고객 일치 타겟팅 시작하기

고객 일치 타겟팅을 사용하면 온라인 및 오프라인 데이터를 사용하여 광고를 게재하고 재참여를 유도할 수 있습니다. Google 검색, 쇼핑 탭, Gmail, YouTube, 디스플레이. 고객은 해당 고객 및 이와 유사한 다른 고객을 대상으로 광고를 타겟팅합니다. 다음과 같은 작업을 할 수 있습니다. 고객 관계 관리 (CRM) 데이터 일괄 업로드, 추가 또는 삭제 이 사용자 목록을 이용해 logical_user_list

잠재고객 관리 보기 개요 고객 일치 타겟팅과 비교할 다양한 잠재고객 세그먼트 유형 목록 기타 사용자 목록 옵션을 확인할 수 있습니다.

고객에 대해 자세히 알아보기 일치 및 잠재고객 타겟팅을 사용합니다.

기본 요건

모든 계정에서 고객 일치 타겟팅을 사용할 수 있는 것은 아닙니다. 고객 일치 타겟팅을 사용하려면 계정에 다음이 있어야 합니다.

  • 양호한 정책 준수 내역
  • 양호한 결제 내역

계정이 충족하는 요구사항에 따라 사용할 수 있는 기능 있습니다. 고객 일치 타겟팅 참조 자격 요건 정책 요구사항을 준수해야 합니다

통합 설계

사용 흐름

다음은 고객 목록을 만들고 타겟팅할 때 권장되는 흐름입니다.

  1. 빈 고객 목록을 만듭니다.

  2. OfflineUserDataJob를 만듭니다. 그것은 여러 개의 작업보다 하나의 대규모 작업을 만드는 것이 더 작은 일자리를 찾고 있습니다.

    Google Ads API v15 버전부터 consent 필드 /customer_match_user_list_metadata OfflineUserDataJob에서 create 요청입니다. remove 요청의 경우 동의가 필요하지 않습니다. API 반품 OfflineUserDataJobError.CUSTOMER_NOT_ACCEPTED_CUSTOMER_DATA_TERMS 드림 작업의 consent.ad_user_data 또는 consent.ad_personalization가 설정된 경우 DENIED에게 전송합니다.

    사용자가 동의를 거부한 경우 remove 작업을 사용하여 사용자 목록에서 사용자의 식별자를 삭제합니다.

    특정 사용자에 대한 동의가 누락된 경우 작업의 consent 필드를 설정하지 않은 경우 customer_match_user_list_metadata 그런 다음 해당 사용자에 대한 식별자를 추가합니다. 해당 별도의 작업에 create 작업을 사용합니다.

  3. 다음을 사용하여 연산을 추가합니다. OfflineUserDataJobService.AddOfflineUserDataJobOperations 드림 메서드를 사용하여 축소하도록 요청합니다. 호출 한 번으로 최대 10,000개의 식별자를 추가하는 것이 좋습니다. 최적의 처리를 위해 맞춤설정할 수 있습니다 단일 AddOfflineUserDataJobOperations 요청 최대 100,000개의 식별자를 포함할 수 있으며, 작업 목록의 UserData 객체

    예를 들어 각 UserData 객체에 대해 하나의 UserIdentifier이 있으면 hashed_phone_number 동안 hashed_email 및 1회 추가 UserIdentifier, 이후 각 요청은 요청당 5,000개의 UserData 객체를 전송하는 것이 가장 좋습니다. 총 10,000개의 사용자 식별자가 포함됩니다.

  4. 모든 작업이 추가되거나 작업이 자동으로 확장 및 축소할 수 있습니다 다음에 추가할 수 있는 작업 수에는 제한이 없습니다. 단일 작업 작업당 작업 수는 1,000,000개를 넘지 않는 것이 좋습니다. 최적의 처리를 위해 맞춤설정할 수 있습니다

  5. 작업을 실행합니다.

  6. 업로드 성공 설문조사

  7. 일치율을 확인합니다.

  8. 목록을 타겟팅합니다.

오프라인 사용자 데이터 작업 서비스 및 사용자 데이터 서비스

고객 일치 타겟팅 데이터를 업로드하는 데는 두 가지 서비스를 사용할 수 있습니다. 그런 다음 서비스에 제한사항이 있을 수 있으므로 사용 사례에 맞게 설정하세요

고객 일치 타겟팅 업로드 서비스
OfflineUserDataJobService (권장) 대부분의 개발자는 이 서비스를 사용합니다. 고화질 동영상을 위한 대용량 업로드에 완료 시 성공 측정항목을 반환합니다. 이 가이드 이 서비스에 중점을 둡니다
UserDataService 이 서비스는 한 번에 소수의 식별자를 업로드하도록 최적화되어 있습니다. 수시로 업데이트되며 지속적으로 실행하도록 최적화되지 않았습니다. 제한이 있음 최대 10개 연산이 실행될 수 있습니다 또한 단일 요청에 전체 총 100개 이상 user_identifiers

