سنوقف ميزة "الرسائل التجارية من Google" نهائيًا في 31 يوليو 2024. يمكنك الاطّلاع على مزيد من المعلومات هنا.

تمت ترجمة هذه الصفحة بواسطة Cloud Translation API‏.

إرسال الرسائل

بعد تلقي رسالة من مستخدم، يمكنك إرسال رد إلى متابعة المحادثة. يمكنك إرسال الرسائل إلى مستخدم خلال مدّة تصل إلى 30 يومًا بعد الرسالة الأخيرة للمستخدم.

يتواصل موظّفو الدعم مع المستخدمين من خلال إرسال الرسائل واستلامها. لإرسال الرسائل إلى المستخدمين، يرسِل وكيلك طلبات الرسائل إلى "الرسائل التجارية".

لإرسال رسالة، يمكنك إرسال طلب HTTP POST إلى Business Message API. تتضمن

معرّف رسالة فريد
معرّف المحادثة
محتوى الرسالة

عندما ترسل Business Message API رسالتك إلى المستخدم، تعرض 200 OK في حال كانت هناك قيم مطلوبة غير متوفّرة في رسالتك، سيتم استخدام واجهة برمجة التطبيقات تعرض الخطأ 400. إذا كانت الرسالة تستخدم بيانات اعتماد غير صالحة، ستعرض واجهة برمجة التطبيقات خطأ 401.

استخدام سجلات وحدة تحكّم المطوّرين في Business Communications لتصحيح أخطاء تسليم الرسائل.

الاستراتيجية الاحتياطية

إذا كان جهاز المستخدم لا يدعم الرسالة التي تحاول إرسالها، مثلاً إذا كانت لا تتوافق واجهة برمجة التطبيقات مع الردود المقترَحة، ستعرض واجهة برمجة التطبيقات الخطأ 400 (FAILED PRECONDITION). ومع ذلك، يمكنك التغلب على أنواع الرسائل غير المتوافقة عن طريق تحديد النص باللغة fallback لكل رسالة ترسلها إذا حدّدت السمة fallback ستعرض واجهة برمجة التطبيقات الاستجابة 200 OK، حتى إذا لم يعرض جهاز المستخدم تدعم نوع الرسالة.

إذا تلقّى المستخدم رسالة تفيد بأنّ جهازه لا يتوافق مع هذا الإصدار ولكنه يتضمّن fallback، سيعرض الجهاز النص fallback بدلاً من ذلك. هذا النمط مواصلة المحادثة بطريقة استباقية دون مقاطعة سير المحادثة أو تخصيص وقت إضافي لمعالجة خطأ 400 (FAILED PRECONDITION) وتحديد رسالة بديلة.

يجب أن يعكس نص fallback لأي رسالة معيّنة وظيفة الرسالة. على سبيل المثال،

بالنسبة إلى الرسائل التي تحتوي على ردود أو إجراءات مقترَحة، يمكنك تضمين نص الرسالة في نص fallback، وتضمين إرشادات بشأن الخيارات المتاحة للمستخدمين متابعة المحادثة.
بالنسبة إلى البطاقات التفاعلية أو لوحات العرض الدوّارة، يُرجى تضمين العنوان والوصف في fallback النصوص، وتتضمن روابط إلى صور أو مواقع إلكترونية.

لإدراج فواصل أسطر في نص باللغة fallback، استخدِم \n أو \r\n.

اختبار النص الاحتياطي

قبل إطلاق أي وكيل، يمكنك اختبار كيفية ظهور النص الاحتياطي في محادثة من خلال إرسال رسالة مع ضبط معلَمة عنوان URL forceFallback على true عند فرض نص احتياطي، تتجاهل المحادثة النص الأساسي محتوى الرسالة (نص واقتراح عنوان URL مفتوح في المثال التالي) تعرض النص الاحتياطي بدلاً من ذلك.

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST \
"https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages?forceFallback=true" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello world!',
    'fallback': 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
    'suggestions': [
      {
        'action': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
          'openUrlAction': {
            'url': 'https://www.growingtreebank.com',
          }
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    }
  }"send-message-fallback.sh

/**
 * This code sends a text message to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message to the Business Messages API defaulting to the fallback text.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} message The message text to send the user.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    forceFallback: true, // Force usage of the fallback text
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      text: message,
      fallback: 'This is the fallback text'
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');send-message-fallback.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class TestFallbackTestSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a basic text message with fallback text
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("This is the fallback text")
        .setText("MESSAGE_TEXT")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Force usage of the fallback text
      messageRequest.setForceFallback(true);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}TestFallbackTestSnippet.java

"""This code sends a text message to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    fallback='This is the fallback text',
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='This is a sample text')

# Create the message request, force usage of the fallback text
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    forceFallback=True,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-fallback.py

