Mô hình độ cao kỹ thuật số được thực thi về mặt thuỷ văn (DEM-H) được lấy từ dữ liệu SRTM do NASA thu thập vào tháng 2 năm 2000. Mô hình này đã được điều chỉnh về mặt thuỷ văn và được áp dụng hệ thống thoát nước. DEM-H ghi lại các đường dẫn dòng chảy dựa trên độ cao SRTM và các đường dòng chảy được lập bản đồ, đồng thời hỗ trợ việc phân định lưu vực và các thuộc tính thuỷ văn liên quan. Tập dữ liệu này được lấy từ Mô hình độ cao kỹ thuật số (DEM-S; ANZCW0703014016) được làm mịn trong 1 giây bằng cách thực thi khả năng kết nối thuỷ văn bằng phần mềm ANUDEM, sử dụng các đường thuỷ đạo được chọn theo tỷ lệ 1:250.000 của AusHydro phiên bản 1.6 (tháng 2 năm 2010) (ANZCW0503900101) và các đường lấy từ DEM-S để xác định các thuỷ đạo. Việc thực thi hệ thống thoát nước đã tạo ra một hình ảnh nhất quán về khả năng kết nối thuỷ văn với một số hiện tượng giả tạo về độ cao do việc thực thi hệ thống thoát nước gây ra. Chúng tôi đang chuẩn bị nội dung mô tả đầy đủ về các phương pháp này (Dowling và cộng sự, đang chuẩn bị).
Sản phẩm này cung cấp một DEM phù hợp để sử dụng trong phân tích thuỷ văn, chẳng hạn như định nghĩa lưu vực và định tuyến dòng chảy.
Có một số khu vực có giá trị âm ngoài dự kiến: gần Canberra (150.443044, -35.355281) với giá trị là -55 và ở Tây Úc (124.84, -16.44) với giá trị là -43.
Mô hình độ cao kỹ thuật số (DEM-H) được thực thi về mặt thuỷ văn được lấy từ dữ liệu SRTM do NASA thu thập vào tháng 2 năm 2000. Mô hình này đã được điều chỉnh về mặt thuỷ văn và được thực thi hệ thống thoát nước. DEM-H ghi lại các đường dẫn dòng chảy dựa trên độ cao SRTM và các đường dòng chảy được lập bản đồ, đồng thời hỗ trợ việc phân định lưu vực và các thuộc tính thuỷ văn liên quan. …
[null,null,[],[[["\u003cp\u003eThe Hydrologically Enforced Digital Elevation Model (DEM-H) of Australia was derived from NASA's SRTM data and has been hydrologically conditioned for drainage enforcement.\u003c/p\u003e\n"],["\u003cp\u003eDEM-H supports hydrological analysis, such as catchment definition and flow routing, by capturing flow paths based on SRTM elevations and mapped stream lines.\u003c/p\u003e\n"],["\u003cp\u003eThis DEM, with a resolution of 30.92 meters, covers Australia and has a Creative Commons Attribution 4.0 license.\u003c/p\u003e\n"],["\u003cp\u003eThe dataset was produced by Geoscience Australia and is available in Earth Engine with an elevation band ranging from approximately -31 to 2223 meters.\u003c/p\u003e\n"]]],[],null,["# DEM-H: Australian SRTM Hydrologically Enforced Digital Elevation Model\n\nDataset Availability\n: 2010-02-01T00:00:00Z--2010-02-01T00:00:00Z\n\nDataset Provider\n:\n\n\n [Geoscience Australia](https://www.ga.gov.au/metadata-gateway/metadata/record/72759/)\n\nTags\n:\n[australia](/earth-engine/datasets/tags/australia) [dem](/earth-engine/datasets/tags/dem) [elevation](/earth-engine/datasets/tags/elevation) [elevation-topography](/earth-engine/datasets/tags/elevation-topography) [ga](/earth-engine/datasets/tags/ga) [geophysical](/earth-engine/datasets/tags/geophysical) [geoscience-australia](/earth-engine/datasets/tags/geoscience-australia) [smoothed](/earth-engine/datasets/tags/smoothed) [srtm](/earth-engine/datasets/tags/srtm) \n\n#### Description\n\nThe Hydrologically Enforced Digital Elevation Model\n(DEM-H) was derived from the SRTM data acquired by NASA in February\n2000. The model has been hydrologically conditioned and drainage\nenforced. The DEM-H captures flow paths based on SRTM elevations\nand mapped stream lines, and supports