Hesap bütçesi

Hesap bütçeleri, bir hesabın belirli bir dönemde ne kadar harcayabileceğini kontrol eder Böylece harcama sınırı, başlangıç zamanı ve bitiş zamanı gibi bütçe özelliklerini tanımlayabilirsiniz. Onlar ilgili hesabın faturalandırma ayarlarından birine işaret etmelidir. Ödeme hesabı faturalandırılır. Web sitenizdeki Google Haberler'de AccountBudget göndererek AccountBudgetProposal nesne algılandı.

AccountBudget nesneleri nihai sonucu temsil eder bazı ipuçları vereceğim. Bir teklif onaylandıktan sonra, teklifindeki değişiklikler ( düzenlemeler) yeni bir hesap bütçesinin veya mevcut bir tanesine güncelleyebilirsiniz. Bu işlem, proposal_type belirtildiğinden emin olun.

AccountBudgetProposalType	Açıklama
CREATE	Yeni bir hesap bütçesi oluşturur. Bu bütçenin kullanılmadan önce onaylanması gerekir.
UPDATE	Mevcut hesap bütçesini değiştirir.
END	Hesap bütçesinin bitiş zamanını geçerli zamana ayarlar.
REMOVE	Başlangıç zamanından önceki hesap bütçesini kaldırır.

Önemli Nokta: AccountBudgetProposal nesneleri ve uygulanmadan önce Google tarafından incelenir. İncelemeler genellikle bir saatten daha kısa sürer, ancak bütçelerin belirli bir süre içinde .

Aşağıdaki bölümlerde her bir teklif türünün davranışı açıklanmaktadır.

Hesap bütçesi teklifi oluşturma

Yeni bir hesap bütçesi oluşturmak, müşterilerin harcamalarını kontrol etmenize olanak tanır ve davranışa işaret eder. Şunu kullanın: AccountBudgetProposalService yeni bir AccountBudgetProposal. Bu dönüşüm işlemini proposal_type - CREATE değerini girin. Daha fazla bilgi için yönetimi bölümünü inceleyin.

Yazdığınız ödeme hesabıyla bir faturalandırma kurulumu kullanmayı unutmayın. erişim. Şu bilgiler için faturalandırma kurulum kılavuzunu inceleyin: bolca fırsat sunuyor.

Aşağıdaki örnekte yeni bir bütçe teklifinin nasıl oluşturulacağı gösterilmektedir.

Java

private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) {
  // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if
  // approved will become an AccountBudget.
  AccountBudgetProposal proposal =
      AccountBudgetProposal.newBuilder()
          .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
          .setProposalType(AccountBudgetProposalType.CREATE)
          .setProposedName("Account Budget (example)")

          // Specifies the account budget starts immediately.
          .setProposedStartTimeType(TimeType.NOW)
          // Alternatively you can specify a specific start time. Refer to the
          // AccountBudgetProposal
          // resource documentation for allowed formats.
          //
          // .setProposedStartDateTime("2020-01-02 03:04:05")

          // Specifies that the budget runs forever.
          .setProposedEndTimeType(TimeType.FOREVER)
          // Alternatively you can specify a specific end time. Allowed formats are as above.
          // .setProposedEndDateTime("2021-02-03 04:05:06")

          // Optional: sets notes for the budget. These are free text and do not effect budget
          // delivery.
          // .setProposedNotes("Received prepayment of $0.01")

          // Sets the spending limit to 0.01, measured in the Google Ads account currency.
          .setProposedSpendingLimitMicros(10_000)

          // Optional: sets PO number for record keeping. This value is at the user's
          // discretion, and has no effect on Google Billing & Payments.
          // .setProposedPurchaseOrderNumber("PO number 12345")
          .build();

  // Creates an operation which will add the new AccountBudgetProposal.
  AccountBudgetProposalOperation operation =
      AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build();

  try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient =
      googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) {
    // Sends the request to the Account Budget Proposal Service.
    MutateAccountBudgetProposalResponse response =
        accountBudgetProposalServiceClient.mutateAccountBudgetProposal(
            String.valueOf(customerId), operation);

    System.out.printf(
        "Account budget proposal created: %s.%n", response.getResult().getResourceName());
  }
}
AddAccountBudgetProposal.java
      

