Potansiyel müşteriler için gelişmiş dönüşümleri uygulayın

Potansiyel müşteriler için gelişmiş dönüşümler özelliği, verilerinizin doğruluğunu artırmanızı çevrimdışı dönüşüm ölçümü, karma oluşturma işlemi uygulanmış kullanıcı tanımlayıcıları ve Google Ads'e yardımcı olan bazı isteğe bağlı ek ayrıntılar dönüşümü potansiyel müşteri sağlayan reklama bağlamalısınız.

Başlarken sayfanızı kontrol etmeyi ve kılavuz edin ve ön koşullar seçeneğine dokunun.

Potansiyel müşteriler için gelişmiş dönüşümleri Google Ads kullanıcı arayüzünde Yardım Merkezi'nde açıklandığı şekilde veya Google Ads API üzerinden güncelleyebilirsiniz.

Entegrasyonunuzu tasarlayın

Kullanım akışı

Burada, potansiyel müşteriler için gelişmiş dönüşümleri yüklemeyle ilgili genel akışı görebilirsiniz. Google Ads API'si.

  1. Aşağıdakileri içeren ön koşulları uyguladığınızdan emin olun:

    1. Dönüşüm izlemeyi etkinleştirin.

    2. Müşteri verisi şartlarını kabul edin.

    3. Web sitenizin potansiyel müşteri formlarında etiketlemeyi yapılandırın.

    Bkz. ön koşullar inceleyebilirsiniz.

  2. Potansiyel müşteri verilerini (ör. e-posta adresi, telefon numarası ve karma oluşturma işlemi) normalleştirin ve karma oluşturma işlemi uygulayın posta adresiniz.

  3. Normalleştirilmiş ve karma oluşturma işlemi uygulanmış potansiyel müşteri verilerini ClickConversion nesnelerine yerleştirin. Her ClickConversion için:

    1. Doldur user_identifiers karma oluşturma işlemi uygulanmış potansiyel müşteri verileriyle eşleştirilmelidir. Birden fazla kullanıcınız varsa her biri için ayrı bir UserIdentifier oluşturun. kullanabilirsiniz.

    2. (İsteğe bağlı, ancak kesinlikle önerilir) Doldur order_id.

    3. (İsteğe bağlı) gclid alanını, şunun için doldurun: ne kadar iyi karşıladığını görebileceksiniz.

    4. Google Ads API'nin v15 sürümünden itibaren consent ClickConversion nesne.

    5. Ayarla conversion_action değeri type olan bir ConversionAction UPLOAD_CLICKS. Bu, ConversionAction önkoşulları yerine getirin.

  4. ClickConversion oluşturma işlemlerini ConversionUploadService, ayar partial_failure Hedef: true.

  5. Yüklemelerinizi inceleyin.

En iyi uygulamalar

Gelişmiş dönüşümleri uygularken aşağıdaki en iyi uygulamaları göz önünde bulundurun optimize edebilirsiniz.

Varsa birden fazla tanımlayıcı ekleyin

Bir dönüşüme order_id atarsanız bu değeri dahil etmenizi önemle tavsiye ederiz. Bir dönüşüm için gclid öğeniz varsa, şuna ek olarak göndermenizi öneririz: daha iyi performans için user_identifiers. Dahası, dönüşüm için birden fazla UserIdentifier varsa, birden fazla eşleşme olasılığını artırır. Tüm tanımlayıcıları aynı ClickConversion

Entegrasyonunuzu ayarlarken kısmi hata hatalarını inceleyin

Potansiyel müşteriler için gelişmiş dönüşümler entegrasyonunuzu ilk kez ayarlarken partial_failure_error alanındaki kısmi hataları inceleyip düzeltme yanıt verelim. Kurulumunuzda sorun varsa bunu incelemeniz gerekir alanına giriş yapmanız gerekir. Proje yönetimi hakkında daha fazla ayrıntı ve kısmi hata hatası işleme ile ilgili özel kısmi hata kılavuzunu ziyaret edin.

Kısmi hata hatalarını incelerken, daha fazla bilgi almak için sık hatalar tablosuna bakın. Sorun çözüldüğünde kısmi hata hatalarında bulundu ve entegrasyonunuz tamamlandı. çevrimdışı veri teşhisini kullanarak düzenli olarak incelemesini sağlar.

Birden çok dönüşümü tek bir istekte gruplandırma

Yüklenecek birden fazla dönüşümünüz varsa işlemleri tek bir dönüşümde gruplandırın UploadClickConversionsRequest istek göndermeyi tercih edebilirsiniz.

