Esta página foi traduzida pela API Cloud Translation.

Fazer upload de conversões de chamada

É possível usar a API Google Ads para fazer o upload de conversões de chamada off-line no Google Ads e acompanhar quando os anúncios geram ligações e quando essas chamadas geram ações valiosas dos clientes.

Não é possível fazer o upload de um clique para ligar (em smartphones) como conversão se não houver um número de encaminhamento de chamadas do Google relacionado à chamada. Sem esse número, não há como o Google ter certeza de que o clique levou a uma chamada e, em seguida, a uma conversão. Se um clique for enviado dessa forma, ele será ignorado pela ação de conversão.

Mapear para a interface do Google Ads é o mesmo que usar a origem de conversão Uploads seguida de escolher Conversões de chamadas.

Criar uma conversão de chamada

Alguns pontos a serem considerados ao criar um CallConversion:

A partir da versão v15 da API Google Ads, você precisa preencher o campo consent do objeto CallConversion.
O atributo partial_failure do UploadCallConversionsRequest precisa sempre ser definido como true. Siga as diretrizes para falhas parciais ao processar operações válidas e com falha simultaneamente.
Se você encontrar uma mensagem de resposta TOO_RECENT_CONVERSION_ACTION ou TOO_RECENT_CALL para uma solicitação de conversão de upload, aguarde 6 ou 12 horas, respectivamente, antes de repetir as linhas com falha.
Pode levar até três horas para que as estatísticas de conversão importadas apareçam na sua conta do Google Ads.
Se você fizer o upload de conversões duplicadas (ou seja, um CallConversion com caller_id, conversion_date_time e conversion_action que foram enviados anteriormente), um erro CALL_CONVERSION_ALREADY_EXISTS será retornado.
- Se uma única solicitação tiver várias operações para a mesma conversão, um erro DUPLICATE_CALL_CONVERSION_IN_REQUEST será retornado.

Fazer o upload de uma conversão de chamada

Para associar suas conversões de chamada off-line a uma ação de conversão, você precisa das seguintes informações: o identificador de chamadas (número de telefone), a data e hora da conversão, o nome do recurso da ação de conversão e, opcionalmente, o valor da conversão e a moeda para ConversionUploadService. Para mais detalhes sobre as diferentes entradas, consulte nosso artigo da Central de Ajuda. O exemplo de código também descreve os formatos para as diferentes entradas.

Requisitos

Há vários requisitos que precisam ser atendidos ao fazer upload de um CallConversion.

Para evitar um erro ConversionUploadError.INVALID_CONVERSION_ACTION, o atributo conversion_action precisa se referir a um ConversionAction em que:

O ConversionActionType é UPLOAD_CALLS.
O status do ConversionAction é ENABLED. Caso contrário, a operação falhará com um erro NO_CONVERSION_ACTION_FOUND.
O ConversionAction existe no cliente de conversão do Google Ads da conta do Google Ads que recebeu o clique.

Recomendamos também definir ConversionAction.category como a categoria que melhor descreve suas conversões.

Além disso, as condições a seguir precisam ser atendidas:

No momento da chamada, o acompanhamento de conversões estava ativado no cliente de conversões do Google Ads da conta do Google Ads associada.
O customer_id do UploadCallConversionsRequest precisa ser o ID do cliente de conversão do Google Ads da conta do Google Ads da chamada. Caso contrário, o upload da conversão vai resultar em um erro ConversionUploadError.INVALID_CUSTOMER_FOR_CALL.
O conversion_value precisa ser maior ou igual a zero.
O conversion_date_time precisa ter um fuso horário especificado, e o formato é yyyy-mm-dd HH:mm:ss+|-HH:mm, por exemplo: 2022-01-01 19:32:45-05:00 (ignorando o horário de verão). O fuso horário pode ser para qualquer valor válido: ele não precisa corresponder ao fuso horário da conta.

