ارسال پیام

پس از دریافت پیام از یک کاربر، می توانید برای ادامه مکالمه پاسخی ارسال کنید. شما می توانید تا 30 روز پس از آخرین پیام کاربر برای یک کاربر پیام ارسال کنید.

عوامل از طریق ارسال و دریافت پیام با کاربران ارتباط برقرار می کنند. برای ارسال پیام به کاربران، نماینده شما درخواست‌های پیام را به پیام‌های تجاری ارسال می‌کند.

برای ارسال پیام، یک درخواست HTTP POST را به Business Messages API ارسال می‌کنید

  • شناسه پیام منحصر به فرد
  • شناسه مکالمه
  • محتوای پیام

وقتی Business Messages API پیام شما را برای کاربر ارسال می‌کند، 200 OK برمی‌گرداند. اگر مقادیر لازم در پیام شما وجود نداشته باشد، API یک خطای 400 را برمی‌گرداند. اگر پیام از اعتبارنامه‌های نامعتبر استفاده کند، API خطای 401 را برمی‌گرداند.

از صفحه گزارش های کنسول توسعه دهنده Business Communications برای رفع اشکال مشکلات تحویل پیام استفاده کنید.

استراتژی بازگشتی

اگر دستگاه کاربر از پیامی که شما می‌خواهید ارسال کنید پشتیبانی نمی‌کند، مثلاً اگر کاربر از پاسخ‌های پیشنهادی پشتیبانی نمی‌کند، API یک خطای 400 (FAILED PRECONDITION) را برمی‌گرداند. با این حال، می توانید با تعیین متن fallback برای هر پیامی که ارسال می کنید، انواع پیام های پشتیبانی نشده را حل کنید. اگر متن fallback را مشخص کنید، API یک پاسخ 200 OK برمی‌گرداند، حتی اگر دستگاه کاربر از نوع پیام پشتیبانی نکند.

اگر کاربر پیامی دریافت کند که دستگاهش آن را پشتیبانی نمی‌کند اما شامل متن fallback است، دستگاه او متن fallback را نمایش می‌دهد. این رفتار به شما این امکان را می‌دهد تا مکالمه را به روشی پیشگیرانه ادامه دهید، بدون اینکه جریان مکالمه را قطع کنید یا زمان بیشتری برای پردازش خطای 400 (FAILED PRECONDITION) و شناسایی یک پیام جایگزین صرف کنید.

متن fallback برای هر پیام داده شده باید عملکرد پیام را منعکس کند. به عنوان مثال،

  • برای پیام‌هایی که پاسخ‌ها یا اقدامات پیشنهادی دارند، متن پیام را در متن fallback قرار دهید و راهنمایی‌هایی در مورد گزینه‌هایی که کاربران برای ادامه مکالمه دارند ارائه کنید.
  • برای کارت های غنی یا چرخ فلک ها، عنوان و توضیحات را در متن fallback قرار دهید و پیوندهایی به تصاویر یا وب سایت ها اضافه کنید.

برای درج شکسته‌های خط در متن fallback ، از \n یا \r\n استفاده کنید.

متن بازگشتی را آزمایش کنید

قبل از راه‌اندازی یک عامل، می‌توانید با ارسال پیامی با پارامتر URL forceFallback که روی true تنظیم شده است، نحوه نمایش متن بازگشتی در مکالمه را آزمایش کنید. وقتی متن بازگشتی را اجباری می‌کنید، مکالمه محتوای پیام اصلی (متن و پیشنهاد باز کردن URL در مثال زیر) را نادیده می‌گیرد و به جای آن متن بازگشتی را نمایش می‌دهد.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST \
"https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages?forceFallback=true" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello world!',
    'fallback': 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
    'suggestions': [
      {
        'action': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
          'openUrlAction': {
            'url': 'https://www.growingtreebank.com',
          }
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    }
  }"
send-message-fallback.sh
/**
 * This code sends a text message to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message to the Business Messages API defaulting to the fallback text.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} message The message text to send the user.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    forceFallback: true, // Force usage of the fallback text
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      text: message,
      fallback: 'This is the fallback text'
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-fallback.js
import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class TestFallbackTestSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a basic text message with fallback text
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("This is the fallback text")
        .setText("MESSAGE_TEXT")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Force usage of the fallback text
      messageRequest.setForceFallback(true);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
TestFallbackTestSnippet.java
"""This code sends a text message to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    fallback='This is the fallback text',
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='This is a sample text')

# Create the message request, force usage of the fallback text
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    forceFallback=True,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-fallback.py

برای جزئیات، به Message مراجعه کنید.

نمایندگان

هنگامی که نماینده شما پیامی را ارسال می کند، یک نماینده را مشخص می کنید: انسان یا اتوماسیونی که پیام را ساخته است. Business Messages از نمایندگان HUMAN و BOT پشتیبانی می کند.