C#

public void Run(GoogleAdsClient client, long customerId, long billingSetupId)
{
    // Get the AccountBudgetProposalServiceClient.
    AccountBudgetProposalServiceClient proposalService =
        client.GetService(Services.V17.AccountBudgetProposalService);

    // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads,
    // and if approved will become an AccountBudget.
    AccountBudgetProposal proposal = new AccountBudgetProposal()
    {
        BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
        ProposalType = AccountBudgetProposalType.Create,
        ProposedName = "Account Budget (example)",

        // Specify the account budget starts immediately
        ProposedStartTimeType = TimeType.Now,
        // Alternatively, you can specify a specific start time. Refer to the
        // AccountBudgetProposal resource documentation for allowed formats.
        //
        //ProposedStartDateTime = "2020-01-02 03:04:05",

        // Specify that the budget runs forever.
        ProposedEndTimeType = TimeType.Forever,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        //ProposedEndDateTime = "2021-02-03 04:05:06",

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        //ProposedNotes = "Received prepayment of $0.01",

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        ProposedSpendingLimitMicros = 10_000

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        //ProposedPurchaseOrderNumber = "PO number 12345"
    };

    // Create an operation which will add the new AccountBudgetProposal
    AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
    {
        Create = proposal
    };

    try
    {
        // Send the request to the Account Budget Proposal Service.
        MutateAccountBudgetProposalResponse response = proposalService.
            MutateAccountBudgetProposal(customerId.ToString(), operation);

        // Display the results.
        Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " +
            "was created.");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
AddAccountBudgetProposal.cs
      

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $billingSetupId
) {
    // Constructs an account budget proposal.
    $accountBudgetProposal = new AccountBudgetProposal([
        'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
        'proposal_type' => AccountBudgetProposalType::CREATE,
        'proposed_name' => 'Account Budget (example)',
        // Specifies the account budget starts immediately.
        'proposed_start_time_type' => TimeType::NOW,
        // Alternatively you can specify a specific start time. Refer to the
        // AccountBudgetProposal class for allowed formats.
        //
        // 'proposed_start_date_time' => '2020-01-02 03:04:05',

        // Specify that the budget runs forever.
        'proposed_end_time_type' => TimeType::FOREVER,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        // 'proposed_end_date_time' => '2021-02-03 04:05:06',

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        // 'proposed_notes' => 'Received prepayment of $0.01',

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        // 'proposed_purchase_order_number' => 'PO number 12345',

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        'proposed_spending_limit_micros' => 10000
    ]);

    $accountBudgetProposalOperation = new AccountBudgetProposalOperation();
    $accountBudgetProposalOperation->setCreate($accountBudgetProposal);

    // Issues a mutate request to add the account budget proposal.
    $accountBudgetProposalServiceClient =
        $googleAdsClient->getAccountBudgetProposalServiceClient();
    $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal(
        MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation)
    );

    printf(
        "Added an account budget proposal with resource name '%s'.%s",
        $response->getResult()->getResourceName(),
        PHP_EOL
    );
}
AddAccountBudgetProposal.php
      

Python

def main(client, customer_id, billing_setup_id):
    account_budget_proposal_service = client.get_service(
        "AccountBudgetProposalService"
    )
    billing_setup_service = client.get_service("BillingSetupService")

    account_budget_proposal_operation = client.get_type(
        "AccountBudgetProposalOperation"
    )
    proposal = account_budget_proposal_operation.create

    proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE
    proposal.billing_setup = billing_setup_service.billing_setup_path(
        customer_id, billing_setup_id
    )
    proposal.proposed_name = "Account Budget Proposal (example)"

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever
    proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not effect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'
    proposal.proposed_spending_limit_micros = 10000

    account_budget_proposal_response = (
        account_budget_proposal_service.mutate_account_budget_proposal(
            customer_id=customer_id,
            operation=account_budget_proposal_operation,
        )
    )
    print(
        "Created account budget proposal "
        f'"{account_budget_proposal_response.result.resource_name}".'
    )
add_account_budget_proposal.py
      

Ruby

def add_account_budget_proposal(customer_id, billing_setup_id)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new


  operation = client.operation.create_resource.account_budget_proposal do |proposal|
    proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
    proposal.proposal_type = :CREATE
    proposal.proposed_name = 'Account Budget (example)'

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = :NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever.
    proposal.proposed_end_time_type = :FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not affect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'

