4.2 Creazione di campagne pubblicitarie

Introduzione

---

Una volta completati correttamente i passaggi precedenti, puoi attivare la per creare campagne Performance Max per la vendita al dettaglio e usare imparare a prendere la decisione più intelligente per la pubblicazione di ogni annuncio.

Per capire che cosa devono fare gli inserzionisti manualmente nell'interfaccia utente di Google Ads per Per creare una campagna Performance Max, consulta l'articolo Creare una campagna Performance Max. Questa sezione descrive come utilizzare l'API Google Ads per attivare inserzionisti di creare campagne Performance Max per gli annunci Shopping.

Nota: se hai scelto l'opzione di reindirizzamento, non è richiesta l'integrazione dell'API per la creazione della campagna.

Solo le funzionalità di base della campagna che apportano il massimo valore al tuo i commercianti e minimizzando la complessità dell'implementazione sono trattati in questo . Per ogni campagna, ti consigliamo di fornire le seguenti tre opzioni di personalizzazione disponibili per i tuoi commercianti:

• Nome campagna: mostra come viene visualizzata la campagna nei report.

• Budget: l'importo che dovrebbe spendere in media per la campagna.

• Targeting geografico:punto in cui la campagna deve pubblicare gli annunci.

di Gemini Advanced.

Note sul targeting geografico:

• Questa funzionalità è consigliata, ma facoltativa nel caso in cui volessi ridurre ulteriormente la complessità dell'integrazione. Non è disponibile nell'opzione di reindirizzamento.
• Se questo campo viene omesso, i prodotti verranno pubblicati in tutti i paesi idonei. Se un prodotto non è idoneo alla pubblicazione in un determinato paese (ad es. non soddisfa i requisiti di spedizione), viene escluso automaticamente dalla campagna, senza che sia richiesta alcuna azione.

Inoltre, nel backend devi specificare alcuni altri parametri, elencati di seguito.

Strategia di offerta

La strategia di offerta automatica definisce ciò che massimizza la campagna quando imposta offerte. Per Performance Max sono disponibili due strategie di offerta:

• Massimizza le conversioni: la campagna cerca di massimizzare il numero di conversioni ottenute (ad es. il numero di acquisti) per il budget specificato.

• Massimizza il valore di conversione (opzione consigliata): la campagna cerca di massimizzare il valore monetario totale delle conversioni (ad esempio, dollari spesi su acquisti) per il budget specificato, come lo hai definito come parte della conversione impostazione del monitoraggio.

Per semplificare la complessità tecnica e l'esperienza dei commercianti, ti consigliamo di selezionare "Massimizza il valore di conversione" per conto tuo commercianti, senza ROAS target. È coerente con quanto disponibile tramite l'opzione di reindirizzamento.

Gruppi di asset e gruppi di schede

I gruppi di asset sono gli elementi in cui vengono archiviati gli elementi creativi della campagna, come prodotti, immagini, video. Sono fondamentali solo i prodotti del Gli argomenti trattati sono Merchant Center. Di conseguenza, ti serve un solo gruppo di asset per che potrai creare nel backend per conto del commerciante.

I gruppi di schede consentono ai commercianti di suddividere i prodotti di una campagna in gruppi (ad es. per pubblicizzare solo prodotti specifici). Questa è una funzionalità avanzata non consigliato come pilastro fondamentale, ma ogni campagna deve avere al almeno un gruppo di schede. Di conseguenza, ti serve un solo gruppo di schede per che potrai creare nel backend per conto del commerciante.

Nota: il gruppo di asset sostituisce quello che viene chiamato gruppo di annunci in altri tipi di campagna ad es. le campagne Shopping. Un gruppo di schede sostituisce il cosiddetto un gruppo di prodotti nelle campagne Shopping intelligenti.

Indicazioni per l'esperienza utente

---

La prima parte di questa sezione illustra lo scenario di creazione della prima campagna nell'ambito del flusso di onboarding di Google Ads. La seconda parte descrive modalità di creazione di altre campagne. Ciò è particolarmente pertinente se consentono ai commercianti di applicare il targeting geografico alle loro campagne.

Creazione di una campagna durante l'onboarding di Google Ads

Dopo aver collegato l'account Google Ads, all'utente viene chiesto di configurare Campagna Performance Max:

• Il nome della campagna può essere precompilato con un nome significativo, ad esempio Campagna Performance Max per il nome del tuo store builder.

• Consigliamo anche di includere un'anteprima del possibile aspetto di un annuncio e un breve spiegazione del funzionamento delle campagne Performance Max. L'API Google Ads non offre un modo per generare un'anteprima dell'annuncio, pertanto è necessario implementare uno tu. Non c'è bisogno di rendere il pixel perfetto, dato che il design tipo di annuncio potrebbe cambiare.

• Se il commerciante è idoneo a ricevere un coupon, questo deve essere indicato nel richiesta.

• Assicurati di fornire anche un link alle norme degli annunci Shopping in questo momento il flusso.

• Se vuoi, puoi consentire al commerciante di impostare la campagna come target geografico.

di Gemini Advanced.

Suggerimento: è meglio includere solo i paesi di destinazione disponibili nella feed dei prodotti di Merchant Center.

Quando il commerciante arriva alla fase di configurazione della campagna, i due scenari possono essere:

1. La fatturazione non è configurata. Questo vale sempre quando un nuovo account Google Ads è stato creato nell'ambito di questo flusso.

2. La fatturazione per l'account Google Ads collegato (ad esempio, il commerciante ha riutilizzato un account Google Ads che aveva già utilizzato per pubblicare altri tipi di campagne).

Gli scenari di fatturazione non funzionanti dovrebbero essere già stati rilevati in Google Ads per collegare l'account. L'unica differenza tra gli scenari 1 e 2 è comportamento e invito all'azione dell'azione principale:

• Per lo scenario 1, l'invito all'azione deve essere chiamato "Configura la fatturazione" e aprirai il riquadro di fatturazione pop-up. Una volta che hai fornito i dati di fatturazione e il popup è stato chiuso, procedi con Rivedi e completa la configurazione passaggio.

• Per lo scenario 2, l'invito all'azione dovrebbe essere chiamato "continua" e procedi direttamente Rivedi e completa la configurazione passaggio.

Di seguito è riportato un esempio di come potrebbe presentarsi il passaggio di configurazione della campagna per lo scenario 1.

Al commerciante devono essere fornite ulteriori informazioni sul nome della campagna, prodotti inclusi e il budget. Di seguito trovi un esempio.

Se il commerciante inserisce un budget inferiore alla soglia consigliata per il paese pubblica gli annunci, invia una notifica con un consiglio sul budget minimo. Di seguito puoi trovare un suggerimento in merito.

Dopo aver completato il passaggio di configurazione della campagna e fornito i dati di fatturazione (se necessario), l'utente passa alla fase di "revisione e completamento" passaggio. L'utente di rivedere la configurazione della campagna un'ultima volta prima lanciare la campagna. L'interfaccia utente potrebbe avere un aspetto simile al seguente in questo passaggio:

Dopo l'uscita dal flusso di onboarding, consigliamo di presentare un'anteprima all'utente su cosa succederà dopo. Di seguito è riportato un esempio.

Una volta uscito dall'onboarding, il commerciante deve essere indirizzato a una panoramica . Di seguito trovi un esempio.

Campagne display e creazione di altre campagne

L'interfaccia utente deve essere in grado di mostrare più campagne, come potrebbero aver fatto i commercianti campagne Performance Max esistenti o se vuoi crearne più di una soprattutto se consenti il targeting geografico. Esempio di come consentire a un commerciante di il targeting geografico delle campagne è mostrato di seguito. Assicurati sempre che il targeting geografico è più ristretto rispetto al paese o ai paesi in cui il commerciante fa pubblicità.

Quando un commerciante ha più di una campagna, aggrega le metriche pubblicitarie su la pagina Panoramica. Di seguito trovi un esempio.

Elenca le singole campagne nella visualizzazione dei dettagli di Google Ads. Un esempio di come questo guarda è di seguito.

La visualizzazione dei dettagli di Google Ads è anche il punto di partenza suggerito per la creazione campagne aggiuntive. Un esempio di come potrebbe essere questo flusso è mostrato in animazione qui sotto. Tieni presente che l'animazione salta l'inserimento delle informazioni sul budget come illustrato in precedenza.

Consulenza tecnica

---

Una volta collegato l'account Google Ads all'account Merchant Center, Per creare la campagna Performance Max per la vendita al dettaglio:

1. Crea operazione budget
2. Operazione di creazione campagna
3. Crea criteri per la campagna
4. Crea gruppo di asset con filtro del gruppo di schede
5. Esegui l'override degli obiettivi di conversione
6. Invia tutte le operazioni insieme

Tieni presente che quanto segue si applica per la gestione delle campagne Performance Max:

• Devi utilizzare almeno la versione 9 dell'API Google Ads

• Devi inviare tutte le operazioni di modifica in un'unica richiesta di modifica. Pertanto, devi prima creare tutte le operazioni di modifica e poi inviarle tutte insieme in una singola richiesta di modifica all'API Google Ads.

• Utilizzi ID temporanei in tutte le operazioni che crei perché invii una singola richiesta di modifica con tutte le operazioni, che le usano ID temporanei per comunicare a Google che sono tutti associati.

Nome insieme

Se è possibile che i tuoi commercianti accedano alla piattaforma Google Ads ti consigliamo di fare più attenzione al nome della campagna, è evidente che tu, in qualità di partner, hai creato la campagna in modo programmatico. Questo segnalerà al commerciante che è meglio apportare modifiche alla campagna all'interno della tua piattaforma e non quella di Google Ads. Ad esempio, anche se consentire al commerciante di personalizzare il nome, ti consigliamo di anteporre o aggiungere "Creata dalla piattaforma X".

Suggerimento: esegui dei controlli per ridurre il rischio dei concetti fondamentali di Merchant Center e Google Ads che le applicazioni presentino problemi di prestazioni. Ciò aiuta il commerciante a ottenere risultati ottimali. Vedi sezione 4.5 Gestione degli errori.

Passaggio 1. Crea l'operazione di budget

L'esempio di codice si trova in Creare un budget della campagna. In questo caso, evidenziare i punti più importanti:

• Una campagna Performance Max richiede un budget, come tutte le altre campagne, ma con le seguenti restrizioni:

  • Il budget deve avere un periodo di budget GIORNALIERO.
  • Il budget non può essere condiviso.

• Il metodo di pubblicazione per il budget è Standard. La consegna standard prende in considerazione il rendimento degli annunci previsto nell'arco della giornata ed è migliore nel massimizzarlo senza superare il budget giornaliero medio.

• Come accennato in precedenza in questa sezione, devi utilizzare gli ID temporanei tutte le operazioni che crei. Pertanto, nell'esempio di codice vedi che _BUDGET_TEMPORARY_ID è impostato nel nome della risorsa del budget, quindi può essere a cui la campagna fa riferimento nei passaggi successivi.

Passaggio 2: Creare la campagna e la strategia di offerta

Puoi fare riferimento all'esempio di codice Crea la campagna e la strategia di offerta per scoprire come definire uno standard Campagna Performance Max. Ecco alcune note aggiuntive:

• L'esempio di codice utilizza Massimizza il valore di conversione per la strategia di offerta. che è ciò che consigliamo di usare nel pilastro Fondazione. Con Massimizza Valore di conversione, hai la possibilità di specificare un ROAS target (ritorno Spesa pubblicitaria). Anche se scegli di non specificare un valore per il ROAS target, deve essere impostato, a meno che non utilizzi Java. In Java sono disponibili: setMaximizeConversionValue(MaximizeConversionValue.newBuilder().build())

• Per le versioni future, puoi utilizzare Massimizza le conversioni come un'altra opzione di strategia di offerta, con la possibilità di impostare un CPA target.

• L'espansione dell'URL consente alla campagna di avere come target l'intero dominio, non solo gli URL specificati nel Merchant Center dell'inserzionista. Ti consigliamo di Utilizzano l'espansione dell'URL finale, in modo che la copertura della campagna non sia limitata e il rendimento. Questo significa che gli annunci possono essere pubblicati per qualsiasi sul sito web del commerciante.

• start_date e end_date sono facoltativi.

Per una campagna Performance Max per la vendita al dettaglio, devi anche creare una ShoppingSetting con i seguenti campi e aggiungilo alla campagna. Questa opzione indica quale account Merchant Center vuoi utilizzare e quali che vuoi utilizzare nell'account. Come descritto nella sezione Crea una campagna Performance Max per la vendita al dettaglio, che devi impostare. ShoppingSetting campi:

• merchant_id (obbligatorio): l'ID Merchant Center dell'account che contiene i prodotti da pubblicizzare.

• feed_label (potrebbe essere obbligatorio): se esiste la possibilità che tu abbia un commerciante utilizzando un account Merchant Center esistente con i vecchi feed dei prodotti, deve utilizzare feed_label per specificare che la campagna utilizzi il prodotto il feed che hai creato; questo viene mappato a DatafeedTarget nell'API Content.

Ecco un esempio dell'operazione per creare una campagna Performance Max per la vendita al dettaglio campagna e strategia di offerta. Questo presuppone che ci siano un feed dei prodotti nell'account Merchant Center (quello che gestisci), quindi non imposta feed_label.

Python
mutate_operation = googleads_client.get_type("MutateOperation")
campaign = mutate_operation.campaign_operation.create
campaign.name = f"Performance Max campaign #{uuid4()}"

campaign.status = googleads_client.enums.CampaignStatusEnum.ENABLED

campaign.advertising_channel_type = (       googleads_client.enums.AdvertisingChannelTypeEnum.PERFORMANCE_MAX
)

# Add Merchant Center ID to create a Performance Max for Retail
# campaign. This ID should be linked to the Ads account
# where you are creating the campaign
campaign.shopping_setting.merchant_id = int(google_merchant_id)
campaign.maximize_conversion_value.target_roas = None

# Set the Final URL expansion opt out. This option is specific to
# Performance Max campaigns. If opted out (True), only the
# final URLs in the asset group or URLs specified in the
# advertiser's Google Merchant Center or business data feeds are
# targeted.
# If opted in (False), the entire domain will be targeted.
# For best results, set this value to false to opt in and allow
# URL expansions. You can optionally add exclusions to limit
# traffic to parts of your website.
campaign.url_expansion_opt_out = False

# Assign the resource name with a temporary ID.
campaign_service = googleads_client.get_service("CampaignService")
campaign.resource_name = campaign_service.campaign_path(
       customer_id, _PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
)

# Set the budget using the given budget resource name.
campaign.campaign_budget = campaign_service.campaign_budget_path(
      customer_id, _BUDGET_TEMPORARY_ID
)

print("mutate_operation for step 2 - campaign and bidding strategy creation")
print(mutate_operation)

return mutate_operation

Passaggio 3: Creare i criteri della campagna

Puoi vedere l'esempio di codice in Creare i criteri della campagna, quindi qui sono i punti più importanti:

• Come illustrato nell'esempio di codice, devi prima avviare tutti i servizi necessari prima di procedere con la configurazione dei criteri della campagna LOCATION e LANGUAGE.

• Quando imposti i criteri della campagna LOCATION, puoi aggiungere target da escludere per località da escludere impostando campaign_criterion.negative su Vero.

• Assicurati di utilizzare lo stesso ID temporaneo del passaggio 2 per indicare a Google quale campagna che sta creando questo criterio.

Passaggio 4: Creare il gruppo di asset con il filtro del gruppo di schede

Come descritto in Creare gruppi di asset Performance Max, un gruppo di asset viene una raccolta di asset incentrata su un tema o correlata a un pubblico di destinazione. La gruppo di asset viene utilizzato per assemblare tutti gli annunci e creare un inventario per tutti formati dell'annuncio adatti al tuo obiettivo pubblicitario.

Puoi utilizzare i gruppi di schede Shopping per suddividere i prodotti in gruppi, includere un insieme di prodotti o escluderli. Ti permette di filtrare l'insieme prodotti idonei a essere visualizzati nella campagna.

Puoi visualizzare l'esempio di codice per creare più gruppi di schede di prodotto in gruppi di schede Performance Max, ma come pilastro della base è di configurare un'unica campagna che abbia come target tutte le prodotti di big data e machine learning. Di seguito è riportato un esempio di codice più semplice. Devi includere un parametro nodo principale AssetGroupListingGroupFilter contenente tutti i prodotti. Altrimenti, gli annunci non vengono pubblicati.

Python
googleads_service = googleads_client.get_service("GoogleAdsService")

operations = []

# Create the AssetGroup
mutate_operation = googleads_client.get_type("MutateOperation")
asset_group = mutate_operation.asset_group_operation.create
asset_group.name = f"Performance Max asset group #{uuid4()}"
asset_group.campaign = googleads_service.campaign_path(
       customer_id, _PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
)

asset_group.status = googleads_client.enums.AssetGroupStatusEnum.ENABLED
asset_group.resource_name = googleads_service.asset_group_path(
      customer_id,
      _ASSET_GROUP_TEMPORARY_ID,
)
operations.append(mutate_operation)

# Create a listing group and link it to the AssetGroup.
# The way you link a listing group to an AssetGroup is different
# than when you are linking headlines, descriptions, images, etc
# where you set the field_type of the asset_group_asset as HEADLINE, for example.
# https://developers.google.com/google-ads/api/reference/rpc/v13/AssetGroupListingGroupFilter
mutate_operation = googleads_client.get_type("MutateOperation")
asset_group_listing_group = mutate_operation.asset_group_listing_group_filter_operation.create
asset_group_listing_group.asset_group = googleads_service.asset_group_path(
       customer_id,
       _ASSET_GROUP_TEMPORARY_ID,
)

asset_group_listing_group.type_ = googleads_client.enums.ListingGroupFilterTypeEnum.UNIT_INCLUDED
# here are other options for ListingGroupFilterTypeEnum
# https://developers.google.com/google-ads/api/reference/rpc/v13/ListingGroupFilterTypeEnum.ListingGroupFilterType

asset_group_listing_group.vertical = googleads_client.enums.ListingGroupFilterVerticalEnum.SHOPPING

operations.append(mutate_operation)

print("mutate_operation for step 4 - create asset group and product group attached to that asset group")
print(operations)

return operations

Puoi aggiungere titoli, descrizioni e persino immagini al gruppo di asset per migliorare il rendimento delle campagne. Tuttavia, poiché questo non è un requisito per Performance Max per la vendita al dettaglio, lo sconsigliato per le funzionalità di base.

Passaggio 5: Sovrascrivi gli obiettivi di conversione

Come indicato nella sezione Monitoraggio delle conversioni, se consenti ai commercianti di utilizzare un account Google Ads esistente, ti consigliamo vivamente di imposti gli obiettivi di conversione a livello di campagna. Per farlo, basta eseguire l'override gli obiettivi di conversione a livello di cliente o di account. Se non a livello di campagna l'obiettivo di conversione è impostato, per impostazione predefinita la campagna utilizza la conversione a livello di cliente obiettivo.

Un esempio di codice è disponibile in Aggiornamento degli obiettivi di conversione della campagna. Per prima cosa, devi ottenere gli obiettivi di conversione dell'account. Puoi quindi ripetere obiettivi di conversione e verificare se ogni obiettivo è incrementare le vendite online, ovvero categoria PURCHASE, SITE di origine). In caso contrario, imposta l'offerta su False. Se imposta l'offerta su True. In questo modo, la campagna Performance Max è ottimizzato per aumentare le vendite online.

Passaggio 6: Invia tutte le operazioni di modifica insieme

Infine, devi inviare tutte le operazioni di modifica insieme. Come mostrato nel codice esempio qui sotto, l'ordine delle operazioni è importante, in quanto dipendono e l'altro. Ad esempio, performance_max_campaign_operation utilizza i dati di campaign_budget_operation e campaign_criterion_operations utilizzano i dati di performance_max_campaign_operation.

Python
ga_service = googleads_client.get_service("GoogleAdsService")
response = ga_service.mutate(
   customer_id=customer_id,
   mutate_operations=[
       # It's important to create the entities in this order
       # because they depend on each other
       campaign_budget_operation,       # Step 1
       performance_max_campaign_operation,  # Step 2
       # Expand the list of multiple operations into the list of
       # other mutate operations
       *campaign_criterion_operations,  # Step 3
       *asset_group_operations,             # Step 4
       *conversion_goal_operations,         # Step 5
   ],
)

Dopo aver creato correttamente la campagna, l'API restituisce un risultato simile al seguente:

Python
mutate_operation_responses {
campaign_budget_result {
resource_name: "customers/7244690427/campaignBudgets/10689184019"
}
}
mutate_operation_responses {
campaign_result {
    resource_name: "customers/7244690427/campaigns/16822128600"
}
}
mutate_operation_responses {
campaign_criterion_result {
        resource_name: "customers/7244690427/campaignCriteria/16822128600~20009"
}
}
mutate_operation_responses {
    campaign_criterion_result {
resource_name: "customers/7244690427/campaignCriteria/16822128600~20024"
    }
}
mutate_operation_responses {
campaign_criterion_result {
        resource_name: "customers/7244690427/campaignCriteria/16822128600~1003"
    }
}
mutate_operation_responses {
asset_group_result {
        resource_name: "customers/7244690427/assetGroups/6444254998"
    }
}
mutate_operation_responses {
asset_group_listing_group_filter_result {
    resource_name: "customers/7244690427/assetGroupListingGroupFilters/6444254998~6454725458"
}
}
mutate_operation_responses {
campaign_conversion_goal_result {
    resource_name: "customers/7244690427/campaignConversionGoals/16822128600~PURCHASE~WEBSITE"
}
}

Salva il resource_name della campagna e del budget perché ne hai bisogno quando la modifica delle impostazioni della campagna e per la generazione di report.

Riassumendo: Puoi trovare esempi di codice completi per la creazione di una campagna Performance Max per la vendita al dettaglio nella sezione Esempi di codice della documentazione dell'API Google Ads. Tieni presente che questi esempi potrebbero includere istruzioni per implementare funzionalità aggiuntive rispetto a quelle consigliate nel pilastro di base, tra cui l'aggiunta di ulteriori asset titolo e immagine.