زمانی که هر نوع اتوماسیونی پیامی را می‌نویسد، یک نماینده BOT را مشخص کنید، خواه اتوماسیون یک پاسخگوی خودکار باشد که به کاربران مکان آنها را در یک صف می‌گوید، یک عامل پیچیده درک زبان طبیعی که دسترسی پویا به جزئیات کاربر دارد یا هر چیز دیگری. پیام هایی با نمایندگان BOT با یک نماد کوچک ظاهر می شوند که به تعیین انتظارات کاربران برای انواع تعاملاتی که ممکن است در آن شرکت کنند کمک می کند.

تنها زمانی یک نماینده HUMAN را مشخص کنید که یک نماینده زنده پیامی را بنویسد. قبل از ارسال هر پیامی از نماینده HUMAN ، یک رویداد REPRESENTATIVE_JOINED ارسال کنید تا به کاربران اطلاع دهید که می توانند پیام های آزاد یا پیچیده بیشتری ارسال کنند. پس از ارسال آخرین پیام خود از یک نماینده HUMAN ، یک رویداد REPRESENTATIVE_LEFT ارسال کنید تا یک بار دیگر انتظارات کاربر را تنظیم کنید.

به عنوان مثال، اگر یک کاربر مکالمه ای را با نماینده شما شروع کند و شما یک پیام خودکار ارسال کنید که باید در عرض دو دقیقه منتظر یک نماینده زنده باشد، آن پیام باید از نماینده BOT ارسال شود. قبل از پیوستن نماینده زنده، یک رویداد REPRESENTATIVE_JOINED ارسال کنید. همه پیام‌های نماینده زنده باید به‌عنوان یک نماینده HUMAN برچسب‌گذاری شوند. وقتی نماینده زنده از مکالمه خارج شد، یک رویداد REPRESENTATIVE_LEFT ارسال کنید. همه پیام‌های بعدی باید از طرف نماینده BOT ارسال شود، مگر اینکه نماینده زنده دیگری به گفتگو ملحق شود.

برای نمونه مکالمه و کد انتقال بین نمایندگان BOT و HUMAN ، انتقال از ربات به نماینده زنده را ببینید.

خواه یک نماینده BOT یا HUMAN باشد، می‌توانید نام نمایشی نماینده و آواتار را مشخص کنید. نام های نمایشی و آواتارها برای کاربران قابل مشاهده است. تصاویر آواتار باید 1024x1024 پیکسل و حداکثر 50 کیلوبایت باشند و باید به عنوان URL های عمومی در دسترس باشند. اگر تصویر آواتار ارائه نمی کنید، از آرم نماینده برای آواتار نماینده استفاده می شود.

متن

متن نوع پیام

ساده ترین پیام ها از متن ساخته شده اند. پیام‌های متنی برای انتقال اطلاعات بدون نیاز به تصاویر بصری، تعامل پیچیده یا پاسخ مناسب هستند.

مثال

کد زیر یک پیام متنی ساده ارسال می کند. برای اطلاعات مرجع، به conversations.messages.create مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
  'messageId': '$(uuidgen)',
  'text': 'Hello world!',
  'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
  }
}"
message-text.sh
/**
 * This code sends a text message to the user.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a text message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} message The message text to send the user.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      text: message,
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'This is a test message', 'BOT');
message-text.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendTextMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a basic text message
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("MESSAGE_TEXT")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendTextMessageSnippet.java

"""This code sends a text message to the user.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)


representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='This is a sample text')

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
message-text.py

متن غنی

نوع پیام متن غنی

پیام‌های متنی با containsRichText تنظیم شده روی true ممکن است شامل قالب‌بندی اولیه Markdown باشد. می‌توانید لینک‌ها را اضافه کنید یا متن را پررنگ یا کج کنید. جدول چند نمونه معتبر را نشان می دهد:

قالب بندی شخصیت ها متن ساده متن ارائه شده
پررنگ ** **Some text** مقداری متن
حروف کج * *Some text* مقداری متن
هایپرلینک []() [Click here](https://www.example.com) اینجا را کلیک کنید
خط شکستن \n Line one\nLine two خط یک
خط دو

قالب بندی باید از قوانین اضافی پیروی کند:

  • همه پیوندها باید با https:// یا http:// شروع شوند
  • انواع مختلف قالب بندی ممکن است تو در تو باشند اما ممکن است در غیر این صورت همپوشانی نداشته باشند.
  • شکست خط با \n در هر جایی از پیام شما مجاز است، اما شکست خط در انتهای پیام شما نمایش داده نمی شود.
  • برای نمایش عادی هر یک از کاراکترهای رزرو شده ( * ، \ ، [ ، یا ] )، باید پیشوند آنها را با یک کاراکتر اسلش ( \ ) قرار دهید.