    # Set the spending limit to 0.01, measured in the Google Ads account currency.
    proposal.proposed_spending_limit_micros = 10_000
  end

  account_budget_proposal_service = client.service.account_budget_proposal
  # Add budget proposal.
  response = account_budget_proposal_service.mutate_account_budget_proposal(
    customer_id: customer_id,
    operation: operation,
  )

  puts sprintf("Created budget proposal %s.",
      response.results.first.resource_name)
end
add_account_budget_proposal.rb
      

Perl

sub add_account_budget_proposal {
  my ($api_client, $customer_id, $billing_setup_id) = @_;

  # Create an account budget proposal.
  my $account_budget_proposal =
    Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
      billingSetup =>
        Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
        $customer_id, $billing_setup_id
        ),
      proposalType => CREATE,
      proposedName => "Account Budget (example)",
      # Specify that the account budget starts immediately.
      proposedStartTimeType => NOW,
      # Alternatively you can specify a specific start time. Refer to the
      # AccountBudgetProposal class for allowed formats.
      #
      # proposedStartDateTime => "2020-01-02 03:04:05",

      # Specify that the account budget runs forever.
      proposedEndDateTime => FOREVER,
      # Alternatively you can specify a specific end time. Allowed formats are as below.
      # proposedEndDateTime => "2021-02-03 04:05:06",

      # Optional: set notes for the budget. These are free text and do not effect budget
      # delivery.
      # proposedNotes => "Received prepayment of $0.01",

      # Optional: set PO number for record keeping. This value is at the user's
      # discretion, and has no effect on Google Billing & Payments.
      # proposedPurchaseOrderNumber => "PO number 12345",

      # Set the spending limit to 0.01, measured in the Google Ads account currency.
      proposedSpendingLimitMicros => 10000
    });

  # Create an account budget proposal operation.
  my $account_budget_proposal_operation =
    Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal
    });

  # Add the account budget proposal.
  my $account_budget_proposal_response =
    $api_client->AccountBudgetProposalService()->mutate({
      customerId => $customer_id,
      operation  => $account_budget_proposal_operation
    });

  printf "Created account budget proposal '%s'.\n",
    $account_budget_proposal_response->{result}{resourceName};

  return 1;
}
add_account_budget_proposal.pl
      

Not: Müşteri başına yalnızca bir etkin hesap bütçesine izin verilir. Yeni bir mevcut tüm bütçelerin bitiş tarihi, yeni hesap bütçesinden önce yeni bütçenin başlangıç tarihini girin.

Hesap bütçesi teklif isteklerinde, proposed_start_date_time ve proposed_end_date_time her zaman müşterinin hesabının saat dilimindedir; saat dilimi belirtemezsiniz. İlgili içeriği oluşturmak için kullanılan önerilen harcama sınırı her zaman hesabın para biriminde ölçülür; bunu "micro" kullanarak belirtin birimler yani 1,00 ABD doları = 1.000.000 mikro.

İsteğe bağlı olarak, bilgileri faturaya koyabilirsiniz. Bu özelliğin bütçe dağıtımı üzerinde herhangi bir etkisi yoktur.

Beklemedeki bir hesap bütçesi teklifi kaldırılıyor

Beklemedeki bir bütçe teklifinin tamamını kaldırmak için AccountBudgetProposalOperation Remove isteğidir. Ancak, birkaç dakika içinde uygulanmasını sağlar.

Java

ziyaret edin.

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setRemove(StringValue.of(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId)))
  .build();

// Send request to Google Ads API (not shown).

C#

ziyaret edin.

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
    Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId)
};

// Send request to Google Ads API (not shown).

PHP

ziyaret edin.

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId));

// Send request to Google Ads API (not shown).

Python

ziyaret edin.

account_budget_proposal_service = client.get_service('AccountBudgetProposalService')
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.remove
proposal.resource_name = account_budget_proposal_service.account_budget_proposal_path(customer_id, account_budget_proposal_id):

# Send request to Google Ads API (not shown).

Ruby

ziyaret edin.

operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      remove => Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
          $customer_id, $account_budget_proposal_id
        )
    });

# Send request to Google Ads API (not shown).

Orijinal teklifte hata yaptıysanız söz konusu UPDATE işlemi olarak sunar. Daha fazla bilgi için Daha fazla bilgi için aşağıdaki Mevcut hesap bütçelerini yönetme bölümüne bakın.