Java

// Copyright 2021 Google LLC
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     https://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package com.google.ads.googleads.examples.shoppingads;

import static com.google.ads.googleads.examples.utils.CodeSampleHelper.getPrintableDateTime;

import com.beust.jcommander.Parameter;
import com.google.ads.googleads.examples.utils.ArgumentNames;
import com.google.ads.googleads.examples.utils.CodeSampleParams;
import com.google.ads.googleads.lib.GoogleAdsClient;
import com.google.ads.googleads.lib.utils.FieldMasks;
import com.google.ads.googleads.v17.common.ImageAsset;
import com.google.ads.googleads.v17.common.LanguageInfo;
import com.google.ads.googleads.v17.common.LocationInfo;
import com.google.ads.googleads.v17.common.MaximizeConversionValue;
import com.google.ads.googleads.v17.common.TextAsset;
import com.google.ads.googleads.v17.enums.AdvertisingChannelTypeEnum.AdvertisingChannelType;
import com.google.ads.googleads.v17.enums.AssetFieldTypeEnum.AssetFieldType;
import com.google.ads.googleads.v17.enums.AssetGroupStatusEnum.AssetGroupStatus;
import com.google.ads.googleads.v17.enums.BudgetDeliveryMethodEnum.BudgetDeliveryMethod;
import com.google.ads.googleads.v17.enums.CampaignStatusEnum.CampaignStatus;
import com.google.ads.googleads.v17.enums.ConversionActionCategoryEnum.ConversionActionCategory;
import com.google.ads.googleads.v17.enums.ConversionOriginEnum.ConversionOrigin;
import com.google.ads.googleads.v17.enums.ListingGroupFilterListingSourceEnum.ListingGroupFilterListingSource;
import com.google.ads.googleads.v17.enums.ListingGroupFilterTypeEnum.ListingGroupFilterType;
import com.google.ads.googleads.v17.errors.GoogleAdsError;
import com.google.ads.googleads.v17.errors.GoogleAdsException;
import com.google.ads.googleads.v17.resources.Asset;
import com.google.ads.googleads.v17.resources.AssetGroup;
import com.google.ads.googleads.v17.resources.AssetGroupAsset;
import com.google.ads.googleads.v17.resources.AssetGroupListingGroupFilter;
import com.google.ads.googleads.v17.resources.Campaign;
import com.google.ads.googleads.v17.resources.Campaign.ShoppingSetting;
import com.google.ads.googleads.v17.resources.CampaignBudget;
import com.google.ads.googleads.v17.resources.CampaignConversionGoal;
import com.google.ads.googleads.v17.resources.CampaignCriterion;
import com.google.ads.googleads.v17.resources.CustomerConversionGoal;
import com.google.ads.googleads.v17.services.AssetGroupAssetOperation;
import com.google.ads.googleads.v17.services.AssetGroupListingGroupFilterOperation;
import com.google.ads.googleads.v17.services.AssetGroupOperation;
import com.google.ads.googleads.v17.services.AssetOperation;
import com.google.ads.googleads.v17.services.CampaignBudgetOperation;
import com.google.ads.googleads.v17.services.CampaignConversionGoalOperation;
import com.google.ads.googleads.v17.services.CampaignCriterionOperation;
import com.google.ads.googleads.v17.services.CampaignOperation;
import com.google.ads.googleads.v17.services.GoogleAdsRow;
import com.google.ads.googleads.v17.services.GoogleAdsServiceClient;
import com.google.ads.googleads.v17.services.GoogleAdsServiceClient.SearchPagedResponse;
import com.google.ads.googleads.v17.services.MutateGoogleAdsResponse;
import com.google.ads.googleads.v17.services.MutateOperation;
import com.google.ads.googleads.v17.services.MutateOperationResponse;
import com.google.ads.googleads.v17.utils.ResourceNames;
import com.google.common.collect.ImmutableList;
import com.google.common.io.ByteStreams;
import com.google.protobuf.ByteString;
import com.google.protobuf.Descriptors.FieldDescriptor;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.net.URL;
import java.util.ArrayList;
import java.util.List;
import java.util.Map.Entry;
import java.util.stream.Collectors;
import org.joda.time.DateTime;

/**
 * This example shows how to create a Performance Max retail campaign.
 *
 * <p>This will be created for "All products".
 *
 * <p>For more information about Performance Max retail campaigns, see
 * https://developers.google.com/google-ads/api/docs/performance-max/retail
 *
 * <p>Prerequisites: - You need to have access to a Merchant Center account. You can find
 * instructions to create a Merchant Center account here:
 * https://support.google.com/merchants/answer/188924. This account must be linked to your Google
 * Ads account. The integration instructions can be found at:
 * https://developers.google.com/google-ads/api/docs/shopping-ads/merchant-center - You need your
 * Google Ads account to track conversions. The different ways to track conversions can be found
 * here: https://support.google.com/google-ads/answer/1722054. - You must have at least one
 * conversion action in the account. For more about conversion actions, see
 * https://developers.google.com/google-ads/api/docs/conversions/overview#conversion_actions
 */
public class AddPerformanceMaxRetailCampaign {

  // We specify temporary IDs that are specific to a single mutate request. Temporary IDs are always
  // negative and unique within one mutate request.
  //
  // <p>See https://developers.google.com/google-ads/api/docs/mutating/best-practices for further
  // details.
  //
  // <p>These temporary IDs are fixed because they are used in multiple places.
  private static final int BUDGET_TEMPORARY_ID = -1;
  private static final int PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID = -2;
  private static final int ASSET_GROUP_TEMPORARY_ID = -3;

  // There are also entities that will be created in the same request but do not
  // need to be fixed temporary IDs because they are referenced only once.
  private static long temporaryId = ASSET_GROUP_TEMPORARY_ID - 1;

  private static class AddPerformanceMaxRetailCampaignParams extends CodeSampleParams {

    @Parameter(names = ArgumentNames.CUSTOMER_ID, required = true)
    private Long customerId;

    @Parameter(
        names = ArgumentNames.MERCHANT_CENTER_ACCOUNT_ID,
        required = true,
        description = "The Merchant Center account ID.")
    private long merchantCenterAccountId;

    @Parameter(
        names = ArgumentNames.SALES_COUNTRY,
        description = "The sales country of products to include in the campaign.")
    private String salesCountry = "US";

    @Parameter(
        names = ArgumentNames.FINAL_URL,
        required = true,
        description =
            "The final url for the generated ads. Must have the same domain as the Merchant Center"
                + " account.")
    private String finalUrl;
  }

  public static void main(String[] args) throws IOException {
    AddPerformanceMaxRetailCampaignParams params = new AddPerformanceMaxRetailCampaignParams();
    if (!params.parseArguments(args)) {

      // Either pass the required parameters for this example on the command line, or insert them
      // into the code here. See the parameter class definition above for descriptions.
      params.customerId = Long.parseLong("INSERT_CUSTOMER_ID_HERE");
      params.merchantCenterAccountId = Long.parseLong("INSERT_MERCHANT_CENTER_ACCOUNT_ID_HERE");
      params.finalUrl = "INSERT_FINAL_URL_HERE";

      // Optionally set the sales country.
      // params.salesCountry = "INSERT_SALES_COUNTRY_HERE";
    }

    GoogleAdsClient googleAdsClient = null;
    try {
      googleAdsClient = GoogleAdsClient.newBuilder().fromPropertiesFile().build();
    } catch (FileNotFoundException fnfe) {
      System.err.printf(
          "Failed to load GoogleAdsClient configuration from file. Exception: %s%n", fnfe);
      System.exit(1);
    } catch (IOException ioe) {
      System.err.printf("Failed to create GoogleAdsClient. Exception: %s%n", ioe);
      System.exit(1);
    }

    try {
      new AddPerformanceMaxRetailCampaign()
          .runExample(
              googleAdsClient,
              params.customerId,
              params.merchantCenterAccountId,
              params.salesCountry,
              params.finalUrl);
    } catch (GoogleAdsException gae) {
      // GoogleAdsException is the base class for most exceptions thrown by an API request.
      // Instances of this exception have a message and a GoogleAdsFailure that contains a
      // collection of GoogleAdsErrors that indicate the underlying causes of the
      // GoogleAdsException.
      System.err.printf(
          "Request ID %s failed due to GoogleAdsException. Underlying errors:%n",
          gae.getRequestId());
      int i = 0;
      for (GoogleAdsError googleAdsError : gae.getGoogleAdsFailure().getErrorsList()) {
        System.err.printf("  Error %d: %s%n", i++, googleAdsError);
      }
      System.exit(1);
    }
  }

  /**
   * Runs the example.
   *
   * @param googleAdsClient the Google Ads API client.
   * @param customerId the client customer ID.
   * @param merchantCenterAccountId the Merchant Center account ID.
   * @param salesCountry sales country of products to include in the campaign.
   * @param finalUrl final URL for the asset group of the campaign.
   */
  private void runExample(
      GoogleAdsClient googleAdsClient,
      long customerId,
      long merchantCenterAccountId,
      String salesCountry,
      String finalUrl)
      throws IOException {
    // This campaign will override the customer conversion goals. For more information see
    // https://developers.google.com/google-ads/api/docs/conversions/goals/campaign-goals.
    // Retrieve the current list of customer conversion goals.
    List<CustomerConversionGoal> customerConversionGoals =
        getCustomerConversionGoals(googleAdsClient, customerId);

    // Performance Max campaigns require that repeated assets such as headlines
    // and descriptions be created before the campaign.
    // For the list of required assets for a Performance Max campaign, see
    // https://developers.google.com/google-ads/api/docs/performance-max/assets
    //
    // Creates the headlines.
    List<String> headlines = ImmutableList.of("Travel", "Travel Reviews", "Book travel");
    List<String> headlineAssetResourceNames =
        createMultipleTextAssets(googleAdsClient, customerId, headlines);
    // Creates the descriptions.
    List<String> descriptions = ImmutableList.of("Take to the air!", "Fly to the sky!");
    List<String> descriptionAssetResourceNames =
        createMultipleTextAssets(googleAdsClient, customerId, descriptions);

    // The below methods create and return MutateOperations that we later
    // provide to the GoogleAdsService.Mutate method in order to create the
    // entities in a single request. Since the entities for a Performance Max
    // campaign are closely tied to one-another, it's considered a best practice
    // to create them in a single Mutate request, so they all complete
    // successfully or fail entirely, leaving no orphaned entities. See:
    // https://developers.google.com/google-ads/api/docs/mutating/overview
    List<MutateOperation> mutateOperations = new ArrayList<>();
    mutateOperations.add(createCampaignBudgetOperation(customerId));
    mutateOperations.add(
        createPerformanceMaxCampaignOperation(customerId, merchantCenterAccountId, salesCountry));
    mutateOperations.addAll(createCampaignCriterionOperations(customerId));
    String assetGroupResourceName = ResourceNames.assetGroup(customerId, ASSET_GROUP_TEMPORARY_ID);
    mutateOperations.add(createAssetGroupOperation(customerId, assetGroupResourceName, finalUrl));
    // Retail Performance Max campaigns require listing groups, which are created via the
    // AssetGroupListingGroupFilter resource.
    mutateOperations.add(createAssetGroupListingGroupFilterOperation(assetGroupResourceName));
    mutateOperations.addAll(
        createAssetAndAssetGroupAssetOperations(
            customerId,
            assetGroupResourceName,
            headlineAssetResourceNames,
            descriptionAssetResourceNames));
    mutateOperations.addAll(createConversionGoalOperations(customerId, customerConversionGoals));

    try (GoogleAdsServiceClient googleAdsServiceClient =
        googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
      MutateGoogleAdsResponse response =
          googleAdsServiceClient.mutate(Long.toString(customerId), mutateOperations);
      printResponseDetails(response);
    }
  }

  /** Creates a MutateOperation that creates a new CampaignBudget. */
  private MutateOperation createCampaignBudgetOperation(long customerId) {
    CampaignBudget campaignBudget =
        CampaignBudget.newBuilder()
            .setName("Performance Max retail campaign budget #" + getPrintableDateTime())
            // The budget period already defaults to DAILY.
            .setAmountMicros(50_000_000)
            .setDeliveryMethod(BudgetDeliveryMethod.STANDARD)
            // A Performance Max campaign cannot use a shared campaign budget.
            .setExplicitlyShared(false)
            // Set a temporary ID in the budget's resource name, so it can be referenced
            // by the campaign in later steps.
            .setResourceName(ResourceNames.campaignBudget(customerId, BUDGET_TEMPORARY_ID))
            .build();

    return MutateOperation.newBuilder()
        .setCampaignBudgetOperation(
            CampaignBudgetOperation.newBuilder().setCreate(campaignBudget).build())
        .build();
  }


  /** Creates a MutateOperation that creates a new Performance Max campaign. */
  private MutateOperation createPerformanceMaxCampaignOperation(
      long customerId, long merchantCenterAccountId, String salesCountry) {
    Campaign performanceMaxCampaign =
        Campaign.newBuilder()
            .setName("Performance Max retail campaign #" + getPrintableDateTime())
            // Sets the campaign status as PAUSED. The campaign is the only entity in
            // the mutate request that should have its status set.
            .setStatus(CampaignStatus.PAUSED)
            // All Performance Max campaigns have an advertising_channel_type of
            // PERFORMANCE_MAX. The advertising_channel_sub_type should not be set.
            .setAdvertisingChannelType(AdvertisingChannelType.PERFORMANCE_MAX)
            // Bidding strategy must be set directly on the campaign.
            // Setting a portfolio bidding strategy by resource name is not supported.
            // Max Conversion and Maximize Conversion Value are the only strategies
            // supported for Performance Max campaigns.
            // An optional ROAS (Return on Advertising Spend) can be set for
            // maximize_conversion_value. The ROAS value must be specified as a ratio in
            // the API. It is calculated by dividing "total value" by "total spend".
            // For more information on Maximize Conversion Value, see the support
            // article: http://support.google.com/google-ads/answer/7684216.
            // A targetRoas of 3.5 corresponds to a 350% return on ad spend.
            // For first time users, it's recommended not to set a target ROAS value. Although
            // the target ROAS value is optional, you still need to define the enclosing
            // maximize_conversion_value.
            .setMaximizeConversionValue(
                MaximizeConversionValue.newBuilder()
                    // .setTargetRoas(3.5)
                    .build())
            // Below is what you would use if you want to maximize conversions:
            // .setMaximizeConversions(
            //     MaximizeConversions.newBuilder()
            //         // The target CPA is optional. This is the average amount that you would like
            //         // to spend per conversion action.
            //         // .setTargetCpaMicros(1_000_000)
            //         .build())
            // Sets the shopping settings.
            .setShoppingSetting(
                ShoppingSetting.newBuilder()
                    .setMerchantId(merchantCenterAccountId)
                    // Optional: To use products only from a specific feed, set FeedLabel to the
                    // feed label used in Merchant Center. See:
                    // https://support.google.com/merchants/answer/12453549.
                    // Removing the feedLabel field will use products from all feeds.
                    // .setFeedLabel("INSERT_FEED_LABEL_HERE")
                    .build())
            // Sets the Final URL expansion opt out. This flag is specific to
            // Performance Max campaigns. If opted out (true), only the final URLs in
            // the asset group or URLs specified in the advertiser's Google Merchant
            // Center or business data feeds are targeted.
            //
            // If opted in (false), the entire domain will be targeted. For best
            // results, set this value to false to opt in and allow URL expansions. You
            // can optionally add exclusions to limit traffic to parts of your website.
            //
            // Sets to true for this Retail campaign so the final URLs will be limited to those
            // explicitly surfaced via Google Merchant Center.
            .setUrlExpansionOptOut(true)
            // Assigns the resource name with a temporary ID.
            .setResourceName(
                ResourceNames.campaign(customerId, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID))
            // Sets the budget using the given budget resource name.
            .setCampaignBudget(ResourceNames.campaignBudget(customerId, BUDGET_TEMPORARY_ID))
            // Optional fields.
            .setStartDate(new DateTime().plusDays(1).toString("yyyyMMdd"))
            .setEndDate(new DateTime().plusDays(365).toString("yyyyMMdd"))
            .build();

    return MutateOperation.newBuilder()
        .setCampaignOperation(
            CampaignOperation.newBuilder().setCreate(performanceMaxCampaign).build())
        .build();
  }


  /** Creates a list of MutateOperations that create new campaign criteria. */
  private List<MutateOperation> createCampaignCriterionOperations(long customerId) {
    String campaignResourceName =
        ResourceNames.campaign(customerId, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID);
    List<CampaignCriterion> campaignCriteria = new ArrayList<>();
    // Sets the LOCATION campaign criteria.
    // Targets all of New York City except Brooklyn.
    // Location IDs are listed here:
    // https://developers.google.com/google-ads/api/reference/data/geotargets
    // and they can also be retrieved using the GeoTargetConstantService as shown
    // here: https://developers.google.com/google-ads/api/docs/targeting/location-targeting
    campaignCriteria.add(
        CampaignCriterion.newBuilder()
            .setCampaign(campaignResourceName)
            // Adds one positive location target for New York City (ID=1023191), specifically adding
            // the positive criteria before the negative one.
            .setLocation(
                LocationInfo.newBuilder()
                    .setGeoTargetConstant(ResourceNames.geoTargetConstant(1023191))
                    .build())
            .setNegative(false)
            .build());
    // Next adds the negative target for Brooklyn (ID=1022762).
    campaignCriteria.add(
        CampaignCriterion.newBuilder()
            .setCampaign(campaignResourceName)
            .setLocation(
                LocationInfo.newBuilder()
                    .setGeoTargetConstant(ResourceNames.geoTargetConstant(1022762))
                    .build())
            .setNegative(true)
            .build());
    // Sets the LANGUAGE campaign criterion.
    campaignCriteria.add(
        CampaignCriterion.newBuilder()
            .setCampaign(campaignResourceName)
            // Sets the language.
            // For a list of all language codes, see:
            // https://developers.google.com/google-ads/api/reference/data/codes-formats#expandable-7
            .setLanguage(
                LanguageInfo.newBuilder()
                    .setLanguageConstant(ResourceNames.languageConstant(1000)) // English
                    .build())
            .build());
    // Returns a list of mutate operations with one operation per criterion.
    return campaignCriteria.stream()
        .map(
            criterion ->
                MutateOperation.newBuilder()
                    .setCampaignCriterionOperation(
                        CampaignCriterionOperation.newBuilder().setCreate(criterion).build())
                    .build())
        .collect(Collectors.toList());
  }


  /**
   * Creates multiple text assets and returns the list of resource names.
   *
   * <p>These repeated assets must be created in a separate request prior to creating the campaign.
   */
  private List<String> createMultipleTextAssets(
      GoogleAdsClient googleAdsClient, long customerId, List<String> texts) {
    List<MutateOperation> mutateOperations = new ArrayList<>();
    for (String text : texts) {
      Asset asset = Asset.newBuilder().setTextAsset(TextAsset.newBuilder().setText(text)).build();
      AssetOperation assetOperation = AssetOperation.newBuilder().setCreate(asset).build();
      mutateOperations.add(MutateOperation.newBuilder().setAssetOperation(assetOperation).build());
    }

    List<String> assetResourceNames = new ArrayList<>();
    // Creates the service client.
    try (GoogleAdsServiceClient googleAdsServiceClient =
        googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
      // Sends the operations in a single Mutate request.
      MutateGoogleAdsResponse response =
          googleAdsServiceClient.mutate(Long.toString(customerId), mutateOperations);
      for (MutateOperationResponse result : response.getMutateOperationResponsesList()) {
        if (result.hasAssetResult()) {
          assetResourceNames.add(result.getAssetResult().getResourceName());
        }
      }
      printResponseDetails(response);
    }
    return assetResourceNames;
  }


  /** Creates a MutateOperation that create a new AssetGroup. */
  private MutateOperation createAssetGroupOperation(
      long customerId, String assetGroupResourceName, String finalUrl) {
    List<MutateOperation> mutateOperations = new ArrayList<>();
    String campaignResourceName =
        ResourceNames.campaign(customerId, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID);
    // Creates the AssetGroup.
    AssetGroup assetGroup =
        AssetGroup.newBuilder()
            .setName("Performance Max retail asset group #" + getPrintableDateTime())
            .setCampaign(campaignResourceName)
            .addFinalUrls(finalUrl)
            .addFinalMobileUrls(finalUrl)
            .setStatus(AssetGroupStatus.PAUSED)
            .setResourceName(assetGroupResourceName)
            .build();
    AssetGroupOperation assetGroupOperation =
        AssetGroupOperation.newBuilder().setCreate(assetGroup).build();
    return MutateOperation.newBuilder().setAssetGroupOperation(assetGroupOperation).build();
  }


  /** Creates a list of MutateOperations that create a new AssetGroup. */
  private List<MutateOperation> createAssetAndAssetGroupAssetOperations(
      long customerId,
      String assetGroupResourceName,
      List<String> headlineAssetResourceNames,
      List<String> descriptionAssetResourceNames)
      throws IOException {
    List<MutateOperation> mutateOperations = new ArrayList<>();

    // For the list of required assets for a Performance Max campaign, see
    // https://developers.google.com/google-ads/api/docs/performance-max/assets

    // An AssetGroup is linked to an Asset by creating a new AssetGroupAsset
    // and providing:
    //   the resource name of the AssetGroup
    //   the resource name of the Asset
    //   the field_type of the Asset in this AssetGroup.

    // To learn more about AssetGroups, see
    // https://developers.google.com/google-ads/api/docs/performance-max/asset-groups

    // Links the previously created multiple text assets.

    // Links the headline assets.
    for (String resourceName : headlineAssetResourceNames) {
      AssetGroupAsset assetGroupAsset =
          AssetGroupAsset.newBuilder()
              .setFieldType(AssetFieldType.HEADLINE)
              .setAssetGroup(assetGroupResourceName)
              .setAsset(resourceName)
              .build();
      AssetGroupAssetOperation assetGroupAssetOperation =
          AssetGroupAssetOperation.newBuilder().setCreate(assetGroupAsset).build();
      mutateOperations.add(
          MutateOperation.newBuilder()
              .setAssetGroupAssetOperation(assetGroupAssetOperation)
              .build());
    }

    // Links the description assets.
    for (String resourceName : descriptionAssetResourceNames) {
      AssetGroupAsset assetGroupAsset =
          AssetGroupAsset.newBuilder()
              .setFieldType(AssetFieldType.DESCRIPTION)
              .setAssetGroup(assetGroupResourceName)
              .setAsset(resourceName)
              .build();
      AssetGroupAssetOperation assetGroupAssetOperation =
          AssetGroupAssetOperation.newBuilder().setCreate(assetGroupAsset).build();
      mutateOperations.add(
          MutateOperation.newBuilder()
              .setAssetGroupAssetOperation(assetGroupAssetOperation)
              .build());
    }

    // Creates and links the long headline text asset.
    mutateOperations.addAll(
        createAndLinkTextAsset(
            customerId, assetGroupResourceName, "Travel the World", AssetFieldType.LONG_HEADLINE));

    // Creates and links the business name text asset.
    mutateOperations.addAll(
        createAndLinkTextAsset(
            customerId,
            assetGroupResourceName,
            "Interplanetary Cruises",
            AssetFieldType.BUSINESS_NAME));

    // Creates and links the image assets.

    // Creates and links the Logo Asset.
    mutateOperations.addAll(
        createAndLinkImageAsset(
            customerId,
            assetGroupResourceName,
            "https://gaagl.page.link/1Crm",
            AssetFieldType.LOGO,
            "Logo Image"));

    // Creates and links the Marketing Image Asset.
    mutateOperations.addAll(
        createAndLinkImageAsset(
            customerId,
            assetGroupResourceName,
            "https://gaagl.page.link/Eit5",
            AssetFieldType.MARKETING_IMAGE,
            "Marketing Image"));

    // Creates and links the Square Marketing Image Asset.
    mutateOperations.addAll(
        createAndLinkImageAsset(
            customerId,
            assetGroupResourceName,
            "https://gaagl.page.link/bjYi",
            AssetFieldType.SQUARE_MARKETING_IMAGE,
            "Square Marketing Image"));

    return sortAssetAndAssetGroupAssetOperations(mutateOperations);
  }


  /** Creates a list of MutateOperations that create a new linked text asset. */
  List<MutateOperation> createAndLinkTextAsset(
      long customerId, String assetGroupResourceName, String text, AssetFieldType assetFieldType) {
    List<MutateOperation> mutateOperations = new ArrayList<>();
    String assetResourceName = ResourceNames.asset(customerId, getNextTemporaryId());
    // Creates the Text Asset.
    Asset asset =
        Asset.newBuilder()
            .setResourceName(assetResourceName)
            .setTextAsset(TextAsset.newBuilder().setText(text).build())
            .build();
    AssetOperation assetOperation = AssetOperation.newBuilder().setCreate(asset).build();
    mutateOperations.add(MutateOperation.newBuilder().setAssetOperation(assetOperation).build());

    // Creates an AssetGroupAsset to link the Asset to the AssetGroup.
    AssetGroupAsset assetGroupAsset =
        AssetGroupAsset.newBuilder()
            .setFieldType(assetFieldType)
            .setAssetGroup(assetGroupResourceName)
            .setAsset(assetResourceName)
            .build();
    AssetGroupAssetOperation assetGroupAssetOperation =
        AssetGroupAssetOperation.newBuilder().setCreate(assetGroupAsset).build();
    mutateOperations.add(
        MutateOperation.newBuilder().setAssetGroupAssetOperation(assetGroupAssetOperation).build());

    return mutateOperations;
  }


  /** Creates a list of MutateOperations that create a new linked image asset. */
  List<MutateOperation> createAndLinkImageAsset(
      long customerId,
      String assetGroupResourceName,
      String url,
      AssetFieldType assetFieldType,
      String assetName)
      throws IOException {
    List<MutateOperation> mutateOperations = new ArrayList<>();
    String assetResourceName = ResourceNames.asset(customerId, getNextTemporaryId());
    // Creates a media file.
    byte[] assetBytes = ByteStreams.toByteArray(new URL(url).openStream());

    // Creates the Image Asset.
    Asset asset =
        Asset.newBuilder()
            .setResourceName(assetResourceName)
            .setImageAsset(ImageAsset.newBuilder().setData(ByteString.copyFrom(assetBytes)).build())
            // Provides a unique friendly name to identify your asset. When there is an existing
            // image asset with the same content but a different name, the new name will be dropped
            // silently.
            .setName(assetName)
            .build();
    AssetOperation assetOperation = AssetOperation.newBuilder().setCreate(asset).build();
    mutateOperations.add(MutateOperation.newBuilder().setAssetOperation(assetOperation).build());

    // Creates an AssetGroupAsset to link the Asset to the AssetGroup.
    AssetGroupAsset assetGroupAsset =
        AssetGroupAsset.newBuilder()
            .setFieldType(assetFieldType)
            .setAssetGroup(assetGroupResourceName)
            .setAsset(assetResourceName)
            .build();
    AssetGroupAssetOperation assetGroupAssetOperation =
        AssetGroupAssetOperation.newBuilder().setCreate(assetGroupAsset).build();
    mutateOperations.add(
        MutateOperation.newBuilder().setAssetGroupAssetOperation(assetGroupAssetOperation).build());

    return mutateOperations;
  }


  /**
   * Sorts a list of asset and asset group asset operations.
   *
   * <p>This sorts the list such that all asset operations precede all asset group asset operations.
   * If asset group assets are created before assets then an error will be returned by the API.
   */
  private List<MutateOperation> sortAssetAndAssetGroupAssetOperations(
      List<MutateOperation> operations) {
    List<MutateOperation> sortedOperations =
        operations.stream().filter(o -> o.hasAssetOperation()).collect(Collectors.toList());
    sortedOperations.addAll(
        operations.stream()
            .filter(o -> o.hasAssetGroupAssetOperation())
            .collect(Collectors.toList()));
    return sortedOperations;
  }


  /** Retrieves the list of customer conversion goals. */
  private static List<CustomerConversionGoal> getCustomerConversionGoals(
      GoogleAdsClient googleAdsClient, long customerId) {
    String query =
        "SELECT customer_conversion_goal.category, customer_conversion_goal.origin "
            + "FROM customer_conversion_goal";