업로드 관련 안내 자세한 내용은 가이드 고객 일치 타겟팅 통합 관리

v15 버전부터 Google Ads API를 이용하는 경우 consent 드림 필드 customer_match_user_list_metadata 내 UploadUserDataRequest create 요청입니다. remove 요청의 경우 동의가 필요하지 않습니다. API는 received_operations_count 드림 0으로 설정되어 있으면 consent.ad_user_data 또는 consent.ad_personalization DENIED입니다. 식별자가 DENIED 동의를 얻은 경우 그러면 UploadUserDataRequest의 remove 연산입니다.

권장사항

고객 일치 타겟팅을 설계할 때 다음 권장사항에 유의하세요 통합:

  • 단일 사용자 목록을 수정하기 위해 여러 계정을 사용하지 않습니다. 사용자 목록은 Google Ads 또는 데이터만 수정할 수 있습니다. 파트너 계정에 만들 수 없습니다.

  • 다음 초당 작업 수를 최대화합니다. AddOfflineUserDataJobOperationsRequest, 식별자 최대 100,000개, 제외 RESOURCE_EXHAUSTED 오류가 발생했습니다.

  • create와 remove 연산을 섞어서 사용하지 마세요. OfflineUserDataJob 이렇게 하면 다음과 같은 결과가 발생합니다. CONFLICTING_OPERATION 드림 오류가 발생했습니다.

  • 다음에서 partial_failure 사용 설정 AddOfflineUserDataJobOperationsRequest 작업을 실행하기 전에 문제가 있는 작업을 탐지합니다. 작업은 OfflineUserDataJob

  • 여러 애플리케이션을 동시에 실행하지 않기 OfflineUserDataJob는 동일한 사용자 목록 (즉, 동일한 사용자 목록을 CustomerMatchUserListMetadata.user_list 가 동일한 리소스 이름을 가리킴). 이렇게 하면 CONCURRENT_MODIFICATION 드림 오류가 발생했습니다. 할 수 있습니다. 이 오류는 동일한 클라이언트 ID를 받기 위해 Google Ads UI 및 Google Ads API를 통해 목록 수정 이 작업은 추가에 적용 작업을 PENDING 작업을 할 수 있습니다. 이 작업은 작업이 시작되기 전에 언제든지 수행할 수 있습니다.

  • 적용할 연산이 수천 개라면 하나를 만듭니다. 모든 작업을 포함하는 OfflineUserDataJob입니다. 여러 개의 테스트 계정을 만들지 마세요. 작업을 하나씩 실행하고 순차적으로 실행하거나 동시에 사용할 수 있습니다. 모든 작업이 포함된 대규모 단일 작업에는 거리가 멀었습니다. 여러 개의 소규모 작업보다 효율성이 높고 워크플로에서 오류 발생을 제어할 수 있습니다

고객 목록을 활용하여 타겟팅을 최적화하는 방법에 대한 아이디어를 얻으려면 다음 페이지를 방문하세요. 고객센터를 참조하세요.

고객 목록 만들기

먼저, UserListService 고객 목록이 생성됨 포드의 상태를 crm_based_user_list 필드 user_list 객체. crm_based_user_list 필드는 캠페인 유형에 설정할 수 있습니다. 다음과 같습니다.

여러 캠페인 유형의 고객 일치 타겟팅
검색 네트워크 광고가 검색 네트워크에 게재됩니다.
디스플레이 네트워크 디스플레이 네트워크 및 Gmail에 GSP가 있는 경우에만 광고가 게재됩니다. 있습니다.
디스플레이 네트워크 추가 (검색 캠페인) 검색 네트워크와 Gmail에 GSP가 있는 경우에만 광고가 게재됩니다. 있습니다.
동영상 캠페인 인스트림 TrueView 광고가 있는 경우에만 YouTube에 광고가 표시됩니다.
쇼핑 캠페인 쇼핑 탭에 광고가 표시됩니다.

crm_based_user_list에는 다음 세 가지 필드가 있습니다.

  • app_id: 데이터가 수집되었습니다. 이는 다음에 대한 CrmBasedUserList 생성 시 필요합니다. 모바일 광고 ID 업로드

  • upload_key_type: 목록의 일치하는 키 유형(CONTACT_INFO, CRM_ID 또는 MOBILE_ADVERTISING_ID 동일한 목록에서는 혼합된 데이터 유형을 사용할 수 없습니다. 이 필드는 모든 고객 목록에 필수입니다.