Kota kılavuzuna göz atın başlıklı makaleyi inceleyin.

Çevrimdışı veri teşhisi özelliğinin aynı mantıksal iş altında bir istek grubunu gruplandırmak istiyorsanız tüm isteklerin job_id öğesini aynı değere sahip. Bu, yükleme yaptığınız tek bir işiniz veya süreciniz varsa yararlı olabilir. birden fazla istek kullanarak çok sayıda dönüşüm elde etmesini sağlar. job_id özelliğini ayarlarsanız isteklerin her birinin aynı değere sahip olmasını istiyorsanız, daha sonra iş ilanı bildirimi job_summaries Bunun yerine Google Ads API'nin job_id parametresine sistem tarafından oluşturulmuş bir değer atamasına izin verirseniz job_summaries her istek için ayrı bir giriş içerir. işinizin genel durumunu analiz etmeyi zorlaştırabilir.

Mevcut tüm çevrimdışı dönüşüm etkinliklerini yükleyin

Dönüşüm raporlamasının eksiksiz ve doğru olması için çevrimdışı kullanılabilen tüm verileri yükleyin dönüşüm etkinlikleri (Google Ads'den gelmemiş olabilecekler dahil)

Tüm dönüşüm etkinliklerinin yüklenmesi herhangi bir etkinlik için CLICK_NOT_FOUND hataya yol açıyor Google Ads'den değil. Tüm bu hatalar yüklenirken izleme sınırlamalarına rağmen UploadClickConversionsRequest debug_enabled alanı var.

  • debug_enabled, false ise veya ayarlanmazsa Google Ads API yalnızca temel işlemleri gerçekleştirir giriş doğrulaması yapar, sonraki yükleme kontrollerini atlar ve hatta başarılı sonuç döndürür sağlanan user_identifiers için tıklama bulunamazsa.

    Bu, varsayılan ayardır.

  • debug_enabled değeri true ise Google Ads API tüm doğrulamaları gerçekleştirir ve ClickConversion için CLICK_NOT_FOUND hatası döndürür. Sağlanan user_identifiers için Google Ads dönüşümü yok.

Geliştirme ve test sırasında debug_enabled değerini true olarak ayarlayabilirsiniz ve sorunları belirleyebilirsiniz. Örneğin, bir grup dönüşümünüz varsa Google Ads dönüşümlerinden elde edildiğini bildiğiniz user_identifiers için true ayarını kullanarak yüklemelerin CLICK_NOT_FOUND hata. Ancak, geliştirme ve test aşamalarına geçtiğinizde çok fazla hata oluşmasını önlemek için debug_enabled yönergesinin false olarak ayarlanmasını öneririz.

Harici ilişkilendirme verileri kullanmayın

ClickConversion üzerinde external_attribution_data özelliğini ayarlamayın veya Harici ilişkilendirme modeli kullanan conversion_action. Google Ads şunu yapmaz: tanımlayıcılar kullanılarak yapılan yüklemeler için harici olarak ilişkilendirilen dönüşümleri destekleme

Verileri yükleme için hazırlama

Gizlilik nedeniyle, aşağıdaki verilere SHA-256 kullanılarak karma oluşturma işlemi uygulanmalıdır. yüklenmeden önce:

  • E-posta adresi
  • Telefon numarası
  • Ad
  • Soyadı
  • Açık adres

Aşağıdaki verilere karma oluşturma işlemi uygulamayın:

  • Ülke
  • Eyalet
  • Şehir
  • Posta kodu

Karma oluşturma sonuçlarını standart hale getirmek için şu değerlerden birine karma oluşturma işlemi uygulayın:

  • Baştaki ve sondaki boşlukları kaldırın.
  • Metni küçük harfe dönüştürün.
  • Telefon numaralarını E164'e göre biçimlendirin standart olarak ayarlanmıştır.
  • gmail.com ve alan adından önce gelen tüm noktaları (.) kaldırın. googlemail.com e-posta adresi.