    List<CustomerConversionGoal> customerConversionGoals = new ArrayList<>();
    try (GoogleAdsServiceClient googleAdsServiceClient =
        googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
      // The number of conversion goals is typically less than 50, so we use
      // GoogleAdsService.search instead of search_stream.
      SearchPagedResponse response =
          googleAdsServiceClient.search(Long.toString(customerId), query);
      for (GoogleAdsRow googleAdsRow : response.iterateAll()) {
        customerConversionGoals.add(googleAdsRow.getCustomerConversionGoal());
      }
    }

    return customerConversionGoals;
  }

  /** Creates a list of MutateOperations that override customer conversion goals. */
  private static List<MutateOperation> createConversionGoalOperations(
      long customerId, List<CustomerConversionGoal> customerConversionGoals) {
    List<MutateOperation> mutateOperations = new ArrayList<>();
    // To override the customer conversion goals, we will change the
    // biddability of each of the customer conversion goals so that only
    // the desired conversion goal is biddable in this campaign.
    for (CustomerConversionGoal customerConversionGoal : customerConversionGoals) {
      ConversionActionCategory category = customerConversionGoal.getCategory();
      ConversionOrigin origin = customerConversionGoal.getOrigin();
      String campaignConversionGoalResourceName =
          ResourceNames.campaignConversionGoal(
              customerId, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID, category, origin);
      CampaignConversionGoal.Builder campaignConversionGoalBuilder =
          CampaignConversionGoal.newBuilder().setResourceName(campaignConversionGoalResourceName);
      // Change the biddability for the campaign conversion goal.
      // Set biddability to True for the desired (category, origin).
      // Set biddability to False for all other conversion goals.
      // Note:
      //  1- It is assumed that this Conversion Action
      //     (category=PURCHASE, origin=WEBSITE) exists in this account.
      //  2- More than one goal can be biddable if desired. This example
      //     shows only one.
      if (category == ConversionActionCategory.PURCHASE && origin == ConversionOrigin.WEBSITE) {
        campaignConversionGoalBuilder.setBiddable(true);
      } else {
        campaignConversionGoalBuilder.setBiddable(false);
      }
      CampaignConversionGoal campaignConversionGoal = campaignConversionGoalBuilder.build();
      CampaignConversionGoalOperation campaignConversionGoalOperation =
          CampaignConversionGoalOperation.newBuilder()
              .setUpdate(campaignConversionGoal)
              .setUpdateMask(FieldMasks.allSetFieldsOf(campaignConversionGoal))
              .build();
      mutateOperations.add(
          MutateOperation.newBuilder()
              .setCampaignConversionGoalOperation(campaignConversionGoalOperation)
              .build());
    }
    return mutateOperations;
  }


  /** Creates a MutateOperation that creates a new asset group listing group filter. */
  private MutateOperation createAssetGroupListingGroupFilterOperation(
      String assetGroupResourceName) {

    // Creates a new asset group listing group filter containing the "default" listing group (All
    // products).
    AssetGroupListingGroupFilter listingGroupFilter =
        AssetGroupListingGroupFilter.newBuilder()
            .setAssetGroup(assetGroupResourceName)
            // Does not set the parentListingGroupFilter since this is the root node. For all other
            // nodes, this would refer to the parent listing group filter resource name.
            // .setParentListingGroupFilter("<PARENT FILTER RESOURCE NAME>")

            // Sets the type to UNIT_INCLUDED since this node has no children.
            .setType(ListingGroupFilterType.UNIT_INCLUDED)
            // Specifies that this uses the SHOPPING listing source, as required for a Performance
            // Max retail campaign.
            .setListingSource(ListingGroupFilterListingSource.SHOPPING)
            .build();

    // Returns an operation to the list to create the listing group filter.
    return MutateOperation.newBuilder()
        .setAssetGroupListingGroupFilterOperation(
            AssetGroupListingGroupFilterOperation.newBuilder().setCreate(listingGroupFilter))
        .build();
  }


  /**
   * Prints the details of a MutateGoogleAdsResponse.
   *
   * <p>Parses the "response" oneof field name and uses it to extract the new entity's name and
   * resource name.
   */
  private void printResponseDetails(MutateGoogleAdsResponse response) {
    // Parses the Mutate response to print details about the entities that were created by the
    // request.
    String suffix = "_result";
    for (MutateOperationResponse result : response.getMutateOperationResponsesList()) {
      for (Entry<FieldDescriptor, Object> responseFields : result.getAllFields().entrySet()) {
        String fieldName = responseFields.getKey().getName();
        String value = responseFields.getValue().toString().trim();
        if (fieldName.endsWith(suffix)) {
          fieldName = fieldName.substring(0, fieldName.length() - suffix.length());
        }
        System.out.printf("Created a(n) %s with %s.%n", fieldName, value);
      }
    }
  }

  /** Returns the next temporary ID and decreases it by one. */
  private long getNextTemporaryId() {
    return temporaryId--;
  }
}
AddPerformanceMaxRetailCampaign.java
      

C#

// Copyright 2021 Google LLC
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

using CommandLine;
using Google.Ads.Gax.Examples;
using Google.Ads.Gax.Util;
using Google.Ads.GoogleAds.Config;
using Google.Ads.GoogleAds.Lib;
using Google.Ads.GoogleAds.V17.Common;
using Google.Ads.GoogleAds.V17.Errors;
using Google.Ads.GoogleAds.V17.Resources;
using Google.Ads.GoogleAds.V17.Services;
using Google.Api.Gax;
using Google.Protobuf;
using System;
using System.Collections.Generic;
using System.Threading;
using static Google.Ads.GoogleAds.V17.Enums.AdvertisingChannelTypeEnum.Types;
using static Google.Ads.GoogleAds.V17.Enums.AssetFieldTypeEnum.Types;
using static Google.Ads.GoogleAds.V17.Enums.AssetGroupStatusEnum.Types;
using static Google.Ads.GoogleAds.V17.Enums.BudgetDeliveryMethodEnum.Types;
using static Google.Ads.GoogleAds.V17.Enums.CampaignStatusEnum.Types;
using static Google.Ads.GoogleAds.V17.Enums.ConversionActionCategoryEnum.Types;
using static Google.Ads.GoogleAds.V17.Enums.ConversionOriginEnum.Types;
using static Google.Ads.GoogleAds.V17.Enums.ListingGroupFilterListingSourceEnum.Types;
using static Google.Ads.GoogleAds.V17.Enums.ListingGroupFilterTypeEnum.Types;
using static Google.Ads.GoogleAds.V17.Resources.Campaign.Types;

namespace Google.Ads.GoogleAds.Examples.V17
{
    /// <summary>
    /// This example shows how to create a Performance Max retail campaign.
    ///
    /// This will be created for "All products".
    ///
    /// For more information about Performance Max retail campaigns, see
    /// https://developers.google.com/google-ads/api/docs/performance-max/retail
    ///
    /// Prerequisites:
    /// - You need to have access to a Merchant Center account. You can find
    ///   instructions to create a Merchant Center account here:
    ///   https://support.google.com/merchants/answer/188924.
    ///   This account must be linked to your Google Ads account. The integration
    ///   instructions can be found at:
    ///   https://developers.google.com/google-ads/api/docs/shopping-ads/merchant-center
    /// - You need your Google Ads account to track conversions. The different ways
    ///   to track conversions can be found here:
    ///   https://support.google.com/google-ads/answer/1722054.
    /// - You must have at least one conversion action in the account. For
    ///   more about conversion actions, see
    ///   https://developers.google.com/google-ads/api/docs/conversions/overview#conversion_actions
    /// </summary>
    public class AddPerformanceMaxRetailCampaign : ExampleBase
    {
        /// <summary>
        /// Command line options for running the <see cref="AddPerformanceMaxRetailCampaign"/>
        /// example.
        /// </summary>
        public class Options : OptionsBase
        {
            /// <summary>
            /// The Google Ads customer ID.
            /// </summary>
            [Option("customerId", Required = true, HelpText =
                "The Google Ads customer ID.")]
            public long CustomerId { get; set; }

            /// <summary>
            /// The Merchant Center account ID.
            /// </summary>
            [Option("merchantCenterAccountId", Required = true, HelpText =
                "The Merchant Center account ID.")]
            public long MerchantCenterAccountId { get; set; }

            /// <summary>
            /// The final url for the generated ads. Must have the same domain as the Merchant
            /// Center account.
            /// </summary>
            [Option("finalUrl", Required = true, HelpText =
                "The final url for the generated ads." +
                "Must have the same domain as the Merchant Center account.")]
            public string FinalUrl { get; set; }
        }

        /// <summary>
        /// Main method, to run this code example as a standalone application.
        /// </summary>
        /// <param name="args">The command line arguments.</param>
        public static void Main(string[] args)
        {
            Options options = ExampleUtilities.ParseCommandLine<Options>(args);

            AddPerformanceMaxRetailCampaign codeExample = new AddPerformanceMaxRetailCampaign();
            Console.WriteLine(codeExample.Description);
            codeExample.Run(
                new GoogleAdsClient(),
                options.CustomerId,
                options.MerchantCenterAccountId,
                options.FinalUrl
            );
        }

        // We specify temporary IDs that are specific to a single mutate request. Temporary IDs are
        // always negative and unique within one mutate request.
        //
        // See https://developers.google.com/google-ads/api/docs/mutating/best-practices for further
        // details.
        //
        // These temporary IDs are fixed because they are used in multiple places.
        private const int TEMPORARY_ID_BUDGET = -1;

        private const int TEMPORARY_ID_CAMPAIGN = -2;
        private const int TEMPORARY_ID_ASSET_GROUP = -3;

        // There are also entities that will be created in the same request but do not need to be
        // fixed temporary IDs because they are referenced only once.
        private class AssetGroupAssetTemporaryResourceNameGenerator
        {
            private long customerId;
            private long next;

            public AssetGroupAssetTemporaryResourceNameGenerator(long customerId, long assetGroupId)
            {
                this.customerId = customerId;
                this.next = assetGroupId - 1;
            }

            public string Next()
            {
                long i = next;
                Interlocked.Decrement(ref next);
                return ResourceNames.Asset(customerId, i);
            }
        }

        /// <summary>
        /// Returns a description about the code example.
        /// </summary>
        public override string Description =>
            "This example shows how to create a Performance Max retail campaign.";

        /// <summary>
        /// Runs the code example.
        /// </summary>
        /// <param name="client">The Google Ads client.</param>
        /// <param name="customerId">The Google Ads customer ID.</param>
        /// <param name="merchantCenterAccountId">The Merchant Center account ID.</param>
        /// <param name="finalUrl">The final URL.</param>
        public void Run(
                GoogleAdsClient client,
                long customerId,
                long merchantCenterAccountId,
                string finalUrl)
        {
            try
            {
                GoogleAdsServiceClient googleAdsServiceClient =
                client.GetService(Services.V17.GoogleAdsService);

                // This campaign will override the customer conversion goals.
                // Retrieve the current list of customer conversion goals.
                List<CustomerConversionGoal> customerConversionGoals =
                    GetCustomerConversionGoals(client, customerId);

                // Performance Max campaigns require that repeated assets such as headlines and
                // descriptions be created before the campaign.
                //
                // For the list of required assets for a Performance Max campaign, see
                // https://developers.google.com/google-ads/api/docs/performance-max/assets
                //
                // Create the headlines.
                List<string> headlineAssetResourceNames = CreateMultipleTextAssets(
                    client,
                    customerId,
                    new[] {
                    "Travel",
                    "Travel Reviews",
                    "Book travel"
                    }
                );

                // Create the descriptions.
                List<string> descriptionAssetResourceNames = CreateMultipleTextAssets(
                    client,
                    customerId,
                    new[] {
                    "Take to the air!",
                    "Fly to the sky!"
                    }
                );

                string tempResourceNameCampaignBudget = ResourceNames.CampaignBudget(
                    customerId,
                    TEMPORARY_ID_BUDGET
                );

                string assetGroupResourceName = ResourceNames.AssetGroup(
                    customerId,
                    TEMPORARY_ID_ASSET_GROUP
                );

                // The below methods create and return MutateOperations that we later provide to the
                // GoogleAdsService.Mutate method in order to create the entities in a single request.
                // Since the entities for a Performance Max campaign are closely tied to one-another,
                // it's considered a best practice to create them in a single Mutate request so they all
                // complete successfully or fail entirely, leaving no orphaned entities.
                //
                // See: https://developers.google.com/google-ads/api/docs/mutating/overview
                MutateOperation campaignBudgetOperation = CreateCampaignBudgetOperation(
                    tempResourceNameCampaignBudget
                );

                string tempResourceNameCampaign = ResourceNames.Campaign(
                    customerId,
                    TEMPORARY_ID_CAMPAIGN
                );

                MutateOperation performanceMaxCampaignOperation =
                    CreatePerformanceMaxCampaignOperation(
                            tempResourceNameCampaign,
                            tempResourceNameCampaignBudget,
                            merchantCenterAccountId
                        );

                List<MutateOperation> campaignCriterionOperations =
                    CreateCampaignCriterionOperations(tempResourceNameCampaign);

                List<MutateOperation> assetGroupOperations =
                    CreateAssetGroupOperations(
                        tempResourceNameCampaign,
                        assetGroupResourceName,
                        finalUrl,
                        headlineAssetResourceNames,
                        descriptionAssetResourceNames,
                        new AssetGroupAssetTemporaryResourceNameGenerator(
                            customerId,
                            TEMPORARY_ID_ASSET_GROUP
                        ),
                        client.Config
                    );

                List<MutateOperation> conversionGoalOperations =
                    CreateCustomerConversionGoalOperations(
                        customerId,
                        customerConversionGoals
                    );

                // Retail Performance Max campaigns require listing groups, which are created via the
                // AssetGroupListingGroupFilter resource.
                List<MutateOperation> assetGroupListingGroupOperations =
                    CreateAssetGroupListingGroupOperations(
                        assetGroupResourceName
                    );

                MutateGoogleAdsRequest request = new MutateGoogleAdsRequest
                {
                    CustomerId = customerId.ToString()
                };

                // It's important to create these entities in this order because they depend on
                // each other.
                //
                // Additionally, we take several lists of operations and flatten them into one
                // large list.
                request.MutateOperations.Add(campaignBudgetOperation);
                request.MutateOperations.Add(performanceMaxCampaignOperation);
                request.MutateOperations.AddRange(campaignCriterionOperations);
                request.MutateOperations.AddRange(assetGroupOperations);
                request.MutateOperations.AddRange(conversionGoalOperations);
                request.MutateOperations.AddRange(assetGroupListingGroupOperations);

                MutateGoogleAdsResponse response = googleAdsServiceClient.Mutate(request);

                PrintResponseDetails(response);
            }
            catch (GoogleAdsException e)
            {
                Console.WriteLine("Failure:");
                Console.WriteLine($"Message: {e.Message}");
                Console.WriteLine($"Failure: {e.Failure}");
                Console.WriteLine($"Request ID: {e.RequestId}");
                throw;
            }
        }

        /// <summary>
        /// Creates a MutateOperation that creates a new CampaignBudget.
        ///
        /// A temporary ID will be assigned to this campaign budget so that it can be
        /// referenced by other objects being created in the same Mutate request.
        /// </summary>
        /// <param name="budgetResourceName">The temporary resource name of the budget to
        /// create.</param>
        /// <returns>A MutateOperation that creates a CampaignBudget.</returns>
        private MutateOperation CreateCampaignBudgetOperation(
            string budgetResourceName)
        {
            MutateOperation operation = new MutateOperation
            {
                CampaignBudgetOperation = new CampaignBudgetOperation
                {
                    Create = new CampaignBudget
                    {
                        Name = "Performance Max campaign budget #"
                          + ExampleUtilities.GetRandomString(),

                        // The budget period already defaults to Daily.
                        AmountMicros = 50000000,
                        DeliveryMethod = BudgetDeliveryMethod.Standard,

                        // A Performance Max campaign cannot use a shared campaign budget.
                        ExplicitlyShared = false,

                        // Set a temporary ID in the budget's resource name so it can be referenced
                        // by the campaign in later steps.
                        ResourceName = budgetResourceName
                    }
                }
            };

            return operation;
        }


        /// Creates a MutateOperation that creates a new Performance Max campaign.
        /// <param name="campaignResourceName">The campaign resource name.</param>
        /// <param name="campaignBudgetResourceName">The campaign budget resource name.</param>
        /// <param name="merchantCenterAccountId">The Merchant Center account ID.</param>
        /// <returns>A MutateOperations that will create this new campaign.</returns>
        private MutateOperation CreatePerformanceMaxCampaignOperation(
            string campaignResourceName,
            string campaignBudgetResourceName,
            long merchantCenterAccountId)
        {
            MutateOperation operation = new MutateOperation()
            {
                CampaignOperation = new CampaignOperation()
                {
                    Create = new Campaign()
                    {
                        Name = "Performance Max campaign #" + ExampleUtilities.GetRandomString(),

                        // Set the campaign status as PAUSED. The campaign is the only entity in
                        // the mutate request that should have its status set.
                        Status = CampaignStatus.Paused,

                        // All Performance Max campaigns have an advertising_channel_type of
                        // PERFORMANCE_MAX. The advertising_channel_sub_type should not be set.
                        AdvertisingChannelType = AdvertisingChannelType.PerformanceMax,

                        // Bidding strategy must be set directly on the campaign. Setting a
                        // portfolio bidding strategy by resource name is not supported. Max
                        // Conversion and Maximize Conversion Value are the only strategies
                        // supported for Performance Max campaigns. BiddingStrategyTYpe is
                        // read-only and cannot be set by the API. An optional ROAS (Return on
                        // Advertising Spend) can be set to enable the MaximizeConversionValue
                        // bidding strategy. The ROAS value must be specified as a ratio in the API.
                        // It is calculated by dividing "total value" by "total spend".
                        //
                        // For more information on Maximize Conversion Value, see the support
                        // article:
                        // http://support.google.com/google-ads/answer/7684216.
                        //
                        // A target_roas of 3.5 corresponds to a 350% return on ad spend.
                        MaximizeConversionValue = new MaximizeConversionValue()
                        {
                            TargetRoas = 3.5
                        },

                        ShoppingSetting = new ShoppingSetting()
                        {
                            MerchantId = merchantCenterAccountId,
                            // Optional: To use products only from a specific feed, set FeedLabel
                            // to the feed label used in Merchant Center.
                            // See: https://support.google.com/merchants/answer/12453549.
                            // Omitting the FeedLabel field will use products from all feeds.
                            // FeedLabel = "INSERT_FEED_LABEL_HERE"
                        },

                        // Set the Final URL expansion opt out. This flag is specific to
                        // Performance Max campaigns. If opted out (True), only the final URLs in
                        // the asset group or URLs specified in the advertiser's Google Merchant
                        // Center or business data feeds are targeted.
                        //
                        // If opted in (False), the entire domain will be targeted. For best
                        // results, set this value to false to opt in and allow URL expansions. You
                        // can optionally add exclusions to limit traffic to parts of your website.
                        //
                        // For a Retail campaign, we want the final URL's to be limited to those
                        // explicitly surfaced via GMC.
                        UrlExpansionOptOut = true,

                        // Use the temporary resource name created earlier
                        ResourceName = campaignResourceName,

                        // Set the budget using the given budget resource name.
                        CampaignBudget = campaignBudgetResourceName,

                        // Optional fields
                        StartDate = DateTime.Now.AddDays(1).ToString("yyyyMMdd"),
                        EndDate = DateTime.Now.AddDays(365).ToString("yyyyMMdd")
                    }
                }
            };

            return operation;
        }


        /// <summary>
        /// Creates a list of MutateOperations that create new campaign criteria.
        /// </summary>
        /// <param name="campaignResourceName">The campaign resource name.</param>
        /// <returns>A list of MutateOperations that create new campaign criteria.</returns>
        private List<MutateOperation> CreateCampaignCriterionOperations(
            string campaignResourceName)
        {
            List<MutateOperation> operations = new List<MutateOperation>();

            // Set the LOCATION campaign criteria.
            // Target all of New York City except Brooklyn.
            // Location IDs are listed here:
            // https://developers.google.com/google-ads/api/reference/data/geotargets
            // and they can also be retrieved using the GeoTargetConstantService as shown
            // here: https://developers.google.com/google-ads/api/docs/targeting/location-targeting
            //
            // We will add one positive location target for New York City (ID=1023191)
            // and one negative location target for Brooklyn (ID=1022762).
            // First, add the positive (negative = False) for New York City.
            MutateOperation operation1 = new MutateOperation()
            {
                CampaignCriterionOperation = new CampaignCriterionOperation()
                {
                    Create = new CampaignCriterion()
                    {
                        Campaign = campaignResourceName,
                        Location = new LocationInfo()
                        {
                            GeoTargetConstant = ResourceNames.GeoTargetConstant(1023191)
                        },

                        Negative = false
                    }
                }
            };

            operations.Add(operation1);

            // Next add the negative target for Brooklyn.
            MutateOperation operation2 = new MutateOperation()
            {
                CampaignCriterionOperation = new CampaignCriterionOperation()
                {
                    Create = new CampaignCriterion()
                    {
                        Campaign = campaignResourceName,
                        Location = new LocationInfo()
                        {
                            GeoTargetConstant = ResourceNames.GeoTargetConstant(1022762)
                        },

                        Negative = true
                    }
                }
            };

            operations.Add(operation2);

            // Set the LANGUAGE campaign criterion.
            MutateOperation operation3 = new MutateOperation()
            {
                CampaignCriterionOperation = new CampaignCriterionOperation()
                {
                    Create = new CampaignCriterion()
                    {
                        Campaign = campaignResourceName,

                        // Set the language.
                        // For a list of all language codes, see:
                        // https://developers.google.com/google-ads/api/reference/data/codes-formats#expandable-7
                        Language = new LanguageInfo()
                        {
                            LanguageConstant = ResourceNames.LanguageConstant(1000) // English
                        },
                    }
                }
            };

            operations.Add(operation3);

            return operations;
        }


        /// <summary>
        /// Creates multiple text assets and returns the list of resource names.
        /// These repeated assets must be created in a separate request prior to
        /// creating the campaign.
        /// </summary>
        /// <param name="client">The Google Ads Client.</param>
        /// <param name="customerId">The customer's ID.</param>
        /// <param name="texts">The texts to add.</param>
        /// <returns>A list of asset resource names.</returns>
        private List<string> CreateMultipleTextAssets(
            GoogleAdsClient client,
            long customerId,
            string[] texts)
        {
            // Get the GoogleAdsService.
            GoogleAdsServiceClient googleAdsServiceClient =
                client.GetService(Services.V17.GoogleAdsService);

            MutateGoogleAdsRequest request = new MutateGoogleAdsRequest()
            {
                CustomerId = customerId.ToString()
            };

            foreach (string text in texts)
            {
                request.MutateOperations.Add(
                    new MutateOperation()
                    {
                        AssetOperation = new AssetOperation()
                        {
                            Create = new Asset()
                            {
                                TextAsset = new TextAsset()
                                {
                                    Text = text
                                }
                            }
                        }
                    }
                );
            }

            // Send the operations in a single Mutate request.
            MutateGoogleAdsResponse response = googleAdsServiceClient.Mutate(request);

            List<string> assetResourceNames = new List<string>();

            foreach (MutateOperationResponse operationResponse in response.MutateOperationResponses)
            {
                MutateAssetResult assetResult = operationResponse.AssetResult;
                assetResourceNames.Add(assetResult.ResourceName);
            }

            PrintResponseDetails(response);

            return assetResourceNames;
        }


        /// <summary>
        /// Creates a list of MutateOperations that create a new asset_group.
        /// </summary>
        /// <param name="campaignResourceName">The campaign resource name.</param>
        /// <param name="assetGroupResourceName">The asset group resource name.</param>
        /// <param name="finalUrl">The final url.</param>
        /// <param name="headlineAssetResourceNames">The headline asset resource names.</param>
        /// <param name="descriptionAssetResourceNames">The description asset resource
        /// names.</param>
        /// <param name="resourceNameGenerator">A generator for unique temporary ID's.</param>
        /// <param name="config">The Google Ads config.</param>
        /// <returns>A list of MutateOperations that create the new asset group.</returns>
        private List<MutateOperation> CreateAssetGroupOperations(
            string campaignResourceName,
            string assetGroupResourceName,
            string finalUrl,
            List<string> headlineAssetResourceNames,
            List<string> descriptionAssetResourceNames,
            AssetGroupAssetTemporaryResourceNameGenerator resourceNameGenerator,
            GoogleAdsConfig config)
        {
            List<MutateOperation> operations = new List<MutateOperation>();

            // For the list of required assets for a Performance Max campaign, see
            // https://developers.google.com/google-ads/api/docs/performance-max/assets

            // Create and link the long headline text asset.
            string longHeadlineResourceName = resourceNameGenerator.Next();
            operations.Add(
                CreateTextAssetOperation(
                    longHeadlineResourceName,
                    "Travel the World"
                )
            );

            // Create the business name text asset.
            string businessNameResourceName = resourceNameGenerator.Next();
            operations.Add(
                CreateTextAssetOperation(
                    businessNameResourceName,
                    "Interplanetary Cruises"
                )
            );

            // Create the Logo Asset.
            string logoResourceName = resourceNameGenerator.Next();
            operations.Add(
                CreateImageAssetOperation(
                    logoResourceName,
                    "https://gaagl.page.link/1Crm",
                    "Logo Image",
                    config
                )
            );

            // Create the Marketing Image Asset.
            string marketingImageResourceName = resourceNameGenerator.Next();
            operations.Add(
                CreateImageAssetOperation(
                    marketingImageResourceName,
                    "https://gaagl.page.link/Eit5",
                    "Marketing Image",
                    config
                )
            );

            // Create the Square Marketing Image Asset.
            string squareMarketingImageResourceName = resourceNameGenerator.Next();
            operations.Add(
                CreateImageAssetOperation(
                    squareMarketingImageResourceName,
                    "https://gaagl.page.link/bjYi",
                    "Square Marketing Image",
                    config
                )
            );

            // An AssetGroup is linked to an Asset by creating a new AssetGroupAsset
            // and providing:
            //   the resource name of the AssetGroup
            //   the resource name of the Asset
            //   the field_type of the Asset in this AssetGroup.
            //
            // To learn more about AssetGroups, see
            // https://developers.google.com/google-ads/api/docs/performance-max/asset-groups
            //
            // Also, note that all asset creation operations must be before the
            // asset group creation operation and the asset group linking operations.