  • data_source_type: 목록의 데이터 소스입니다. 기본값은 FIRST_PARTY입니다. 허용 목록에 추가 고객은 서드 파티에서 소싱하는 고객 목록을 만들 수 있습니다.

membership_life_span 속성을 사용하면 사용자가 목록에 있는 것으로 간주됩니다. 고객 목록 유형을 사용하면 membership_life_span~10,000 사이의 값은 만료가 없음을 나타냅니다.

membership_status 속성 는 목록이 신규 사용자를 수락하는지 여부를 정의합니다.

고객 목록을 만드는 코드 예

자바

private String createCustomerMatchUserList(GoogleAdsClient googleAdsClient, long customerId) {
  // Creates the new user list.
  UserList userList =
      UserList.newBuilder()
          .setName("Customer Match list #" + getPrintableDateTime())
          .setDescription("A list of customers that originated from email addresses")
          // Customer Match user lists can use a membership life span of 10,000 to indicate
          // unlimited; otherwise normal values apply.
          // Sets the membership life span to 30 days.
          .setMembershipLifeSpan(30)
          // Sets the upload key type to indicate the type of identifier that will be used to
          // add users to the list. This field is immutable and required for a CREATE operation.
          .setCrmBasedUserList(
              CrmBasedUserListInfo.newBuilder()
                  .setUploadKeyType(CustomerMatchUploadKeyType.CONTACT_INFO))
          .build();

  // Creates the operation.
  UserListOperation operation = UserListOperation.newBuilder().setCreate(userList).build();

  // Creates the service client.
  try (UserListServiceClient userListServiceClient =
      googleAdsClient.getLatestVersion().createUserListServiceClient()) {
    // Adds the user list.
    MutateUserListsResponse response =
        userListServiceClient.mutateUserLists(
            Long.toString(customerId), ImmutableList.of(operation));
    // Prints the response.
    System.out.printf(
        "Created Customer Match user list with resource name: %s.%n",
        response.getResults(0).getResourceName());
    return response.getResults(0).getResourceName();
  }
}

AddCustomerMatchUserList.java

C#

private string CreateCustomerMatchUserList(GoogleAdsClient client, long customerId)
{
    // Get the UserListService.
    UserListServiceClient service = client.GetService(Services.V17.UserListService);

    // Creates the user list.
    UserList userList = new UserList()
    {
        Name = $"Customer Match list# {ExampleUtilities.GetShortRandomString()}",
        Description = "A list of customers that originated from email and physical" +
            " addresses",
        // Customer Match user lists can use a membership life span of 10000 to
        // indicate unlimited; otherwise normal values apply.
        // Sets the membership life span to 30 days.
        MembershipLifeSpan = 30,
        CrmBasedUserList = new CrmBasedUserListInfo()
        {
            UploadKeyType = CustomerMatchUploadKeyType.ContactInfo
        }
    };
    // Creates the user list operation.
    UserListOperation operation = new UserListOperation()
    {
        Create = userList
    };

    // Issues a mutate request to add the user list and prints some information.
    MutateUserListsResponse response = service.MutateUserLists(
        customerId.ToString(), new[] { operation });
    string userListResourceName = response.Results[0].ResourceName;
    Console.WriteLine($"User list with resource name '{userListResourceName}' " +
        $"was created.");
    return userListResourceName;
}
AddCustomerMatchUserList.cs

PHP

private static function createCustomerMatchUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId
): string {
    // Creates the user list.
    $userList = new UserList([
        'name' => 'Customer Match list #' . Helper::getPrintableDatetime(),
        'description' => 'A list of customers that originated from email '
            . 'and physical addresses',
        // Customer Match user lists can use a membership life span of 10000 to
        // indicate unlimited; otherwise normal values apply.
        // Sets the membership life span to 30 days.
        'membership_life_span' => 30,
        'crm_based_user_list' => new CrmBasedUserListInfo([
            // Sets the upload key type to indicate the type of identifier that will be used to
            // add users to the list. This field is immutable and required for a CREATE
            // operation.
            'upload_key_type' => CustomerMatchUploadKeyType::CONTACT_INFO
        ])
    ]);

    // Creates the user list operation.
    $operation = new UserListOperation();
    $operation->setCreate($userList);

    // Issues a mutate request to add the user list and prints some information.
    $userListServiceClient = $googleAdsClient->getUserListServiceClient();
    $response = $userListServiceClient->mutateUserLists(
        MutateUserListsRequest::build($customerId, [$operation])
    );
    $userListResourceName = $response->getResults()[0]->getResourceName();
    printf("User list with resource name '%s' was created.%s", $userListResourceName, PHP_EOL);

    return $userListResourceName;
}
AddCustomerMatchUserList.php

Python

def create_customer_match_user_list(client, customer_id):
    """Creates a Customer Match user list.