Java

private String normalizeAndHash(MessageDigest digest, String s)
    throws UnsupportedEncodingException {
  // Normalizes by first converting all characters to lowercase, then trimming spaces.
  String normalized = s.toLowerCase();
  // Removes leading, trailing, and intermediate spaces.
  normalized = normalized.replaceAll("\\s+", "");
  // Hashes the normalized string using the hashing algorithm.
  byte[] hash = digest.digest(normalized.getBytes("UTF-8"));
  StringBuilder result = new StringBuilder();
  for (byte b : hash) {
    result.append(String.format("%02x", b));
  }

  return result.toString();
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google Ads
 * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}.
 *
 * @param digest the digest to use to hash the normalized string.
 * @param emailAddress the email address to normalize and hash.
 */
private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress)
    throws UnsupportedEncodingException {
  String normalizedEmail = emailAddress.toLowerCase();
  String[] emailParts = normalizedEmail.split("@");
  if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) {
    // Removes any '.' characters from the portion of the email address before the domain if the
    // domain is gmail.com or googlemail.com.
    emailParts[0] = emailParts[0].replaceAll("\\.", "");
    normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]);
  }
  return normalizeAndHash(digest, normalizedEmail);
}
UploadEnhancedConversionsForLeads.java

C#

/// <summary>
/// Normalizes the email address and hashes it. For this use case, Google Ads requires
/// removal of any '.' characters preceding <code>gmail.com</code> or
/// <code>googlemail.com</code>.
/// </summary>
/// <param name="emailAddress">The email address.</param>
/// <returns>The hash code.</returns>
private string NormalizeAndHashEmailAddress(string emailAddress)
{
    string normalizedEmail = emailAddress.ToLower();
    string[] emailParts = normalizedEmail.Split('@');
    if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" ||
        emailParts[1] == "googlemail.com"))
    {
        // Removes any '.' characters from the portion of the email address before
        // the domain if the domain is gmail.com or googlemail.com.
        emailParts[0] = emailParts[0].Replace(".", "");
        normalizedEmail = $"{emailParts[0]}@{emailParts[1]}";
    }
    return NormalizeAndHash(normalizedEmail);
}

/// <summary>
/// Normalizes and hashes a string value.
/// </summary>
/// <param name="value">The value to normalize and hash.</param>
/// <returns>The normalized and hashed value.</returns>
private static string NormalizeAndHash(string value)
{
    return ToSha256String(digest, ToNormalizedValue(value));
}

/// <summary>
/// Hash a string value using SHA-256 hashing algorithm.
/// </summary>
/// <param name="digest">Provides the algorithm for SHA-256.</param>
/// <param name="value">The string value (e.g. an email address) to hash.</param>
/// <returns>The hashed value.</returns>
private static string ToSha256String(SHA256 digest, string value)
{
    byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value));
    // Convert the byte array into an unhyphenated hexadecimal string.
    return BitConverter.ToString(digestBytes).Replace("-", string.Empty);
}

/// <summary>
/// Removes leading and trailing whitespace and converts all characters to
/// lower case.
/// </summary>
/// <param name="value">The value to normalize.</param>
/// <returns>The normalized value.</returns>
private static string ToNormalizedValue(string value)
{
    return value.Trim().ToLower();
}
UploadEnhancedConversionsForLeads.cs

PHP

private static function normalizeAndHash(string $hashAlgorithm, string $value): string
{
    // Normalizes by first converting all characters to lowercase, then trimming spaces.
    $normalized = strtolower($value);
    // Removes leading, trailing, and intermediate spaces.
    $normalized = str_replace(' ', '', $normalized);
    return hash($hashAlgorithm, strtolower(trim($normalized)));
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google
 * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com".
 *
 * @param string $hashAlgorithm the hash algorithm to use
 * @param string $emailAddress the email address to normalize and hash
 * @return string the normalized and hashed email address
 */
private static function normalizeAndHashEmailAddress(
    string $hashAlgorithm,
    string $emailAddress
): string {
    $normalizedEmail = strtolower($emailAddress);
    $emailParts = explode("@", $normalizedEmail);
    if (
        count($emailParts) > 1
        && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1])
    ) {
        // Removes any '.' characters from the portion of the email address before the domain
        // if the domain is gmail.com or googlemail.com.
        $emailParts[0] = str_replace(".", "", $emailParts[0]);
        $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]);
    }
    return self::normalizeAndHash($hashAlgorithm, $normalizedEmail);
}
UploadEnhancedConversionsForLeads.php

Python

def normalize_and_hash_email_address(email_address):
    """Returns the result of normalizing and hashing an email address.