Exemplo de código

Java

private void runExample(
    GoogleAdsClient googleAdsClient,
    long customerId,
    String conversionActionId,
    String callerId,
    String callStartDateTime,
    double conversionValue,
    Long conversionCustomVariableId,
    String conversionCustomVariableValue,
    ConsentStatus adUserDataConsent) {
  // Create a call conversion by specifying currency as USD.
  CallConversion.Builder conversionBuilder =
      CallConversion.newBuilder()
          .setConversionAction(conversionActionId)
          .setCallerId(callerId)
          .setCallStartDateTime(callStartDateTime)
          .setConversionValue(conversionValue)
          .setCurrencyCode("USD");

  if (conversionCustomVariableId != null && conversionCustomVariableValue != null) {
    conversionBuilder.addCustomVariables(
        CustomVariable.newBuilder()
            .setConversionCustomVariable(
                ResourceNames.conversionCustomVariable(customerId, conversionCustomVariableId))
            .setValue(conversionCustomVariableValue));
  }

  // Sets the consent information, if provided.
  if (adUserDataConsent != null) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    conversionBuilder.setConsent(Consent.newBuilder().setAdUserData(adUserDataConsent));
  }

  CallConversion conversion = conversionBuilder.build();

  // Uploads the call conversion to the API.
  try (ConversionUploadServiceClient conversionUploadServiceClient =
      googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
    // Partial failure MUST be enabled for this request.

    // NOTE: This request contains a single conversion as a demonstration.  However, if you have
    // multiple conversions to upload, it's best to upload multiple conversions per request
    // instead of sending a separate request per conversion. See the following for per-request
    // limits:
    // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    UploadCallConversionsResponse response =
        conversionUploadServiceClient.uploadCallConversions(
            UploadCallConversionsRequest.newBuilder()
                .setCustomerId(String.valueOf(customerId))
                .setCustomerId(Long.toString(customerId))
                .addConversions(conversion)
                .setPartialFailure(true)
                .build());

    // Prints any partial failure errors returned.
    if (response.hasPartialFailureError()) {
      GoogleAdsFailure googleAdsFailure =
          ErrorUtils.getInstance().getGoogleAdsFailure(response.getPartialFailureError());
      googleAdsFailure
          .getErrorsList()
          .forEach(e -> System.out.println("Partial failure occurred: " + e.getMessage()));
      throw new RuntimeException(
          "Partial failure occurred " + response.getPartialFailureError().getMessage());
    }

    // Prints the result if valid.
    CallConversionResult result = response.getResults(0);
    System.out.printf(
        "Uploaded call conversion that occurred at '%' for caller ID '%' to the conversion"
            + " action with resource name '%'.%n",
        result.getCallStartDateTime(), result.getCallerId(), result.getConversionAction());
  }
}UploadCallConversion.java

C#

public void Run(GoogleAdsClient client, long customerId,
    long conversionActionId, string callerId, string callStartTime,
    string conversionTime, double conversionValue,
    long? conversionCustomVariableId, string conversionCustomVariableValue,
    ConsentStatus? adUserDataConsent)
{
    // Get the ConversionUploadService.
    ConversionUploadServiceClient conversionUploadService =
        client.GetService(Services.V16.ConversionUploadService);

    // Create a call conversion by specifying currency as USD.
    CallConversion callConversion = new CallConversion()
    {
        ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId),
        CallerId = callerId,
        CallStartDateTime = callStartTime,
        ConversionDateTime = conversionTime,
        ConversionValue = conversionValue,
        CurrencyCode = "USD",
    };

    if (adUserDataConsent != null)
    {
        // Specifies whether user consent was obtained for the data you are uploading. See
        // https://www.google.com/about/company/user-consent-policy
        // for details.
        callConversion.Consent = new Consent()
        {
            AdUserData = (ConsentStatus)adUserDataConsent
        };
    }

    if (conversionCustomVariableId != null &&
        !string.IsNullOrEmpty(conversionCustomVariableValue))
    {
        callConversion.CustomVariables.Add(new CustomVariable()
        {
            ConversionCustomVariable = ResourceNames.ConversionCustomVariable(
                customerId, conversionCustomVariableId.Value),
            Value = conversionCustomVariableValue
        });
    }

    UploadCallConversionsRequest request = new UploadCallConversionsRequest()
    {
        CustomerId = customerId.ToString(),
        Conversions = { callConversion },
        PartialFailure = true
    };

    try
    {
        // Issues a request to upload the call conversion. The partialFailure parameter
        // is set to true, and validateOnly parameter to false as required by this method
        // call.
        // NOTE: This request contains a single conversion as a demonstration.  However, if
        // you have multiple conversions to upload, it's best to upload multiple conversions
        // per request instead of sending a separate request per conversion. See the
        // following for per-request limits:
        // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
        UploadCallConversionsResponse response =
            conversionUploadService.UploadCallConversions(request);