    Args:
        client: The Google Ads client.
        customer_id: The ID for the customer that owns the user list.

    Returns:
        The string resource name of the newly created user list.
    """
    # Creates the UserListService client.
    user_list_service_client = client.get_service("UserListService")

    # Creates the user list operation.
    user_list_operation = client.get_type("UserListOperation")

    # Creates the new user list.
    user_list = user_list_operation.create
    user_list.name = f"Customer Match list #{uuid.uuid4()}"
    user_list.description = (
        "A list of customers that originated from email and physical addresses"
    )
    # Sets the upload key type to indicate the type of identifier that is used
    # to add users to the list. This field is immutable and required for a
    # CREATE operation.
    user_list.crm_based_user_list.upload_key_type = (
        client.enums.CustomerMatchUploadKeyTypeEnum.CONTACT_INFO
    )
    # Customer Match user lists can set an unlimited membership life span;
    # to do so, use the special life span value 10000. Otherwise, membership
    # life span must be between 0 and 540 days inclusive. See:
    # https://developers.devsite.corp.google.com/google-ads/api/reference/rpc/latest/UserList#membership_life_span
    # Sets the membership life span to 30 days.
    user_list.membership_life_span = 30

    response = user_list_service_client.mutate_user_lists(
        customer_id=customer_id, operations=[user_list_operation]
    )
    user_list_resource_name = response.results[0].resource_name
    print(
        f"User list with resource name '{user_list_resource_name}' was created."
    )

    return user_list_resource_name
add_customer_match_user_list.py

Ruby

def create_customer_match_user_list(client, customer_id)
  # Creates the user list.
  operation = client.operation.create_resource.user_list do |ul|
    ul.name = "Customer Match List #{(Time.new.to_f * 1000).to_i}"
    ul.description = "A list of customers that originated from email and " \
      "physical addresses"
    # Customer Match user lists can use a membership life span of 10000 to
    # indicate unlimited; otherwise normal values apply.
    # Sets the membership life span to 30 days.
    ul.membership_life_span = 30
    ul.crm_based_user_list = client.resource.crm_based_user_list_info do |crm|
      crm.upload_key_type = :CONTACT_INFO
    end
  end

  # Issues a mutate request to add the user list and prints some information.
  response = client.service.user_list.mutate_user_lists(
    customer_id: customer_id,
    operations: [operation],
  )

  # Prints out some information about the newly created user list.
  resource_name = response.results.first.resource_name
  puts "User list with resource name #{resource_name} was created."

  resource_name
end
add_customer_match_user_list.rb

Perl

sub create_customer_match_user_list {
  my ($api_client, $customer_id) = @_;

  # Create the user list.
  my $user_list = Google::Ads::GoogleAds::V17::Resources::UserList->new({
      name        => "Customer Match list #" . uniqid(),
      description =>
        "A list of customers that originated from email and physical addresses",
      # Customer Match user lists can use a membership life span of 10000 to
      # indicate unlimited; otherwise normal values apply.
      # Set the membership life span to 30 days.
      membershipLifeSpan => 30,
      # Set the upload key type to indicate the type of identifier that will be
      # used to add users to the list. This field is immutable and required for
      # a CREATE operation.
      crmBasedUserList =>
        Google::Ads::GoogleAds::V17::Common::CrmBasedUserListInfo->new({
          uploadKeyType => CONTACT_INFO
        })});

  # Create the user list operation.
  my $user_list_operation =
    Google::Ads::GoogleAds::V17::Services::UserListService::UserListOperation->
    new({
      create => $user_list
    });

  # Issue a mutate request to add the user list and print some information.
  my $user_lists_response = $api_client->UserListService()->mutate({
      customerId => $customer_id,
      operations => [$user_list_operation]});
  my $user_list_resource_name =
    $user_lists_response->{results}[0]{resourceName};
  printf "User list with resource name '%s' was created.\n",
    $user_list_resource_name;

  return $user_list_resource_name;
}
add_customer_match_user_list.pl

고객 데이터 추가

3가지 기본 일치 키는 이메일 주소, 우편 주소, 전화번호입니다. 있습니다. 사용자 ID와 휴대기기 ID를 일치 키로 사용할 수 있지만 쿠키와 기기에 의존하기 때문에 미래 경쟁력이 떨어집니다. 있습니다. 사용자 연락처 정보(예: 이메일 주소, 우편 주소 및 전화번호(가능한 경우 CRM 또는 휴대전화 대신) 있습니다.