    For this use case, Google Ads requires removal of any '.' characters
    preceding "gmail.com" or "googlemail.com"

    Args:
        email_address: An email address to normalize.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-265 hashed string.
    """
    normalized_email = email_address.lower()
    email_parts = normalized_email.split("@")
    # Checks whether the domain of the email address is either "gmail.com"
    # or "googlemail.com". If this regex does not match then this statement
    # will evaluate to None.
    is_gmail = re.match(r"^(gmail|googlemail)\.com$", email_parts[1])

    # Check that there are at least two segments and the second segment
    # matches the above regex expression validating the email domain name.
    if len(email_parts) > 1 and is_gmail:
        # Removes any '.' characters from the portion of the email address
        # before the domain if the domain is gmail.com or googlemail.com.
        email_parts[0] = email_parts[0].replace(".", "")
        normalized_email = "@".join(email_parts)

    return normalize_and_hash(normalized_email)


def normalize_and_hash(s):
    """Normalizes and hashes a string with SHA-256.

    Private customer data must be hashed during upload, as described at:
    https://support.google.com/google-ads/answer/7474263

    Args:
        s: The string to perform this operation on.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-256 hashed string.
    """
    return hashlib.sha256(s.strip().lower().encode()).hexdigest()
upload_enhanced_conversions_for_leads.py

Ruby

# Returns the result of normalizing and then hashing the string using the
# provided digest.  Private customer data must be hashed during upload, as
# described at https://support.google.com/google-ads/answer/7474263.
def normalize_and_hash(str)
  # Remove leading and trailing whitespace and ensure all letters are lowercase
  # before hasing.
  Digest::SHA256.hexdigest(str.strip.downcase)
end

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
def normalize_and_hash_email(email)
  email_parts = email.downcase.split("@")
  # Removes any '.' characters from the portion of the email address before the
  # domain if the domain is gmail.com or googlemail.com.
  if email_parts.last =~ /^(gmail|googlemail)\.com\s*/
    email_parts[0] = email_parts[0].gsub('.', '')
  end
  normalize_and_hash(email_parts.join('@'))
end
upload_enhanced_conversions_for_leads.rb

Perl

sub normalize_and_hash {
  my $value = shift;

  # Removes leading, trailing, and intermediate spaces.
  $value =~ s/\s+//g;
  return sha256_hex(lc $value);
}

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
sub normalize_and_hash_email_address {
  my $email_address = shift;

  my $normalized_email = lc $email_address;
  my @email_parts      = split('@', $normalized_email);
  if (scalar @email_parts > 1
    && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/)
  {
    # Remove any '.' characters from the portion of the email address before the
    # domain if the domain is 'gmail.com' or 'googlemail.com'.
    $email_parts[0] =~ s/\.//g;
    $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1];
  }
  return normalize_and_hash($normalized_email);
}
upload_enhanced_conversions_for_leads.pl

Gelişmiş dönüşümleri yükleme

Aşağıdaki snippet'ler standartlaştırmayla, e-posta adresi ve telefon numarası tanımlayıcıları içerir ve karma oluşturma işlemi gerektiği şekilde uygulanır. En iyi uygulama olarak gclid ve Varsa dönüşümde order_id.

ClickConversion'a kullanıcı tanımlayıcıları ekleme

Java

// Creates an empty builder for constructing the click conversion.
ClickConversion.Builder clickConversionBuilder = ClickConversion.newBuilder();

// Extracts user email and phone from the raw data, normalizes and hashes it, then wraps it in
// UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but
// in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
// hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
// than one of these attributes on the same UserIdentifier will clear all the other members
// of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// UserIdentifier incorrectlyPopulatedUserIdentifier =
//     UserIdentifier.newBuilder()
//         .setHashedEmail("...")
//         .setHashedPhoneNumber("...")
//         .build();

Map<String, String> rawRecord =
    ImmutableMap.<String, String>builder()
        // Email address that includes a period (.) before the Gmail domain.
        .put("email", "alex.2@example.com")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        // This example lets you input conversion details as arguments, but in reality you might
        // store this data alongside other user data, so we include it in this sample user
        // record.
        .put("orderId", orderId)
        .put("gclid", gclid)
        .put("conversionActionId", Long.toString(conversionActionId))
        .put("conversionDateTime", conversionDateTime)
        .put("conversionValue", Double.toString(conversionValue))
        .put("currencyCode", "USD")
        .put("adUserDataConsent", adUserDataConsent == null ? null : adUserDataConsent.name())
        .build();

// Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256");

// Creates a list for the user identifiers.
List<UserIdentifier> userIdentifiers = new ArrayList<>();

// Creates a user identifier using the hashed email address, using the normalize and hash method
// specifically for email addresses.
UserIdentifier emailIdentifier =
    UserIdentifier.newBuilder()
        // Optional: specify the user identifier source.
        .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY)
        // Uses the normalize and hash method specifically for email addresses.
        .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email")))
        .build();
userIdentifiers.add(emailIdentifier);