پیام‌های با قالب‌بندی نامعتبر با پیام خطای Markdown نامعتبر ارسال نمی‌شوند. جدول چند نمونه معتبرتر و نامعتبر را بر اساس قوانین فوق نشان می دهد:

متن ساده اعتبار متن ارائه شده
[Click here](www.example.com) نامعتبر است. پیوند با http:// یا https:// شروع نمی شود ارائه نمی دهد.
[**Click here**](https://www.example.com) معتبر است. لانه سازی مجاز است. اینجا را کلیک کنید
**This is [not** valid](https://www.example.com) نامعتبر است. قالب بندی همپوشانی مجاز نیست. ارائه نمی دهد.
** Some bold text ** نامعتبر است. هیچ فضای خالی انتهایی در داخل ** مجاز نیست. ارائه نمی دهد.
Citation below\* معتبر است. کاراکتر * فرار می کند. نقل قول زیر *

مثال

کد زیر یک پیام متنی غنی ارسال می کند. برای اطلاعات مرجع، به conversations.messages.create مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a rich text to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
  'messageId': '$(uuidgen)',
  'fallback': 'Hello, check out this link https://www.google.com.',
  'text': 'Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).',
  'containsRichText': 'true',
  'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
  }
}"
message-rich-text.sh
/**
 * This code sends a rich text to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a rich text message using markdown to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a rich text message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      containsRichText: true, // Force this message to be processed as rich text
      text: 'Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).',
      fallback: 'Hello, check out this link https://www.google.com.'
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
message-rich-text.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichTextMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich text message
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setContainsRichText(true) // Force this message to be processed as rich text
        .setText("Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).")
        .setFallback("Hello, check out this link https://www.google.com.")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichTextMessageSnippet.java

"""This code sends a rich text to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a rich text message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    fallback='Hello, check out this link https://www.google.com.',
    containsRichText=True,  # Force this message to be processed as rich text
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).')

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
message-rich-text.py

تصاویر

تصویر نوع پیام

ارسال یک تصویر برای کاربر در یک پیام.

می توانید یک پیام تصویری با URL ها به تصویر و تصویر کوچک تصویر ارسال کنید.

مثال

کد زیر یک تصویر را ارسال می کند. برای گزینه‌های قالب‌بندی و مقدار، به conversations.messages.create و Image مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends an image to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Hello, world!\nAn image has been sent with Business Messages.',
    'image': {
      'contentInfo':{
        'altText': 'Image alternative text',
        'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
        'forceRefresh': 'false'
      }
    },
  }"
send-message-image.sh
/**
 * This code sends an image to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts an image message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending an image message
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\n An image has been sent with Business Messages.',
        image: {
          contentInfo: {
            altText: 'Some alternative text',
            fileUrl: 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
            forceRefresh: true,
          },
        },
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-image.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendImageMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create an Image
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setRepresentative(representative)
        .setImage(new BusinessMessagesImage()
          .setContentInfo(
            new BusinessMessagesContentInfo()
              .setFileUrl("FILE_URL")
              .setAltText("ALT_TEXT")
              .setForceRefresh("FORCE_REFRESH")
            ));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendImageMessageSnippet.java

"""This code sends an image to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesImage
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'
image_file_url = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create an image message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Hello, world!\nAn image has been sent with Business Messages.',
    image=BusinessMessagesImage(
        contentInfo=BusinessMessagesContentInfo(
            altText='Alternative text',
            fileUrl=image_file_url,
            forceRefresh=True
        )
    ))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-image.py

پاسخ های پیشنهادی

پاسخ های پیشنهادی

پاسخ‌های پیشنهادی با ارائه پاسخ‌هایی که نماینده شما می‌داند چگونه به آن‌ها واکنش نشان دهد، کاربران را در گفتگوها راهنمایی می‌کند.

هنگامی که کاربر روی یک پاسخ پیشنهادی ضربه می‌زند، نماینده شما پیامی دریافت می‌کند که حاوی متن پاسخ و داده‌های بازپس‌گیری است.

پاسخ‌های پیشنهادی حداکثر ۲۵ کاراکتر و یک پیام حداکثر ۱۳ پیشنهاد دارد.