각 사용자 목록에는 CrmBasedUserListInfo.upload_key_type 드림 필드를 확인합니다. 또한 UserData 객체를 사용하면 는 단일 사용자를 나타내며 최대 20개의 사용자 식별자를 포함할 수 있습니다. 자체 UserIdentifier 객체가 있습니다. 20개가 넘는 식별자를 사용하면 TOO_MANY_USER_IDENTIFIERS 드림 오류가 발생했습니다.

Google Ads에서는 다음과 같은 조건을 충족하는 경우에만 고객 일치 타겟팅 사용자 목록을 타겟팅에 사용합니다. 광고 게재 시 최소 활성 사용자 수 활성 사용자 수: 리마케팅 목록에 있는 사용자 중 Gmail, Google 검색, YouTube 또는 디스플레이. 회원을 5,000명 이상 업로드하여 활성 사용자를 타겟팅하세요

사용자 연락처 정보 업로드

사용자 이메일 주소, 우편 주소 또는 전화번호를 업로드하려면 upload_key_type에서 CONTACT_INFO(으)로 연락처 정보는 매칭을 위해 Google 계정과 연결되어 있으며 Google Workspace와 같은 계정은 타겟팅할 수 없습니다.

개인 정보 보호 문제(이메일 주소, 이름, 성, 전화번호) 숫자는 업로드하기 전에 SHA-256 알고리즘을 사용하여 해싱해야 합니다. 포함 해싱하기 전에 해시 결과를 표준화하기 위해 다음 작업을 수행해야 합니다.

  • 선행 및 후행 공백을 삭제합니다.
  • 이름, 이메일 주소, 우편 주소: 텍스트를 소문자로 변환합니다.
  • 전화번호: 각 전화번호를 E164로 변환합니다. 형식을 사용해야 합니다. 이 형식은 +로 시작하는 최대 15자리의 전화번호 부호(예: +12125650000 또는 +442070313000)를 입력합니다. 선두 + 선택적으로 생략할 수 있습니다.

이메일 주소의 경우 앞에 있는 모든 마침표 (.)를 삭제할 필요는 없습니다. gmail.com 및 googlemail.com 이메일 주소의 도메인 이름이 여전히 수락됩니다.

해싱하기 전에 연락처 정보의 형식이 올바르지 않으면 API가 해싱된 정보는 수락되지만 고객과 매칭될 수 없습니다.

우편 주소 데이터를 업로드하려면 최소한 다음 정보를 포함해야 합니다.

  • 국가 코드
  • 우편번호
  • 해싱된 이름
  • 해싱된 성

이러한 필드 중 하나라도 누락된 경우 주소를 일치시킬 수 없습니다.

고객 목록에는 하나의 upload_key_type만 포함할 수 있지만 CONTACT_INFO의 upload_key_type에 대해 연락처 정보를 업로드할 수 있습니다. 일치율을 높이려면 이 방법을 사용하는 것이 좋습니다.

CRM ID 업로드

CRM ID로 고객 목록을 채우려면 upload_key_type를 다음으로 설정합니다. CRM_ID CRM ID는 광고주가 생성하고 할당한 사용자 ID에서 일치됩니다. 인스턴스 MOBILE_ADVERTISING_ID개를 업로드하는 것과 비슷하지만 UserIdentifier 객체의 third_party_user_id 필드를 채웁니다.

모바일 신분증 업로드

이메일을 이용한 고객 일치 타겟팅과 마찬가지로 광고 식별자 (IDFA) 또는 Google 광고 ID (AAID) 휴대기기 있습니다. 이렇게 하려면 app_id 속성을 설정하고 upload_key_type를 MOBILE_ADVERTISING_ID 휴대기기 ID를 사용한 고객 일치 타겟팅에 사용자 목록을 사용하기 전

코드 예

다음 예에서는 OfflineUserDataJobOperation를 사용하여 고객을 추가합니다. 연락처 정보를 고객 목록에 추가합니다.

자바

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys "email",
// "phone", "firstName", "lastName", "countryCode", and "postalCode". In your application, this
// data might come from a file or a database.
List<Map<String, String>> rawRecords = new ArrayList<>();
// The first user data has an email address and a phone number.
Map<String, String> rawRecord1 =
    ImmutableMap.<String, String>builder()
        .put("email", "dana@example.com")
        // Phone number to be converted to E.164 format, with a leading '+' as required. This
        // includes whitespace that will be removed later.
        .put("phone", "+1 800 5550101")
        .build();
// The second user data has an email address, a mailing address, and a phone number.
Map<String, String> rawRecord2 =
    ImmutableMap.<String, String>builder()
        // Email address that includes a period (.) before the domain.
        .put("email", "alex.2@example.com")
        // Address that includes all four required elements: first name, last name, country
        // code, and postal code.
        .put("firstName", "Alex")
        .put("lastName", "Quinn")
        .put("countryCode", "US")
        .put("postalCode", "94045")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        .build();
// The third user data only has an email address.
Map<String, String> rawRecord3 =
    ImmutableMap.<String, String>builder().put("email", "charlie@example.com").build();
// Adds the raw records to the raw input list.
rawRecords.add(rawRecord1);
rawRecords.add(rawRecord2);
rawRecords.add(rawRecord3);