للحصول على التفاصيل، يمكنك مراجعة Message

النيابة في مجلس النواب

عندما يرسل وكيلك رسالة ما، عليك تحديد ممثّل: الشخص أو الأتمتة التي ألفت الرسالة. تتوافق ميزة "الرسائل التجارية" مع HUMAN BOT ممثلين

عليك تحديد ممثل BOT عندما يتم إنشاء رسالة باستخدام أي نوع من عمليات التشغيل الآلي. ما إذا كان التشغيل الآلي عبارة عن أداة استجابة تلقائية تخبر المستخدمين بمكانهم في قائمة الانتظار، وهي عامل معقد لفهم اللغة الطبيعية يمكنه الوصول بشكل ديناميكي إلى أو تفاصيل المستخدم أو أي شيء بينهما. تظهر الرسائل مع ممثلين (BOT) مع رمز صغير يساعد في تحديد العملاء الذين لأنواع التفاعلات التي قد المشاركة فيها.

يجب تحديد ممثّل HUMAN فقط عندما يُنشئ موظّف دعم يقدّم رسالة مباشرة. قبل إرسال أي رسائل من ممثّل "HUMAN"، يُرجى إرسال REPRESENTATIVE_JOINED الحدث للسماح يعرف المستخدمون أنه يمكنهم إرسال المزيد من الرسائل الحرة أو المعقدة. بعد إرسال الرسالة الأخيرة من ممثل HUMAN، إرسال حدث REPRESENTATIVE_LEFT إلى تحديد توقعات المستخدم مرة أخرى.

على سبيل المثال، إذا بدأ مستخدم محادثة مع وكيلك أو إرسال رسالة آلية مفادها أنه من المفترض أن ينتظر موظّف دعم يقدّم خدمة مباشرة خلال دقيقة، يجب إرسال هذه الرسالة من أحد ممثلي BOT. قبل انضمّ موظّف دعم يقدّم خدمة مباشرة، يُرجى إرسال حدث REPRESENTATIVE_JOINED. جميع الرسائل من يجب تصنيف موظّف الدعم المباشر على أنّه صادر من ممثّل HUMAN. عندما يخرج موظّف الدعم المباشر من المحادثة، أرسِل حدث REPRESENTATIVE_LEFT. الكل يجب أن تأتي الرسائل اللاحقة من ممثل BOT ما لم تكن هناك رسالة مباشرة أخرى انضمام موظّف الدعم إلى المحادثة.

يمكنك الاطّلاع على النقل من برنامج التتبُّع إلى البث المباشر. موظّف دعم لنموذج محادثة ورمز للانتقال بين BOT وHUMAN والممثلين.

سواء كان الممثل BOT أو HUMAN، يمكنك تحديد الممثّل. الاسم المعروض والصورة الرمزية. يمكن للمستخدمين رؤية كلّ من الأسماء المعروضة والصور الرمزية. يجب أن تكون صور الأفاتار 1024×1024 بكسل وبحجم لا يزيد عن 50 كيلوبايت، كما يجب تحديدها. كعناوين URL متاحة للجمهور. إذا لم تقدم صورة رمزية، فسيعلم يتم استخدام الشعار للصورة الرمزية للممثل.

النص

نص نوع الرسالة

أبسط الرسائل تتكون من النصوص. تُعد الرسائل النصية هي الأنسب لتوصيل المعلومات دون الحاجة إلى العناصر المرئية أو التفاعل المعقد أو الاستجابة.

مثال

يرسل الكود التالي رسالة نصية بسيطة. للحصول على معلومات مرجعية، يُرجى مراجعة conversations.messages.create

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
  'messageId': '$(uuidgen)',
  'text': 'Hello world!',
  'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
  }
}"message-text.sh

/**
 * This code sends a text message to the user.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a text message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} message The message text to send the user.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      text: message,
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'This is a test message', 'BOT');message-text.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendTextMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a basic text message
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("MESSAGE_TEXT")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendTextMessageSnippet.java

"""This code sends a text message to the user.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)


representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='This is a sample text')

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)message-text.py

نص منسَّق

نص منسّق لنوع الرسالة

قد تتضمن الرسائل النصية التي تم ضبط containsRichText فيها على true تنسيق Markdown الأساسي. يمكنك تضمين ارتباطات تشعبية أو جعل النص بخط عريض أو المائل. يعرض الجدول بعض الأمثلة الصالحة:

التنسيق	الشخصيات	نص عادي	النص المعروض
غامق	`**`	`Some text`	نص معيّن
مائل	`*`	`Some text`	نص معيّن
Hyperlink	`[]()`	`[Click here](https://www.example.com)`	انقر هنا
فاصل خط	`\n`	`Line one\nLine two`	السطر الأول السطر الثاني

يجب أن يتّبع التنسيق بعض القواعد الإضافية:

يجب أن تبدأ جميع الروابط بـ https:// أو http://.
قد يتم دمج أنواع مختلفة من التنسيق، ولكن قد لا تتداخل.
يُسمح باستخدام فواصل الأسطر التي تتضمن \n في أي مكان في رسالتك، ولكن يمكن استخدام فواصل الأسطر في ونهاية رسالتك لا تظهر.
لعرض أي من الأحرف المحجوزة بشكل طبيعي (* أو \ أو [ أو ])، فيجب عليك بادئة شرطة مائلة للخلف (\).