        // Since we set partialFailure = true, we can retrieve error messages (if any) from
        // the operation response.
        if (response.PartialFailureError != null)
        {
            Console.WriteLine("Call conversion upload failed.");

            // Retrieves the errors from the partial failure and prints them.
            List<GoogleAdsError> errors =
                response.PartialFailure.GetErrorsByOperationIndex(0);
            foreach (GoogleAdsError error in errors)
            {
                Console.WriteLine($"Operation failed with error: {error}.");
            }
        }
        else
        {
            // Prints the result.
            CallConversionResult uploadedCallConversion = response.Results[0];
            Console.WriteLine($"Uploaded call conversion that occurred at " +
                $"'{uploadedCallConversion.CallStartDateTime}' for caller ID " +
                $"'{uploadedCallConversion.CallerId}' to the conversion action with " +
                $"resource name '{uploadedCallConversion.ConversionAction}'.");
        }

    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}UploadCallConversion.cs

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $conversionActionId,
    string $callerId,
    string $callStartDateTime,
    string $conversionDateTime,
    float $conversionValue,
    ?string $conversionCustomVariableId,
    ?string $conversionCustomVariableValue,
    ?int $adUserDataConsent
) {
    // Creates a call conversion by specifying currency as USD.
    $callConversion = new CallConversion([
        'conversion_action' =>
            ResourceNames::forConversionAction($customerId, $conversionActionId),
        'caller_id' => $callerId,
        'call_start_date_time' => $callStartDateTime,
        'conversion_date_time' => $conversionDateTime,
        'conversion_value' => $conversionValue,
        'currency_code' => 'USD'
    ]);
    if (!is_null($conversionCustomVariableId) && !is_null($conversionCustomVariableValue)) {
        $callConversion->setCustomVariables([new CustomVariable([
            'conversion_custom_variable' => ResourceNames::forConversionCustomVariable(
                $customerId,
                $conversionCustomVariableId
            ),
            'value' => $conversionCustomVariableValue
        ])]);
    }
    // Sets the consent information, if provided.
    if (!empty($adUserDataConsent)) {
        // Specifies whether user consent was obtained for the data you are uploading. See
        // https://www.google.com/about/company/user-consent-policy for details.
        $callConversion->setConsent(new Consent(['ad_user_data' => $adUserDataConsent]));
    }

    // Issues a request to upload the call conversion.
    $conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
    // NOTE: This request contains a single conversion as a demonstration.  However, if you have
    // multiple conversions to upload, it's best to upload multiple conversions per request
    // instead of sending a separate request per conversion. See the following for per-request
    // limits:
    // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    $response = $conversionUploadServiceClient->uploadCallConversions(
        // Partial failure MUST be enabled for this request.
        UploadCallConversionsRequest::build($customerId, [$callConversion], true)
    );

    // Prints the status message if any partial failure error is returned.
    // Note: The details of each partial failure error are not printed here, you can refer to
    // the example HandlePartialFailure.php to learn more.
    if ($response->hasPartialFailureError()) {
        printf(
            "Partial failures occurred: '%s'.%s",
            $response->getPartialFailureError()->getMessage(),
            PHP_EOL
        );
    } else {
        // Prints the result if exists.
        /** @var CallConversionResult $uploadedCallConversion */
        $uploadedCallConversion = $response->getResults()[0];
        printf(
            "Uploaded call conversion that occurred at '%s' for caller ID '%s' to the "
            . "conversion action with resource name '%s'.%s",
            $uploadedCallConversion->getCallStartDateTime(),
            $uploadedCallConversion->getCallerId(),
            $uploadedCallConversion->getConversionAction(),
            PHP_EOL
        );
    }
}UploadCallConversion.php

Python

def main(
    client,
    customer_id,
    conversion_action_id,
    caller_id,
    call_start_date_time,
    conversion_date_time,
    conversion_value,
    conversion_custom_variable_id,
    conversion_custom_variable_value,
    ad_user_data_consent,
):
    """Imports offline call conversion values for calls related to your ads.