// Iterates over the raw input list and creates a UserData object for each record.
List<UserData> userDataList = new ArrayList<>();
for (Map<String, String> rawRecord : rawRecords) {
  // Creates a builder for the UserData object that represents a member of the user list.
  UserData.Builder userDataBuilder = UserData.newBuilder();
  // Checks if the record has email, phone, or address information, and adds a SEPARATE
  // UserIdentifier object for each one found. For example, a record with an email address and a
  // phone number will result in a UserData with two UserIdentifiers.

  // IMPORTANT: Since the identifier attribute of UserIdentifier
  // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
  // oneof
  // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
  // hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
  // than one of these attributes on the same UserIdentifier will clear all the other members
  // of the oneof. For example, the following code is INCORRECT and will result in a
  // UserIdentifier with ONLY a hashedPhoneNumber.
  //
  // UserIdentifier incorrectlyPopulatedUserIdentifier =
  //     UserIdentifier.newBuilder()
  //         .setHashedEmail("...")
  //         .setHashedPhoneNumber("...")
  //         .build();
  //
  // The separate 'if' statements below demonstrate the correct approach for creating a UserData
  // for a member with multiple UserIdentifiers.

  // Checks if the record has an email address, and if so, adds a UserIdentifier for it.
  if (rawRecord.containsKey("email")) {
    UserIdentifier hashedEmailIdentifier =
        UserIdentifier.newBuilder()
            .setHashedEmail(normalizeAndHash(sha256Digest, rawRecord.get("email"), true))
            .build();
    // Adds the hashed email identifier to the UserData object's list.
    userDataBuilder.addUserIdentifiers(hashedEmailIdentifier);
  }

  // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
  if (rawRecord.containsKey("phone")) {
    UserIdentifier hashedPhoneNumberIdentifier =
        UserIdentifier.newBuilder()
            .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone"), true))
            .build();
    // Adds the hashed phone number identifier to the UserData object's list.
    userDataBuilder.addUserIdentifiers(hashedPhoneNumberIdentifier);
  }

  // Checks if the record has all the required mailing address elements, and if so, adds a
  // UserIdentifier for the mailing address.
  if (rawRecord.containsKey("firstName")) {
    // Checks if the record contains all the other required elements of a mailing address.
    Set<String> missingAddressKeys = new HashSet<>();
    for (String addressKey : new String[] {"lastName", "countryCode", "postalCode"}) {
      if (!rawRecord.containsKey(addressKey)) {
        missingAddressKeys.add(addressKey);
      }
    }

    if (!missingAddressKeys.isEmpty()) {
      System.out.printf(
          "Skipping addition of mailing address information because the following required keys"
              + " are missing: %s%n",
          missingAddressKeys);
    } else {
      // Creates an OfflineUserAddressInfo object that contains all the required elements of a
      // mailing address.
      OfflineUserAddressInfo addressInfo =
          OfflineUserAddressInfo.newBuilder()
              .setHashedFirstName(
                  normalizeAndHash(sha256Digest, rawRecord.get("firstName"), false))
              .setHashedLastName(
                  normalizeAndHash(sha256Digest, rawRecord.get("lastName"), false))
              .setCountryCode(rawRecord.get("countryCode"))
              .setPostalCode(rawRecord.get("postalCode"))
              .build();
      UserIdentifier addressIdentifier =
          UserIdentifier.newBuilder().setAddressInfo(addressInfo).build();
      // Adds the address identifier to the UserData object's list.
      userDataBuilder.addUserIdentifiers(addressIdentifier);
    }
  }

  if (!userDataBuilder.getUserIdentifiersList().isEmpty()) {
    // Builds the UserData and adds it to the list.
    userDataList.add(userDataBuilder.build());
  }
}

// Creates the operations to add users.
List<OfflineUserDataJobOperation> operations = new ArrayList<>();
for (UserData userData : userDataList) {
  operations.add(OfflineUserDataJobOperation.newBuilder().setCreate(userData).build());
}
AddCustomerMatchUserList.java

C#

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys
// "email", "phone", "firstName", "lastName", "countryCode", and "postalCode".
// In your application, this data might come from a file or a database.
List<Dictionary<string, string>> rawRecords = new List<Dictionary<string, string>>();

// The first user data has an email address and a phone number.
Dictionary<string, string> rawRecord1 = new Dictionary<string, string>();
rawRecord1.Add("email", "dana@example.com");
// Phone number to be converted to E.164 format, with a leading '+' as required.
// This includes whitespace that will be removed later.
rawRecord1.Add("phone", "+1 800 5550101");