            // Create the AssetGroup
            operations.Add(
                new MutateOperation()
                {
                    AssetGroupOperation = new AssetGroupOperation()
                    {
                        Create = new AssetGroup()
                        {
                            Name = "Performance Max asset group #" +
                                ExampleUtilities.GetRandomString(),

                            Campaign = campaignResourceName,
                            FinalUrls = { finalUrl },
                            FinalMobileUrls = { finalUrl },
                            Status = AssetGroupStatus.Paused,
                            ResourceName = assetGroupResourceName
                        }
                    }
                }
            );

            // Link the previously created assets.

            // Link the headline assets.
            foreach (string resourceName in headlineAssetResourceNames)
            {
                operations.Add(
                    new MutateOperation()
                    {
                        AssetGroupAssetOperation = new AssetGroupAssetOperation()
                        {
                            Create = new AssetGroupAsset()
                            {
                                FieldType = AssetFieldType.Headline,
                                AssetGroup = assetGroupResourceName,
                                Asset = resourceName
                            }
                        }
                    }
                );
            }

            // Link the description assets.
            foreach (string resourceName in descriptionAssetResourceNames)
            {
                operations.Add(
                    new MutateOperation()
                    {
                        AssetGroupAssetOperation = new AssetGroupAssetOperation()
                        {
                            Create = new AssetGroupAsset()
                            {
                                FieldType = AssetFieldType.Description,
                                AssetGroup = assetGroupResourceName,
                                Asset = resourceName
                            }
                        }
                    }
                );
            }

            operations.Add(
                CreateLinkAssetOperation(
                    AssetFieldType.LongHeadline,
                    assetGroupResourceName,
                    longHeadlineResourceName
                )
            );

            operations.Add(
                CreateLinkAssetOperation(
                    AssetFieldType.BusinessName,
                    assetGroupResourceName,
                    businessNameResourceName
                )
            );

            operations.Add(
                CreateLinkAssetOperation(
                    AssetFieldType.Logo,
                    assetGroupResourceName,
                    logoResourceName
                )
            );

            operations.Add(
                CreateLinkAssetOperation(
                    AssetFieldType.MarketingImage,
                    assetGroupResourceName,
                    marketingImageResourceName
                )
            );

            operations.Add(
                CreateLinkAssetOperation(
                    AssetFieldType.SquareMarketingImage,
                    assetGroupResourceName,
                    squareMarketingImageResourceName
                )
            );

            return operations;
        }


        /// <summary>
        /// Creates a MutateOperation that creates a new text asset.
        /// </summary>
        /// <param name="assetResourceName">The resource name of the text asset to be
        /// created.</param>
        /// <param name="text">The text of the asset to be created.</param>
        /// <returns>A MutateOperation that creates the new text asset.</returns>
        private MutateOperation CreateTextAssetOperation(
            string assetResourceName,
            string text) => new MutateOperation()
            {
                AssetOperation = new AssetOperation()
                {
                    Create = new Asset()
                    {
                        ResourceName = assetResourceName,
                        TextAsset = new TextAsset()
                        {
                            Text = text
                        }
                    }
                }
            };


        /// <summary>
        /// Creates a MutateOperation that creates a new image asset.
        /// </summary>
        /// <param name="assetResourceName">The resource name of the text asset to be
        /// created.</param>
        /// <param name="url">The url of the image to be retrieved and put into an asset.</param>
        /// <param name="assetName">The asset name.</param>
        /// <param name="config">The Google Ads config.</param>
        /// <returns>A MutateOperation that creates a new image asset.</returns>
        private MutateOperation CreateImageAssetOperation(
            string assetResourceName,
            string url,
            string assetName,
            GoogleAdsConfig config) => new MutateOperation()
            {
                AssetOperation = new AssetOperation()
                {
                    Create = new Asset()
                    {
                        ResourceName = assetResourceName,
                        ImageAsset = new ImageAsset()
                        {
                            Data =
                            ByteString.CopyFrom(
                                MediaUtilities.GetAssetDataFromUrl(url, config)
                            )
                        },
                        // Provide a unique friendly name to identify your asset.
                        // When there is an existing image asset with the same content but a
                        // different name, the new name will be dropped silently.
                        Name = assetName
                    }
                }
            };


        /// <summary>
        /// Creates a MutateOperation that links an asset to an asset group.
        /// </summary>
        /// <param name="fieldType">The field type of the asset to be linked.</param>
        /// <param name="assetGroupResourceName">The resource name of the asset group
        /// to link the asset to.</param>
        /// <param name="assetResourceName">The resource name of the text asset to be
        /// linked.</param>
        /// <returns>A MutateOperation that links an asset to an asset group.</returns>
        private MutateOperation CreateLinkAssetOperation(
            AssetFieldType fieldType,
            string assetGroupResourceName,
            string assetResourceName) => new MutateOperation()
            {
                AssetGroupAssetOperation = new AssetGroupAssetOperation()
                {
                    Create = new AssetGroupAsset()
                    {
                        FieldType = fieldType,
                        AssetGroup = assetGroupResourceName,
                        Asset = assetResourceName
                    }
                }
            };


        /// <summary>
        /// Retrieves the list of customer conversion goals.
        /// </summary>
        /// <param name="client">The Google Ads Client.</param>
        /// <param name="customerId">The customer's id.</param>
        /// <returns>A list customer conversion goals.</returns>
        private List<CustomerConversionGoal> GetCustomerConversionGoals(
            GoogleAdsClient client,
            long customerId)
        {
            // Get the GoogleAdsService.
            GoogleAdsServiceClient googleAdsServiceClient =
                client.GetService(Services.V17.GoogleAdsService);

            List<CustomerConversionGoal> conversionGoals = new List<CustomerConversionGoal>();

            SearchGoogleAdsRequest request = new SearchGoogleAdsRequest()
            {
                CustomerId = customerId.ToString(),
                Query =
                    @"SELECT
                        customer_conversion_goal.category,
                        customer_conversion_goal.origin
                    FROM
                        customer_conversion_goal"
            };

            // The number of conversion goals is typically less than 50 so we use
            // GoogleAdsService.search instead of search_stream.
            PagedEnumerable<SearchGoogleAdsResponse, GoogleAdsRow> searchPagedResponse =
                googleAdsServiceClient.Search(request);

            // Iterate over the results and build the list of conversion goals.
            foreach (GoogleAdsRow row in searchPagedResponse)
            {
                conversionGoals.Add(row.CustomerConversionGoal);
            }

            return conversionGoals;
        }

        /// <summary>
        /// Creates a list of MutateOperations that override customer conversion goals.
        /// </summary>
        /// <param name="customerId">The customer's id.</param>
        /// <param name="conversionGoals">A list customer conversion goals.</param>
        /// <returns>A list customer conversion goal operations.</returns>
        private List<MutateOperation> CreateCustomerConversionGoalOperations(
            long customerId,
            List<CustomerConversionGoal> conversionGoals)
        {
            List<MutateOperation> operations =
                new List<MutateOperation>();

            foreach (CustomerConversionGoal conversionGoal in conversionGoals)
            {
                CustomerConversionGoal newConversionGoal = new CustomerConversionGoal()
                {
                    ResourceName = ResourceNames.CustomerConversionGoal(
                        customerId,
                        conversionGoal.Category,
                        conversionGoal.Origin
                    ),
                };

                // Change the biddability for the campaign conversion goal.
                // Set biddability to True for the desired (category, origin).
                // Set biddability to False for all other conversion goals.
                // Note:
                //  1- It is assumed that this Conversion Action
                //     (category=PURCHASE, origin=WEBSITE) exists in this account.
                //  2- More than one goal can be biddable if desired. This example
                //     shows only one.
                newConversionGoal.Biddable =
                    conversionGoal.Category == ConversionActionCategory.Purchase &&
                    conversionGoal.Origin == ConversionOrigin.Website;

                operations.Add(
                    new MutateOperation()
                    {
                        CustomerConversionGoalOperation = new CustomerConversionGoalOperation()
                        {
                            Update = newConversionGoal,
                            UpdateMask = FieldMasks.AllSetFieldsOf(newConversionGoal)
                        }
                    }
                );
            }

            return operations;
        }


        /// <summary>
        /// Creates a list of MutateOperations that create a new asset group
        /// listing group filter.
        /// </summary>
        /// <param name="assetGroupResourceName">The resource name of the asset group.</param>
        /// <returns>A list of mutate operations.</returns>
        private List<MutateOperation> CreateAssetGroupListingGroupOperations(
            string assetGroupResourceName)
        {
            List<MutateOperation> operations = new List<MutateOperation>();

            // Creates a new ad group criterion containing the "default" listing group (All
            // products).
            AssetGroupListingGroupFilter listingGroupFilter = new AssetGroupListingGroupFilter()
            {
                AssetGroup = assetGroupResourceName,

                // Since this is the root node, do not set the ParentListingGroupFilter. For all
                // other nodes, this would refer to the parent listing group filter resource name.
                // ParentListingGroupFilter = "<PARENT FILTER NAME>"

                // The UnitIncluded means this node has no children.
                Type = ListingGroupFilterType.UnitIncluded,

                // Because this is a Performance Max campaign for retail, we need to specify that
                // this is in the shopping listing source.
                ListingSource = ListingGroupFilterListingSource.Shopping
            };

            AssetGroupListingGroupFilterOperation operation =
                new AssetGroupListingGroupFilterOperation()
                {
                    Create = listingGroupFilter
                };

            operations.Add(
                new MutateOperation()
                {
                    AssetGroupListingGroupFilterOperation = operation
                }
            );

            return operations;
        }


        /// <summary>
        /// Prints the details of a MutateGoogleAdsResponse. Parses the "response" oneof field name
        /// and uses it to extract the new entity's name and resource name.
        /// </summary>
        /// <param name="response">A MutateGoogleAdsResponse instance.</param>
        private void PrintResponseDetails(MutateGoogleAdsResponse response)
        {
            // Parse the Mutate response to print details about the entities that were created
            // in the request.
            foreach (MutateOperationResponse operationResponse in response.MutateOperationResponses)
            {
                string resourceName;

                string entityName = operationResponse.ResponseCase.ToString();
                // Trim the substring "Result" from the end of the entity name.
                entityName = entityName.Remove(entityName.Length - 6);

                switch (operationResponse.ResponseCase)
                {
                    case MutateOperationResponse.ResponseOneofCase.AdGroupResult:
                        resourceName = operationResponse.AdGroupResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.AdGroupAdResult:
                        resourceName = operationResponse.AdGroupAdResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.CampaignResult:
                        resourceName = operationResponse.CampaignResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.CampaignBudgetResult:
                        resourceName = operationResponse.CampaignBudgetResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.CampaignCriterionResult:
                        resourceName = operationResponse.CampaignCriterionResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.SmartCampaignSettingResult:
                        resourceName = operationResponse.SmartCampaignSettingResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.AssetResult:
                        resourceName = operationResponse.AssetResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.AssetGroupAssetResult:
                        resourceName = operationResponse.AssetGroupAssetResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.AssetGroupResult:
                        resourceName = operationResponse.AssetGroupResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.AssetGroupListingGroupFilterResult:
                        resourceName = operationResponse.AssetGroupListingGroupFilterResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.CampaignConversionGoalResult:
                        resourceName = operationResponse.CampaignConversionGoalResult.ResourceName;
                        break;

                    case MutateOperationResponse.ResponseOneofCase.CustomerConversionGoalResult:
                        resourceName = operationResponse.CustomerConversionGoalResult.ResourceName;
                        break;

                    default:
                        resourceName = "<not found>";
                        break;
                }

                Console.WriteLine(
                    $"Created a(n) {entityName} with resource name: '{resourceName}'.");
            }
        }
    }
}
AddPerformanceMaxRetailCampaign.cs
      

PHP

<?php

/**
 * Copyright 2021 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

namespace Google\Ads\GoogleAds\Examples\ShoppingAds;

require __DIR__ . '/../../vendor/autoload.php';

use GetOpt\GetOpt;
use Google\Ads\GoogleAds\Examples\Utils\ArgumentNames;
use Google\Ads\GoogleAds\Examples\Utils\ArgumentParser;
use Google\Ads\GoogleAds\Examples\Utils\Helper;
use Google\Ads\GoogleAds\Lib\OAuth2TokenBuilder;
use Google\Ads\GoogleAds\Lib\V17\GoogleAdsClient;
use Google\Ads\GoogleAds\Lib\V17\GoogleAdsClientBuilder;
use Google\Ads\GoogleAds\Lib\V17\GoogleAdsException;
use Google\Ads\GoogleAds\Util\FieldMasks;
use Google\Ads\GoogleAds\Util\V17\ResourceNames;
use Google\Ads\GoogleAds\V17\Common\ImageAsset;
use Google\Ads\GoogleAds\V17\Common\LanguageInfo;
use Google\Ads\GoogleAds\V17\Common\LocationInfo;
use Google\Ads\GoogleAds\V17\Common\MaximizeConversionValue;
use Google\Ads\GoogleAds\V17\Common\TextAsset;
use Google\Ads\GoogleAds\V17\Enums\AdvertisingChannelTypeEnum\AdvertisingChannelType;
use Google\Ads\GoogleAds\V17\Enums\AssetFieldTypeEnum\AssetFieldType;
use Google\Ads\GoogleAds\V17\Enums\AssetGroupStatusEnum\AssetGroupStatus;
use Google\Ads\GoogleAds\V17\Enums\BudgetDeliveryMethodEnum\BudgetDeliveryMethod;
use Google\Ads\GoogleAds\V17\Enums\CampaignStatusEnum\CampaignStatus;
use Google\Ads\GoogleAds\V17\Enums\ConversionActionCategoryEnum\ConversionActionCategory;
use Google\Ads\GoogleAds\V17\Enums\ConversionOriginEnum\ConversionOrigin;
use Google\Ads\GoogleAds\V17\Enums\ListingGroupFilterListingSourceEnum\ListingGroupFilterListingSource;
use Google\Ads\GoogleAds\V17\Enums\ListingGroupFilterTypeEnum\ListingGroupFilterType;
use Google\Ads\GoogleAds\V17\Errors\GoogleAdsError;
use Google\Ads\GoogleAds\V17\Resources\Asset;
use Google\Ads\GoogleAds\V17\Resources\AssetGroup;
use Google\Ads\GoogleAds\V17\Resources\AssetGroupAsset;
use Google\Ads\GoogleAds\V17\Resources\AssetGroupListingGroupFilter;
use Google\Ads\GoogleAds\V17\Resources\Campaign;
use Google\Ads\GoogleAds\V17\Resources\Campaign\ShoppingSetting;
use Google\Ads\GoogleAds\V17\Resources\CampaignBudget;
use Google\Ads\GoogleAds\V17\Resources\CampaignConversionGoal;
use Google\Ads\GoogleAds\V17\Resources\CampaignCriterion;
use Google\Ads\GoogleAds\V17\Services\AssetGroupAssetOperation;
use Google\Ads\GoogleAds\V17\Services\AssetGroupListingGroupFilterOperation;
use Google\Ads\GoogleAds\V17\Services\AssetGroupOperation;
use Google\Ads\GoogleAds\V17\Services\AssetOperation;
use Google\Ads\GoogleAds\V17\Services\CampaignBudgetOperation;
use Google\Ads\GoogleAds\V17\Services\CampaignConversionGoalOperation;
use Google\Ads\GoogleAds\V17\Services\CampaignCriterionOperation;
use Google\Ads\GoogleAds\V17\Services\CampaignOperation;
use Google\Ads\GoogleAds\V17\Services\GoogleAdsRow;
use Google\Ads\GoogleAds\V17\Services\MutateGoogleAdsRequest;
use Google\Ads\GoogleAds\V17\Services\MutateGoogleAdsResponse;
use Google\Ads\GoogleAds\V17\Services\MutateOperation;
use Google\Ads\GoogleAds\V17\Services\MutateOperationResponse;
use Google\Ads\GoogleAds\V17\Services\SearchGoogleAdsRequest;
use Google\ApiCore\ApiException;
use Google\ApiCore\Serializer;

/**
 * This example shows how to create a Performance Max retail campaign.
 *
 * This will be created for "All products".
 *
 * For more information about Performance Max retail campaigns, see
 * https://developers.google.com/google-ads/api/docs/performance-max/retail.
 *
 * Prerequisites:
 * - You need to have access to a Merchant Center account. You can find
 * instructions to create a Merchant Center account here:
 * https://support.google.com/merchants/answer/188924.
 * This account must be linked to your Google Ads account. The integration
 * instructions can be found at:
 * https://developers.google.com/google-ads/api/docs/shopping-ads/merchant-center
 * - You need your Google Ads account to track conversions. The different ways
 * to track conversions can be found here:
 * https://support.google.com/google-ads/answer/1722054.
 * - You must have at least one conversion action in the account. For more about conversion
 * actions, see
 * https://developers.google.com/google-ads/api/docs/conversions/overview#conversion_actions.
 */
class AddPerformanceMaxRetailCampaign
{
    private const CUSTOMER_ID = 'INSERT_CUSTOMER_ID_HERE';
    private const MERCHANT_CENTER_ACCOUNT_ID = 'INSERT_MERCHANT_CENTER_ACCOUNT_ID_HERE';
    private const SALES_COUNTRY = 'US';
    // The final URL for the generated ads. Must have the same domain as the Merchant Center
    // account.
    private const FINAL_URL = 'INSERT_FINAL_URL_HERE';

    // We specify temporary IDs that are specific to a single mutate request.
    // Temporary IDs are always negative and unique within one mutate request.
    //
    // See https://developers.google.com/google-ads/api/docs/mutating/best-practices
    // for further details.
    //
    // These temporary IDs are fixed because they are used in multiple places.
    private const BUDGET_TEMPORARY_ID = -1;
    private const PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID = -2;
    private const ASSET_GROUP_TEMPORARY_ID = -3;

    // There are also entities that will be created in the same request but do not need to be fixed
    // temporary IDs because they are referenced only once.
    /** @var int the negative temporary ID used in bulk mutates. */
    private static $nextTempId = self::ASSET_GROUP_TEMPORARY_ID - 1;

    public static function main()
    {
        // Either pass the required parameters for this example on the command line, or insert them
        // into the constants above.
        $options = (new ArgumentParser())->parseCommandArguments([
            ArgumentNames::CUSTOMER_ID => GetOpt::REQUIRED_ARGUMENT,
            ArgumentNames::MERCHANT_CENTER_ACCOUNT_ID => GetOpt::REQUIRED_ARGUMENT,
            ArgumentNames::FINAL_URL => GetOpt::REQUIRED_ARGUMENT
        ]);

        // Generate a refreshable OAuth2 credential for authentication.
        $oAuth2Credential = (new OAuth2TokenBuilder())->fromFile()->build();

        // Construct a Google Ads client configured from a properties file and the
        // OAuth2 credentials above.
        $googleAdsClient = (new GoogleAdsClientBuilder())
            ->fromFile()
            ->withOAuth2Credential($oAuth2Credential)
            // We set this value to true to show how to use GAPIC v2 source code. You can remove the
            // below line if you wish to use the old-style source code. Note that in that case, you
            // probably need to modify some parts of the code below to make it work.
            // For more information, see
            // https://developers.devsite.corp.google.com/google-ads/api/docs/client-libs/php/gapic.
            ->usingGapicV2Source(true)
            ->build();

        try {
            self::runExample(
                $googleAdsClient,
                $options[ArgumentNames::CUSTOMER_ID] ?: self::CUSTOMER_ID,
                $options[ArgumentNames::MERCHANT_CENTER_ACCOUNT_ID]
                    ?: self::MERCHANT_CENTER_ACCOUNT_ID,
                $options[ArgumentNames::SALES_COUNTRY] ?: self::SALES_COUNTRY,
                $options[ArgumentNames::FINAL_URL] ?: self::FINAL_URL
            );
        } catch (GoogleAdsException $googleAdsException) {
            printf(
                "Request with ID '%s' has failed.%sGoogle Ads failure details:%s",
                $googleAdsException->getRequestId(),
                PHP_EOL,
                PHP_EOL
            );
            foreach ($googleAdsException->getGoogleAdsFailure()->getErrors() as $error) {
                /** @var GoogleAdsError $error */
                printf(
                    "\t%s: %s%s",
                    $error->getErrorCode()->getErrorCode(),
                    $error->getMessage(),
                    PHP_EOL
                );
            }
            exit(1);
        } catch (ApiException $apiException) {
            printf(
                "ApiException was thrown with message '%s'.%s",
                $apiException->getMessage(),
                PHP_EOL
            );
            exit(1);
        }
    }

    /**
     * Runs the example.
     *
     * @param GoogleAdsClient $googleAdsClient the Google Ads API client
     * @param int $customerId the customer ID
     * @param int $merchantCenterAccountId the Merchant Center account ID
     * @param string $finalUrl the final URL for the asset group of the campaign
     */
    public static function runExample(
        GoogleAdsClient $googleAdsClient,
        int $customerId,
        int $merchantCenterAccountId,
        string $finalUrl
    ) {
        // This campaign will override the customer conversion goals.
        // Retrieves the current list of customer conversion goals.
        $customerConversionGoals = self::getCustomerConversionGoals(
            $googleAdsClient,
            $customerId
        );

        // Performance Max campaigns require that repeated assets such as headlines
        // and descriptions be created before the campaign.
        // For the list of required assets for a Performance Max campaign, see
        // https://developers.google.com/google-ads/api/docs/performance-max/assets.
        //
        // Creates the headlines.
        $headlineAssetResourceNames = self::createMultipleTextAssets(
            $googleAdsClient,
            $customerId,
            ["Travel", "Travel Reviews", "Book travel"]
        );
        // Creates the descriptions.
        $descriptionAssetResourceNames = self::createMultipleTextAssets(
            $googleAdsClient,
            $customerId,
            ["Take to the air!", "Fly to the sky!"]
        );

        // It's important to create the below entities in this order because they depend on
        // each other.
        $operations = [];
        // The below methods create and return MutateOperations that we later
        // provide to the GoogleAdsService.Mutate method in order to create the
        // entities in a single request. Since the entities for a Performance Max
        // campaign are closely tied to one-another, it's considered a best practice
        // to create them in a single Mutate request so they all complete
        // successfully or fail entirely, leaving no orphaned entities. See:
        // https://developers.google.com/google-ads/api/docs/mutating/overview.
        $operations[] = self::createCampaignBudgetOperation($customerId);
        $operations[] = self::createPerformanceMaxCampaignOperation(
            $customerId,
            $merchantCenterAccountId
        );
        $operations =
            array_merge($operations, self::createCampaignCriterionOperations($customerId));
        $operations[] = self::createAssetGroupOperation($customerId, $finalUrl);
        $operations[] = self::createAssetGroupListingGroupFilterOperation($customerId);
        $operations = array_merge($operations, self::createAssetandAssetGroupAssetOperations(
            $customerId,
            $headlineAssetResourceNames,
            $descriptionAssetResourceNames
        ));
        $operations = array_merge($operations, self::createConversionGoalOperations(
            $customerId,
            $customerConversionGoals
        ));

        // Issues a mutate request to create everything and prints its information.
        $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();
        $response = $googleAdsServiceClient->mutate(
            MutateGoogleAdsRequest::build($customerId, $operations)
        );

        self::printResponseDetails($response);
    }

    /**
     * Creates a MutateOperation that creates a new CampaignBudget.
     *
     * A temporary ID will be assigned to this campaign budget so that it can be
     * referenced by other objects being created in the same Mutate request.
     *
     * @param int $customerId the customer ID
     * @return MutateOperation the mutate operation that creates a campaign budget
     */
    private static function createCampaignBudgetOperation(int $customerId): MutateOperation
    {
        // Creates a mutate operation that creates a campaign budget operation.
        return new MutateOperation([
            'campaign_budget_operation' => new CampaignBudgetOperation([
                'create' => new CampaignBudget([
                    // Sets a temporary ID in the budget's resource name so it can be referenced
                    // by the campaign in later steps.
                    'resource_name' => ResourceNames::forCampaignBudget(
                        $customerId,
                        self::BUDGET_TEMPORARY_ID
                    ),
                    'name' => 'Performance Max retail campaign budget #' .
                        Helper::getPrintableDatetime(),
                    // The budget period already defaults to DAILY.
                    'amount_micros' => 50000000,
                    'delivery_method' => BudgetDeliveryMethod::STANDARD,
                    // A Performance Max campaign cannot use a shared campaign budget.
                    'explicitly_shared' => false
                ])
            ])
        ]);
    }