    Args:
        client: An initialized GoogleAdsClient instance.
        customer_id: The client customer ID string.
        conversion_action_id: The ID of the conversion action to upload to.
        caller_id: The caller ID from which this call was placed. Caller ID is
            expected to be in E.164 format with preceding '+' sign,
            e.g. '+18005550100'.
        call_start_date_time: The date and time at which the call occurred. The
            format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
            e.g. '2021-01-01 12:32:45-08:00'.
        conversion_date_time: The the date and time of the conversion (should be
            after the click time). The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
            e.g. '2021-01-01 12:32:45-08:00'.
        conversion_value: The conversion value in the desired currency.
        conversion_custom_variable_id: The ID of the conversion custom
            variable to associate with the upload.
        conversion_custom_variable_value: The str value of the conversion custom
            variable to associate with the upload.
        ad_user_data_consent: The consent status for ad user data for all
            members in the job.
    """
    # Get the ConversionUploadService client.
    conversion_upload_service = client.get_service("ConversionUploadService")

    # Create a call conversion in USD currency.
    call_conversion = client.get_type("CallConversion")
    call_conversion.conversion_action = client.get_service(
        "ConversionActionService"
    ).conversion_action_path(customer_id, conversion_action_id)
    call_conversion.caller_id = caller_id
    call_conversion.call_start_date_time = call_start_date_time
    call_conversion.conversion_date_time = conversion_date_time
    call_conversion.conversion_value = conversion_value
    call_conversion.currency_code = "USD"

    if conversion_custom_variable_id and conversion_custom_variable_value:
        conversion_custom_variable = client.get_type("CustomVariable")
        conversion_custom_variable.conversion_custom_variable = (
            conversion_custom_variable_id
        )
        conversion_custom_variable.value = conversion_custom_variable_value
        call_conversion.custom_variables.append(conversion_custom_variable)

    # Specifies whether user consent was obtained for the data you are
    # uploading. For more details. see:
    # https://www.google.com/about/company/user-consent-policy
    if ad_user_data_consent:
        call_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
            ad_user_data_consent
        ]

    # Issue a request to upload the call conversion.
    # Partial failure MUST be enabled for this request.
    request = client.get_type("UploadCallConversionsRequest")
    request.customer_id = customer_id
    request.conversions = [call_conversion]
    request.partial_failure = True
    # NOTE: This request only uploads a single conversion, but if you have
    # multiple conversions to upload, it's most efficient to upload them in a
    # single request. See the following for per-request limits for reference:
    # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    upload_call_conversions_response = (
        conversion_upload_service.upload_call_conversions(request=request)
    )

    # Print any partial errors returned.
    if upload_call_conversions_response.partial_failure_error:
        print(
            "Partial error occurred: "
            f"'{upload_call_conversions_response.partial_failure_error.message}'"
        )

    # Print the result if valid.
    uploaded_call_conversion = upload_call_conversions_response.results[0]
    if uploaded_call_conversion.call_start_date_time:
        print(
            "Uploaded call conversion that occurred at "
            f"'{uploaded_call_conversion.call_start_date_time}' "
            f"for caller ID '{uploaded_call_conversion.caller_id}' "
            "to the conversion action with resource name "
            f"'{uploaded_call_conversion.conversion_action}'."
        )upload_call_conversion.py

Ruby

def upload_call_conversion(
  customer_id,
  conversion_action_id,
  caller_id,
  call_start_date_time,
  conversion_date_time,
  conversion_value,
  conversion_custom_variable_id,
  conversion_custom_variable_value,
  ad_user_data_consent)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new

  # Create a call conversion by specifying currency as USD.
  call_conversion = client.resource.call_conversion do |c|
    c.conversion_action = client.path.conversion_action(
      customer_id, conversion_action_id)
    c.caller_id = caller_id
    c.call_start_date_time = call_start_date_time
    c.conversion_date_time = conversion_date_time
    c.conversion_value = conversion_value
    c.currency_code = "USD"
    if conversion_custom_variable_id && conversion_custom_variable_value
      c.custom_variables << client.resource.custom_variable do |cv|
        cv.conversion_custom_variable = client.path.conversion_custom_variable(
          customer_id, conversion_custom_variable_id)
        cv.value = conversion_custom_variable_value
      end
    end

    unless ad_user_data_consent.nil?
      c.consent = client.resource.consent do |c|
        # Specifies whether user consent was obtained for the data you are
        # uploading. For more details, see:
        # https://www.google.com/about/company/user-consent-policy
        c.ad_user_data = ad_user_data_consent
      end
    end
  end