Mevcut hesap bütçelerini alma

Aşağıdaki GAQL sorgusu, bir hesaptaki tüm mevcut hesap bütçelerini getirir:

SELECT
  account_budget.status,
  account_budget.billing_setup,
  account_budget.approved_spending_limit_micros,
  account_budget.approved_spending_limit_type,
  account_budget.proposed_spending_limit_micros,
  account_budget.proposed_spending_limit_type,
  account_budget.adjusted_spending_limit_micros,
  account_budget.adjusted_spending_limit_type,
  account_budget.approved_start_date_time,
  account_budget.proposed_start_date_time,
  account_budget.approved_end_date_time,
  account_budget.approved_end_time_type,
  account_budget.proposed_end_date_time,
  account_budget.proposed_end_time_type
FROM
  account_budget

Önemli Nokta: approved_start_date_time, hesap için her zaman boş olacaktır bütçeleri kontrol etmektir. Bunun yerine proposed_start_date_time politikasını kullanın.

Hesap bütçesinin başlangıç zamanını, bitiş zamanını ve harcama sınırı, proposed ve Başlangıçta önerilen değerlerin karşılaştırılmasına olanak tanıyan approved bu mümkün. Harcama sınırında adjusted öneki ile Onaylanan tutar üzerinde düzenlemeler uygulandı.

Hesap bütçesinin onaylanmış harcama sınırı zaman içinde şu şekilde ayarlanabilir: bütçe fazla yayın ve geçersiz tıklama gibi unsurlara ilişkin çeşitli kredileri yansıtır kuponlar oluşturabilirsiniz. Daha fazla bilgi hakkında hesap kredileri ve düzenlemeler Google Ads Yardım Merkezi'nde bulabilirsiniz.

Mevcut tüm hesapların yanı sıra onay bekleyen yeni hesap bütçeleri güncellemeleri beklemede olan bütçeler de pending_proposal alanı bunu tercih edebilirsiniz. Bu sonuçta kaynak kimliği / ilişkilendirilmiş AccountBudgetProposal nesnesini tanımlayın.

Kod örnekleri

Her istemci kitaplığının Billing klasörü, isteğin tamamını gösteren bir kod örneği içerir:

Java

ziyaret edin. Hesap bütçeleri alma

C#

ziyaret edin. Hesap bütçeleri alma

PHP

ziyaret edin. Hesap bütçeleri alma

Python

ziyaret edin. Hesap bütçeleri alma

Ruby

ziyaret edin. Hesap bütçeleri alma

Per

ziyaret edin. Hesap bütçeleri alma

Mevcut hesap bütçelerini yönetme

Bir müşteri için hesap bütçesi oluşturduktan sonra, AccountBudgetProposalService - bütçe parametrelerini yönetebilir. En yaygın yönetim operasyonları, spending_limit ve end_date_time alanlarını güncelleyin. Projenin tam listesi için alanlar varsa, AccountBudgetProposal uygulayacaksınız.

Mevcut bir hesap bütçesini güncelleyebilir veya gösterilir. Her ikisi de burada gösterilir.

Mevcut hesap bütçesini güncelleme

Mevcut hesap bütçesi alanlarını AccountBudgetProposal nesne şununla: AccountBudgetProposalType UPDATE olarak ayarlandı. Güncellenen alanları şurada da belirtmeniz gerektiğini unutmayın: işlemin UpdateMask bağımsız değişkeni.

Aşağıdaki snippet, önerilen harcama sınırının nasıl güncelleneceğini gösterir tercih edebilirsiniz.

Java

ziyaret edin.

AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.UPDATE)
  .setAccountBudget(accountBudget.getResourceName())
  .setProposedSpendingLimitMicros(
    accountBudget.getProposedSpendingLimitMicros().getValue() + increaseAmount)
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .setUpdateMask(
      FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit")).build())
  .build();

// Send request to Google Ads API (not shown).

C#

ziyaret edin.

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Update,
  AccountBudget = accountBudget.ResourceName,
  ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal,
  UpdateMask = new FieldMask()
  {
    Paths = { "proposed_spending_limit" }
  }
};

// Send request to Google Ads API (not shown).

PHP

ziyaret edin.