مثال

کد زیر متنی را با دو پاسخ پیشنهادی ارسال می کند. برای گزینه‌های قالب‌بندی و مقدار، به conversations.messages.create و SuggestedReply مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with suggested replies.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello, world!',
    'fallback': 'Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    'suggestions': [
      {
        'reply': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
        },
      },
      {
        'reply': {
          'text': 'Hi!',
          'postbackData': 'hello-informal',
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-suggested-replies.sh
/**
 * This code sends a text mesage to the user with suggested replies.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message of "Hello, world!" to the Business Messages API along with two suggested replies.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  // Create a text message with two suggested replies
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      fallback: 'Hello, world!\n\nReply with "Hello" or "Hi!"',
      text: 'Hello, world!',
      suggestions: [
        {
          reply: {
            text: 'Hello',
            postbackData: 'hello-formal',
          },
        },
        {
          reply: {
            text: 'Hello',
            postbackData: 'hello-informal',
          },
        },
      ],
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-replies.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendSuggestedReplySnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Hello, world!")
        .setFallback("Hello, world!\n\nReply with \"Hello\" or \"Hi!\"")
        .setSuggestions(Arrays.asList(
            new BusinessMessagesSuggestion()
                .setReply(new BusinessMessagesSuggestedReply()
                    .setText("Hello").setPostbackData("hello-formal")
                ),
            new BusinessMessagesSuggestion()
                .setReply(new BusinessMessagesSuggestedReply()
                    .setText("Hi!").setPostbackData("hello-informal")
                ))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendSuggestedReplySnippet.java

"""This code sends a text mesage to the user with suggested replies.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with two suggested replies and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, world!',
    fallback='Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    suggestions=[
        BusinessMessagesSuggestion(
            reply=BusinessMessagesSuggestedReply(
                text='Hello',
                postbackData='hello-formal')
            ),
        BusinessMessagesSuggestion(
            reply=BusinessMessagesSuggestedReply(
                text='Hi!',
                postbackData='hello-informal')
            )
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-replies.py

اقدامات پیشنهادی

اقدامات پیشنهادی

اقدامات پیشنهادی با استفاده از عملکرد بومی دستگاه‌هایشان، کاربران را از طریق مکالمات راهنمایی می‌کند. هنگامی که کاربر روی یک اقدام پیشنهادی ضربه می‌زند، نماینده شما پیامی را دریافت می‌کند که حاوی متن و داده‌های پس‌بازگشت آن عمل است.

اقدامات پیشنهادی حداکثر دارای 25 نویسه و یک پیام حداکثر دارای 13 پیشنهاد است.

برای گزینه‌های قالب‌بندی و مقدار، به conversations.messages.create و SuggestedAction مراجعه کنید.

اقدام URL را باز کنید

با عمل باز کردن URL، نماینده شما یک URL را برای باز کردن کاربر پیشنهاد می کند. اگر برنامه‌ای به‌عنوان یک کنترل‌کننده پیش‌فرض برای URL ثبت شده باشد، برنامه به جای آن باز می‌شود و نماد عمل نماد برنامه است. اقدامات URL باز فقط از آدرس‌های اینترنتی با پروتکل‌های HTTP و HTTPS پشتیبانی می‌کنند، پروتکل‌های دیگر (مانند mailto) پشتیبانی نمی‌شوند.

کد زیر متنی را با یک عمل URL باز ارسال می کند. برای گزینه‌های قالب‌بندی و مقدار، به OpenUrlAction مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with a suggestion action toopen a URL
# and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello world!',
    'fallback': 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
    'suggestions': [
      {
        'action': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
          'openUrlAction': {
            'url': 'https://www.growingtreebank.com',
          }
        },
      },
    ],
    'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
    },
  }"
send-message-suggested-action-open-url.sh
/**
 * This code sends a text mesage to the user with a suggestion action toopen a URL
 * and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with an open URL action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with an open url action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
        text: 'Hello world!',
        suggestions: [
          {
            action: {
              text: 'Hello',
              postbackData: 'hello-formal',
              openUrlAction: {
                url: 'https://www.growingtreebank.com',
              },
            },
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}


/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-action-open-url.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendSuggestedActionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with an open url action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Hello world!")
        .setFallback("Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
              .setAction(new BusinessMessagesSuggestedAction()
                  .setText("Hello").setPostbackData("hello-formal")
                  .setOpenUrlAction(
                      new BusinessMessagesOpenUrlAction().setUrl("https://www.growingtreebank.com"))
              ))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendSuggestedActionSnippet.java

"""This code sends a text mesage to the user with a suggestion action to open a URL.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesOpenUrlAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with an open url action and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, world!',
    fallback='Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    suggestions=[
        BusinessMessagesSuggestion(
            action=BusinessMessagesSuggestedAction(
                text='Hello',
                postbackData='hello-formal',
                openUrlAction=BusinessMessagesOpenUrlAction(
                    url='https://www.growingtreebank.com'))
            ),
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-action-open-url.py

عمل شماره گیری

عملکرد Dial شماره تلفنی را برای شماره گیری کاربر پیشنهاد می کند. وقتی کاربر روی تراشه پیشنهاد اقدام شماره گیری ضربه می زند، برنامه شماره گیر پیش فرض کاربر با شماره تلفن مشخص شده از قبل پر شده باز می شود.