يخفق إرسال الرسائل ذات التنسيق غير الصالح مع ظهور رسالة خطأ حول تنسيق Markdown غير صالح. يعرض الجدول المزيد من الأمثلة الصالحة وغير الصالحة استنادًا إلى القواعد المذكورة أعلاه:

نص عادي	مدة الصلاحية	النص المعروض
`[Click here](www.example.com)`	البيانات المُدخَلة غير صالحة. لا يبدأ الرابط بـ `http://` أو `https://`.	لا يتم عرض المحتوى.
`[Click here](https://www.example.com)`	صالحة. يُسمح بدمج البيانات.	انقر هنا
`This is [not valid](https://www.example.com)`	البيانات المُدخَلة غير صالحة. التنسيق المتداخلة غير مسموح به.	لا يتم عرض المحتوى.
` Some bold text `	البيانات المُدخَلة غير صالحة. لا يُسمح بإدخال مسافة بيضاء لاحقة داخل `**`.	لا يتم عرض المحتوى.
`Citation below\*`	صالحة. تم تخطي الحرف `*`.	الاقتباس أقل من `*`

مثال

يرسل الرمز التالي رسالة نصية منسقة. للحصول على معلومات مرجعية، يُرجى مراجعة conversations.messages.create

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a rich text to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
  'messageId': '$(uuidgen)',
  'fallback': 'Hello, check out this link https://www.google.com.',
  'text': 'Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).',
  'containsRichText': 'true',
  'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
  }
}"message-rich-text.sh

/**
 * This code sends a rich text to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a rich text message using markdown to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a rich text message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      containsRichText: true, // Force this message to be processed as rich text
      text: 'Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).',
      fallback: 'Hello, check out this link https://www.google.com.'
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');message-rich-text.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichTextMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich text message
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setContainsRichText(true) // Force this message to be processed as rich text
        .setText("Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).")
        .setFallback("Hello, check out this link https://www.google.com.")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendRichTextMessageSnippet.java

"""This code sends a rich text to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a rich text message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    fallback='Hello, check out this link https://www.google.com.',
    containsRichText=True,  # Force this message to be processed as rich text
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).')

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)message-rich-text.py

الصور

صورة نوع الرسالة

يمكنك إرسال صورة إلى مستخدم في رسالة.

يمكنك إرسال رسالة تتضمن عناوين URL لكل من الصورة والصورة المصغّرة.

مثال

يرسل الرمز التالي صورة. بالنسبة للتنسيق خيارات القيمة، راجع conversations.messages.create أو Image

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends an image to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Hello, world!\nAn image has been sent with Business Messages.',
    'image': {
      'contentInfo':{
        'altText': 'Image alternative text',
        'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
        'forceRefresh': 'false'
      }
    },
  }"send-message-image.sh

/**
 * This code sends an image to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts an image message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending an image message
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\n An image has been sent with Business Messages.',
        image: {
          contentInfo: {
            altText: 'Some alternative text',
            fileUrl: 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
            forceRefresh: true,
          },
        },
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');send-message-image.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendImageMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create an Image
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setRepresentative(representative)
        .setImage(new BusinessMessagesImage()
          .setContentInfo(
            new BusinessMessagesContentInfo()
              .setFileUrl("FILE_URL")
              .setAltText("ALT_TEXT")
              .setForceRefresh("FORCE_REFRESH")
            ));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendImageMessageSnippet.java

"""This code sends an image to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesImage
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'
image_file_url = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create an image message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Hello, world!\nAn image has been sent with Business Messages.',
    image=BusinessMessagesImage(
        contentInfo=BusinessMessagesContentInfo(
            altText='Alternative text',
            fileUrl=image_file_url,
            forceRefresh=True
        )
    ))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-image.py

الردود المقترَحة

ترشد الردود المقترَحة المستخدمين خلال المحادثات من خلال تقديم ردود يعرف وكيلك كيفية التفاعل معها.

عندما ينقر مستخدم على ردّ مقترَح، يتلقّى الوكيل رسالة تحتوي على نص الرد وبيانات تسجيل الإحالات الناجحة.

الحد الأقصى لعدد الأحرف في الردود المقترَحة هو 25 حرفًا، والحدّ الأقصى للرسالة هو من أصل 13 اقتراحًا.