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::UPDATE,
  'account_budget' => $accountBudget->getResourceName(),
  'proposed_spending_limit_micros' =>
    $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount])

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);
$accountBudgetProposalOperation->setUpdateMask(
  FieldMasks::allSetFieldsOf($accountBudgetProposal)
);

// Send request to Google Ads API (not shown).

Python

ziyaret edin.

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')

proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').UPDATE
proposal.account_budget = account_budget
proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount

field_mask = protobuf_helpers.field_mask(None, proposal)
account_budget_proposal_operation.update_mask.CopyFrom(field_mask)

# Send request to Google Ads API (not shown).

Ruby

ziyaret edin.

proposal = client.resource.account_budget_proposal
proposal.proposal_type = :UPDATE

mask = client.field_mask.with proposal do
  proposal.account_budget = account_budget.resource_name
  proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount
end

operation = client.operation.account_budget_proposal do |op|
  op.create = proposal
  op.update_mask = mask
end

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => UPDATE,
    accountBudget => $account_budget->{resourceName},
    proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount});

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal,
      updateMask => all_set_fields_of($account_budget_proposal)});

# Send request to Google Ads API (not shown).

Hesap bütçesi zinciri

Google Ads, mevcut bütçeyi güncellemeye alternatif olarak birden fazla hesap bütçesinin olması gerekir. Aşağıdaki örnekte, Müşteri, her ay farklı harcama sınırlarına sahip.

Bu, üç adet şablon oluşturarak elde edilebilir. AccountBudgetProposal nesne ve onları bir sonraki AccountBudgetProposalService.

Aşağıdaki snippet, mevcut bir faturalandırma ayarları.

Java

ziyaret edin.

AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("May budget")
  .setProposedStartDateTime("2018-05-01")
  .setProposedEndDateTime("2018-06-01")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("June budget")
  .setProposedStartDateTime("2018-06-01")
  .setProposedEndDateTime("2018-07-01")
  .setProposedSpendingLimitMicros(5_000_000_000L)
  .build();

AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("July budget")
  .setProposedStartDateTime("2018-07-01")
  .setProposedEndDateTime("2018-08-01")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

// Send request to Google Ads API (not shown).

C#

ziyaret edin.

AccountBudgetProposal proposalMay = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "May budget",
  ProposedStartDateTime = "2018-05-01",
  ProposedEndDateTime = "2018-06-01",
  ProposedSpendingLimitMicros = 1_000_000_000
}

AccountBudgetProposal proposalJune = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "June budget",
  ProposedStartDateTime = "2018-06-01",
  ProposedEndDateTime = "2018-07-01",
  ProposedSpendingLimitMicros = 5_000_000_000
}

AccountBudgetProposal proposalJuly = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "July budget",
  ProposedStartDateTime = "2018-07-01",
  ProposedEndDateTime = "2018-08-01",
  ProposedSpendingLimitMicros = 1_000_000_000
}

// Send request to Google Ads API (not shown).

PHP

ziyaret edin.

$proposalMay = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'May budget',
  'proposed_start_date_time' => '2018-05-01',
  'proposed_end_date_time' => '2018-06-01',
  'proposed_spending_limit_micros' => 1000000000
]);

$proposalJune = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'June budget',
  'proposed_start_date_time' => '2018-06-01',
  'proposed_end_date_time' => '2018-07-01',
  'proposed_spending_limit_micros' => 5000000000
]);

$proposalJuly = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'July budget',
  'proposed_start_date_time' => '2018-07-01',
  'proposed_end_date_time' => '2018-08-01',
  'proposed_spending_limit_micros' => 1000000000
]);

// Send request to Google Ads API (not shown).

Python

ziyaret edin.

may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalMay = may_account_budget_proposal_operation.create
proposalMay.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalMay.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalMay.proposed_name = 'May budget'
proposalMay.proposed_start_date_time = '2018-05-01'
proposalMay.proposed_end_date_time = '2018-06-01'
proposalMay.proposed_spending_limit_micros = 1000000000

june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalJune = may_account_budget_proposal_operation.create
proposalJune.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalJune.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalJune.proposed_name = 'June budget'
proposalJune.proposed_start_date_time = '2018-06-01'
proposalJune.proposed_end_date_time = '2018-07-01'
proposalJune.proposed_spending_limit_micros = 5000000000

july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalJuly = may_account_budget_proposal_operation.create
proposalJuly.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalJuly.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalJuly.proposed_name = 'July budget'
proposalJuly.proposed_start_date_time = '2018-07-01'
proposalJuly.proposed_end_date_time = '2018-08-01'
proposalJuly.proposed_spending_limit_micros = 1000000000