    /**
     * Creates a MutateOperation that creates a new Performance Max campaign.
     *
     * A temporary ID will be assigned to this campaign so that it can
     * be referenced by other objects being created in the same Mutate request.
     *
     * @param int $customerId the customer ID
     * @param int $merchantCenterAccountId the Merchant Center account ID
     * @return MutateOperation the mutate operation that creates the campaign
     */
    private static function createPerformanceMaxCampaignOperation(
        int $customerId,
        int $merchantCenterAccountId
    ): MutateOperation {
        // Creates a mutate operation that creates a campaign operation.
        return new MutateOperation([
            'campaign_operation' => new CampaignOperation([
                'create' => new Campaign([
                    'name' => 'Performance Max retail campaign #' . Helper::getPrintableDatetime(),
                    // Assigns the resource name with a temporary ID.
                    'resource_name' => ResourceNames::forCampaign(
                        $customerId,
                        self::PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                    ),
                    // Sets the budget using the given budget resource name.
                    'campaign_budget' => ResourceNames::forCampaignBudget(
                        $customerId,
                        self::BUDGET_TEMPORARY_ID
                    ),
                    // The campaign is the only entity in the mutate request that should have its
                    // status set.
                    // Recommendation: Set the campaign to PAUSED when creating it to prevent
                    // the ads from immediately serving.
                    'status' => CampaignStatus::PAUSED,
                    // All Performance Max campaigns have an advertising_channel_type of
                    // PERFORMANCE_MAX. The advertising_channel_sub_type should not be set.
                    'advertising_channel_type' => AdvertisingChannelType::PERFORMANCE_MAX,

                    // Bidding strategy must be set directly on the campaign.
                    // Setting a portfolio bidding strategy by resource name is not supported.
                    // Max Conversion and Max Conversion Value are the only strategies supported
                    // for Performance Max campaigns.
                    // An optional ROAS (Return on Advertising Spend) can be set for
                    // maximize_conversion_value. The ROAS value must be specified as a ratio in
                    // the API. It is calculated by dividing "total value" by "total spend".
                    // For more information on Max Conversion Value, see the support article:
                    // http://support.google.com/google-ads/answer/7684216.
                    // A target_roas of 3.5 corresponds to a 350% return on ad spend.
                    'maximize_conversion_value' => new MaximizeConversionValue([
                        'target_roas' => 3.5
                    ]),
                    // Below is what you would use if you want to maximize conversions
                    // You can optionally set the 'target_cpa_micros' field on MaximizeConversions.
                    // This is the average amount that you would like to spend per conversion
                    // action.
                    // 'maximize_conversions' => new MaximizeConversions(),

                    // Sets the Final URL expansion opt out. This flag is specific to
                    // Performance Max campaigns. If opted out (true), only the final URLs in
                    // the asset group or URLs specified in the advertiser's Google Merchant
                    // Center or business data feeds are targeted.
                    //
                    // If opted in (false), the entire domain will be targeted. For best
                    // results, set this value to false to opt in and allow URL expansions. You
                    // can optionally add exclusions to limit traffic to parts of your website.
                    //
                    // For a Retail campaign, we want the final URL's to be limited to those
                    // explicitly surfaced via GMC.
                    'url_expansion_opt_out' => true,

                    // Sets the shopping settings.
                    'shopping_setting' => new ShoppingSetting([
                        'merchant_id' => $merchantCenterAccountId,
                        // Optional: To use products only from a specific feed, set feed_label to
                        // the feed label used in Merchant Center.
                        // See: https://support.google.com/merchants/answer/12453549.
                        // Removing the feed_label field will use products from all feeds.
                        // 'feed_label' => 'INSERT_FEED_LABEL_HERE'
                    ]),

                    // Optional fields.
                    'start_date' => date('Ymd', strtotime('+1 day')),
                    'end_date' => date('Ymd', strtotime('+365 days'))
                ])
            ])
        ]);
    }

    /**
     * Creates a list of MutateOperations that create new campaign criteria.
     *
     * @param int $customerId the customer ID
     * @return MutateOperation[] a list of MutateOperations that create the new campaign criteria
     */
    private static function createCampaignCriterionOperations(int $customerId): array
    {
        $operations = [];
        // Sets the LOCATION campaign criteria.
        // Target all of New York City except Brooklyn.
        // Location IDs are listed here:
        // https://developers.google.com/google-ads/api/reference/data/geotargets
        // and they can also be retrieved using the GeoTargetConstantService as shown
        // here: https://developers.google.com/google-ads/api/docs/targeting/location-targeting
        $operations[] = new MutateOperation([
            'campaign_criterion_operation' => new CampaignCriterionOperation([
                'create' => new CampaignCriterion([
                    'campaign' => ResourceNames::forCampaign(
                        $customerId,
                        self::PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                    ),
                    'location' => new LocationInfo([
                        // Adds one positive location target for New York City (ID=1023191),
                        // specifically adding the positive criteria before the negative one.
                        'geo_target_constant' => ResourceNames::forGeoTargetConstant(1023191)
                    ]),
                    'negative' => false
                ])
            ])
        ]);

        // Next adds the negative target for Brooklyn.
        $operations[] = new MutateOperation([
            'campaign_criterion_operation' => new CampaignCriterionOperation([
                'create' => new CampaignCriterion([
                    'campaign' => ResourceNames::forCampaign(
                        $customerId,
                        self::PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                    ),
                    'location' => new LocationInfo([
                        // Next add the negative target for Brooklyn (ID=1022762).
                        'geo_target_constant' => ResourceNames::forGeoTargetConstant(1022762)
                    ]),
                    'negative' => true
                ])
            ])
        ]);

        // Sets the LANGUAGE campaign criterion.
        $operations[] = new MutateOperation([
            'campaign_criterion_operation' => new CampaignCriterionOperation([
                'create' => new CampaignCriterion([
                    'campaign' => ResourceNames::forCampaign(
                        $customerId,
                        self::PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                    ),
                    // Sets the language.
                    // For a list of all language codes, see:
                    // https://developers.google.com/google-ads/api/reference/data/codes-formats#expandable-7
                    'language' => new LanguageInfo([
                        'language_constant' => ResourceNames::forLanguageConstant(1000)  // English
                    ])
                ])
            ])
        ]);

        return $operations;
    }

    /**
     * Creates multiple text assets and returns the list of resource names.
     *
     * These repeated assets must be created in a separate request prior to creating the campaign.
     *
     * @param GoogleAdsClient $googleAdsClient the Google Ads API client
     * @param int $customerId the customer ID
     * @param string[] $texts a list of strings, each of which will be used to create a text asset
     * @return string[] a list of asset resource names
     */
    private static function createMultipleTextAssets(
        GoogleAdsClient $googleAdsClient,
        int $customerId,
        array $texts
    ): array {
        // Here again, we use the GoogleAdService to create multiple text assets in a single
        // request.
        $operations = [];
        foreach ($texts as $text) {
            // Creates a mutate operation for a text asset.
            $operations[] = new MutateOperation([
                'asset_operation' => new AssetOperation([
                    'create' => new Asset(['text_asset' => new TextAsset(['text' => $text])])
                ])
            ]);
        }

        // Issues a mutate request to add all assets.
        $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();
        /** @var MutateGoogleAdsResponse $mutateGoogleAdsResponse */
        $mutateGoogleAdsResponse = $googleAdsServiceClient->mutate(
            MutateGoogleAdsRequest::build($customerId, $operations)
        );

        $assetResourceNames = [];
        foreach ($mutateGoogleAdsResponse->getMutateOperationResponses() as $response) {
            /** @var MutateOperationResponse $response */
            $assetResourceNames[] = $response->getAssetResult()->getResourceName();
        }
        self::printResponseDetails($mutateGoogleAdsResponse);

        return $assetResourceNames;
    }

    /**
     * Creates a MutateOperation that creates a new asset group.
     *
     * A temporary ID will be assigned to this asset group so that it can
     * be referenced by other objects being created in the same Mutate request.
     *
     * @param int $customerId the customer ID
     * @return MutateOperation a mutate operation creates a new asset group.
     */
    private static function createAssetGroupOperation(
        int $customerId,
        string $finalUrl
    ): MutateOperation {
        // Creates a new mutate operation that creates an asset group operation.
        return new MutateOperation([
            'asset_group_operation' => new AssetGroupOperation([
                'create' => new AssetGroup([
                    'resource_name' => ResourceNames::forAssetGroup(
                        $customerId,
                        self::ASSET_GROUP_TEMPORARY_ID
                    ),
                    'name' => 'Performance Max retail asset group #' .
                        Helper::getPrintableDatetime(),
                    'campaign' => ResourceNames::forCampaign(
                        $customerId,
                        self::PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                    ),
                    'final_urls' => [$finalUrl],
                    'final_mobile_urls' => [$finalUrl],
                    'status' => AssetGroupStatus::PAUSED
                ])
            ])
        ]);
    }

    /**
     * Creates a MutateOperation that creates a new asset group listing group filter.
     *
     * A temporary ID will be assigned to this listing group filter so that it can be referenced by
     * other objects being created in the same Mutate request.
     *
     * @param int $customerId the customer ID
     * @return MutateOperation a MutateOperation that creates a new asset group listing group filter
     */
    private static function createAssetGroupListingGroupFilterOperation(
        int $customerId
    ): MutateOperation {
        return new MutateOperation([
            'asset_group_listing_group_filter_operation'
            => new AssetGroupListingGroupFilterOperation([
                // Creates a new asset group listing group filter containing the "default"
                // listing group (All products).
                'create' => new AssetGroupListingGroupFilter([
                    'asset_group' => ResourceNames::forAssetGroup(
                        $customerId,
                        self::ASSET_GROUP_TEMPORARY_ID
                    ),
                    // Since this is the root node, do not set the 'parent_listing_group_filter'
                    // field. For all other nodes, this would refer to the parent listing group
                    // filter resource name.
                    //
                    // UNIT_INCLUDED means this node has no children.
                    'type' => ListingGroupFilterType::UNIT_INCLUDED,
                    // Because this is a Performance Max campaign for retail, we need to specify
                    // that this is in the shopping listing source.
                    'listing_source' => ListingGroupFilterListingSource::SHOPPING
                ])
            ])
        ]);
    }

    /**
     * Creates a list of MutateOperations that create new asset group asset and assets.
     *
     * A temporary ID will be assigned to this asset group so that it can
     * be referenced by other objects being created in the same mutate request.
     *
     * @param int $customerId the customer ID
     * @param string[] $headlineAssetResourceNames a list of headline resource names
     * @param string[] $descriptionAssetResourceNames a list of description resource names
     * @return MutateOperation[] a list of MutateOperations that create new asset group assets and
     *     assets
     */
    private static function createAssetandAssetGroupAssetOperations(
        int $customerId,
        array $headlineAssetResourceNames,
        array $descriptionAssetResourceNames
    ): array {
        $operations = [];
        // For the list of required assets for a Performance Max campaign, see
        // https://developers.google.com/google-ads/api/docs/performance-max/assets

        // An AssetGroup is linked to an Asset by creating a new AssetGroupAsset
        // and providing:
        // -  the resource name of the AssetGroup
        // -  the resource name of the Asset
        // -  the field_type of the Asset in this AssetGroup.
        //
        // To learn more about AssetGroups, see
        // https://developers.google.com/google-ads/api/docs/performance-max/asset-groups.

        // Links the previously created multiple text assets.

        // Links the headline assets.
        foreach ($headlineAssetResourceNames as $resourceName) {
            $operations[] = new MutateOperation([
                'asset_group_asset_operation' => new AssetGroupAssetOperation([
                    'create' => new AssetGroupAsset([
                        'asset' => $resourceName,
                        'asset_group' => ResourceNames::forAssetGroup(
                            $customerId,
                            self::ASSET_GROUP_TEMPORARY_ID
                        ),
                        'field_type' => AssetFieldType::HEADLINE
                    ])
                ])
            ]);
        }
        // Links the description assets.
        foreach ($descriptionAssetResourceNames as $resourceName) {
            $operations[] = new MutateOperation([
                'asset_group_asset_operation' => new AssetGroupAssetOperation([
                    'create' => new AssetGroupAsset([
                        'asset' => $resourceName,
                        'asset_group' => ResourceNames::forAssetGroup(
                            $customerId,
                            self::ASSET_GROUP_TEMPORARY_ID
                        ),
                        'field_type' => AssetFieldType::DESCRIPTION
                    ])
                ])
            ]);
        }

        // Creates and links the long headline text asset.
        $operations = array_merge($operations, self::createAndLinkTextAsset(
            $customerId,
            'Travel the World',
            AssetFieldType::LONG_HEADLINE
        ));
        // Creates and links the business name text asset.
        $operations = array_merge($operations, self::createAndLinkTextAsset(
            $customerId,
            'Interplanetary Cruises',
            AssetFieldType::BUSINESS_NAME
        ));

        // Creates and links the image assets.

        // Creates and links the Logo Asset.
        $operations = array_merge($operations, self::createAndLinkImageAsset(
            $customerId,
            'https://gaagl.page.link/1Crm',
            AssetFieldType::LOGO,
            'Marketing Logo'
        ));
        // Creates and links the Marketing Image Asset.
        $operations = array_merge($operations, self::createAndLinkImageAsset(
            $customerId,
            'https://gaagl.page.link/Eit5',
            AssetFieldType::MARKETING_IMAGE,
            'Marketing Image'
        ));
        // Creates and links the Square Marketing Image Asset.
        $operations = array_merge($operations, self::createAndLinkImageAsset(
            $customerId,
            'https://gaagl.page.link/bjYi',
            AssetFieldType::SQUARE_MARKETING_IMAGE,
            'Square Marketing Image'
        ));

        // After being created the list must be sorted so that all asset operations come before all
        // the asset group asset operations, otherwise the API will reject the request.
        return self::sortAssetAndAssetGroupAssetOperations($operations);
    }

    /**
     * Creates a list of MutateOperations that create a new linked text asset.
     *
     * @param int $customerId the customer ID
     * @param string $text the text of the asset to be created
     * @param int $fieldType the field type of the new asset in the AssetGroupAsset
     * @return MutateOperation[] a list of MutateOperations that create a new linked text asset
     */
    private static function createAndLinkTextAsset(
        int $customerId,
        string $text,
        int $fieldType
    ): array {
        $operations = [];
        // Creates a new mutate operation that creates a text asset.
        $operations[] = new MutateOperation([
            'asset_operation' => new AssetOperation([
                'create' => new Asset([
                    'resource_name' => ResourceNames::forAsset($customerId, self::$nextTempId),
                    'text_asset' => new TextAsset(['text' => $text])
                ])
            ])
        ]);

        // Creates an asset group asset to link the asset to the asset group.
        $operations[] = new MutateOperation([
            'asset_group_asset_operation' => new AssetGroupAssetOperation([
                'create' => new AssetGroupAsset([
                    'asset' => ResourceNames::forAsset($customerId, self::$nextTempId),
                    'asset_group' => ResourceNames::forAssetGroup(
                        $customerId,
                        self::ASSET_GROUP_TEMPORARY_ID
                    ),
                    'field_type' => $fieldType
                ])
            ])
        ]);
        self::$nextTempId--;

        return $operations;
    }

    /**
     * Creates a list of MutateOperations that create a new linked image asset.
     *
     * @param int $customerId the customer ID
     * @param string $url the URL of the image to be retrieved and put into an asset
     * @param int $fieldType the field type of the new asset in the AssetGroupAsset
     * @param string $assetName the asset name
     * @return MutateOperation[] a list of MutateOperations that create a new linked image asset
     */
    private static function createAndLinkImageAsset(
        int $customerId,
        string $url,
        int $fieldType,
        string $assetName
    ): array {
        $operations = [];
        // Creates a new mutate operation that creates an image asset.
        $operations[] = new MutateOperation([
            'asset_operation' => new AssetOperation([
                'create' => new Asset([
                    'resource_name' => ResourceNames::forAsset($customerId, self::$nextTempId),
                    // Provide a unique friendly name to identify your asset.
                    // When there is an existing image asset with the same content but a different
                    // name, the new name will be dropped silently.
                    'name' => $assetName,
                    'image_asset' => new ImageAsset(['data' => file_get_contents($url)])
                ])
            ])
        ]);

        // Creates an asset group asset to link the asset to the asset group.
        $operations[] = new MutateOperation([
            'asset_group_asset_operation' => new AssetGroupAssetOperation([
                'create' => new AssetGroupAsset([
                    'asset' => ResourceNames::forAsset($customerId, self::$nextTempId),
                    'asset_group' => ResourceNames::forAssetGroup(
                        $customerId,
                        self::ASSET_GROUP_TEMPORARY_ID
                    ),
                    'field_type' => $fieldType
                ])
            ])
        ]);
        self::$nextTempId--;

        return $operations;
    }

    /**
     * Sorts a list of asset and asset group asset operations. This sorts the list such that all
     * asset operations precede all asset group asset operations. If asset group assets are created
     * before assets then an error will be returned by the API.
     *
     * @param MutateOperation[] $operations a list of asset and asset group asset mutate operations
     * @return MutateOperation[] a sorted list of asset and asset group asset mutate operations
     */
    private static function sortAssetAndAssetGroupAssetOperations(array $operations): array
    {
        usort(
            $operations,
            function (MutateOperation $operation1, MutateOperation $operation2) {
                if (!is_null($operation1->getAssetOperation())) {
                    return -1;
                } elseif (!is_null($operation1->getAssetOperation())) {
                    return 0;
                } else {
                    return 1;
                }
            }
        );
        return $operations;
    }


    /**
     * Retrieves the list of customer conversion goals.
     *
     * @param GoogleAdsClient $googleAdsClient the Google Ads API client
     * @param int $customerId the customer ID
     * @return array list of dicts containing the category and origin of customer conversion goals
     */
    private static function getCustomerConversionGoals(
        GoogleAdsClient $googleAdsClient,
        int $customerId
    ): array {
        $customerConversionGoals = [];
        $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();
        // Creates a query that retrieves all customer conversion goals.
        $query = 'SELECT customer_conversion_goal.category, customer_conversion_goal.origin ' .
            'FROM customer_conversion_goal';
        // The number of conversion goals is typically less than 50 so we use a search request
        // instead of search stream.
        $response =
            $googleAdsServiceClient->search(SearchGoogleAdsRequest::build($customerId, $query));

        // Iterates over all rows in all pages and builds the list of conversion goals.
        foreach ($response->iterateAllElements() as $googleAdsRow) {
            /** @var GoogleAdsRow $googleAdsRow */
            $customerConversionGoals[] = [
                'category' => $googleAdsRow->getCustomerConversionGoal()->getCategory(),
                'origin' => $googleAdsRow->getCustomerConversionGoal()->getOrigin()
            ];
        }

        return $customerConversionGoals;
    }

    /**
     * Creates a list of MutateOperations that override customer conversion goals.
     *
     * @param int $customerId the customer ID
     * @param array $customerConversionGoals the list of customer conversion goals that will be
     *      overridden
     * @return MutateOperation[] a list of MutateOperations that update campaign conversion goals
     */
    private static function createConversionGoalOperations(
        int $customerId,
        array $customerConversionGoals
    ): array {
        $operations = [];

        // To override the customer conversion goals, we will change the biddability of each of the
        // customer conversion goals so that only the desired conversion goal is biddable in this
        // campaign.
        foreach ($customerConversionGoals as $customerConversionGoal) {
            $campaignConversionGoal = new CampaignConversionGoal([
                'resource_name' => ResourceNames::forCampaignConversionGoal(
                    $customerId,
                    self::PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID,
                    ConversionActionCategory::name($customerConversionGoal['category']),
                    ConversionOrigin::name($customerConversionGoal['origin'])
                )
            ]);
            // Changes the biddability for the campaign conversion goal.
            // Sets biddability to true for the desired (category, origin).
            // Sets biddability to false for all other conversion goals.
            // Note:
            //  1- It is assumed that this Conversion Action
            //     (category=PURCHASE, origin=WEBSITE) exists in this account.
            //  2- More than one goal can be biddable if desired. This example
            //     shows only one.
            if (
                $customerConversionGoal["category"] === ConversionActionCategory::PURCHASE
                && $customerConversionGoal["origin"] === ConversionOrigin::WEBSITE
            ) {
                $campaignConversionGoal->setBiddable(true);
            } else {
                $campaignConversionGoal->setBiddable(false);
            }

            $operations[] = new MutateOperation([
                'campaign_conversion_goal_operation' => new CampaignConversionGoalOperation([
                    'update' => $campaignConversionGoal,
                    // Sets the update mask on the operation. Here the update mask will be a list
                    // of all the fields that were set on the update object.
                    'update_mask' => FieldMasks::allSetFieldsOf($campaignConversionGoal)
                ])
            ]);
        }

        return $operations;
    }

    /**
     * Prints the details of a MutateGoogleAdsResponse. Parses the "response" oneof field name and
     * uses it to extract the new entity's name and resource name.
     *
     * @param MutateGoogleAdsResponse $mutateGoogleAdsResponse the mutate Google Ads response
     */
    private static function printResponseDetails(
        MutateGoogleAdsResponse $mutateGoogleAdsResponse
    ): void {
        foreach ($mutateGoogleAdsResponse->getMutateOperationResponses() as $response) {
            /** @var MutateOperationResponse $response */
            $getter = Serializer::getGetter($response->getResponse());
            printf(
                "Created a(n) %s with '%s'.%s",
                preg_replace(
                    '/Result$/',
                    '',
                    ucfirst(Serializer::toCamelCase($response->getResponse()))
                ),
                $response->$getter()->getResourceName(),
                PHP_EOL
            );
        }
    }
}

AddPerformanceMaxRetailCampaign::main();
AddPerformanceMaxRetailCampaign.php
      

Python

#!/usr/bin/env python
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""This example shows how to create a Performance Max retail campaign.

This will be created for "All products".

For more information about Performance Max retail campaigns, see
https://developers.google.com/google-ads/api/docs/performance-max/retail

Prerequisites:
- You need to have access to a Merchant Center account. You can find
  instructions to create a Merchant Center account here:
  https://support.google.com/merchants/answer/188924.
  This account must be linked to your Google Ads account. The integration
  instructions can be found at:
  https://developers.google.com/google-ads/api/docs/shopping-ads/merchant-center
- You need your Google Ads account to track conversions. The different ways
  to track conversions can be found here:
  https://support.google.com/google-ads/answer/1722054.
- You must have at least one conversion action in the account. For
  more about conversion actions, see
  https://developers.google.com/google-ads/api/docs/conversions/overview#conversion_actions
"""


import argparse
from datetime import datetime, timedelta
import sys
from uuid import uuid4

from google.api_core import protobuf_helpers
from google.ads.googleads.client import GoogleAdsClient
from google.ads.googleads.errors import GoogleAdsException
from google.ads.googleads.util import convert_snake_case_to_upper_case

import requests


# We specify temporary IDs that are specific to a single mutate request.
# Temporary IDs are always negative and unique within one mutate request.
#
# See https://developers.google.com/google-ads/api/docs/mutating/best-practices
# for further details.
#
# These temporary IDs are fixed because they are used in multiple places.
_BUDGET_TEMPORARY_ID = "-1"
_PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID = "-2"
_ASSET_GROUP_TEMPORARY_ID = "-3"

# There are also entities that will be created in the same request but do not
# need to be fixed temporary IDs because they are referenced only once.
_next_temp_id = int(_ASSET_GROUP_TEMPORARY_ID) - 1


def main(
    client,
    customer_id,
    merchant_center_account_id,
    final_url,
):
    """The main method that creates all necessary entities for the example.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        merchant_center_account_id: The Merchant Center account ID.
        final_url: the final URL.
    """
    googleads_service = client.get_service("GoogleAdsService")

    # This campaign will override the customer conversion goals.
    # Retrieve the current list of customer conversion goals.
    customer_conversion_goals = get_customer_conversion_goals(
        client, customer_id
    )

    # Performance Max campaigns require that repeated assets such as headlines
    # and descriptions be created before the campaign.
    # For the list of required assets for a Performance Max campaign, see
    # https://developers.google.com/google-ads/api/docs/performance-max/assets
    #
    # Create the headlines.
    headline_asset_resource_names = create_multiple_text_assets(
        client,
        customer_id,
        [
            "Travel",
            "Travel Reviews",
            "Book travel",
        ],
    )
    # Create the descriptions.
    description_asset_resource_names = create_multiple_text_assets(
        client,
        customer_id,
        [
            "Take to the air!",
            "Fly to the sky!",
        ],
    )

    # The below methods create and return MutateOperations that we later
    # provide to the GoogleAdsService.Mutate method in order to create the
    # entities in a single request. Since the entities for a Performance Max
    # campaign are closely tied to one-another, it's considered a best practice
    # to create them in a single Mutate request so they all complete
    # successfully or fail entirely, leaving no orphaned entities. See:
    # https://developers.google.com/google-ads/api/docs/mutating/overview
    campaign_budget_operation = create_campaign_budget_operation(
        client,
        customer_id,
    )
    performance_max_campaign_operation = (
        create_performance_max_campaign_operation(
            client,
            customer_id,
            merchant_center_account_id,
        )
    )
    campaign_criterion_operations = create_campaign_criterion_operations(
        client,
        customer_id,
    )
    asset_group_operation = create_asset_group_operation(
        client, customer_id, final_url
    )
    listing_group_filter_operation = create_listing_group_filter_operation(
        client, customer_id
    )
    asset_and_asset_group_asset_operations = (
        create_asset_and_asset_group_asset_operations(
            client,
            customer_id,
            headline_asset_resource_names,
            description_asset_resource_names,
        )
    )
    conversion_goal_operations = create_conversion_goal_operations(
        client,
        customer_id,
        customer_conversion_goals,
    )

    # Send the operations in a single Mutate request.
    response = googleads_service.mutate(
        customer_id=customer_id,
        mutate_operations=[
            # It's important to create these entities in this order because
            # they depend on each other.
            campaign_budget_operation,
            performance_max_campaign_operation,
            # Expand the list of multiple operations into the list of
            # other mutate operations.
            *campaign_criterion_operations,
            asset_group_operation,
            listing_group_filter_operation,
            *asset_and_asset_group_asset_operations,
            *conversion_goal_operations,
        ],
    )
    print_response_details(response)


def create_campaign_budget_operation(
    client,
    customer_id,
):
    """Creates a MutateOperation that creates a new CampaignBudget.