// The second user data has an email address, a mailing address, and a phone number.
Dictionary<string, string> rawRecord2 = new Dictionary<string, string>();
// Email address that includes a period (.) before the Gmail domain.
rawRecord2.Add("email", "alex.2@example.com");
// Address that includes all four required elements: first name, last name, country
// code, and postal code.
rawRecord2.Add("firstName", "Alex");
rawRecord2.Add("lastName", "Quinn");
rawRecord2.Add("countryCode", "US");
rawRecord2.Add("postalCode", "94045");
// Phone number to be converted to E.164 format, with a leading '+' as required.
// This includes whitespace that will be removed later.
rawRecord2.Add("phone", "+1 800 5550102");

// The third user data only has an email address.
Dictionary<string, string> rawRecord3 = new Dictionary<string, string>();
rawRecord3.Add("email", "charlie@example.com");

// Adds the raw records to the raw input list.
rawRecords.Add(rawRecord1);
rawRecords.Add(rawRecord2);
rawRecords.Add(rawRecord3);

// Iterates over the raw input list and creates a UserData object for each record.
List<UserData> userDataList = new List<UserData>();
foreach (Dictionary<string, string> rawRecord in rawRecords) {
    // Creates a UserData object that represents a member of the user list.
    UserData userData = new UserData();
    // Checks if the record has email, phone, or address information, and adds a
    // SEPARATE UserIdentifier object for each one found.
    // For example, a record with an email address and a phone number will result in a
    // UserData with two UserIdentifiers.

    // IMPORTANT: Since the identifier attribute of UserIdentifier
    // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
    // is a oneof
    // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
    // only ONE of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId,
    // or addressInfo.
    // Setting more than one of these attributes on the same UserIdentifier will clear
    // all the other members of the oneof.
    // For example, the following code is INCORRECT and will result in a UserIdentifier
    // with ONLY a hashedPhoneNumber.
    //
    // UserIdentifier incorrectlyPopulatedUserIdentifier = new UserIdentifier()
    // {
    //      HashedEmail = "...",
    //      HashedPhoneNumber = "..."
    // };
    //
    // The separate 'if' statements below demonstrate the correct approach for creating
    // a UserData for a member with multiple UserIdentifiers.

    // Checks if the record has an email address, and if so, adds a UserIdentifier
    // for it.
    if (rawRecord.ContainsKey("email")) {
        UserIdentifier hashedEmailIdentifier = new UserIdentifier()
        {
            HashedEmail = NormalizeAndHash(rawRecord["email"], true)
        };

        userData.UserIdentifiers.Add(hashedEmailIdentifier);
    }

    // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
    if (rawRecord.ContainsKey("phone")) {
        UserIdentifier hashedPhoneNumberIdentifier = new UserIdentifier()
        {
            HashedPhoneNumber = NormalizeAndHash(rawRecord["phone"], true)
        };

        // Adds the hashed phone number identifier to the UserData object's list.
        userData.UserIdentifiers.Add(hashedPhoneNumberIdentifier);
    }

    // Checks if the record has all the required mailing address elements, and if so,
    // adds a UserIdentifier for the mailing address.
    if (rawRecord.ContainsKey("firstName")) {
        // Checks if the record contains all the other required elements of a mailing
        // address.
        HashSet<string> missingAddressKeys = new HashSet<string>();
        foreach (string addressKey in new string[] {"lastName", "countryCode",
            "postalCode"}) {
        if (!rawRecord.ContainsKey(addressKey)) {
            missingAddressKeys.Add(addressKey);
        }
        }

        if (!missingAddressKeys.Any()) {
        Console.WriteLine(
            $"Skipping addition of mailing address information because the following " +
                "required keys are missing: {missingAddressKeys}");
        } else {
            // Creates an OfflineUserAddressInfo object that contains all the required
            // elements of a mailing address.
            OfflineUserAddressInfo addressInfo = new OfflineUserAddressInfo()
            {
                HashedFirstName = NormalizeAndHash(rawRecord["firstName"]),
                HashedLastName = NormalizeAndHash(rawRecord["lastName"]),
                CountryCode = rawRecord["countryCode"],
                PostalCode = rawRecord["postalCode"]
            };

            UserIdentifier addressIdentifier = new UserIdentifier()
            {
                AddressInfo = addressInfo
            };

            // Adds the address identifier to the UserData object's list.
            userData.UserIdentifiers.Add(addressIdentifier);
        }
    }

    if (userData.UserIdentifiers.Any())
    {
        userDataList.Add(userData);
    }
}