مثال

يرسل الرمز التالي نصًا مع ردين مقترحين. بالنسبة للتنسيق خيارات القيمة، راجع conversations.messages.create أو SuggestedReply

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with suggested replies.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello, world!',
    'fallback': 'Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    'suggestions': [
      {
        'reply': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
        },
      },
      {
        'reply': {
          'text': 'Hi!',
          'postbackData': 'hello-informal',
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"send-message-suggested-replies.sh

/**
 * This code sends a text mesage to the user with suggested replies.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message of "Hello, world!" to the Business Messages API along with two suggested replies.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  // Create a text message with two suggested replies
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      fallback: 'Hello, world!\n\nReply with "Hello" or "Hi!"',
      text: 'Hello, world!',
      suggestions: [
        {
          reply: {
            text: 'Hello',
            postbackData: 'hello-formal',
          },
        },
        {
          reply: {
            text: 'Hello',
            postbackData: 'hello-informal',
          },
        },
      ],
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');send-message-suggested-replies.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendSuggestedReplySnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Hello, world!")
        .setFallback("Hello, world!\n\nReply with \"Hello\" or \"Hi!\"")
        .setSuggestions(Arrays.asList(
            new BusinessMessagesSuggestion()
                .setReply(new BusinessMessagesSuggestedReply()
                    .setText("Hello").setPostbackData("hello-formal")
                ),
            new BusinessMessagesSuggestion()
                .setReply(new BusinessMessagesSuggestedReply()
                    .setText("Hi!").setPostbackData("hello-informal")
                ))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendSuggestedReplySnippet.java

"""This code sends a text mesage to the user with suggested replies.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with two suggested replies and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, world!',
    fallback='Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    suggestions=[
        BusinessMessagesSuggestion(
            reply=BusinessMessagesSuggestedReply(
                text='Hello',
                postbackData='hello-formal')
            ),
        BusinessMessagesSuggestion(
            reply=BusinessMessagesSuggestedReply(
                text='Hi!',
                postbackData='hello-informal')
            )
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-suggested-replies.py

إجراءات مقترحة

ترشد الإجراءات المقترحة المستخدمين خلال المحادثات من خلال الاستفادة من وظائف أجهزتهم. عندما ينقر مستخدم على إجراء مقترَح، يتلقّى الوكيل رسالة تحتوي على نص الإجراء وبيانات تسجيل الإحالات الناجحة.

يمكن أن يصل طول الإجراءات المقترَحة إلى 25 حرفًا كحدّ أقصى، والحد الأقصى للرسالة هو 25 حرفًا. من أصل 13 اقتراحًا.

للحصول على خيارات التنسيق والقيمة، يمكنك الاطّلاع على conversations.messages.create أو SuggestedAction

إجراء فتح عنوان URL

باستخدام إجراء "عنوان URL المفتوح"، يقترح الوكيل عنوان URL ليفتحه المستخدم. إذا كانت تسجيل التطبيق كمعالج تلقائي لعنوان URL، سيتم فتح التطبيق بدلاً من ذلك رمز الإجراء هو رمز التطبيق. لا تتوافق إجراءات عناوين URL المفتوحة إلا مع عناوين URL مع بروتوكولات HTTP وHTTPS، لا يتم التعامل مع البروتوكولات الأخرى (مثل mailto)

يرسل الرمز التالي نصًا مع إجراء "عنوان URL مفتوح". للتنسيق والقيمة الخيارات، يُرجى الاطّلاع على OpenUrlAction

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with a suggestion action toopen a URL
# and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello world!',
    'fallback': 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
    'suggestions': [
      {
        'action': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
          'openUrlAction': {
            'url': 'https://www.growingtreebank.com',
          }
        },
      },
    ],
    'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
    },
  }"send-message-suggested-action-open-url.sh

/**
 * This code sends a text mesage to the user with a suggestion action toopen a URL
 * and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with an open URL action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with an open url action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
        text: 'Hello world!',
        suggestions: [
          {
            action: {
              text: 'Hello',
              postbackData: 'hello-formal',
              openUrlAction: {
                url: 'https://www.growingtreebank.com',
              },
            },
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}


/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');send-message-suggested-action-open-url.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendSuggestedActionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with an open url action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Hello world!")
        .setFallback("Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
              .setAction(new BusinessMessagesSuggestedAction()
                  .setText("Hello").setPostbackData("hello-formal")
                  .setOpenUrlAction(
                      new BusinessMessagesOpenUrlAction().setUrl("https://www.growingtreebank.com"))
              ))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendSuggestedActionSnippet.java

"""This code sends a text mesage to the user with a suggestion action to open a URL.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesOpenUrlAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with an open url action and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, world!',
    fallback='Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    suggestions=[
        BusinessMessagesSuggestion(
            action=BusinessMessagesSuggestedAction(
                text='Hello',
                postbackData='hello-formal',
                openUrlAction=BusinessMessagesOpenUrlAction(
                    url='https://www.growingtreebank.com'))
            ),
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-suggested-action-open-url.py

إجراء الطلب

يقترح إجراء الاتصال رقم هاتف للمستخدم ليتصل به. عندما ينقر مستخدم على شريحة اقتراح إجراء الطلب، يتم فتح تطبيق برنامج الاتصال التلقائي للمستخدم مع عرض تمت تعبئة رقم الهاتف المحدد تلقائيًا.