    A temporary ID will be assigned to this campaign budget so that it can be
    referenced by other objects being created in the same Mutate request.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.

    Returns:
        a MutateOperation that creates a CampaignBudget.
    """
    mutate_operation = client.get_type("MutateOperation")
    campaign_budget_operation = mutate_operation.campaign_budget_operation
    campaign_budget = campaign_budget_operation.create
    campaign_budget.name = f"Performance Max retail campaign budget #{uuid4()}"
    # The budget period already defaults to DAILY.
    campaign_budget.amount_micros = 50000000
    campaign_budget.delivery_method = (
        client.enums.BudgetDeliveryMethodEnum.STANDARD
    )
    # A Performance Max campaign cannot use a shared campaign budget.
    campaign_budget.explicitly_shared = False

    # Set a temporary ID in the budget's resource name so it can be referenced
    # by the campaign in later steps.
    campaign_budget.resource_name = client.get_service(
        "CampaignBudgetService"
    ).campaign_budget_path(customer_id, _BUDGET_TEMPORARY_ID)

    return mutate_operation


def create_performance_max_campaign_operation(
    client,
    customer_id,
    merchant_center_account_id,
):
    """Creates a MutateOperation that creates a new Performance Max campaign.

    A temporary ID will be assigned to this campaign so that it can
    be referenced by other objects being created in the same Mutate request.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        merchant_center_account_id: The Merchant Center account ID.

    Returns:
        a MutateOperation that creates a campaign.
    """
    mutate_operation = client.get_type("MutateOperation")
    campaign = mutate_operation.campaign_operation.create
    campaign.name = f"Performance Max retail campaign #{uuid4()}"
    # Set the campaign status as PAUSED. The campaign is the only entity in
    # the mutate request that should have its status set.
    campaign.status = client.enums.CampaignStatusEnum.PAUSED
    # All Performance Max campaigns have an advertising_channel_type of
    # PERFORMANCE_MAX. The advertising_channel_sub_type should not be set.
    campaign.advertising_channel_type = (
        client.enums.AdvertisingChannelTypeEnum.PERFORMANCE_MAX
    )
    # Bidding strategy must be set directly on the campaign.
    # Setting a portfolio bidding strategy by resource name is not supported.
    # Max Conversion and Max Conversion Value are the only strategies supported
    # for Performance Max campaigns.
    # An optional ROAS (Return on Advertising Spend) can be set for
    # maximize_conversion_value. The ROAS value must be specified as a ratio in
    # the API. It is calculated by dividing "total value" by "total spend".
    # For more information on Max Conversion Value, see the support article:
    # http://support.google.com/google-ads/answer/7684216.
    # A target_roas of 3.5 corresponds to a 350% return on ad spend.
    # campaign.maximize_conversion_value.target_roas = 3.5
    # For first time users, it's recommended not to set a target ROAS.
    # Although target ROAS is optional, you still need to define it
    # even if you do not want to use it.
    campaign.maximize_conversion_value.target_roas = None
    # Below is what you would use if you want to maximize conversions
    # campaign.maximize_conversions.target_cpa_micros = None
    # The target CPA is optional. This is the average amount that you would
    # like to spend per conversion action.

    # Set the shopping settings.
    campaign.shopping_setting.merchant_id = merchant_center_account_id

    # Optional: To use products only from a specific feed, set
    # shopping_setting.feed_label to the feed label used in Merchant Center.
    # See: https://support.google.com/merchants/answer/12453549.
    # Omitting the shopping_setting.feed_label field will use products from all
    # feeds.
    # campaign.shopping_setting.feed_label = "INSERT_FEED_LABEL_HERE"

    # Set the Final URL expansion opt out. This flag is specific to
    # Performance Max campaigns. If opted out (True), only the final URLs in
    # the asset group or URLs specified in the advertiser's Google Merchant
    # If opted in (False), the entire domain will be targeted. For best
    # results, set this value to false to opt in and allow URL expansions. You
    # can optionally add exclusions to limit traffic to parts of your website.
    # For a Retail campaign, we want the final URL's to be limited to
    # those explicitly surfaced via GMC.
    campaign.url_expansion_opt_out = True

    # Assign the resource name with a temporary ID.
    campaign_service = client.get_service("CampaignService")
    campaign.resource_name = campaign_service.campaign_path(
        customer_id, _PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
    )
    # Set the budget using the given budget resource name.
    campaign.campaign_budget = campaign_service.campaign_budget_path(
        customer_id, _BUDGET_TEMPORARY_ID
    )

    # Optional fields
    campaign.start_date = (datetime.now() + timedelta(1)).strftime("%Y%m%d")
    campaign.end_date = (datetime.now() + timedelta(365)).strftime("%Y%m%d")

    return mutate_operation


def create_campaign_criterion_operations(
    client,
    customer_id,
):
    """Creates a list of MutateOperations that create new campaign criteria.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.

    Returns:
        a list of MutateOperations that create new campaign criteria.
    """
    campaign_service = client.get_service("CampaignService")
    geo_target_constant_service = client.get_service("GeoTargetConstantService")
    googleads_service = client.get_service("GoogleAdsService")

    operations = []
    # Set the LOCATION campaign criteria.
    # Target all of New York City except Brooklyn.
    # Location IDs are listed here:
    # https://developers.google.com/google-ads/api/reference/data/geotargets
    # and they can also be retrieved using the GeoTargetConstantService as shown
    # here: https://developers.google.com/google-ads/api/docs/targeting/location-targeting
    mutate_operation = client.get_type("MutateOperation")
    campaign_criterion = mutate_operation.campaign_criterion_operation.create
    campaign_criterion.campaign = campaign_service.campaign_path(
        customer_id, _PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
    )
    # Adds one positive location target for New York City (ID=1023191),
    # specifically adding the positive criteria before the negative one.
    campaign_criterion.location.geo_target_constant = (
        geo_target_constant_service.geo_target_constant_path("1023191")
    )
    campaign_criterion.negative = False
    operations.append(mutate_operation)

    # Next add the negative target for Brooklyn (ID=1022762).
    mutate_operation = client.get_type("MutateOperation")
    campaign_criterion = mutate_operation.campaign_criterion_operation.create
    campaign_criterion.campaign = campaign_service.campaign_path(
        customer_id, _PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
    )
    campaign_criterion.location.geo_target_constant = (
        geo_target_constant_service.geo_target_constant_path("1022762")
    )
    campaign_criterion.negative = True
    operations.append(mutate_operation)

    # Set the LANGUAGE campaign criterion.
    mutate_operation = client.get_type("MutateOperation")
    campaign_criterion = mutate_operation.campaign_criterion_operation.create
    campaign_criterion.campaign = campaign_service.campaign_path(
        customer_id, _PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
    )
    # Set the language.
    # For a list of all language codes, see:
    # https://developers.google.com/google-ads/api/reference/data/codes-formats#expandable-7
    campaign_criterion.language.language_constant = (
        googleads_service.language_constant_path("1000")
    )  # English
    operations.append(mutate_operation)

    return operations


def create_multiple_text_assets(client, customer_id, texts):
    """Creates multiple text assets and returns the list of resource names.

    These repeated assets must be created in a separate request prior to
    creating the campaign.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        texts: a list of strings, each of which will be used to create a text
          asset.

    Returns:
        asset_resource_names: a list of asset resource names.
    """
    # Here again we use the GoogleAdService to create multiple text
    # assets in a single request.
    googleads_service = client.get_service("GoogleAdsService")

    operations = []
    for text in texts:
        mutate_operation = client.get_type("MutateOperation")
        asset = mutate_operation.asset_operation.create
        asset.text_asset.text = text
        operations.append(mutate_operation)

    # Send the operations in a single Mutate request.
    response = googleads_service.mutate(
        customer_id=customer_id,
        mutate_operations=operations,
    )
    asset_resource_names = []
    for result in response.mutate_operation_responses:
        if result._pb.HasField("asset_result"):
            asset_resource_names.append(result.asset_result.resource_name)
    print_response_details(response)
    return asset_resource_names


def create_asset_group_operation(client, customer_id, final_url):
    """Creates a MutateOperation that creates a new asset group.

    A temporary ID will be assigned to this asset group so that it can
    be referenced by other objects being created in the same Mutate request.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        final_url: the final URL.

    Returns:
        a MutateOperation that creates a new asset group.
    """
    googleads_service = client.get_service("GoogleAdsService")
    # Create the AssetGroup.
    mutate_operation = client.get_type("MutateOperation")
    asset_group = mutate_operation.asset_group_operation.create
    asset_group.name = f"Performance Max retail asset group #{uuid4()}"
    asset_group.campaign = googleads_service.campaign_path(
        customer_id, _PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
    )
    asset_group.final_urls.append(final_url)
    asset_group.final_mobile_urls.append(final_url)
    asset_group.status = client.enums.AssetGroupStatusEnum.PAUSED
    asset_group.resource_name = googleads_service.asset_group_path(
        customer_id,
        _ASSET_GROUP_TEMPORARY_ID,
    )

    return mutate_operation


def create_listing_group_filter_operation(client, customer_id):
    """Creates a MutateOperation that creates a new listing group filter.

    A temporary ID will be assigned to this listing group filter so that it
    can be referenced by other objects being created in the same Mutate request.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.

    Returns:
        a MutateOperation that creates a new listing group filter.
    """
    googleads_service = client.get_service("GoogleAdsService")
    # Creates a new ad group criterion containing the "default" listing
    # group (All products).
    mutate_operation = client.get_type("MutateOperation")
    asset_group_listing_group = (
        mutate_operation.asset_group_listing_group_filter_operation.create
    )
    asset_group_listing_group.asset_group = googleads_service.asset_group_path(
        customer_id,
        _ASSET_GROUP_TEMPORARY_ID,
    )
    asset_group_listing_group.type_ = (
        client.enums.ListingGroupFilterTypeEnum.UNIT_INCLUDED
    )
    # Because this is a Performance Max campaign for retail, we need to specify
    # that this is in the shopping listing source.
    asset_group_listing_group.listing_source = (
        client.enums.ListingGroupFilterListingSourceEnum.SHOPPING
    )

    return mutate_operation


def create_asset_and_asset_group_asset_operations(
    client,
    customer_id,
    headline_asset_resource_names,
    description_asset_resource_names,
):
    """Creates a list of MutateOperations that create a new asset_group.

    A temporary ID will be assigned to this asset group so that it can
    be referenced by other objects being created in the same Mutate request.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        headline_asset_resource_names: a list of headline resource names.
        description_asset_resource_names: a list of description resource names.

    Returns:
        MutateOperations that create a new asset group and related assets.
    """
    asset_group_service = client.get_service("AssetGroupService")

    operations = []

    # For the list of required assets for a Performance Max campaign, see
    # https://developers.google.com/google-ads/api/docs/performance-max/assets

    # An AssetGroup is linked to an Asset by creating a new AssetGroupAsset
    # and providing:
    #   the resource name of the AssetGroup
    #   the resource name of the Asset
    #   the field_type of the Asset in this AssetGroup.
    #
    # To learn more about AssetGroups, see
    # https://developers.google.com/google-ads/api/docs/performance-max/asset-groups

    # Link the previously created multiple text assets.

    # Link the headline assets.
    for resource_name in headline_asset_resource_names:
        mutate_operation = client.get_type("MutateOperation")
        asset_group_asset = mutate_operation.asset_group_asset_operation.create
        asset_group_asset.field_type = client.enums.AssetFieldTypeEnum.HEADLINE
        asset_group_asset.asset_group = asset_group_service.asset_group_path(
            customer_id,
            _ASSET_GROUP_TEMPORARY_ID,
        )
        asset_group_asset.asset = resource_name
        operations.append(mutate_operation)

    #  Link the description assets.
    for resource_name in description_asset_resource_names:
        mutate_operation = client.get_type("MutateOperation")
        asset_group_asset = mutate_operation.asset_group_asset_operation.create
        asset_group_asset.field_type = (
            client.enums.AssetFieldTypeEnum.DESCRIPTION
        )
        asset_group_asset.asset_group = asset_group_service.asset_group_path(
            customer_id,
            _ASSET_GROUP_TEMPORARY_ID,
        )
        asset_group_asset.asset = resource_name
        operations.append(mutate_operation)

    # Create and link the long headline text asset.
    mutate_operations = create_and_link_text_asset(
        client,
        customer_id,
        "Travel the World",
        client.enums.AssetFieldTypeEnum.LONG_HEADLINE,
    )
    operations.extend(mutate_operations)

    # Create and link the business name text asset.
    mutate_operations = create_and_link_text_asset(
        client,
        customer_id,
        "Interplanetary Cruises",
        client.enums.AssetFieldTypeEnum.BUSINESS_NAME,
    )
    operations.extend(mutate_operations)

    # Create and link the image assets.

    # Create and link the Logo Asset.
    mutate_operations = create_and_link_image_asset(
        client,
        customer_id,
        "https://gaagl.page.link/1Crm",
        client.enums.AssetFieldTypeEnum.LOGO,
        "Logo Image",
    )
    operations.extend(mutate_operations)

    # Create and link the Marketing Image Asset.
    mutate_operations = create_and_link_image_asset(
        client,
        customer_id,
        "https://gaagl.page.link/Eit5",
        client.enums.AssetFieldTypeEnum.MARKETING_IMAGE,
        "Marketing Image",
    )
    operations.extend(mutate_operations)

    # Create and link the Square Marketing Image Asset.
    mutate_operations = create_and_link_image_asset(
        client,
        customer_id,
        "https://gaagl.page.link/bjYi",
        client.enums.AssetFieldTypeEnum.SQUARE_MARKETING_IMAGE,
        "Square Marketing Image",
    )
    operations.extend(mutate_operations)

    # After being created the list must be sorted so that all asset
    # operations come before all the asset group asset operations,
    # otherwise the API will reject the request.
    return sort_asset_and_asset_group_asset_operations(operations)


def create_and_link_text_asset(client, customer_id, text, field_type):
    """Creates a list of MutateOperations that create a new linked text asset.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        text: the text of the asset to be created.
        field_type: the field_type of the new asset in the AssetGroupAsset.

    Returns:
        MutateOperations that create a new linked text asset.
    """
    global _next_temp_id
    operations = []
    asset_service = client.get_service("AssetService")
    asset_group_service = client.get_service("AssetGroupService")

    # Create the Text Asset.
    mutate_operation = client.get_type("MutateOperation")
    asset = mutate_operation.asset_operation.create
    asset.resource_name = asset_service.asset_path(customer_id, _next_temp_id)
    asset.text_asset.text = text
    operations.append(mutate_operation)

    # Create an AssetGroupAsset to link the Asset to the AssetGroup.
    mutate_operation = client.get_type("MutateOperation")
    asset_group_asset = mutate_operation.asset_group_asset_operation.create
    asset_group_asset.field_type = field_type
    asset_group_asset.asset_group = asset_group_service.asset_group_path(
        customer_id,
        _ASSET_GROUP_TEMPORARY_ID,
    )
    asset_group_asset.asset = asset_service.asset_path(
        customer_id, _next_temp_id
    )
    operations.append(mutate_operation)

    _next_temp_id -= 1
    return operations


def create_and_link_image_asset(
    client, customer_id, url, field_type, asset_name
):
    """Creates a list of MutateOperations that create a new linked image asset.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        url: the url of the image to be retrieved and put into an asset.
        field_type: the field_type of the new asset in the AssetGroupAsset.
        asset_name: the asset name.

    Returns:
        MutateOperations that create a new linked image asset.
    """
    global _next_temp_id
    operations = []
    asset_service = client.get_service("AssetService")
    asset_group_service = client.get_service("AssetGroupService")

    # Create the Image Asset.
    mutate_operation = client.get_type("MutateOperation")
    asset = mutate_operation.asset_operation.create
    asset.resource_name = asset_service.asset_path(customer_id, _next_temp_id)
    asset.type_ = client.enums.AssetTypeEnum.IMAGE
    # Provide a unique friendly name to identify your asset.
    # When there is an existing image asset with the same content but a different
    # name, the new name will be dropped silently.
    asset.name = asset_name
    asset.image_asset.data = get_image_bytes(url)
    operations.append(mutate_operation)

    # Create an AssetGroupAsset to link the Asset to the AssetGroup.
    mutate_operation = client.get_type("MutateOperation")
    asset_group_asset = mutate_operation.asset_group_asset_operation.create
    asset_group_asset.field_type = field_type
    asset_group_asset.asset_group = asset_group_service.asset_group_path(
        customer_id,
        _ASSET_GROUP_TEMPORARY_ID,
    )
    asset_group_asset.asset = asset_service.asset_path(
        customer_id, _next_temp_id
    )
    operations.append(mutate_operation)

    _next_temp_id -= 1
    return operations


def sort_asset_and_asset_group_asset_operations(operations):
    """Sorts a list of asset and asset group asset operations.

    This sorts the list such that all asset operations precede
    all asset group asset operations. If asset group assets are
    created before assets then an error will be returned by
    the API.

    Args:
        operations: a list of asset and asset group asset operations.

    Returns:
        a sorted list of asset and asset group asset operations.
    """

    def sorter(operation):
        """Determines whether the operation creates an asset group asset.

        Args:
            operation: a MutateOperation instance.

        Returns:
            True if the MutateOperation creates an asset group asset.
        """
        return bool(operation.asset_group_asset_operation)

    return sorted(operations, key=sorter)


def get_customer_conversion_goals(client, customer_id):
    """Retrieves the list of customer conversion goals.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.

    Returns:
        a list of dicts containing the category and origin of customer
        conversion goals.
    """
    ga_service = client.get_service("GoogleAdsService")
    customer_conversion_goals = []
    query = """
            SELECT
              customer_conversion_goal.category,
              customer_conversion_goal.origin
            FROM customer_conversion_goal
            """
    # The number of conversion goals is typically less than 50 so we use
    # GoogleAdsService.search instead of search_stream.
    search_request = client.get_type("SearchGoogleAdsRequest")
    search_request.customer_id = customer_id
    search_request.query = query
    results = ga_service.search(request=search_request)

    # Iterate over the results and build the list of conversion goals.
    for row in results:
        customer_conversion_goals.append(
            {
                "category": row.customer_conversion_goal.category,
                "origin": row.customer_conversion_goal.origin,
            }
        )
    return customer_conversion_goals


def create_conversion_goal_operations(
    client,
    customer_id,
    customer_conversion_goals,
):
    """Creates a list of MutateOperations that override customer conversion goals.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        customer_conversion_goals: the list of customer conversion goals that
          will be overridden.

    Returns:
        MutateOperations that update campaign conversion goals.
    """
    campaign_conversion_goal_service = client.get_service(
        "CampaignConversionGoalService"
    )
    operations = []

    # To override the customer conversion goals, we will change the
    # biddability of each of the customer conversion goals so that only
    # the desired conversion goal is biddable in this campaign.
    for customer_conversion_goal in customer_conversion_goals:
        mutate_operation = client.get_type("MutateOperation")
        campaign_conversion_goal = (
            mutate_operation.campaign_conversion_goal_operation.update
        )

        campaign_conversion_goal.resource_name = (
            campaign_conversion_goal_service.campaign_conversion_goal_path(
                customer_id,
                _PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID,
                customer_conversion_goal["category"].name,
                customer_conversion_goal["origin"].name,
            )
        )
        # Change the biddability for the campaign conversion goal.
        # Set biddability to True for the desired (category, origin).
        # Set biddability to False for all other conversion goals.
        # Note:
        #  1- It is assumed that this Conversion Action
        #     (category=PURCHASE, origin=WEBSITE) exists in this account.
        #  2- More than one goal can be biddable if desired. This example
        #     shows only one.
        if (
            customer_conversion_goal["category"]
            == client.enums.ConversionActionCategoryEnum.PURCHASE
            and customer_conversion_goal["origin"]
            == client.enums.ConversionOriginEnum.WEBSITE
        ):
            biddable = True
        else:
            biddable = False
        campaign_conversion_goal.biddable = biddable
        field_mask = protobuf_helpers.field_mask(
            None, campaign_conversion_goal._pb
        )
        client.copy_from(
            mutate_operation.campaign_conversion_goal_operation.update_mask,
            field_mask,
        )
        operations.append(mutate_operation)

    return operations


def get_image_bytes(url):
    """Loads image data from a URL.

    Args:
        url: a URL str.

    Returns:
        Images bytes loaded from the given URL.
    """
    response = requests.get(url)
    return response.content


def print_response_details(response):
    """Prints the details of a MutateGoogleAdsResponse.

    Parses the "response" oneof field name and uses it to extract the new
    entity's name and resource name.

    Args:
        response: a MutateGoogleAdsResponse object.
    """
    # Parse the Mutate response to print details about the entities that
    # were created by the request.
    suffix = "_result"
    for result in response.mutate_operation_responses:
        for field_descriptor, value in result._pb.ListFields():
            if field_descriptor.name.endswith(suffix):
                name = field_descriptor.name[: -len(suffix)]
            else:
                name = field_descriptor.name
            print(
                f"Created a(n) {convert_snake_case_to_upper_case(name)} with "
                f"{str(value).strip()}."
            )



if __name__ == "__main__":
    parser = argparse.ArgumentParser(
        description=("Creates a Performance Max retail campaign.")
    )
    # The following argument(s) should be provided to run the example.
    parser.add_argument(
        "-c",
        "--customer_id",
        type=str,
        required=True,
        help="The Google Ads customer ID.",
    )
    parser.add_argument(
        "-m",
        "--merchant_center_account_id",
        type=int,
        required=True,
        help="The Merchant Center account ID.",
    )
    parser.add_argument(
        "-u",
        "--final_url",
        type=str,
        required=False,
        default="http://www.example.com",
        help="The final URL for the asset group of the campaign.",
    )

    args = parser.parse_args()

    # GoogleAdsClient will read the google-ads.yaml configuration file in the
    # home directory if none is specified.
    googleads_client = GoogleAdsClient.load_from_storage(version="v17")

    try:
        main(
            googleads_client,
            args.customer_id,
            args.merchant_center_account_id,
            args.final_url,
        )
    except GoogleAdsException as ex:
        print(
            f'Request with ID "{ex.request_id}" failed with status '
            f'"{ex.error.code().name}" and includes the following errors:'
        )
        for error in ex.failure.errors:
            print(f'Error with message "{error.message}".')
            if error.location:
                for field_path_element in error.location.field_path_elements:
                    print(f"\t\tOn field: {field_path_element.field_name}")
        sys.exit(1)
add_performance_max_retail_campaign.py
      

Ruby

#!/usr/bin/env ruby
# Encoding: utf-8
#
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# This example shows how to create a Performance Max retail campaign.
#
# This will be created for "All products".
#
# For more information about Performance Max retail campaigns, see
# https://developers.google.com/google-ads/api/docs/performance-max/retail
#
# Prerequisites:
# - You need to have access to a Merchant Center account. You can find
#   instructions to create a Merchant Center account here:
#   https://support.google.com/merchants/answer/188924.
#   This account must be linked to your Google Ads account. The integration
#   instructions can be found at:
#   https://developers.google.com/google-ads/api/docs/shopping-ads/merchant-center
# - You need your Google Ads account to track conversions. The different ways
#   to track conversions can be found here:
#   https://support.google.com/google-ads/answer/1722054.
# - You must have at least one conversion action in the account. For
#   more about conversion actions, see
#   https://developers.google.com/google-ads/api/docs/conversions/overview#conversion_actions


require 'optparse'
require 'date'
require 'open-uri'
require 'google/ads/google_ads'

# We specify temporary IDs that are specific to a single mutate request.
# Temporary IDs are always negative and unique within one mutate request.
#
# See https://developers.google.com/google-ads/api/docs/mutating/best-practices
# for further details.
#
# These temporary IDs are fixed because they are used in multiple places.
BUDGET_TEMPORARY_ID = "-1"
PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID = "-2"
ASSET_GROUP_TEMPORARY_ID = "-3"

# There are also entities that will be created in the same request but do not
# need to be fixed temporary IDs because they are referenced only once.
def next_temp_id
  @id ||= ASSET_GROUP_TEMPORARY_ID.to_i
  @id -= 1
end

def add_performance_max_retail_campaign(
    customer_id,
    merchant_center_account_id,
    final_url)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new

  # This campaign will override the customer conversion goals.
  # Retrieve the current list of customer conversion goals.
  customer_conversion_goals = _get_customer_conversion_goals(
      client, customer_id)

  # Performance Max campaigns require that repeated assets such as headlines
  # and descriptions be created before the campaign.
  # For the list of required assets for a Performance Max campaign, see
  # https://developers.google.com/google-ads/api/docs/performance-max/assets
  #
  # Create the headlines.
  headline_asset_resource_names = create_multiple_text_assets(
    client,
    customer_id,
    [
      "Travel",
      "Travel Reviews",
      "Book travel",
    ])
  # Create the descriptions.
  description_asset_resource_names = create_multiple_text_assets(
    client,
    customer_id,
    [
      "Take to the air!",
      "Fly to the sky!",
    ])