// Creates a user identifier using normalized and hashed phone info.
UserIdentifier hashedPhoneNumberIdentifier =
    UserIdentifier.newBuilder()
        .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone")))
        .build();
// Adds the hashed phone number identifier to the UserData object's list.
userIdentifiers.add(hashedPhoneNumberIdentifier);

// Adds the user identifiers to the conversion.
clickConversionBuilder.addAllUserIdentifiers(userIdentifiers);
UploadEnhancedConversionsForLeads.java

C#

// Adds a user identifier using the hashed email address, using the normalize
// and hash method specifically for email addresses.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedEmail = NormalizeAndHashEmailAddress("alex.2@example.com"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier using normalized and hashed phone info.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedPhoneNumber = NormalizeAndHash("+1 800 5550102"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier with all the required mailing address elements.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    AddressInfo = new OfflineUserAddressInfo()
    {
        // FirstName and LastName must be normalized and hashed.
        HashedFirstName = NormalizeAndHash("Alex"),
        HashedLastName = NormalizeAndHash("Quinn"),
        // CountryCode and PostalCode are sent in plain text.
        CountryCode = "US",
        PostalCode = "94045"
    }
});
UploadEnhancedConversionsForLeads.cs

PHP

// Creates a click conversion with the specified attributes.
$clickConversion = new ClickConversion();

// Extract user email and phone from the raw data, normalize and hash it, then wrap it in
// UserIdentifier objects. Creates a separate UserIdentifier object for each.
// The data in this example is hardcoded, but in your application you might read the raw
// data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE
// of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting
// more than one of these attributes on the same UserIdentifier will clear all the other
// members of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// $incorrectlyPopulatedUserIdentifier = new UserIdentifier([
//    'hashed_email' => '...',
//    'hashed_phone_number' => '...'
// ]);

$rawRecord = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
    // This example lets you input conversion details as arguments, but in reality you might
    // store this data alongside other user data, so we include it in this sample user
    // record.
    'orderId' => $orderId,
    'gclid' => $gclid,
    'conversionActionId' => $conversionActionId,
    'conversionDateTime' => $conversionDateTime,
    'conversionValue' => $conversionValue,
    'currencyCode' => 'USD',
    'adUserDataConsent' => $adUserDataConsent
];

// Creates a list for the user identifiers.
$userIdentifiers = [];

// Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
$hashAlgorithm = "sha256";

// Creates a user identifier using the hashed email address, using the normalize and hash
// method specifically for email addresses.
$emailIdentifier = new UserIdentifier([
    // Uses the normalize and hash method specifically for email addresses.
    'hashed_email' => self::normalizeAndHashEmailAddress(
        $hashAlgorithm,
        $rawRecord['email']
    ),
    // Optional: Specifies the user identifier source.
    'user_identifier_source' => UserIdentifierSource::FIRST_PARTY
]);
$userIdentifiers[] = $emailIdentifier;

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (array_key_exists('phone', $rawRecord)) {
    $hashedPhoneNumberIdentifier = new UserIdentifier([
        'hashed_phone_number' => self::normalizeAndHash(
            $hashAlgorithm,
            $rawRecord['phone'],
            true
        )
    ]);
    // Adds the hashed email identifier to the user identifiers list.
    $userIdentifiers[] = $hashedPhoneNumberIdentifier;
}

// Adds the user identifiers to the conversion.
$clickConversion->setUserIdentifiers($userIdentifiers);
UploadEnhancedConversionsForLeads.php

Python

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier = client.get_type("UserIdentifier")
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email": "alex.2@example.com",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone": "+1 800 5550102",
    # This example lets you input conversion details as arguments,
    # but in reality you might store this data alongside other user data,
    # so we include it in this sample user record.
    "order_id": order_id,
    "gclid": gclid,
    "conversion_action_id": conversion_action_id,
    "conversion_date_time": conversion_date_time,
    "conversion_value": conversion_value,
    "currency_code": "USD",
    "ad_user_data_consent": ad_user_data_consent,
}

# Constructs the click conversion.
click_conversion = client.get_type("ClickConversion")
# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
email_identifier = client.get_type("UserIdentifier")
# Optional: Specifies the user identifier source.
email_identifier.user_identifier_source = (
    client.enums.UserIdentifierSourceEnum.FIRST_PARTY
)
# Uses the normalize and hash method specifically for email addresses.
email_identifier.hashed_phone_number = normalize_and_hash_email_address(
    raw_record["email"]
)
# Adds the user identifier to the conversion.
click_conversion.user_identifiers.append(email_identifier)