يرسل الرمز التالي نصًا مع إجراء طلب. للتنسيق والقيمة الخيارات، يُرجى الاطّلاع على DialAction

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with a suggestion action to dial
# a phone number and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Contact support for help with this issue.',
    'fallback': 'Give us a call at +12223334444.',
    'suggestions': [
      {
        'action': {
          'text': 'Call support',
          'postbackData': 'call-support',
          'dialAction': {
            'phoneNumber': '+12223334444',
          }
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"send-message-suggested-action-dial.sh

/**
 * This code sends a text mesage to the user with a suggestion action to dial
 * a phone number and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with a dial suggested action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with a dial action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Give us a call at +12223334444.',
        text: 'Contact support for help with this issue.',
        suggestions: [
          {
            action: {
              text: 'Call support',
              postbackData: 'call-support',
              dialAction: {
                phoneNumber: '+12223334444',
              },
            },
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');send-message-suggested-action-dial.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendDialActionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with a dial action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Contact support for help with this issue.")
        .setFallback("Give us a call at +12223334444.")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
              .setAction(new BusinessMessagesSuggestedAction()
                  .setText("Call support").setPostbackData("call-support")
                  .setDialAction(
                      new BusinessMessagesDialAction().setPhoneNumber("+12223334444"))
              )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendDialActionSnippet.java

"""Sends a text mesage to the user with a suggestion action to dial a phone number.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesDialAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with a dial action and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Contact support for help with this issue.',
    fallback='Give us a call at +12223334444.',
    suggestions=[
        BusinessMessagesSuggestion(
            action=BusinessMessagesSuggestedAction(
                text='Call support',
                postbackData='call-support',
                dialAction=BusinessMessagesDialAction(
                    phoneNumber='+12223334444'))
            ),
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-suggested-action-dial.py

اقتراح طلب المصادقة

يطلب اقتراح طلب المصادقة من المستخدمين تسجيل الدخول إلى تطبيق متوافق مع OAuth 2.0، تمرير رموز المصادقة للتأكيد بيانات الحساب وتفعيل تجارب مخصّصة للمستخدمين ومحادثات مفصّلة التدفقات. راجِع المصادقة باستخدام بروتوكول OAuth.

مثال

يرسل الرمز التالي نصًا مع اقتراح لطلب المصادقة. بالنسبة خيارات التنسيق والقيمة، يمكنك الاطلاع على conversations.messages.create أو Suggestion

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with an authentication request suggestion
# that allows the user to authenticate with OAuth. It also has a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json
# Replace the __CLIENT_ID__
# Replace the __CODE_CHALLENGE__
# Replace the __SCOPE__

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Sign in to continue the conversation.',
    'fallback': 'Visit support.growingtreebank.com to continue.',
    'suggestions': [
      {
        'authenticationRequest': {
          'oauth': {
            'clientId': '__CLIENT_ID__',
            'codeChallenge': '__CODE_CHALLENGE__',
            'scopes': [
              '__SCOPE__',
            ],
          },
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    }
  }"send-message-authentication-request-suggestion.sh

/**
 * This code sends a text message to the user with an authentication request suggestion
 * that allows the user to authenticate with OAuth. It also has a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Before continuing, learn more about the prerequisites for authenticating
 * with OAuth at: https://developers.google.com/business-communications/business-messages/guides/how-to/integrate/oauth?hl=en
 *
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';
const OAUTH_CLIENT_ID = 'EDIT_HERE';
const OAUTH_CODE_CHALLENGE = 'EDIT_HERE';
const OAUTH_SCOPE = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message to the Business Messages API along with an authentication request.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with an authentication request
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Visit support.growingtreebank.com to continue.',
        text: 'Sign in to continue the conversation.',
        suggestions: [
          {
            authenticationRequest: {
              oauth: {
                clientId: OAUTH_CLIENT_ID,
                codeChallenge: OAUTH_CODE_CHALLENGE,
                scopes: [OAUTH_SCOPE]
              }
            }
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');send-message-authentication-request-suggestion.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendAuthenticationRequestSuggestionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with an authentication request
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Would you like to chat with a live agent?")
        .setFallback("Would you like to chat with a live agent?")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
            .setAuthenticationRequest(new BusinessMessagesAuthenticationRequest()
                .setOauth(new BusinessMessagesAuthenticationRequestOauth()
                    .setClientId("CLIENT_ID")
                    .setCodeChallenge("CODE_CHALLENGE")
                    .setScopes(Arrays.asList("SCOPE"))
                )))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendAuthenticationRequestSuggestionSnippet.java

"""Sends a text message to the user with an authentication request suggestion.