کد زیر متنی را با عمل شماره گیری ارسال می کند. برای گزینه‌های قالب‌بندی و مقدار، به DialAction مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with a suggestion action to dial
# a phone number and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Contact support for help with this issue.',
    'fallback': 'Give us a call at +12223334444.',
    'suggestions': [
      {
        'action': {
          'text': 'Call support',
          'postbackData': 'call-support',
          'dialAction': {
            'phoneNumber': '+12223334444',
          }
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-suggested-action-dial.sh
/**
 * This code sends a text mesage to the user with a suggestion action to dial
 * a phone number and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with a dial suggested action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with a dial action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Give us a call at +12223334444.',
        text: 'Contact support for help with this issue.',
        suggestions: [
          {
            action: {
              text: 'Call support',
              postbackData: 'call-support',
              dialAction: {
                phoneNumber: '+12223334444',
              },
            },
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-action-dial.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendDialActionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with a dial action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Contact support for help with this issue.")
        .setFallback("Give us a call at +12223334444.")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
              .setAction(new BusinessMessagesSuggestedAction()
                  .setText("Call support").setPostbackData("call-support")
                  .setDialAction(
                      new BusinessMessagesDialAction().setPhoneNumber("+12223334444"))
              )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendDialActionSnippet.java

"""Sends a text mesage to the user with a suggestion action to dial a phone number.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesDialAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with a dial action and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Contact support for help with this issue.',
    fallback='Give us a call at +12223334444.',
    suggestions=[
        BusinessMessagesSuggestion(
            action=BusinessMessagesSuggestedAction(
                text='Call support',
                postbackData='call-support',
                dialAction=BusinessMessagesDialAction(
                    phoneNumber='+12223334444'))
            ),
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-action-dial.py

پیشنهاد درخواست احراز هویت

پیشنهاد درخواست احراز هویت

پیشنهاد درخواست احراز هویت از کاربران می‌خواهد وارد برنامه‌های سازگار با OAuth 2.0 شوند، کدهای احراز هویت را برای تأیید داده‌های حساب ارسال کنند و تجربیات کاربر سفارشی‌شده و جریان‌های مکالمه دقیق را فعال کنند. به تأیید اعتبار با OAuth مراجعه کنید.

مثال

کد زیر متنی را با پیشنهاد درخواست احراز هویت ارسال می کند. برای گزینه‌های قالب‌بندی و مقدار، به conversations.messages.create و Suggestion مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with an authentication request suggestion
# that allows the user to authenticate with OAuth. It also has a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json
# Replace the __CLIENT_ID__
# Replace the __CODE_CHALLENGE__
# Replace the __SCOPE__

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Sign in to continue the conversation.',
    'fallback': 'Visit support.growingtreebank.com to continue.',
    'suggestions': [
      {
        'authenticationRequest': {
          'oauth': {
            'clientId': '__CLIENT_ID__',
            'codeChallenge': '__CODE_CHALLENGE__',
            'scopes': [
              '__SCOPE__',
            ],
          },
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    }
  }"
send-message-authentication-request-suggestion.sh
/**
 * This code sends a text message to the user with an authentication request suggestion
 * that allows the user to authenticate with OAuth. It also has a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Before continuing, learn more about the prerequisites for authenticating
 * with OAuth at: https://developers.google.com/business-communications/business-messages/guides/how-to/integrate/oauth?hl=en
 *
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';
const OAUTH_CLIENT_ID = 'EDIT_HERE';
const OAUTH_CODE_CHALLENGE = 'EDIT_HERE';
const OAUTH_SCOPE = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message to the Business Messages API along with an authentication request.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with an authentication request
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Visit support.growingtreebank.com to continue.',
        text: 'Sign in to continue the conversation.',
        suggestions: [
          {
            authenticationRequest: {
              oauth: {
                clientId: OAUTH_CLIENT_ID,
                codeChallenge: OAUTH_CODE_CHALLENGE,
                scopes: [OAUTH_SCOPE]
              }
            }
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-authentication-request-suggestion.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendAuthenticationRequestSuggestionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with an authentication request
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Would you like to chat with a live agent?")
        .setFallback("Would you like to chat with a live agent?")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
            .setAuthenticationRequest(new BusinessMessagesAuthenticationRequest()
                .setOauth(new BusinessMessagesAuthenticationRequestOauth()
                    .setClientId("CLIENT_ID")
                    .setCodeChallenge("CODE_CHALLENGE")
                    .setScopes(Arrays.asList("SCOPE"))
                )))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendAuthenticationRequestSuggestionSnippet.java

"""Sends a text message to the user with an authentication request suggestion.