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
if raw_record.get("phone") is not None:
    phone_identifier = client.get_type("UserIdentifier")
    phone_identifier.hashed_phone_number = normalize_and_hash(
        raw_record["phone"]
    )
    # Adds the phone identifier to the conversion adjustment.
    click_conversion.user_identifiers.append(phone_identifier)
upload_enhanced_conversions_for_leads.py

Ruby

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  "email" => "alex.2@example.com",
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  "phone" => "+1 800 5550102",
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  "order_id" => order_id,
  "gclid" => gclid,
  "conversion_action_id" => conversion_action_id,
  "conversion_date_time" => conversion_date_time,
  "conversion_value" => conversion_value,
  "currency_code" => "USD",
  "ad_user_data_consent" => ad_user_data_consent,
}

click_conversion = client.resource.click_conversion do |cc|
  cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
  cc.conversion_date_time = conversion_date_time
  cc.conversion_value = conversion_value.to_f
  cc.currency_code = 'USD'

  unless order_id.nil?
    cc.order_id = order_id
  end

  unless raw_record["gclid"].nil?
    cc.gclid = gclid
  end

  # Specifies whether user consent was obtained for the data you are
  # uploading. For more details, see:
  # https://www.google.com/about/company/user-consent-policy
  unless raw_record["ad_user_data_consent"].nil?
    cc.consent = client.resource.consent do |c|
      c.ad_user_data = ad_user_data_consent
    end
  end

  # Creates a user identifier using the hashed email address, using the
  # normalize and hash method specifically for email addresses.
  # If using a phone number, use the normalize_and_hash method instead.
  cc.user_identifiers << client.resource.user_identifier do |ui|
    ui.hashed_phone_number = normalize_and_hash_email(raw_record["email"])
    # Optional: Specifies the user identifier source.
    ui.user_identifier_source = :FIRST_PARTY
  end

  # Checks if the record has a phone number, and if so, adds a UserIdentifier
  # for it.
  unless raw_record["phone"].nil?
    cc.user_identifiers << client.resource.user_identifier do |ui|
      ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
    end
  end
end
upload_enhanced_conversions_for_leads.rb

Perl

# Create an empty click conversion.
my $click_conversion =
  Google::Ads::GoogleAds::V17::Services::ConversionUploadService::ClickConversion
  ->new({});

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each.
# The data in this example is hardcoded, but in your application
# you might read the raw data from an input file.
#
# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
# only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
# or address-info. Setting more than one of these attributes on the same UserIdentifier
# will clear all the other members of the oneof. For example, the following code is
# INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
#
# my $incorrect_user_identifier = Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
#   hashedEmail => '...',
#   hashedPhoneNumber => '...',
# });
my $raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  email => 'alex.2@example.com',
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  phone => '+1 800 5550102',
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  orderId            => $order_id,
  gclid              => $gclid,
  conversionActionId => $conversion_action_id,
  conversionDateTime => $conversion_date_time,
  conversionValue    => $conversion_value,
  currencyCode       => "USD",
  adUserDataConsent  => $ad_user_data_consent
};
my $user_identifiers = [];

# Create a user identifier using the hashed email address, using the normalize
# and hash method specifically for email addresses.
my $hashed_email = normalize_and_hash_email_address($raw_record->{email});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
      hashedEmail => $hashed_email,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Create a user identifier using normalized and hashed phone info.
my $hashed_phone = normalize_and_hash($raw_record->{phone});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
      hashedPhone => $hashed_phone,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Add the user identifiers to the conversion.
$click_conversion->{userIdentifiers} = $user_identifiers;
upload_enhanced_conversions_for_leads.pl

ClickConversion'a dönüşüm ayrıntıları ekleme

Java

// Adds details of the conversion.
clickConversionBuilder.setConversionAction(
    ResourceNames.conversionAction(
        customerId, Long.parseLong(rawRecord.get("conversionActionId"))));
clickConversionBuilder.setConversionDateTime(rawRecord.get("conversionDateTime"));
clickConversionBuilder.setConversionValue(Double.parseDouble(rawRecord.get("conversionValue")));
clickConversionBuilder.setCurrencyCode(rawRecord.get("currencyCode"));

// Sets the order ID if provided.
if (rawRecord.get("orderId") != null) {
  clickConversionBuilder.setOrderId(rawRecord.get("orderId"));
}