  # The below methods create and return MutateOperations that we later
  # provide to the GoogleAdsService.Mutate method in order to create the
  # entities in a single request. Since the entities for a Performance Max
  # campaign are closely tied to one-another, it's considered a best practice
  # to create them in a single Mutate request so they all complete
  # successfully or fail entirely, leaving no orphaned entities. See:
  # https://developers.google.com/google-ads/api/docs/mutating/overview
  campaign_budget_operation = create_campaign_budget_operation(
    client,
    customer_id,
  )
  performance_max_campaign_operation = create_performance_max_campaign_operation(
    client,
    customer_id,
    merchant_center_account_id,
  )
  campaign_criterion_operations = create_campaign_criterion_operations(
    client,
    customer_id,
  )
  asset_group_operation = create_asset_group_operation(
    client,
    customer_id,
    final_url,
  )
  listing_group_filter_operation = create_listing_group_filter_operation(
    client,
    customer_id,
  )
  asset_and_asset_group_asset_operations = create_asset_and_asset_group_asset_operations(
    client,
    customer_id,
    headline_asset_resource_names,
    description_asset_resource_names,
  )
  conversion_goal_operations = create_conversion_goal_operations(
    client,
    customer_id,
    customer_conversion_goals,
  )

  # Send the operations in a single Mutate request.
  response = client.service.google_ads.mutate(
    customer_id: customer_id,
    mutate_operations: [
      # It's important to create these entities in this order because
      # they depend on each other.
      campaign_budget_operation,
      performance_max_campaign_operation,
      # Expand the list of multiple operations into the list of
      # other mutate operations
      campaign_criterion_operations,
      asset_group_operation,
      listing_group_filter_operation,
      asset_and_asset_group_asset_operations,
      conversion_goal_operations,
    ].flatten)

  print_response_details(response)
end

# Creates a MutateOperation that creates a new CampaignBudget.
#
# A temporary ID will be assigned to this campaign budget so that it can be
# referenced by other objects being created in the same Mutate request.
def create_campaign_budget_operation(client, customer_id)
    client.operation.mutate do |m|
      m.campaign_budget_operation = client.operation.create_resource.campaign_budget do |cb|
        cb.name = "Performance Max campaign budget #{SecureRandom.uuid}"
        # The budget period already defaults to DAILY.
        cb.amount_micros = 50_000_000
        cb.delivery_method = :STANDARD
          # A Performance Max campaign cannot use a shared campaign budget.
          cb.explicitly_shared = false

        # Set a temporary ID in the budget's resource name so it can be referenced
        # by the campaign in later steps.
        cb.resource_name = client.path.campaign_budget(customer_id, BUDGET_TEMPORARY_ID)
      end
    end
  end

# Creates a MutateOperation that creates a new Performance Max campaign.
#
# A temporary ID will be assigned to this campaign so that it can
# be referenced by other objects being created in the same Mutate request.
def create_performance_max_campaign_operation(
    client,
    customer_id,
    merchant_center_account_id)
    client.operation.mutate do |m|
      m.campaign_operation = client.operation.create_resource.campaign do |c|
        c.name = "Performance Max retail campaign #{SecureRandom.uuid}"
        # Set the campaign status as PAUSED. The campaign is the only entity in
        # the mutate request that should have its status set.
        c.status = :PAUSED
        # All Performance Max campaigns have an advertising_channel_type of
        # PERFORMANCE_MAX. The advertising_channel_sub_type should not be set.
        c.advertising_channel_type = :PERFORMANCE_MAX
        # Bidding strategy must be set directly on the campaign.
        # Setting a portfolio bidding strategy by resource name is not supported.
        # Max Conversion and Maximize Conversion Value are the only strategies
        # supported for Performance Max campaigns.
        # An optional ROAS (Return on Advertising Spend) can be set for
        # maximize_conversion_value. The ROAS value must be specified as a ratio in
        # the API. It is calculated by dividing "total value" by "total spend".
        # For more information on Maximize Conversion Value, see the support
        # article: http://support.google.com/google-ads/answer/7684216.
        # A target_roas of 3.5 corresponds to a 350% return on ad spend.
        c.bidding_strategy_type = :MAXIMIZE_CONVERSION_VALUE
        c.maximize_conversion_value = client.resource.maximize_conversion_value do |mcv|
          mcv.target_roas = 3.5
        end

        # Set the shopping settings.
        c.shopping_setting = client.resource.shopping_setting do |ss|
            ss.merchant_id = merchant_center_account_id
            # Optional: To use products only from a specific feed, set feed_label
            # to the feed label used in Merchant Center.
            # See: https://support.google.com/merchants/answer/12453549.
            # Omitting the feed_label field will use products from all feeds.
            # feed_label = "INSERT_FEED_LABEL_HERE"
        end

        # Set the Final URL expansion opt out. This flag is specific to
        # Performance Max campaigns. If opted out (true), only the final URLs in
        # the asset group or URLs specified in the advertiser's Google Merchant
        # Center or business data feeds are targeted.
        # If opted in (false), the entire domain will be targeted. For best
        # results, set this value to false to opt in and allow URL expansions. You
        # can optionally add exclusions to limit traffic to parts of your website.
        #
        # For a Retail campaign, we want the final URLs to be limited to those
        # explicitly surfaced via GMC.
        c.url_expansion_opt_out = true

        # Assign the resource name with a temporary ID.
        c.resource_name = client.path.campaign(customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID)
        # Set the budget using the given budget resource name.
        c.campaign_budget = client.path.campaign_budget(customer_id, BUDGET_TEMPORARY_ID)

        # Optional fields
        c.start_date = DateTime.parse((Date.today + 1).to_s).strftime('%Y%m%d')
        c.end_date = DateTime.parse(Date.today.next_year.to_s).strftime('%Y%m%d')
      end
    end
  end

# Creates a list of MutateOperations that create new campaign criteria.
def create_campaign_criterion_operations(client, customer_id)
    operations = []

    # Set the LOCATION campaign criteria.
    # Target all of New York City except Brooklyn.
    # Location IDs are listed here:
    # https://developers.google.com/google-ads/api/reference/data/geotargets
    # and they can also be retrieved using the GeoTargetConstantService as shown
    # here: https://developers.google.com/google-ads/api/docs/targeting/location-targeting
    operations << client.operation.mutate do |m|
      m.campaign_criterion_operation =
        client.operation.create_resource.campaign_criterion do |cc|
        cc.campaign = client.path.campaign(
          customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID)
        # Adds one positive location target for New York City (ID=1023191),
        # specifically adding the positive criteria before the negative one.
        cc.location = client.resource.location_info do  |li|
          li.geo_target_constant = client.path.geo_target_constant("1023191")
        end
        cc.negative = false
      end
    end

  # Next add the negative target for Brooklyn (ID=1022762).
  operations << client.operation.mutate do |m|
    m.campaign_criterion_operation =
      client.operation.create_resource.campaign_criterion do |cc|
      cc.campaign = client.path.campaign(
        customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID)
      cc.location = client.resource.location_info do  |li|
        li.geo_target_constant = client.path.geo_target_constant("1022762")
      end
      cc.negative = true
    end
  end

  # Set the LANGUAGE campaign criterion.
  operations << client.operation.mutate do |m|
    m.campaign_criterion_operation =
      client.operation.create_resource.campaign_criterion do |cc|
      cc.campaign = client.path.campaign(
        customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID)
      # Set the language.
      # For a list of all language codes, see:
      # https://developers.google.com/google-ads/api/reference/data/codes-formats#expandable-7
      cc.language = client.resource.language_info do |li|
        li.language_constant = client.path.language_constant("1000")  # English
      end
    end
  end

  operations
end

# Creates multiple text assets and returns the list of resource names.
# These repeated assets must be created in a separate request prior to creating
# the campaign.
def create_multiple_text_assets(client, customer_id, texts)
  operations = texts.map do |text|
    client.operation.mutate do |m|
      m.asset_operation = client.operation.create_resource.asset do |asset|
        asset.text_asset = client.resource.text_asset do |text_asset|
          text_asset.text = text
        end
      end
    end
  end

  # Send the operations in a single Mutate request.
  response = client.service.google_ads.mutate(
    customer_id: customer_id,
    mutate_operations: operations,
  )

  asset_resource_names = []
  response.mutate_operation_responses.each do |result|
    if result.asset_result
      asset_resource_names.append(result.asset_result.resource_name)
    end
  end
  print_response_details(response)
  asset_resource_names
end

# Creates a MutateOperation that creates a new asset_group.
#
# A temporary ID will be assigned to this asset group so that it can
# be referenced by other objects being created in the same Mutate request.
def create_asset_group_operation(
    client,
    customer_id,
    final_url)

  # Create the AssetGroup
  client.operation.mutate do |m|
    m.asset_group_operation = client.operation.create_resource.asset_group do |ag|
      ag.name = "Performance Max retail asset group #{SecureRandom.uuid}"
      ag.campaign = client.path.campaign(
        customer_id,
        PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID)
      ag.final_urls << final_url
      ag.final_mobile_urls << final_url
      ag.status = :PAUSED
      ag.resource_name = client.path.asset_group(
        customer_id,
        ASSET_GROUP_TEMPORARY_ID,
      )
    end
  end
end

# Creates a MutateOperation that creates a new listing group filter.
# A temporary ID will be assigned to this listing group filter so that it can
# be referenced by other objects being created in the same Mutate request.
def create_listing_group_filter_operation(client, customer_id)
  client.operation.mutate do |m|
    m.asset_group_listing_group_filter_operation =
      client.operation.create_resource.asset_group_listing_group_filter do |aglg|
        aglg.asset_group = client.path.asset_group(
          customer_id,
          ASSET_GROUP_TEMPORARY_ID,
        )
        aglg.type = :UNIT_INCLUDED
        # Because this is a Performance Max campaign for retail, we need to
        # specify that this is in the shopping listing source.
        aglg.listing_source = :SHOPPING
      end
  end
end

# Creates a list of MutateOperations that create a new asset_group.
# A temporary ID will be assigned to this asset group so that it can be
# referenced by other objects being created in the same Mutate request.
def create_asset_and_asset_group_asset_operations(
  client,
  customer_id,
  headline_asset_resource_names,
  description_asset_resource_names)
  operations = []
  # For the list of required assets for a Performance Max campaign, see
  # https://developers.google.com/google-ads/api/docs/performance-max/assets
  #
  # An AssetGroup is linked to an Asset by creating a new AssetGroupAsset
  # and providing:
  #   the resource name of the AssetGroup
  #   the resource name of the Asset
  #   the field_type of the Asset in this AssetGroup.
  #
  # To learn more about AssetGroups, see
  # https://developers.google.com/google-ads/api/docs/performance-max/asset-groups

  # Link the previously created multiple text assets.

  # Link the headline assets.
  headline_asset_resource_names.each do |resource_name|
    operations << client.operation.mutate do |m|
      m.asset_group_asset_operation = client.operation.create_resource
          .asset_group_asset do |aga|
        aga.field_type = :HEADLINE
        aga.asset_group = client.path.asset_group(
          customer_id,
          ASSET_GROUP_TEMPORARY_ID)
        aga.asset = resource_name
      end
    end
  end

  #  Link the description assets.
  description_asset_resource_names.each do |resource_name|
    operations << client.operation.mutate do |m|
      m.asset_group_asset_operation = client.operation.create_resource
          .asset_group_asset do |aga|
        aga.field_type = :DESCRIPTION
        aga.asset_group = client.path.asset_group(
          customer_id,
          ASSET_GROUP_TEMPORARY_ID)
        aga.asset = resource_name
      end
    end
  end

  # Create and link the long headline text asset.
  operations += create_and_link_text_asset(
    client,
    customer_id,
    "Travel the World",
    :LONG_HEADLINE)

  # Create and link the business name text asset.
  operations += create_and_link_text_asset(
    client,
    customer_id,
    "Interplanetary Cruises",
    :BUSINESS_NAME)

  # Create and link the image assets.

  # Create and link the Logo Asset.
  operations += create_and_link_image_asset(
    client,
    customer_id,
    "https://gaagl.page.link/1Crm",
    :LOGO,
    "Logo Image")

  # Create and link the Marketing Image Asset.
  operations += create_and_link_image_asset(
    client,
    customer_id,
    "https://gaagl.page.link/Eit5",
    :MARKETING_IMAGE,
    "Marketing Image")

  # Create and link the Square Marketing Image Asset.
  operations += create_and_link_image_asset(
    client,
    customer_id,
    "https://gaagl.page.link/bjYi",
    :SQUARE_MARKETING_IMAGE,
    "Square Marketing Image")

  # After being created the list must be sorted so that all asset
  # operations come before all the asset group asset operations,
  # otherwise the API will reject the request.
  sort_asset_and_asset_group_asset_operations(operations)
end

# Creates a list of MutateOperations that create a new linked text asset.
def create_and_link_text_asset(client, customer_id, text, field_type)
  operations = []
  temp_id = next_temp_id

  # Create the Text Asset.
  operations << client.operation.mutate do |m|
    m.asset_operation = client.operation.create_resource.asset do |a|
      a.resource_name = client.path.asset(customer_id, temp_id)
      a.text_asset = client.resource.text_asset do |text_asset|
        text_asset.text = text
      end
    end
  end

  # Create an AssetGroupAsset to link the Asset to the AssetGroup.
  operations << client.operation.mutate do |m|
    m.asset_group_asset_operation = client.operation.create_resource
        .asset_group_asset do |aga|
      aga.field_type = field_type
      aga.asset_group = client.path.asset_group(
        customer_id,
        ASSET_GROUP_TEMPORARY_ID)
      aga.asset = client.path.asset(customer_id, temp_id)
    end
  end

  operations
end

# Creates a list of MutateOperations that create a new linked image asset.
def create_and_link_image_asset(client, customer_id, url, field_type, asset_name)
  operations = []
  temp_id = next_temp_id

  # Create the Image Asset.
  operations << client.operation.mutate do |m|
    m.asset_operation = client.operation.create_resource.asset do |a|
      a.resource_name = client.path.asset(customer_id, temp_id)
      a.type = :IMAGE
      # Provide a unique friendly name to identify your asset.
      # When there is an existing image asset with the same content but a different
      # name, the new name will be dropped silently.
      a.name = asset_name
      a.image_asset = client.resource.image_asset do |image_asset|
        image_asset.data = get_image_bytes(url)
      end
    end
  end

  # Create an AssetGroupAsset to link the Asset to the AssetGroup.
  operations << client.operation.mutate do |m|
    m.asset_group_asset_operation = client.operation.create_resource
        .asset_group_asset do |aga|
      aga.field_type = field_type
      aga.asset_group = client.path.asset_group(
        customer_id,
        ASSET_GROUP_TEMPORARY_ID)
      aga.asset = client.path.asset(customer_id, temp_id)
    end
  end

  operations
end

# Sorts a list of asset and asset group asset operations.  This sorts the list
# such that all asset operations precede all asset group asset operations. If
# asset group assets are created before assets then an error will be returned
# by the API.
def sort_asset_and_asset_group_asset_operations(operations)
  operations.sort_by do |operation|
    if operation.asset_group_asset_operation
      1
    else
      0
    end
  end
end

def _get_customer_conversion_goals(client, customer_id)
  query = <<~EOD
    SELECT
        customer_conversion_goal.category,
        customer_conversion_goal.origin
    FROM customer_conversion_goal
  EOD

  customer_conversion_goals = []

  ga_service = client.service.google_ads
  # The number of conversion goals is typically less than 50 so we use
  # GoogleAdsService.search instead of search_stream.
  response = ga_service.search(
      customer_id: customer_id,
      query: query,
      page_size: PAGE_SIZE,
  )

  # Iterate over the results and build the list of conversion goals.
  response.each do |row|
    customer_conversion_goals << {
        "category" => row.customer_conversion_goal.category,
        "origin" => row.customer_conversion_goal.origin
    }
  end

  customer_conversion_goals
end

def create_conversion_goal_operations(client, customer_id, customer_conversion_goals)
  campaign_conversion_goal_service = client.service.campaign_conversion_goal

  operations = []

  # To override the customer conversion goals, we will change the
  # biddability of each of the customer conversion goals so that only
  # the desired conversion goal is biddable in this campaign.
  customer_conversion_goals.each do |customer_conversion_goal|
    operations << client.operation.mutate do |m|
        m.campaign_conversion_goal_operation = client.operation.campaign_conversion_goal do |op|
          op.update = client.resource.campaign_conversion_goal do |ccg|
              ccg.resource_name = client.path.campaign_conversion_goal(
                  customer_id,
                  PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID,
                  customer_conversion_goal["category"].to_s,
                  customer_conversion_goal["origin"].to_s)
              # Change the biddability for the campaign conversion goal.
              # Set biddability to True for the desired (category, origin).
              # Set biddability to False for all other conversion goals.
              # Note:
              #  1- It is assumed that this Conversion Action
              #     (category=PURCHASE, origin=WEBSITE) exists in this account.
              #  2- More than one goal can be biddable if desired. This example
              #     shows only one.
              ccg.biddable = (customer_conversion_goal["category"] == :PURCHASE &&
                  customer_conversion_goal["origin"] == :WEBSITE)
          end
          op.update_mask = Google::Ads::GoogleAds::FieldMaskUtil.all_set_fields_of(op.update)
        end
    end
  end

  operations
end

# Loads image data from a URL.
def get_image_bytes(url)
    URI.open(url).read
  end

  # Prints the details of a MutateGoogleAdsResponse.
  def print_response_details(response)
    # Parse the mutate response to print details about the entities that
    # were created by the request.
    suffix = "_result"
    response.mutate_operation_responses.each do |result|
      result.to_h.select {|k, v| v }.each do |name, value|
        if name.to_s.end_with?(suffix)
          name = name.to_s.delete_suffix(suffix)
        end

        puts "Created a(n) #{::Google::Ads::GoogleAds::Utils.camelize(name)} " \
          "with #{value.to_s.strip}."
      end
    end
  end

if __FILE__ == $0
    PAGE_SIZE = 1000

    options = {}

    # The following parameter(s) should be provided to run the example. You can
    # either specify these by changing the INSERT_XXX_ID_HERE values below, or on
    # the command line.
    #
    # Parameters passed on the command line will override any parameters set in
    # code.
    #
    # Running the example with -h will print the command line usage.
    options[:customer_id] = 'INSERT_CUSTOMER_ID_HERE'
    options[:merchant_center_account_id] = 'INSERT_MERCHANT_CENTER_ACCOUNT_ID_HERE'
    options[:final_url] = 'INSERT_FINAL_URL_HERE'

    OptionParser.new do |opts|
      opts.banner = sprintf('Usage: %s [options]', File.basename(__FILE__))

      opts.separator ''
      opts.separator 'Options:'

      opts.on('-C', '--customer-id CUSTOMER-ID', String, 'Customer ID') do |v|
        options[:customer_id] = v
      end

      opts.on('-m', '--merchant-center-account-id MERCHANT-CENTER-ACCOUNT-ID',
          Integer, 'Merchant Center Account ID') do |v|
        options[:merchant_center_account_id] = v
      end

      opts.on('-f', '--final-url FINAL-URL', String, 'Final URL') do |v|
        options[:final_url] = v
      end

      opts.separator ''
      opts.separator 'Help:'

      opts.on_tail('-h', '--help', 'Show this message') do
        puts opts
        exit
      end
    end.parse!

    begin
      add_performance_max_retail_campaign(
          options.fetch(:customer_id).tr("-", ""),
          options.fetch(:merchant_center_account_id),
          options.fetch(:final_url))
    rescue Google::Ads::GoogleAds::Errors::GoogleAdsError => e
      e.failure.errors.each do |error|
        STDERR.printf("Error with message: %s\n", error.message)
        if error.location
          error.location.field_path_elements.each do |field_path_element|
            STDERR.printf("\tOn field: %s\n", field_path_element.field_name)
          end
        end
        error.error_code.to_h.each do |k, v|
          next if v == :UNSPECIFIED
          STDERR.printf("\tType: %s\n\tCode: %s\n", k, v)
        end
      end
      raise
    end
  end
add_performance_max_retail_campaign.rb
      

Perl

#!/usr/bin/perl -w
#
# Copyright 2021, Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# This example shows how to create a Performance Max retail campaign.
#
# This will be created for "All products".
#
# For more information about Performance Max retail campaigns, see
# https://developers.google.com/google-ads/api/docs/performance-max/retail.
#
# Prerequisites:
# - You need to have access to a Merchant Center account. You can find
#   instructions to create a Merchant Center account here:
#   https://support.google.com/merchants/answer/188924.
#   This account must be linked to your Google Ads account. The integration
#   instructions can be found at:
#   https://developers.google.com/google-ads/api/docs/shopping-ads/merchant-center.
# - You need your Google Ads account to track conversions. The different ways
#   to track conversions can be found here:
#   https://support.google.com/google-ads/answer/1722054.
# - You must have at least one conversion action in the account. For more about
#   conversion actions, see
#   https://developers.google.com/google-ads/api/docs/conversions/overview#conversion_actions.

use strict;
use warnings;
use utf8;

use FindBin qw($Bin);
use lib "$Bin/../../lib";
use Google::Ads::GoogleAds::Client;
use Google::Ads::GoogleAds::Utils::GoogleAdsHelper;
use Google::Ads::GoogleAds::Utils::MediaUtils;
use Google::Ads::GoogleAds::Utils::FieldMasks;
use Google::Ads::GoogleAds::V17::Resources::CampaignBudget;
use Google::Ads::GoogleAds::V17::Resources::Campaign;
use Google::Ads::GoogleAds::V17::Resources::ShoppingSetting;
use Google::Ads::GoogleAds::V17::Resources::CampaignCriterion;
use Google::Ads::GoogleAds::V17::Resources::Asset;
use Google::Ads::GoogleAds::V17::Resources::AssetGroup;
use Google::Ads::GoogleAds::V17::Resources::AssetGroupAsset;
use Google::Ads::GoogleAds::V17::Resources::CampaignConversionGoal;
use Google::Ads::GoogleAds::V17::Resources::AssetGroupListingGroupFilter;
use Google::Ads::GoogleAds::V17::Common::MaximizeConversionValue;
use Google::Ads::GoogleAds::V17::Common::LocationInfo;
use Google::Ads::GoogleAds::V17::Common::LanguageInfo;
use Google::Ads::GoogleAds::V17::Common::TextAsset;
use Google::Ads::GoogleAds::V17::Common::ImageAsset;
use Google::Ads::GoogleAds::V17::Enums::BudgetDeliveryMethodEnum qw(STANDARD);
use Google::Ads::GoogleAds::V17::Enums::CampaignStatusEnum;
use Google::Ads::GoogleAds::V17::Enums::AdvertisingChannelTypeEnum
  qw(PERFORMANCE_MAX);
use Google::Ads::GoogleAds::V17::Enums::AssetGroupStatusEnum;
use Google::Ads::GoogleAds::V17::Enums::AssetFieldTypeEnum
  qw(HEADLINE DESCRIPTION LONG_HEADLINE BUSINESS_NAME LOGO MARKETING_IMAGE SQUARE_MARKETING_IMAGE);
use Google::Ads::GoogleAds::V17::Enums::ConversionActionCategoryEnum
  qw(PURCHASE);
use Google::Ads::GoogleAds::V17::Enums::ConversionOriginEnum qw(WEBSITE);
use Google::Ads::GoogleAds::V17::Enums::ListingGroupFilterTypeEnum
  qw(UNIT_INCLUDED);
use Google::Ads::GoogleAds::V17::Enums::ListingGroupFilterListingSourceEnum
  qw(SHOPPING);
use Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation;
use
  Google::Ads::GoogleAds::V17::Services::CampaignBudgetService::CampaignBudgetOperation;
use Google::Ads::GoogleAds::V17::Services::CampaignService::CampaignOperation;
use
  Google::Ads::GoogleAds::V17::Services::CampaignCriterionService::CampaignCriterionOperation;
use Google::Ads::GoogleAds::V17::Services::AssetService::AssetOperation;
use
  Google::Ads::GoogleAds::V17::Services::AssetGroupService::AssetGroupOperation;
use
  Google::Ads::GoogleAds::V17::Services::AssetGroupAssetService::AssetGroupAssetOperation;
use
  Google::Ads::GoogleAds::V17::Services::CampaignConversionGoalService::CampaignConversionGoalOperation;
use
  Google::Ads::GoogleAds::V17::Services::AssetGroupListingGroupFilterService::AssetGroupListingGroupFilterOperation;
use Google::Ads::GoogleAds::V17::Utils::ResourceNames;

use Getopt::Long qw(:config auto_help);
use Pod::Usage;
use Cwd          qw(abs_path);
use Data::Uniqid qw(uniqid);
use POSIX        qw(strftime);

# We specify temporary IDs that are specific to a single mutate request.
# Temporary IDs are always negative and unique within one mutate request.
#
# See https://developers.google.com/google-ads/api/docs/mutating/best-practices
# for further details.
#
# These temporary IDs are fixed because they are used in multiple places.
use constant BUDGET_TEMPORARY_ID                   => -1;
use constant PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID => -2;
use constant ASSET_GROUP_TEMPORARY_ID              => -3;

# There are also entities that will be created in the same request but do not
# need to be fixed temporary IDs because they are referenced only once.
our $next_temp_id = ASSET_GROUP_TEMPORARY_ID - 1;

sub add_performance_max_retail_campaign {
  my ($api_client, $customer_id, $merchant_center_account_id, $final_url) = @_;

  # This campaign will override the customer conversion goals.
  # Retrieve the current list of customer conversion goals.
  my $customer_conversion_goals =
    get_customer_conversion_goals($api_client, $customer_id);