It allows the user to authenticate with OAuth and has a fallback text.
Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesAuthenticationRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesAuthenticationRequestOauth
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Before continuing, learn more about the prerequisites for authenticating
# with OAuth at: https://developers.google.com/business-communications/business-messages/guides/how-to/integrate/oauth?hl=en

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'
oauth_client_id = 'EDIT_HERE'
oauth_code_challenge = 'EDIT_HERE'
oauth_scope = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with an authentication request
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Sign in to continue the conversation.',
    fallback='Visit support.growingtreebank.com to continue.',
    suggestions=[
        BusinessMessagesSuggestion(
            authenticationRequest=BusinessMessagesAuthenticationRequest(
                oauth=BusinessMessagesAuthenticationRequestOauth(
                    clientId=oauth_client_id,
                    codeChallenge=oauth_code_challenge,
                    scopes=[oauth_scope])
                )
            ),
        ]
    )

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-authentication-request-suggestion.py

پیشنهاد درخواست نماینده زنده

پیشنهاد درخواست نماینده زنده

پیشنهاد درخواست عامل زنده به شما این امکان را می دهد که کاربران را راهنمایی کنید تا با نمایندگان انسانی در طول تعاملات پیچیده یا زمانی که اتوماسیون شما نمی تواند درخواست کاربر را انجام دهد، تعامل داشته باشند.

کاربران می توانند در هر نقطه از مکالمه از منوی سرریز درخواست یک نماینده زنده کنند. این پیشنهاد راهی را به نمایندگان می‌دهد تا بر اساس زمینه مکالمه، تعاملات با نمایندگان انسانی را به صورت برنامه‌ای پیشنهاد کنند. نماینده شما همیشه باید آماده پاسخگویی به رویداد درخواست شده توسط نماینده زنده باشد، حتی اگر پیشنهاد درخواست نماینده زنده را ارسال نکرده باشد.

هنگامی که کاربران روی یک پیشنهاد درخواست نماینده زنده ضربه می زنند، رویداد درخواست شده توسط نماینده زنده فعال می شود.

مثال

کد زیر متنی را با پیشنهاد درخواست نماینده زنده ارسال می کند. برای گزینه‌های قالب‌بندی و مقدار، به conversations.messages.create و Suggestion مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with a Live agent request suggestion
# that allows the user to connect with a Live agent.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Would you like to chat with a live agent?',
    'fallback': 'Would you like to chat with a live agent?',
    'suggestions': [
      {
        'liveAgentRequest': {},
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-live-agent-request-suggestion.sh
/**
 * This code sends a text message to the user with a Live agent request suggestion
 * that allows the user to connect with a Live agent.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with a live agent request action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 */
 async function sendMessage(conversationId) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with a request for live agent action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: 'BOT', // Must be sent from a BOT representative
        },
        fallback: 'Would you like to chat with a live agent?',
        text: 'Would you like to chat with a live agent?',
        suggestions: [
          {
            liveAgentRequest: {}
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID);
send-message-live-agent-request-suggestion.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendLiveAgentRequestSuggestionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with a live request action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Would you like to chat with a live agent?")
        .setFallback("Would you like to chat with a live agent?")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
            .setLiveAgentRequest(new BusinessMessagesLiveAgentRequest()))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("BOT")); // Must be sent from a BOT representative

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendLiveAgentRequestSuggestionSnippet.java

"""Sends a text message to the user with a Live agent request suggestion.

It allows the user to connect with a Live agent.
Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesLiveAgentRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

# Create a text message with a live agent request action and fallback text
# Follow instructions at https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(  # Must be sent from a BOT representative
        representativeType=BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
    ),
    text='Would you like to chat with a live agent?',
    fallback='Would you like to chat with a live agent?',
    suggestions=[
        BusinessMessagesSuggestion(
            liveAgentRequest=BusinessMessagesLiveAgentRequest()
        )
    ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-live-agent-request-suggestion.py

کارت های غنی

کارت غنی

هنگامی که نیاز به ارسال تکه ای از اطلاعات، رسانه یا پیشنهادات مرتبط دارید، باید یک کارت غنی ارسال کنید. کارت های غنی به نماینده شما اجازه می دهند چندین واحد اطلاعات را در یک پیام ارسال کند.

کارت های غنی می توانند شامل موارد زیر باشند:

  • رسانه (JPG، JPEG، یا PNG، حداکثر 5 مگابایت)
  • تصویر کوچک رسانه (JPG، JPEG یا PNG، حداکثر ۲۵ کیلوبایت)
  • عنوان (حداکثر 200 نویسه)
  • توضیحات (حداکثر 2000 نویسه)
  • فهرستی از پاسخ‌های پیشنهادی و اقدامات پیشنهادی (حداکثر 4)

یک کارت غنی می‌تواند شامل یک یا همه موارد ذکر شده باشد، اما یک کارت باید حداقل حاوی رسانه یا عنوان باشد تا معتبر باشد. یک کارت غنی می‌تواند حداکثر شامل چهار اقدام پیشنهادی و پاسخ پیشنهادی باشد.