// Sets the Google click ID (gclid) if provided.
if (rawRecord.get("gclid") != null) {
  clickConversionBuilder.setGclid(rawRecord.get("gclid"));
}

// Sets the consent information, if provided.
if (rawRecord.get("adUserDataConsent") != null) {
  // Specifies whether user consent was obtained for the data you are uploading. See
  // https://www.google.com/about/company/user-consent-policy for details.
  clickConversionBuilder.setConsent(
      Consent.newBuilder()
          .setAdUserData(ConsentStatus.valueOf(rawRecord.get("adUserDataConsent"))));
}

// Calls build to build the conversion.
ClickConversion clickConversion = clickConversionBuilder.build();
UploadEnhancedConversionsForLeads.java

C#

// Adds details of the conversion.
clickConversion.ConversionAction =
    ResourceNames.ConversionAction(customerId, conversionActionId);
clickConversion.ConversionDateTime = conversionDateTime;
clickConversion.ConversionValue = conversionValue;
clickConversion.CurrencyCode = "USD";

// Sets the order ID if provided.
if (!string.IsNullOrEmpty(orderId))
{
    clickConversion.OrderId = orderId;
}

// Sets the Google click ID (gclid) if provided.
if (!string.IsNullOrEmpty(gclid))
{
    clickConversion.Gclid = gclid;
}

UploadEnhancedConversionsForLeads.cs

PHP

// Adds details of the conversion.
$clickConversion->setConversionAction(
    ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId'])
);
$clickConversion->setConversionDateTime($rawRecord['conversionDateTime']);
$clickConversion->setConversionValue($rawRecord['conversionValue']);
$clickConversion->setCurrencyCode($rawRecord['currencyCode']);

// Sets the order ID if provided.
if (!empty($rawRecord['orderId'])) {
    $clickConversion->setOrderId($rawRecord['orderId']);
}

// Sets the Google click ID (gclid) if provided.
if (!empty($rawRecord['gclid'])) {
    $clickConversion->setGclid($rawRecord['gclid']);
}

// Sets the ad user data consent if provided.
if (!empty($rawRecord['adUserDataConsent'])) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    $clickConversion->setConsent(
        new Consent(['ad_user_data' => $rawRecord['adUserDataConsent']])
    );
}
UploadEnhancedConversionsForLeads.php

Python

# Add details of the conversion.
# Gets the conversion action resource name.
conversion_action_service = client.get_service("ConversionActionService")
click_conversion.conversion_action = (
    conversion_action_service.conversion_action_path(
        customer_id, raw_record["conversion_action_id"]
    )
)
click_conversion.conversion_date_time = raw_record["conversion_date_time"]
click_conversion.conversion_value = raw_record["conversion_value"]
click_conversion.currency_code = raw_record["currency_code"]

# Sets the order ID if provided.
if raw_record.get("order_id"):
    click_conversion.order_id = raw_record["order_id"]

# Sets the gclid if provided.
if raw_record.get("gclid"):
    click_conversion.gclid = raw_record["gclid"]

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
if raw_record["ad_user_data_consent"]:
    click_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
        raw_record["ad_user_data_consent"]
    ]
upload_enhanced_conversions_for_leads.py

Ruby

cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
cc.conversion_date_time = conversion_date_time
cc.conversion_value = conversion_value.to_f
cc.currency_code = 'USD'

unless order_id.nil?
  cc.order_id = order_id
end

unless raw_record["gclid"].nil?
  cc.gclid = gclid
end

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
unless raw_record["ad_user_data_consent"].nil?
  cc.consent = client.resource.consent do |c|
    c.ad_user_data = ad_user_data_consent
  end
end
upload_enhanced_conversions_for_leads.rb

Perl

# Add details of the conversion.
$click_conversion->{conversionAction} =
  Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action(
  $customer_id, $raw_record->{conversionActionId});
$click_conversion->{conversionDateTime} = $raw_record->{conversionDateTime};
$click_conversion->{conversionValue}    = $raw_record->{conversionValue};
$click_conversion->{currencyCode}       = $raw_record->{currencyCode};

# Set the order ID if provided.
if (defined $raw_record->{orderId}) {
  $click_conversion->{orderId} = $raw_record->{orderId};
}

# Set the Google click ID (gclid) if provided.
if (defined $raw_record->{gclid}) {
  $click_conversion->{gclid} = $raw_record->{gclid};
}

# Set the consent information, if provided.
if (defined $raw_record->{adUserDataConsent}) {
  $click_conversion->{consent} =
    Google::Ads::GoogleAds::V17::Common::Consent->new({
      adUserData => $raw_record->{adUserDataConsent}});
}
upload_enhanced_conversions_for_leads.pl

ClickConversion'ı yükleyin

Java

// Creates the conversion upload service client.
try (ConversionUploadServiceClient conversionUploadServiceClient =
    googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
  // Uploads the click conversion. Partial failure should always be set to true.