  # Performance Max campaigns require that repeated assets such as headlines
  # and descriptions be created before the campaign.
  # For the list of required assets for a Performance Max campaign, see
  # https://developers.google.com/google-ads/api/docs/performance-max/assets.
  #
  # Create the headlines.
  my $headline_asset_resource_names =
    create_multiple_text_assets($api_client, $customer_id,
    ["Travel", "Travel Reviews", "Book travel"]);
  # Create the descriptions.
  my $description_asset_resource_names =
    create_multiple_text_assets($api_client, $customer_id,
    ["Take to the air!", "Fly to the sky!"]);

  # It's important to create the below entities in this order because they depend
  # on each other.
  my $operations = [];
  # The below methods create and return MutateOperations that we later provide to
  # the GoogleAdsService->mutate() method in order to create the entities in a
  # single request. Since the entities for a Performance Max campaign are closely
  # tied to one-another, it's considered a best practice to create them in a
  # single mutate request so they all complete successfully or fail entirely,
  # leaving no orphaned entities. See:
  # https://developers.google.com/google-ads/api/docs/mutating/overview.
  push @$operations, create_campaign_budget_operation($customer_id);
  push @$operations,
    create_performance_max_campaign_operation($customer_id,
    $merchant_center_account_id);
  push @$operations, @{create_campaign_criterion_operations($customer_id)};
  push @$operations, create_asset_group_operation($customer_id, $final_url);
  push @$operations, create_listing_group_filter_operation($customer_id);
  push @$operations,
    @{
    create_asset_and_asset_group_asset_operations(
      $customer_id, $headline_asset_resource_names,
      $description_asset_resource_names
    )};
  push @$operations,
    @{create_conversion_goal_operations($customer_id,
      $customer_conversion_goals)};

  # Issue a mutate request to create everything and print its information.
  my $mutate_google_ads_response = $api_client->GoogleAdsService()->mutate({
    customerId       => $customer_id,
    mutateOperations => $operations
  });

  print_response_details($mutate_google_ads_response);

  return 1;
}

# Creates a MutateOperation that creates a new CampaignBudget.
#
# A temporary ID will be assigned to this campaign budget so that it can be
# referenced by other objects being created in the same mutate request.
sub create_campaign_budget_operation {
  my ($customer_id) = @_;

  # Create a mutate operation that creates a campaign budget operation.
  return
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      campaignBudgetOperation =>
        Google::Ads::GoogleAds::V17::Services::CampaignBudgetService::CampaignBudgetOperation
        ->new({
          create => Google::Ads::GoogleAds::V17::Resources::CampaignBudget->new(
            {
              # Set a temporary ID in the budget's resource name so it can be
              # referenced by the campaign in later steps.
              resourceName =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign_budget(
                $customer_id, BUDGET_TEMPORARY_ID
                ),
              name => "Performance Max retail campaign budget #" . uniqid(),
              # The budget period already defaults to DAILY.
              amountMicros   => 50000000,
              deliveryMethod => STANDARD,
              # A Performance Max campaign cannot use a shared campaign budget.
              explicitlyShared => "false",
            })})});
}

# Creates a MutateOperation that creates a new Performance Max campaign.
#
# A temporary ID will be assigned to this campaign so that it can be referenced
# by other objects being created in the same mutate request.
sub create_performance_max_campaign_operation {
  my ($customer_id, $merchant_center_account_id) = @_;

  # Create a mutate operation that creates a campaign operation.
  return
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      campaignOperation =>
        Google::Ads::GoogleAds::V17::Services::CampaignService::CampaignOperation
        ->new({
          create => Google::Ads::GoogleAds::V17::Resources::Campaign->new({
              # Assign the resource name with a temporary ID.
              resourceName =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign(
                $customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                ),
              name => "Performance Max retail campaign #'" . uniqid(),
              # Set the budget using the given budget resource name.
              campaignBudget =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign_budget(
                $customer_id, BUDGET_TEMPORARY_ID
                ),
              # Set the campaign status as PAUSED. The campaign is the only entity in
              # the mutate request that should have its status set.
              status =>
                Google::Ads::GoogleAds::V17::Enums::CampaignStatusEnum::PAUSED,
              # All Performance Max campaigns have an advertisingChannelType of
              # PERFORMANCE_MAX. The advertisingChannelSubType should not be set.
              advertisingChannelType => PERFORMANCE_MAX,

              # Bidding strategy must be set directly on the campaign.
              # Setting a portfolio bidding strategy by resource name is not supported.
              # Max Conversion and Max Conversion Value are the only strategies
              # supported for Performance Max campaigns.
              # An optional ROAS (Return on Advertising Spend) can be set for
              # maximizeConversionValue. The ROAS value must be specified as a ratio in
              # the API. It is calculated by dividing "total value" by "total spend".
              # For more information on Max Conversion Value, see the support article:
              # http://support.google.com/google-ads/answer/7684216.
              # A targetRoas of 3.5 corresponds to a 350% return on ad spend.
              # For first time users, it's recommended not to set a target ROAS.
              # maximizeConversionValue =>
              #   Google::Ads::GoogleAds::V17::Common::MaximizeConversionValue->
              #   new({
              #     targetRoas => 3.5
              #   }
              # ),
              # Below is what you would use if you want to maximize conversions.
              # maximizeConversions =>
              #   Google::Ads::GoogleAds::V17::Common::MaximizeConversions->
              #   new({
              #     targetCpaMicros => 1000000
              #   }
              # ),
              # The target CPA is optional. This is the average amount that you would
              # like to spend per conversion action.

              # Set the shopping settings.
              shoppingSetting =>
                Google::Ads::GoogleAds::V17::Resources::ShoppingSetting->new({
                  merchantId => $merchant_center_account_id,
                  # Optional: To use products only from a specific feed, set feedLabel
                  # to the feed label used in Merchant Center.
                  # See: https://support.google.com/merchants/answer/12453549.
                  # Omitting the feedLabel field will use products from all feeds.
                  # feedLabel => "INSERT_FEED_LABEL_HERE"
                }
                ),

              # Set the final URL expansion opt out. This flag is specific to
              # Performance Max campaigns. If opted out (true), only the final URLs in
              # the asset group or URLs specified in the advertiser's Google Merchant
              # Center or business data feeds are targeted.
              # If opted in (false), the entire domain will be targeted. For best
              # results, set this value to false to opt in and allow URL expansions. You
              # can optionally add exclusions to limit traffic to parts of your website.
              #
              # For a Retail campaign, we want the final URL to be limited to those
              # explicitly surfaced via GMC.
              urlExpansionOptOut => "true",

              # Optional fields.
              startDate => strftime("%Y%m%d", localtime(time + 60 * 60 * 24)),
              endDate   =>
                strftime("%Y%m%d", localtime(time + 60 * 60 * 24 * 365)),
            })})});
}

# Creates a list of MutateOperations that create new campaign criteria.
sub create_campaign_criterion_operations {
  my ($customer_id) = @_;

  my $operations = [];
  # Set the LOCATION campaign criteria.
  # Target all of New York City except Brooklyn.
  # Location IDs are listed here:
  # https://developers.google.com/google-ads/api/reference/data/geotargets
  # and they can also be retrieved using the GeoTargetConstantService as shown
  # here: https://developers.google.com/google-ads/api/docs/targeting/location-targeting.
  push @$operations,
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      campaignCriterionOperation =>
        Google::Ads::GoogleAds::V17::Services::CampaignCriterionService::CampaignCriterionOperation
        ->new({
          create =>
            Google::Ads::GoogleAds::V17::Resources::CampaignCriterion->new({
              campaign =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign(
                $customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                ),
              # Adds one positive location target for New York City (ID=1023191),
              # specifically adding the positive criteria before the negative one.
              location =>
                Google::Ads::GoogleAds::V17::Common::LocationInfo->new({
                  geoTargetConstant =>
                    Google::Ads::GoogleAds::V17::Utils::ResourceNames::geo_target_constant(
                    1023191)}
                ),
              negative => "false"
            })})});

  # Next add the negative target for Brooklyn (ID=1022762).
  push @$operations,
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      campaignCriterionOperation =>
        Google::Ads::GoogleAds::V17::Services::CampaignCriterionService::CampaignCriterionOperation
        ->new({
          create =>
            Google::Ads::GoogleAds::V17::Resources::CampaignCriterion->new({
              campaign =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign(
                $customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                ),
              location =>
                Google::Ads::GoogleAds::V17::Common::LocationInfo->new({
                  geoTargetConstant =>
                    Google::Ads::GoogleAds::V17::Utils::ResourceNames::geo_target_constant(
                    1022762)}
                ),
              negative => "true"
            })})});

  # Set the LANGUAGE campaign criterion.
  push @$operations,
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      campaignCriterionOperation =>
        Google::Ads::GoogleAds::V17::Services::CampaignCriterionService::CampaignCriterionOperation
        ->new({
          create =>
            Google::Ads::GoogleAds::V17::Resources::CampaignCriterion->new({
              campaign =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign(
                $customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                ),
              # Set the language.
              # For a list of all language codes, see:
              # https://developers.google.com/google-ads/api/reference/data/codes-formats#expandable-7.
              language =>
                Google::Ads::GoogleAds::V17::Common::LanguageInfo->new({
                  languageConstant =>
                    Google::Ads::GoogleAds::V17::Utils::ResourceNames::language_constant(
                    1000)    # English
                })})})});

  return $operations;
}

# Creates multiple text assets and returns the list of resource names.
#
# These repeated assets must be created in a separate request prior to
# creating the campaign.
sub create_multiple_text_assets {
  my ($api_client, $customer_id, $texts) = @_;

  # Here again we use the GoogleAdService to create multiple text assets in a
  # single request.
  my $operations = [];
  foreach my $text (@$texts) {
    # Create a mutate operation for a text asset.
    push @$operations,
      Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation
      ->new({
        assetOperation =>
          Google::Ads::GoogleAds::V17::Services::AssetService::AssetOperation->
          new({
            create => Google::Ads::GoogleAds::V17::Resources::Asset->new({
                textAsset =>
                  Google::Ads::GoogleAds::V17::Common::TextAsset->new({
                    text => $text
                  })})})});
  }

  # Issue a mutate request to add all assets.
  my $mutate_google_ads_response = $api_client->GoogleAdsService()->mutate({
    customerId       => $customer_id,
    mutateOperations => $operations
  });

  my $asset_resource_names = [];
  foreach
    my $response (@{$mutate_google_ads_response->{mutateOperationResponses}})
  {
    push @$asset_resource_names, $response->{assetResult}{resourceName};
  }
  print_response_details($mutate_google_ads_response);

  return $asset_resource_names;
}

# Creates a MutateOperation that creates a new asset group.
#
# A temporary ID will be assigned to this asset group so that it can be referenced
# by other objects being created in the same mutate request.
sub create_asset_group_operation {
  my ($customer_id, $final_url) = @_;

  # Create a mutate operation that creates an asset group operation.
  return
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      assetGroupOperation =>
        Google::Ads::GoogleAds::V17::Services::AssetGroupService::AssetGroupOperation
        ->new({
          create => Google::Ads::GoogleAds::V17::Resources::AssetGroup->new({
              resourceName =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset_group(
                $customer_id, ASSET_GROUP_TEMPORARY_ID
                ),
              name     => "Performance Max retail asset group #" . uniqid(),
              campaign =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign(
                $customer_id, PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID
                ),
              finalUrls       => [$final_url],
              finalMobileUrls => [$final_url],
              status          =>
                Google::Ads::GoogleAds::V17::Enums::AssetGroupStatusEnum::PAUSED
            })})});
}

# Creates a MutateOperation that creates a new listing group filter.
# A temporary ID will be assigned to this listing group filter so that it
# can be referenced by other objects being created in the same Mutate request.
sub create_listing_group_filter_operation {
  my ($customer_id) = @_;

  # Creates a new ad group criterion containing the "default" listing group
  # (All products).
  my $listing_group_filter =
    Google::Ads::GoogleAds::V17::Resources::AssetGroupListingGroupFilter->new({
      assetGroup =>
        Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset_group(
        $customer_id, ASSET_GROUP_TEMPORARY_ID
        ),

      # Since this is the root node, do not set the parentListingGroupFilter.
      # For all other nodes, this would refer to the parent listing group filter
      # resource name.
      # parentListingGroupFilter => "<PARENT FILTER NAME>"

      # The subdivision type means this node has children. This type is used for
      # the root node as well.
      type => UNIT_INCLUDED,

      # Because this is a Performance Max campaign for retail, we need to specify
      # that this is in the shopping listing source.
      listingSource => SHOPPING
    });

  return
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      assetGroupListingGroupFilterOperation =>
        Google::Ads::GoogleAds::V17::Services::AssetGroupListingGroupFilterService::AssetGroupListingGroupFilterOperation
        ->new({
          create => $listing_group_filter
        })});
}

# Creates a list of MutateOperations that create a new asset_group.
# A temporary ID will be assigned to this asset group so that it can
# be referenced by other objects being created in the same Mutate request.
sub create_asset_and_asset_group_asset_operations {
  my (
    $customer_id,
    $headline_asset_resource_names,
    $description_asset_resource_names
  ) = @_;

  my $operations = [];
  # For the list of required assets for a Performance Max campaign, see
  # https://developers.google.com/google-ads/api/docs/performance-max/assets.

  # An AssetGroup is linked to an Asset by creating a new AssetGroupAsset
  # and providing:
  # - the resource name of the AssetGroup
  # - the resource name of the Asset
  # - the fieldType of the Asset in this AssetGroup
  #
  # To learn more about AssetGroups, see
  # https://developers.google.com/google-ads/api/docs/performance-max/asset-groups.

  # Link the previously created multiple text assets.

  # Link the headline assets.
  foreach my $resource_name (@$headline_asset_resource_names) {
    push @$operations,
      Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation
      ->new({
        assetGroupAssetOperation =>
          Google::Ads::GoogleAds::V17::Services::AssetGroupAssetService::AssetGroupAssetOperation
          ->new({
            create =>
              Google::Ads::GoogleAds::V17::Resources::AssetGroupAsset->new({
                asset      => $resource_name,
                assetGroup =>
                  Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset_group(
                  $customer_id, ASSET_GROUP_TEMPORARY_ID
                  ),
                fieldType => HEADLINE
              })})});
  }

  # Link the description assets.
  foreach my $resource_name (@$description_asset_resource_names) {
    push @$operations,
      Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation
      ->new({
        assetGroupAssetOperation =>
          Google::Ads::GoogleAds::V17::Services::AssetGroupAssetService::AssetGroupAssetOperation
          ->new({
            create =>
              Google::Ads::GoogleAds::V17::Resources::AssetGroupAsset->new({
                asset      => $resource_name,
                assetGroup =>
                  Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset_group(
                  $customer_id, ASSET_GROUP_TEMPORARY_ID
                  ),
                fieldType => DESCRIPTION
              })})});
  }

  # Create and link the long headline text asset.
  push @$operations,
    @{create_and_link_text_asset($customer_id, "Travel the World",
      LONG_HEADLINE)};

  # Create and link the business name text asset.
  push @$operations,
    @{
    create_and_link_text_asset($customer_id, "Interplanetary Cruises",
      BUSINESS_NAME)};

  # Create and link the image assets.

  # Create and link the logo asset.
  push @$operations,
    @{
    create_and_link_image_asset($customer_id, "https://gaagl.page.link/1Crm",
      LOGO, "Logo Image")};

  # Create and link the marketing image asset.
  push @$operations,
    @{
    create_and_link_image_asset(
      $customer_id,    "https://gaagl.page.link/Eit5",
      MARKETING_IMAGE, "Marketing Image"
    )};

  # Create and link the square marketing image asset.
  push @$operations,
    @{
    create_and_link_image_asset(
      $customer_id,           "https://gaagl.page.link/bjYi",
      SQUARE_MARKETING_IMAGE, "Square Marketing Image"
    )};

  # After being created the list must be sorted so that all asset
  # operations come before all the asset group asset operations,
  # otherwise the API will reject the request.
  return sort_asset_and_asset_group_asset_operations($operations);
}

# Creates a list of MutateOperations that create a new linked text asset.
sub create_and_link_text_asset {
  my ($customer_id, $text, $field_type) = @_;

  my $operations = [];
  # Create a new mutate operation for a text asset.
  push @$operations,
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      assetOperation =>
        Google::Ads::GoogleAds::V17::Services::AssetService::AssetOperation->
        new({
          create => Google::Ads::GoogleAds::V17::Resources::Asset->new({
              resourceName =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset(
                $customer_id, $next_temp_id
                ),
              textAsset => Google::Ads::GoogleAds::V17::Common::TextAsset->new({
                  text => $text
                })})})});

  # Create an asset group asset to link the asset to the asset group.
  push @$operations,
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      assetGroupAssetOperation =>
        Google::Ads::GoogleAds::V17::Services::AssetGroupAssetService::AssetGroupAssetOperation
        ->new({
          create =>
            Google::Ads::GoogleAds::V17::Resources::AssetGroupAsset->new({
              asset => Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset(
                $customer_id, $next_temp_id
              ),
              assetGroup =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset_group(
                $customer_id, ASSET_GROUP_TEMPORARY_ID
                ),
              fieldType => $field_type
            })})});

  $next_temp_id--;
  return $operations;
}

# Creates a list of MutateOperations that create a new linked image asset.
sub create_and_link_image_asset {
  my ($customer_id, $url, $field_type, $asset_name) = @_;

  my $operations = [];
  # Create a new mutate operation for an image asset.
  push @$operations,
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      assetOperation =>
        Google::Ads::GoogleAds::V17::Services::AssetService::AssetOperation->
        new({
          create => Google::Ads::GoogleAds::V17::Resources::Asset->new({
              resourceName =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset(
                $customer_id, $next_temp_id
                ),
              # Provide a unique friendly name to identify your asset.
              # When there is an existing image asset with the same content but a different
              # name, the new name will be dropped silently.
              name       => $asset_name,
              imageAsset =>
                Google::Ads::GoogleAds::V17::Common::ImageAsset->new({
                  data => get_base64_data_from_url($url)})})})});

  # Create an asset group asset to link the asset to the asset group.
  push @$operations,
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation->
    new({
      assetGroupAssetOperation =>
        Google::Ads::GoogleAds::V17::Services::AssetGroupAssetService::AssetGroupAssetOperation
        ->new({
          create =>
            Google::Ads::GoogleAds::V17::Resources::AssetGroupAsset->new({
              asset => Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset(
                $customer_id, $next_temp_id
              ),
              assetGroup =>
                Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset_group(
                $customer_id, ASSET_GROUP_TEMPORARY_ID
                ),
              fieldType => $field_type
            })})});

  $next_temp_id--;
  return $operations;
}

# Sorts a list of asset and asset group asset operations.
#
# This sorts the list such that all asset operations precede
# all asset group asset operations. If asset group assets are
# created before assets then an error will be returned by the API.
sub sort_asset_and_asset_group_asset_operations {
  my ($operations) = @_;

  sub sorter {
    if (defined $a->{assetOperation}) {
      return -1;
    } else {
      return 1;
    }
  }
  my @operations_sorted = sort sorter @$operations;
  return \@operations_sorted;
}

# Retrieves the list of customer conversion goals.
sub get_customer_conversion_goals {
  my ($api_client, $customer_id) = @_;

  my $customer_conversion_goals = [];
  # Create a query that retrieves all customer conversion goals.
  my $query =
    "SELECT customer_conversion_goal.category, customer_conversion_goal.origin "
    . "FROM customer_conversion_goal";
  # The number of conversion goals is typically less than 50 so we use
  # GoogleAdsService->search() method instead of search_stream().
  my $search_response = $api_client->GoogleAdsService()->search({
    customerId => $customer_id,
    query      => $query
  });

  # Iterate over the results and build the list of conversion goals.
  foreach my $google_ads_row (@{$search_response->{results}}) {
    push @$customer_conversion_goals,
      {
      category => $google_ads_row->{customerConversionGoal}{category},
      origin   => $google_ads_row->{customerConversionGoal}{origin}};
  }

  return $customer_conversion_goals;
}

# Creates a list of MutateOperations that override customer conversion goals.
sub create_conversion_goal_operations {
  my ($customer_id, $customer_conversion_goals) = @_;

  my $operations = [];
  # To override the customer conversion goals, we will change the biddability of
  # each of the customer conversion goals so that only the desired conversion goal
  # is biddable in this campaign.
  foreach my $customer_conversion_goal (@$customer_conversion_goals) {
    my $campaign_conversion_goal =
      Google::Ads::GoogleAds::V17::Resources::CampaignConversionGoal->new({
        resourceName =>
          Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign_conversion_goal(
          $customer_id,
          PERFORMANCE_MAX_CAMPAIGN_TEMPORARY_ID,
          $customer_conversion_goal->{category},
          $customer_conversion_goal->{origin})});
    # Change the biddability for the campaign conversion goal.
    # Set biddability to true for the desired (category, origin).
    # Set biddability to false for all other conversion goals.
    # Note:
    #  1- It is assumed that this Conversion Action
    #     (category=PURCHASE, origin=WEBSITE) exists in this account.
    #  2- More than one goal can be biddable if desired. This example
    #     shows only one.
    if ( $customer_conversion_goal->{category} eq PURCHASE
      && $customer_conversion_goal->{origin} eq WEBSITE)
    {
      $campaign_conversion_goal->{biddable} = "true";
    } else {
      $campaign_conversion_goal->{biddable} = "false";
    }

    push @$operations,
      Google::Ads::GoogleAds::V17::Services::GoogleAdsService::MutateOperation
      ->new({
        campaignConversionGoalOperation =>
          Google::Ads::GoogleAds::V17::Services::CampaignConversionGoalService::CampaignConversionGoalOperation
          ->new({
            update => $campaign_conversion_goal,
            # Set the update mask on the operation. Here the update mask will be
            # a list of all the fields that were set on the update object.
            updateMask => all_set_fields_of($campaign_conversion_goal)})});
  }

  return $operations;
}

# Prints the details of a MutateGoogleAdsResponse.
# Parses the "response" oneof field name and uses it to extract the new entity's
# name and resource name.
sub print_response_details {
  my ($mutate_google_ads_response) = @_;

  foreach
    my $response (@{$mutate_google_ads_response->{mutateOperationResponses}})
  {
    my $result_type = [keys %$response]->[0];

    printf "Created a(n) %s with '%s'.\n",
      ucfirst $result_type =~ s/Result$//r,
      $response->{$result_type}{resourceName};
  }
}

# Don't run the example if the file is being included.
if (abs_path($0) ne abs_path(__FILE__)) {
  return 1;
}

# Get Google Ads Client, credentials will be read from ~/googleads.properties.
my $api_client = Google::Ads::GoogleAds::Client->new();

# By default examples are set to die on any server returned fault.
$api_client->set_die_on_faults(1);

my $customer_id                = undef;
my $merchant_center_account_id = undef;
my $sales_country              = "US";
my $final_url                  = "http://www.example.com";

# Parameters passed on the command line will override any parameters set in code.
GetOptions(
  "customer_id=s"                => \$customer_id,
  "merchant_center_account_id=i" => \$merchant_center_account_id,
  "sales_country=s"              => \$sales_country,
  "final_url=s"                  => \$final_url
);

# Print the help message if the parameters are not initialized in the code nor
# in the command line.
pod2usage(2)
  if not check_params($customer_id, $merchant_center_account_id, $sales_country,
  $final_url);

# Call the example.
add_performance_max_retail_campaign($api_client, $customer_id =~ s/-//gr,
  $merchant_center_account_id, $sales_country, $final_url);

=pod

=head1 NAME

add_performance_max_retail_campaign

=head1 DESCRIPTION

This example shows how to create a Performance Max retail campaign.

This will be created for "All products".

For more information about Performance Max retail campaigns, see
https://developers.google.com/google-ads/api/docs/performance-max/retail.

Prerequisites:
- You need to have access to a Merchant Center account. You can find
  instructions to create a Merchant Center account here:
  https://support.google.com/merchants/answer/188924.
  This account must be linked to your Google Ads account. The integration
  instructions can be found at:
  https://developers.google.com/google-ads/api/docs/shopping-ads/merchant-center.
- You need your Google Ads account to track conversions. The different ways
  to track conversions can be found here:
  https://support.google.com/google-ads/answer/1722054.
- You must have at least one conversion action in the account. For more about
  conversion actions, see
  https://developers.google.com/google-ads/api/docs/conversions/overview#conversion_actions.

=head1 SYNOPSIS

add_performance_max_retail_campaign.pl [options]

    -help                         Show the help message.
    -customer_id                  The Google Ads customer ID.
    -merchant_center_account_id   The Merchant Center account ID.
    -sales_country                [optional] The sales country of products to include in the campaign.
    -final_url                    [optional] The final URL for the asset group of the campaign.

=cut
add_performance_max_retail_campaign.pl
      

Stato di pubblicazione della campagna: Affinché la campagna venga pubblicata, almeno un prodotto deve essere approvato in Merchant Center. In caso contrario, lo stato della campagna indica che la campagna è in corso, ma in realtà non è così.

di Gemini Advanced.

Risoluzione dei problemi: Accedi alla piattaforma Google Ads come account amministratore. Vai alla campagna Performance Max di un subaccount e controlla le impostazioni della campagna. Inoltre, può essere utile consultare la cronologia delle modifiche per verificare di essere l'utente ad aver apportato le modifiche utilizzando l'API Ads.