نماینده شما می تواند چندین کارت غنی را با هم در یک چرخ فلک کارت غنی ارسال کند.

مثال

کد زیر یک کارت غنی با یک تصویر و پاسخ های پیشنهادی ارسال می کند. برای گزینه‌های قالب‌بندی و مقدار، به conversations.messages.create و RichCard مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a rich card to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
    'richCard': {
      'standaloneCard': {
        'cardContent': {
          'title': 'Hello, world!',
          'description': 'Sent with Business Messages.',
          'media': {
            'height': 'TALL',
            'contentInfo':{
              'altText': 'Google logo',
              'fileUrl': 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
              'forceRefresh': 'false'
            }
          },
          'suggestions': [
            {
              'reply': {
                'text': 'Suggestion #1',
                'postbackData': 'suggestion_1'
              }
            },
            {
              'reply': {
                'text': 'Suggestion #2',
                'postbackData': 'suggestion_2'
              }
            }
          ]
        }
      }
    }
  }"
send-message-rich-card.sh
/**
 * This code sends a rich card to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a rich card message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a rich card message with two suggested replies
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
        richCard: {
          standaloneCard: {
            cardContent: {
              title: 'Hello, world!',
              description: 'Sent with Business Messages.',
              media: {
                height: 'TALL',
                contentInfo: {
                  altText: 'Google logo',
                  fileUrl: 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
                  forceRefresh: false,
                },
              },
              suggestions: [
                {
                  reply: {
                    text: 'Suggestion #1',
                    postbackData: 'suggestion_1',
                  },
                },
                {
                  reply: {
                    text: 'Suggestion #2',
                    postbackData: 'suggestion_2',
                  },
                },
              ],
            },
          },
        },
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-rich-card.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichCardMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich card with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"")
        .setRichCard(new BusinessMessagesRichCard()
            .setStandaloneCard(new BusinessMessagesStandaloneCard()
                .setCardContent(
                    new BusinessMessagesCardContent()
                        .setTitle("Hello, world!")
                        .setDescription("Sent with Business Messages.")
                        .setSuggestions(Arrays.asList(
                            new BusinessMessagesSuggestion()
                                .setReply(new BusinessMessagesSuggestedReply()
                                    .setText("Suggestion #1").setPostbackData("suggestion_1")
                                ),
                            new BusinessMessagesSuggestion()
                                .setReply(new BusinessMessagesSuggestedReply()
                                    .setText("Suggestion #2").setPostbackData("suggestion_2")
                                ))
                        )
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(
                                new BusinessMessagesContentInfo()
                                    .setAltText("Google logo")
                                    .setFileUrl("https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png")
                                    .setForceRefresh(false)
                            ))
                )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichCardMessageSnippet.java

"""This code sends a rich card to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesCardContent
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMedia
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesRichCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesStandaloneCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a rich card message with two suggested replies and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
    richCard=BusinessMessagesRichCard(
        standaloneCard=BusinessMessagesStandaloneCard(
            cardContent=BusinessMessagesCardContent(
                title='Hello, world!',
                description='Sent with Business Messages.',
                suggestions=[
                    BusinessMessagesSuggestion(
                        reply=BusinessMessagesSuggestedReply(
                            text='Suggestion #1',
                            postbackData='suggestion_1')
                        ),
                    BusinessMessagesSuggestion(
                        reply=BusinessMessagesSuggestedReply(
                            text='Suggestion #2',
                            postbackData='suggestion_2')
                        )
                ],
                media=BusinessMessagesMedia(
                    height=BusinessMessagesMedia.HeightValueValuesEnum.TALL,
                    contentInfo=BusinessMessagesContentInfo(
                        altText='Google logo',
                        fileUrl='https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
                        forceRefresh=False
                    ))
                ))))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-rich-card.py

چرخ و فلک کارت غنی

چرخ فلک کارتی غنی

هنگامی که نیاز به ارائه چندین گزینه برای کاربر دارید، از یک چرخ فلک کارت غنی استفاده کنید. چرخ فلک‌ها چندین کارت غنی را به هم متصل می‌کنند و به کاربران امکان می‌دهند آیتم‌ها را با هم مقایسه کنند و به هر کدام به صورت جداگانه واکنش نشان دهند.

چرخ فلک ها ممکن است حاوی حداقل دو و حداکثر ده کارت غنی باشند. کارت های غنی در چرخ و فلک باید با الزامات کلی کارت غنی برای محتوا و ارتفاع مطابقت داشته باشند.