  // NOTE: This request contains a single conversion as a demonstration.  However, if you have
  // multiple conversions to upload, it's best to upload multiple conversions per request
  // instead of sending a separate request per conversion. See the following for per-request
  // limits:
  // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  UploadClickConversionsResponse response =
      conversionUploadServiceClient.uploadClickConversions(
          UploadClickConversionsRequest.newBuilder()
              .setCustomerId(Long.toString(customerId))
              .addConversions(clickConversion)
              // Enables partial failure (must be true).
              .setPartialFailure(true)
              .build());
UploadEnhancedConversionsForLeads.java

C#

// Uploads the click conversion. Partial failure should always be set to true.
// NOTE: This request contains a single conversion as a demonstration.
// However, if you have multiple conversions to upload, it's best to upload multiple
// conversions per request instead of sending a separate request per conversion.
// See the following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload
UploadClickConversionsResponse response =
    conversionUploadService.UploadClickConversions(
        new UploadClickConversionsRequest()
        {
            CustomerId = customerId.ToString(),
            Conversions = { clickConversion },
            // Enables partial failure (must be true).
            PartialFailure = true
        });

UploadEnhancedConversionsForLeads.cs

PHP

// Issues a request to upload the click conversion.
$conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
// NOTE: This request contains a single conversion as a demonstration.  However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
$response = $conversionUploadServiceClient->uploadClickConversions(
    // Enables partial failure (must be true).
    UploadClickConversionsRequest::build($customerId, [$clickConversion], true)
);
UploadEnhancedConversionsForLeads.php

Python

# Creates the conversion upload service client.
conversion_upload_service = client.get_service("ConversionUploadService")
# Uploads the click conversion. Partial failure should always be set to
# True.
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
response = conversion_upload_service.upload_click_conversions(
    customer_id=customer_id,
    conversions=[click_conversion],
    # Enables partial failure (must be true).
    partial_failure=True,
)
upload_enhanced_conversions_for_leads.py

Ruby

response = client.service.conversion_upload.upload_click_conversions(
  customer_id: customer_id,
  conversions: [click_conversion],
  # Partial failure must be true.
  partial_failure: true,
)

if response.partial_failure_error
  puts "Partial failure encountered: #{response.partial_failure_error.message}"
else
  result = response.results.first
  puts "Uploaded click conversion that happened at #{result.conversion_date_time} " \
    "to #{result.conversion_action}."
end
upload_enhanced_conversions_for_leads.rb

Perl

# Upload the click conversion. Partial failure should always be set to true.
#
# NOTE: This request contains a single conversion as a demonstration.
# However, if you have multiple conversions to upload, it's best to
# upload multiple conversions per request instead of sending a separate
# request per conversion. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
my $response =
  $api_client->ConversionUploadService()->upload_click_conversions({
    customerId  => $customer_id,
    conversions => [$click_conversion],
    # Enable partial failure (must be true).
    partialFailure => "true"
  });
upload_enhanced_conversions_for_leads.pl

Yüklemelerinizi inceleyin

İncelemek için çevrimdışı veri teşhisini kullanma son yüklemelerinizin genel sağlığı. Yükleme başarılı olursa her zaman yüklemelerin eşleşmeleri olduğu anlamına gelir.

Kampanyalarınız için dönüşüm metrikleri hakkında rapor oluştururken Kullanıcı eşleme Google Ads kullanıcı arayüzünü ilişkilendirmek için arayüz metriklerini metriklerini Google Ads API raporlama alanlarıyla birlikte görüntüleyebilirsiniz. Ayrıca, Toplamı görüntülemek için conversion_action kaynak belirli bir dönüşümün dönüşüm sayısı ve toplam dönüşüm değeri eyleme dökülebilir.

Sonraki adımlar

Dönüşümlerinizi ayarlamanız gerekiyorsa Dönüşüm Yükleme Düzenlemeler rehberini inceleyin.

Potansiyel müşteriler için gelişmiş dönüşümler entegrasyonunuzla ilgili sorunları giderme konusunda yardım almak isterseniz şuraya devam edin: Sorun giderme rehberini inceleyin.

Önceki
Kurulum
Sonraki
Sorun giderme