# Send request to Google Ads API (not shown).

Ruby

ziyaret edin.

proposal_may = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'May budget'
  proposal.proposed_start_date_time = '2018-05-01'
  proposal.proposed_end_date_time = '2018-06-01'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

proposal_june = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'June budget'
  proposal.proposed_start_date_time = '2018-06-01'
  proposal.proposed_end_date_time = '2018-07-01'
  proposal.proposed_spending_limit_micros = 5_000_000_000
end

proposal_july = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'July budget'
  proposal.proposed_start_date_time = '2018-07-01'
  proposal.proposed_end_date_time = '2018-08-01'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

# Send request to Google Ads API (not shown).

Perl

my $may_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "May budget",
    proposedStartDateTime => "2018-05-01",
    proposedEndDateTime => "2018-06-01",
    proposedSpendingLimitMicros => 1000000000
  });

my $june_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "June budget",
    proposedStartDateTime => "2018-06-01",
    proposedEndDateTime => "2018-07-01",
    proposedSpendingLimitMicros => 5000000000
  });

my $july_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "July budget",
    proposedStartDateTime => "2018-07-01",
    proposedEndDateTime => "2018-08-01",
    proposedSpendingLimitMicros => 1000000000
  });

# Send request to Google Ads API (not shown).

Lütfen AccountBudgetProposalType.CREATE anlamına gelir. Bu şekilde, bütçenizi güncellemek yerine üç ayrı bütçe oluşturabilirsiniz anlamına gelir.

Hesap bütçelerini sonlandırma

Hesap bütçeleri etkin durumdayken sonlandırılabilir ve onay beklerken kullanabilirsiniz.

Etkin hesap bütçesini sonlandırma

Etkin hesap bütçesi kaldırılamaz. Ancak, bitiş zamanını ayarlayabilirsiniz. geçerli zamana göre ayarlayın. Bunu sağlamanın en basit yolu, AccountBudgetProposalType.END.

Aşağıdaki snippet, mevcut bir hesap bütçesinin nasıl sonlandırılacağını gösterir.

Java

ziyaret edin.

AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.END)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

// Send request to Google Ads API (not shown).

C#

ziyaret edin.

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.End,
  AccountBudget = accountBudget.ResourceName
};

// Send request to Google Ads API (not shown).

PHP

ziyaret edin.

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::END,
  'account_budget' => $accountBudget->getResourceName()
])

// Send request to Google Ads API (not shown).

Python

ziyaret edin.

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').END
proposal.account_budget = account_budget

# Send request to Google Ads API (not shown).

Ruby

ziyaret edin.

proposal = client.resource.account_budget_proposal
proposal.proposal_type = :END
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => END,
    accountBudget => $account_budget->{resourceName});

# Send request to Google Ads API (not shown).

Bu, bir hesap bütçesinin bitiş tarihi ve bütçe tarih ve saat TimeType.NOW olarak değiştirildi.

Onaylanmış bir hesap bütçesinin başlangıç zamanından önce kaldırılması

Gelecekte başlaması için bir hesap bütçesi önerdiyseniz, bu bütçeyi e-postayı yanıtlayarak AccountBudgetProposalType.REMOVE teklif türünü seçin.

Aşağıdaki snippet, gelecekteki mevcut bir hesabın kaldırılmasını göstermektedir kullanabilirsiniz.

Java

ziyaret edin.

AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.REMOVE)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

// Send request to Google Ads API (not shown).

C#

ziyaret edin.

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Remove,
  AccountBudget = accountBudget.ResourceName
};

// Send request to Google Ads API (not shown).

PHP

ziyaret edin.

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::REMOVE,
  'account_budget' => $accountBudget->getResourceName()
])

// Send request to Google Ads API (not shown).

Python

ziyaret edin.

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').REMOVE
proposal.account_budget = account_budget

# Send request to Google Ads API (not shown).

Ruby

ziyaret edin.

proposal = client.resource.account_budget_proposal
proposal.proposal_type = :REMOVE
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => REMOVE,
    accountBudget => $account_budget->{resourceName});

# Send request to Google Ads API (not shown).