مثال

کد زیر یک چرخ فلک کارت غنی را ارسال می کند. برای گزینه‌های قالب‌بندی و مقدار، به conversations.messages.create و RichCard مراجعه کنید.

CURL Node.js جاوا پایتون 
# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends to the user a carousel with rich cards and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
    'richCard': {
      'carouselCard': {
        'cardWidth': 'MEDIUM',
        'cardContents': [
          {
            'title': 'Card #1',
            'description': 'The description for card #1',
            'suggestions': [
              {
                'reply': {
                  'text': 'Card #1',
                  'postbackData': 'card_1'
                }
              }
            ],
            'media': {
              'height': 'MEDIUM',
              'contentInfo': {
                'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                'forceRefresh': 'false',
              }
            }
          },
          {
            'title': 'Card #2',
            'description': 'The description for card #2',
            'suggestions': [
              {
                'reply': {
                  'text': 'Card #2',
                  'postbackData': 'card_2'
                }
              }
            ],
            'media': {
              'height': 'MEDIUM',
              'contentInfo': {
                'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                'forceRefresh': 'false',
              }
            }
          }
        ]
      }
    }
  }"
send-message-rich-card-carousel.sh
/**
 * This code sends to the user a carousel with rich cards and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a carousel card message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending carousel message
    // with two cards and a suggested reply for each card
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
        richCard: {
          carouselCard: {
            cardWidth: 'MEDIUM',
            cardContents: [
              {
                title: 'Card #1',
                description: 'The description for card #1',
                suggestions: [
                  {
                    reply: {
                      text: 'Card #1',
                      postbackData: 'card_1'
                    }
                  }
                ],
                media: {
                  height: 'MEDIUM',
                  contentInfo: {
                    fileUrl: 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                    forceRefresh: 'false',
                  }
                }
              },
              {
                title: 'Card #2',
                description: 'The description for card #2',
                suggestions: [
                  {
                    reply: {
                      text: 'Card #2',
                      postbackData: 'card_2'
                    }
                  }
                ],
                media: {
                  height: 'MEDIUM',
                  contentInfo: {
                    fileUrl: 'https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                    forceRefresh: 'false',
                  }
                }
              }
            ]
          }
        }
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-rich-card-carousel.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichCardCarouselMessage {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich card with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"")
        .setRichCard(new BusinessMessagesRichCard()
            .setCarouselCard(new BusinessMessagesCarouselCard().setCardWidth("MEDIUM")
                .setCardContents(Arrays.asList(
                    new BusinessMessagesCardContent()
                        .setTitle("Card #1")
                        .setDescription("The description for card #1")
                        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
                            .setReply(new BusinessMessagesSuggestedReply()
                                .setText("Card #1").setPostbackData("card_1")
                            )))
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(new BusinessMessagesContentInfo()
                                .setFileUrl("https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg"))),
                    new BusinessMessagesCardContent()
                        .setTitle("Card #2")
                        .setDescription("The description for card #2")
                        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
                            .setReply(new BusinessMessagesSuggestedReply()
                                .setText("Card #2").setPostbackData("card_2")
                            )))
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(new BusinessMessagesContentInfo()
                                .setFileUrl("https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg")))
                    )
                )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichCardCarouselMessage.java

"""This code sends to the user a carousel with rich cards and a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesCardContent
from businessmessages.businessmessages_v1_messages import BusinessMessagesCarouselCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMedia
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesRichCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a carousel message with two cards and a suggested reply for each card
# and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
    richCard=BusinessMessagesRichCard(
        carouselCard=BusinessMessagesCarouselCard(
            cardWidth=BusinessMessagesCarouselCard.CardWidthValueValuesEnum.MEDIUM,
            cardContents=[
                BusinessMessagesCardContent(
                    title='Card #1',
                    description='The description for card #1',
                    suggestions=[
                        BusinessMessagesSuggestion(
                            reply=BusinessMessagesSuggestedReply(
                                text='Card #1',
                                postbackData='card_1')
                            )
                    ],
                    media=BusinessMessagesMedia(
                        height=BusinessMessagesMedia.HeightValueValuesEnum.MEDIUM,
                        contentInfo=BusinessMessagesContentInfo(
                            fileUrl='https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                            forceRefresh=False))),
                BusinessMessagesCardContent(
                    title='Card #2',
                    description='The description for card #2',
                    suggestions=[
                        BusinessMessagesSuggestion(
                            reply=BusinessMessagesSuggestedReply(
                                text='Card #2',
                                postbackData='card_2')
                            )
                    ],
                    media=BusinessMessagesMedia(
                        height=BusinessMessagesMedia.HeightValueValuesEnum.MEDIUM,
                        contentInfo=BusinessMessagesContentInfo(
                            fileUrl='https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                            forceRefresh=False)))
            ])))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-rich-card-carousel.py