delineation of catchments\nand related hydrological attributes. The dataset was derived from\nthe 1 second smoothed Digital Elevation Model (DEM-S; ANZCW0703014016)\nby enforcing hydrological connectivity with the ANUDEM software,\nusing selected AusHydro V1.6 (February 2010) 1:250,000 scale watercourse\nlines (ANZCW0503900101) and lines derived from DEM-S to define\nthe watercourses. The drainage enforcement has produced a consistent\nrepresentation of hydrological connectivity with some elevation\nartifacts resulting from the drainage enforcement. A full description\nof the methods is in preparation (Dowling et al., in prep).\n\nThis product provides a DEM suitable for use in hydrological analysis\nsuch as catchment definition and flow routing.\n\nThere are several areas with unexpected negative values: close to\nCanberra around (150.443044, -35.355281) with values of -55 and in Western\nAustralia around (124.84, -16.44) with -43.\n\n### Bands\n\n\n**Pixel Size**\n\n30.92 meters\n\n**Bands**\n\n| Name | Units | Min | Max | Pixel Size | Description |\n|-------------|-------|----------|-----------|------------|-------------|\n| `elevation` | m | -31.37\\* | 2223.24\\* | meters | Elevation |\n\n\\* estimated min or max value\n\n### Terms of Use\n\n**Terms of Use**\n\n[CC-BY-4.0](https://spdx.org/licenses/CC-BY-4.0.html)\n\n### Citations\n\nCitations:\n\n- Geoscience Australia, 2015. Digital Elevation Model (DEM) of Australia\n derived from LiDAR 5 Metre Grid. Geoscience Australia, Canberra.\n\n### Explore with Earth Engine\n\n| **Important:** Earth Engine is a platform for petabyte-scale scientific analysis and visualization of geospatial datasets, both for public benefit and for business and government users. Earth Engine is free to use for research, education, and nonprofit use. To get started, please [register for Earth Engine access.](https://console.cloud.google.com/earth-engine)\n\n### Code Editor (JavaScript)\n\n```javascript\nvar dataset = ee.Image('AU/GA/DEM_1SEC/v10/DEM-H');\nvar elevation = dataset.select('elevation');\nvar elevationVis = {\n min: -10.0,\n max: 1300.0,\n palette: [\n '3ae237', 'b5e22e', 'd6e21f', 'fff705', 'ffd611', 'ffb613', 'ff8b13',\n 'ff6e08', 'ff500d', 'ff0000', 'de0101', 'c21301', '0602ff', '235cb1',\n '307ef3', '269db1', '30c8e2', '32d3ef', '3be285', '3ff38f', '86e26f'\n ],\n};\nMap.setCenter(133.95, -24.69, 5);\nMap.addLayer(elevation, elevationVis, 'Elevation');\n```\n[Open in Code Editor](https://code.earthengine.google.com/?scriptPath=Examples:Datasets/AU/AU_GA_DEM_1SEC_v10_DEM-H) \n[DEM-H: Australian SRTM Hydrologically Enforced Digital Elevation Model](/earth-engine/datasets/catalog/AU_GA_DEM_1SEC_v10_DEM-H) \nThe Hydrologically Enforced Digital Elevation Model (DEM-H) was derived from the SRTM data acquired by NASA in February 2000. The model has been hydrologically conditioned and drainage enforced. The DEM-H captures flow paths based on SRTM elevations and mapped stream lines, and supports delineation of catchments and related hydrological attributes. ... \nAU/GA/DEM_1SEC/v10/DEM-H, australia,dem,elevation,elevation-topography,ga,geophysical,geoscience-australia,smoothed,srtm \n2010-02-01T00:00:00Z/2010-02-01T00:00:00Z \n-44.06 112.99 -9.99 154 \nGoogle Earth Engine \nhttps://developers.google.com/earth-engine/datasets\n\n- [](https://doi.org/https://www.ga.gov.au/metadata-gateway/metadata/record/72759/)\n- [](https://doi.org/https://developers.google.com/earth-engine/datasets/catalog/AU_GA_DEM_1SEC_v10_DEM-H)"]]