  # Issues a request to upload the call conversion.
  response = client.service.conversion_upload.upload_call_conversions(
    customer_id: customer_id,
    # NOTE: This request only uploads a single conversion, but if you have
    # multiple conversions to upload, it's most efficient to upload them in a
    # single request. See the following for per-request limits for reference:
    # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    conversions: [call_conversion],
    partial_failure: true
  )

  # Prints errors if any partial failure error is returned.
  if response.partial_failure_error
    failures = client.decode_partial_failure_error(response.partial_failure_error)
    failures.each do |failure|
      failure.errors.each do |error|
        human_readable_error_path = error
          .location
          .field_path_elements
          .map { |location_info|
            if location_info.index
              "#{location_info.field_name}[#{location_info.index}]"
            else
              "#{location_info.field_name}"
            end
          }.join(" > ")

        errmsg =  "error occured while adding operations " \
          "#{human_readable_error_path}" \
          " with value: #{error.trigger.string_value}" \
          " because #{error.message.downcase}"
        puts errmsg
      end
    end
  else
    # Print the result if valid.
    uploaded_call_conversion = response.results.first
    puts "Uploaded call conversion that occurred at " \
      "#{uploaded_call_conversion.call_start_date_time} " \
      "for caller ID " \
      "#{uploaded_call_conversion.caller_id} " \
      "to the conversion action with resource name " \
      "#{uploaded_call_conversion.conversion_action}"
  end
endupload_call_conversion.rb

Perl

sub upload_call_conversion {
  my (
    $api_client,                       $customer_id,
    $conversion_action_id,             $caller_id,
    $call_start_date_time,             $conversion_date_time,
    $conversion_value,                 $conversion_custom_variable_id,
    $conversion_custom_variable_value, $ad_user_data_consent
  ) = @_;

  # Create a call conversion by specifying currency as USD.
  my $call_conversion =
    Google::Ads::GoogleAds::V16::Services::ConversionUploadService::CallConversion
    ->new({
      conversionAction =>
        Google::Ads::GoogleAds::V16::Utils::ResourceNames::conversion_action(
        $customer_id, $conversion_action_id
        ),
      callerId           => $caller_id,
      callStartDateTime  => $call_start_date_time,
      conversionDateTime => $conversion_date_time,
      conversionValue    => $conversion_value,
      currencyCode       => "USD"
    });

  if ($conversion_custom_variable_id && $conversion_custom_variable_value) {
    $call_conversion->{customVariables} = [
      Google::Ads::GoogleAds::V16::Services::ConversionUploadService::CustomVariable
        ->new({
          conversionCustomVariable =>
            Google::Ads::GoogleAds::V16::Utils::ResourceNames::conversion_custom_variable(
            $customer_id, $conversion_custom_variable_id
            ),
          value => $conversion_custom_variable_value
        })];
  }

  # Set the consent information, if provided.
  if ($ad_user_data_consent) {
    # Specify whether user consent was obtained for the data you are uploading.
    # See https://www.google.com/about/company/user-consent-policy for details.
    $call_conversion->{consent} =
      Google::Ads::GoogleAds::V16::Common::Consent->new({
        adUserData => $ad_user_data_consent
      });
  }

  # Issue a request to upload the call conversion.
  # NOTE: This request contains a single conversion as a demonstration.
  # However, if you have multiple conversions to upload, it's best to
  # upload multiple conversions per request instead of sending a separate
  # request per conversion. See the following for per-request limits:
  # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  my $upload_call_conversions_response =
    $api_client->ConversionUploadService()->upload_call_conversions({
      customerId     => $customer_id,
      conversions    => [$call_conversion],
      partialFailure => "true"
    });

  # Print any partial errors returned.
  if ($upload_call_conversions_response->{partialFailureError}) {
    printf "Partial error encountered: '%s'.\n",
      $upload_call_conversions_response->{partialFailureError}{message};
  }

  # Print the result if valid.
  my $uploaded_call_conversion =
    $upload_call_conversions_response->{results}[0];
  if (%$uploaded_call_conversion) {
    printf "Uploaded call conversion that occurred at '%s' " .
      "for caller ID '%s' to the conversion action with resource name '%s'.\n",
      $uploaded_call_conversion->{callStartDateTime},
      $uploaded_call_conversion->{callerId},
      $uploaded_call_conversion->{conversionAction};
  }

  return 1;
}upload_call_conversion.pl

Fazer o upload de conversões de cliques

Fazer upload de conversões de vendas na loja