It allows the user to authenticate with OAuth and has a fallback text.
Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesAuthenticationRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesAuthenticationRequestOauth
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Before continuing, learn more about the prerequisites for authenticating
# with OAuth at: https://developers.google.com/business-communications/business-messages/guides/how-to/integrate/oauth?hl=en

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'
oauth_client_id = 'EDIT_HERE'
oauth_code_challenge = 'EDIT_HERE'
oauth_scope = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with an authentication request
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Sign in to continue the conversation.',
    fallback='Visit support.growingtreebank.com to continue.',
    suggestions=[
        BusinessMessagesSuggestion(
            authenticationRequest=BusinessMessagesAuthenticationRequest(
                oauth=BusinessMessagesAuthenticationRequestOauth(
                    clientId=oauth_client_id,
                    codeChallenge=oauth_code_challenge,
                    scopes=[oauth_scope])
                )
            ),
        ]
    )

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-authentication-request-suggestion.py

اقتراح لطلب موظّف دعم يقدّم خدمة مباشرة

يتيح لك اقتراح طلبات موظّف الدعم المباشر توجيه المستخدمين للتفاعل مع خلال التفاعلات المعقدة أو عندما يتعذر على الأتمتة معالجة طلب المستخدم.

يمكن للمستخدمين طلب موظف دعم مباشر في أي وقت من المحادثة من القائمة الكاملة. القائمة. يمنح هذا الاقتراح موظّفي الدعم طريقة لاقتراحهم بشكل آلي. والتفاعلات مع الممثلين البشريين بناءً على سياق محادثة. يجب أن يكون وكيلك جاهزًا دائمًا للرد على موظّف دعم يقدّم خدمة مباشرة الحدث المطلوب، حتى إذا لم يرسل أي اقتراح لطلب موظّف دعم متاح.

عندما ينقر المستخدمون على اقتراح لطلب موظّف دعم يقدّم خدمة مباشرة، يؤدي ذلك إلى عرض موظّف دعم يقدّم خدمة مباشرة. طلب الحدث.

مثال

يرسل الرمز التالي نصًا مع اقتراح لطلب وكيل مباشر. بالنسبة خيارات التنسيق والقيمة، يمكنك الاطلاع على conversations.messages.create أو Suggestion

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with a Live agent request suggestion
# that allows the user to connect with a Live agent.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Would you like to chat with a live agent?',
    'fallback': 'Would you like to chat with a live agent?',
    'suggestions': [
      {
        'liveAgentRequest': {},
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"send-message-live-agent-request-suggestion.sh

/**
 * This code sends a text message to the user with a Live agent request suggestion
 * that allows the user to connect with a Live agent.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with a live agent request action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 */
 async function sendMessage(conversationId) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with a request for live agent action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: 'BOT', // Must be sent from a BOT representative
        },
        fallback: 'Would you like to chat with a live agent?',
        text: 'Would you like to chat with a live agent?',
        suggestions: [
          {
            liveAgentRequest: {}
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID);send-message-live-agent-request-suggestion.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendLiveAgentRequestSuggestionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with a live request action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Would you like to chat with a live agent?")
        .setFallback("Would you like to chat with a live agent?")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
            .setLiveAgentRequest(new BusinessMessagesLiveAgentRequest()))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("BOT")); // Must be sent from a BOT representative

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendLiveAgentRequestSuggestionSnippet.java

"""Sends a text message to the user with a Live agent request suggestion.

It allows the user to connect with a Live agent.
Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesLiveAgentRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

# Create a text message with a live agent request action and fallback text
# Follow instructions at https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(  # Must be sent from a BOT representative
        representativeType=BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
    ),
    text='Would you like to chat with a live agent?',
    fallback='Would you like to chat with a live agent?',
    suggestions=[
        BusinessMessagesSuggestion(
            liveAgentRequest=BusinessMessagesLiveAgentRequest()
        )
    ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-live-agent-request-suggestion.py

بطاقات البحث الذكية

بطاقة تفاعلية

عندما تحتاج إلى إرسال جزء من المعلومات أو الوسائط أو الاقتراحات ذات الصلة، إرسال بطاقة تفاعلية. وتتيح البطاقات التفاعلية لوكيلك إرسال وحدات متعددة من المعلومات في رسالة واحدة.

يمكن أن تشتمل البطاقات التفاعلية على العناصر التالية:

الوسائط (بتنسيق JPG أو JPEG أو PNG، بحد أقصى 5 ميغابايت)
صورة مصغّرة للوسائط (بتنسيق JPG أو JPEG أو PNG، بحد أقصى 25 كيلوبايت)
العنوان (200 حرف بحد أقصى)
الوصف (2000 حرف كحدٍ أقصى)
قائمة بالردود المقترَحة والإجراءات المقترَحة (4 كحد أقصى)

يمكن أن تحتوي البطاقة التفاعلية على أيٍّ من العناصر المدرَجة أو جميعها، ولكن يجب أن تحتوي البطاقة على على الأقل الوسائط أو العنوان ليكون صالحًا. يمكن أن تحتوي بطاقة تفاعلية على أربعة إصدارات كحد أقصى الإجراءات المقترَحة والردود المقترَحة

يمكن لوكيلك إرسال عدة بطاقات تفاعلية معًا في بطاقة تفاعلية. لوحة العرض الدوّارة.

