Il collegamento di due account Google Ads preesistenti può essere eseguito in tre passaggi.
Durante l'autenticazione come account amministratore, estendi un invito ai account cliente creando un CustomerClientLink con stato IN ATTESA.
Durante l'autenticazione come account amministratore, esegui una query su GoogleAdsService. per trovare la
manager_link_id
del CustomerClientLink che hai creato.Durante l'autenticazione come account cliente, accetta l'invito dal l'account amministratore modificando lo stato in
CustomerManagerLink
ATTIVO.