مثال

يرسل الرمز التالي بطاقة تفاعلية تحتوي على صورة وردود مقترَحة. بالنسبة خيارات التنسيق والقيمة، يمكنك الاطلاع على conversations.messages.create أو RichCard

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a rich card to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
    'richCard': {
      'standaloneCard': {
        'cardContent': {
          'title': 'Hello, world!',
          'description': 'Sent with Business Messages.',
          'media': {
            'height': 'TALL',
            'contentInfo':{
              'altText': 'Google logo',
              'fileUrl': 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
              'forceRefresh': 'false'
            }
          },
          'suggestions': [
            {
              'reply': {
                'text': 'Suggestion #1',
                'postbackData': 'suggestion_1'
              }
            },
            {
              'reply': {
                'text': 'Suggestion #2',
                'postbackData': 'suggestion_2'
              }
            }
          ]
        }
      }
    }
  }"send-message-rich-card.sh

/**
 * This code sends a rich card to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a rich card message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a rich card message with two suggested replies
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
        richCard: {
          standaloneCard: {
            cardContent: {
              title: 'Hello, world!',
              description: 'Sent with Business Messages.',
              media: {
                height: 'TALL',
                contentInfo: {
                  altText: 'Google logo',
                  fileUrl: 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
                  forceRefresh: false,
                },
              },
              suggestions: [
                {
                  reply: {
                    text: 'Suggestion #1',
                    postbackData: 'suggestion_1',
                  },
                },
                {
                  reply: {
                    text: 'Suggestion #2',
                    postbackData: 'suggestion_2',
                  },
                },
              ],
            },
          },
        },
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');send-message-rich-card.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichCardMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich card with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"")
        .setRichCard(new BusinessMessagesRichCard()
            .setStandaloneCard(new BusinessMessagesStandaloneCard()
                .setCardContent(
                    new BusinessMessagesCardContent()
                        .setTitle("Hello, world!")
                        .setDescription("Sent with Business Messages.")
                        .setSuggestions(Arrays.asList(
                            new BusinessMessagesSuggestion()
                                .setReply(new BusinessMessagesSuggestedReply()
                                    .setText("Suggestion #1").setPostbackData("suggestion_1")
                                ),
                            new BusinessMessagesSuggestion()
                                .setReply(new BusinessMessagesSuggestedReply()
                                    .setText("Suggestion #2").setPostbackData("suggestion_2")
                                ))
                        )
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(
                                new BusinessMessagesContentInfo()
                                    .setAltText("Google logo")
                                    .setFileUrl("https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png")
                                    .setForceRefresh(false)
                            ))
                )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendRichCardMessageSnippet.java

"""This code sends a rich card to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesCardContent
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMedia
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesRichCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesStandaloneCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a rich card message with two suggested replies and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
    richCard=BusinessMessagesRichCard(
        standaloneCard=BusinessMessagesStandaloneCard(
            cardContent=BusinessMessagesCardContent(
                title='Hello, world!',
                description='Sent with Business Messages.',
                suggestions=[
                    BusinessMessagesSuggestion(
                        reply=BusinessMessagesSuggestedReply(
                            text='Suggestion #1',
                            postbackData='suggestion_1')
                        ),
                    BusinessMessagesSuggestion(
                        reply=BusinessMessagesSuggestedReply(
                            text='Suggestion #2',
                            postbackData='suggestion_2')
                        )
                ],
                media=BusinessMessagesMedia(
                    height=BusinessMessagesMedia.HeightValueValuesEnum.TALL,
                    contentInfo=BusinessMessagesContentInfo(
                        altText='Google logo',
                        fileUrl='https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
                        forceRefresh=False
                    ))
                ))))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-rich-card.py

منصّات العرض بعناصر متغيّرة للبطاقات التفاعلية

لوحة عرض دوّارة للبطاقات التفاعلية

عندما تحتاج إلى تقديم خيارات متعددة للمستخدم للاختيار من بينها، استخدم لوحة عرض دوّارة لبطاقة تفاعلية. سلسلة العروض الدوارة معًا متعددة الثابت بطاقات، ما يتيح للمستخدمين مقارنة العناصر والتفاعل مع كل منها كل على حدة.

يجب أن تتضمّن لوحات العرض الدوّارة بطاقتَين على الأقل وعشر بطاقات تفاعلية كحد أقصى. غنية أن تتوافق البطاقات ضمن لوحات العرض الدوّارة مع المتطلبات العامة للبطاقات التفاعلية المحتوى والارتفاع.

مثال

يرسل الرمز التالي لوحة عرض دوّارة لبطاقات تفاعلية. بالنسبة للتنسيق خيارات القيمة، راجع conversations.messages.create أو RichCard

cURL Node.js Java Python

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends to the user a carousel with rich cards and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
    'richCard': {
      'carouselCard': {
        'cardWidth': 'MEDIUM',
        'cardContents': [
          {
            'title': 'Card #1',
            'description': 'The description for card #1',
            'suggestions': [
              {
                'reply': {
                  'text': 'Card #1',
                  'postbackData': 'card_1'
                }
              }
            ],
            'media': {
              'height': 'MEDIUM',
              'contentInfo': {
                'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                'forceRefresh': 'false',
              }
            }
          },
          {
            'title': 'Card #2',
            'description': 'The description for card #2',
            'suggestions': [
              {
                'reply': {
                  'text': 'Card #2',
                  'postbackData': 'card_2'
                }
              }
            ],
            'media': {
              'height': 'MEDIUM',
              'contentInfo': {
                'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                'forceRefresh': 'false',
              }
            }
          }
        ]
      }
    }
  }"send-message-rich-card-carousel.sh

/**
 * This code sends to the user a carousel with rich cards and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a carousel card message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending carousel message
    // with two cards and a suggested reply for each card
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
        richCard: {
          carouselCard: {
            cardWidth: 'MEDIUM',
            cardContents: [
              {
                title: 'Card #1',
                description: 'The description for card #1',
                suggestions: [
                  {
                    reply: {
                      text: 'Card #1',
                      postbackData: 'card_1'
                    }
                  }
                ],
                media: {
                  height: 'MEDIUM',
                  contentInfo: {
                    fileUrl: 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                    forceRefresh: 'false',
                  }
                }
              },
              {
                title: 'Card #2',
                description: 'The description for card #2',
                suggestions: [
                  {
                    reply: {
                      text: 'Card #2',
                      postbackData: 'card_2'
                    }
                  }
                ],
                media: {
                  height: 'MEDIUM',
                  contentInfo: {
                    fileUrl: 'https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                    forceRefresh: 'false',
                  }
                }
              }
            ]
          }
        }
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');send-message-rich-card-carousel.js

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichCardCarouselMessage {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich card with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"")
        .setRichCard(new BusinessMessagesRichCard()
            .setCarouselCard(new BusinessMessagesCarouselCard().setCardWidth("MEDIUM")
                .setCardContents(Arrays.asList(
                    new BusinessMessagesCardContent()
                        .setTitle("Card #1")
                        .setDescription("The description for card #1")
                        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
                            .setReply(new BusinessMessagesSuggestedReply()
                                .setText("Card #1").setPostbackData("card_1")
                            )))
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(new BusinessMessagesContentInfo()
                                .setFileUrl("https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg"))),
                    new BusinessMessagesCardContent()
                        .setTitle("Card #2")
                        .setDescription("The description for card #2")
                        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
                            .setReply(new BusinessMessagesSuggestedReply()
                                .setText("Card #2").setPostbackData("card_2")
                            )))
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(new BusinessMessagesContentInfo()
                                .setFileUrl("https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg")))
                    )
                )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}SendRichCardCarouselMessage.java

"""This code sends to the user a carousel with rich cards and a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesCardContent
from businessmessages.businessmessages_v1_messages import BusinessMessagesCarouselCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMedia
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesRichCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a carousel message with two cards and a suggested reply for each card
# and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
    richCard=BusinessMessagesRichCard(
        carouselCard=BusinessMessagesCarouselCard(
            cardWidth=BusinessMessagesCarouselCard.CardWidthValueValuesEnum.MEDIUM,
            cardContents=[
                BusinessMessagesCardContent(
                    title='Card #1',
                    description='The description for card #1',
                    suggestions=[
                        BusinessMessagesSuggestion(
                            reply=BusinessMessagesSuggestedReply(
                                text='Card #1',
                                postbackData='card_1')
                            )
                    ],
                    media=BusinessMessagesMedia(
                        height=BusinessMessagesMedia.HeightValueValuesEnum.MEDIUM,
                        contentInfo=BusinessMessagesContentInfo(
                            fileUrl='https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                            forceRefresh=False))),
                BusinessMessagesCardContent(
                    title='Card #2',
                    description='The description for card #2',
                    suggestions=[
                        BusinessMessagesSuggestion(
                            reply=BusinessMessagesSuggestedReply(
                                text='Card #2',
                                postbackData='card_2')
                            )
                    ],
                    media=BusinessMessagesMedia(
                        height=BusinessMessagesMedia.HeightValueValuesEnum.MEDIUM,
                        contentInfo=BusinessMessagesContentInfo(
                            fileUrl='https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                            forceRefresh=False)))
            ])))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)send-message-rich-card-carousel.py