// Creates the operations to add the users.
List<OfflineUserDataJobOperation> operations = new List<OfflineUserDataJobOperation>();
foreach(UserData userData in userDataList)
{
    operations.Add(new OfflineUserDataJobOperation()
    {
        Create = userData
    });
}
AddCustomerMatchUserList.cs

PHP

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys 'email',
// 'phone', 'firstName', 'lastName', 'countryCode', and 'postalCode'. In your application,
// this data might come from a file or a database.
$rawRecords = [];
// The first user data has an email address and a phone number.
$rawRecord1 = [
    // The first user data has an email address and a phone number.
    'email' => 'dana@example.com',
    // Phone number to be converted to E.164 format, with a leading '+' as required. This
    // includes whitespace that will be removed later.
    'phone' => '+1 800 5550101'
];
$rawRecords[] = $rawRecord1;

// The second user data has an email address, a mailing address, and a phone number.
$rawRecord2 = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Address that includes all four required elements: first name, last name, country
    // code, and postal code.
    'firstName' => 'Alex',
    'lastName' => 'Quinn',
    'countryCode' => 'US',
    'postalCode' => '94045',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
];
$rawRecords[] = $rawRecord2;

// The third user data only has an email address.
$rawRecord3 = ['email' => 'charlie@example.com'];
$rawRecords[] = $rawRecord3;

// Iterates over the raw input list and creates a UserData object for each record.
$userDataList = [];
foreach ($rawRecords as $rawRecord) {
    // Checks if the record has email, phone, or address information, and adds a SEPARATE
    // UserIdentifier object for each one found. For example, a record with an email address
    // and a phone number will result in a UserData with two UserIdentifiers.

    // IMPORTANT: Since the identifier attribute of UserIdentifier
    // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is
    // a oneof
    // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only
    // ONE of 'hashed_email, 'hashed_phone_number', 'mobile_id', 'third_party_user_id', or
    // 'address_info'.
    // Setting more than one of these attributes on the same UserIdentifier will clear all
    // the other members of the oneof. For example, the following code is INCORRECT and will
    // result in a UserIdentifier with ONLY a 'hashed_phone_number'.
    //
    // $incorrectlyPopulatedUserIdentifier = new UserIdentifier();
    // $incorrectlyPopulatedUserIdentifier->setHashedEmail('...');
    // $incorrectlyPopulatedUserIdentifier->setHashedPhoneNumber('...');
    //
    // The separate 'if' statements below demonstrate the correct approach for creating a
    // UserData for a member with multiple UserIdentifiers.

    $userIdentifiers = [];
    // Checks if the record has an email address, and if so, adds a UserIdentifier for it.
    if (array_key_exists('email', $rawRecord)) {
        $hashedEmailIdentifier = new UserIdentifier([
            'hashed_email' => self::normalizeAndHash($rawRecord['email'], true)
        ]);
        // Adds the hashed email identifier to the user identifiers list.
        $userIdentifiers[] = $hashedEmailIdentifier;
    }

    // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
    if (array_key_exists('phone', $rawRecord)) {
        $hashedPhoneNumberIdentifier = new UserIdentifier([
            'hashed_phone_number' => self::normalizeAndHash($rawRecord['phone'], true)
        ]);
        // Adds the hashed email identifier to the user identifiers list.
        $userIdentifiers[] = $hashedPhoneNumberIdentifier;
    }

    // Checks if the record has all the required mailing address elements, and if so, adds a
    // UserIdentifier for the mailing address.
    if (array_key_exists('firstName', $rawRecord)) {
        // Checks if the record contains all the other required elements of a mailing
        // address.
        $missingAddressKeys = [];
        foreach (['lastName', 'countryCode', 'postalCode'] as $addressKey) {
            if (!array_key_exists($addressKey, $rawRecord)) {
                $missingAddressKeys[] = $addressKey;
            }
        }
        if (!empty($missingAddressKeys)) {
            printf(
                "Skipping addition of mailing address information because the "
                . "following required keys are missing: %s%s",
                json_encode($missingAddressKeys),
                PHP_EOL
            );
        } else {
            // Creates an OfflineUserAddressInfo object that contains all the required
            // elements of a mailing address.
            $addressIdentifier = new UserIdentifier([
               'address_info' => new OfflineUserAddressInfo([
                   'hashed_first_name' => self::normalizeAndHash(
                       $rawRecord['firstName'],
                       false
                   ),
                   'hashed_last_name' => self::normalizeAndHash(
                       $rawRecord['lastName'],
                       false
                   ),
                   'country_code' => $rawRecord['countryCode'],
                   'postal_code' => $rawRecord['postalCode']
               ])
            ]);
            // Adds the address identifier to the user identifiers list.
            $userIdentifiers[] = $addressIdentifier;
        }
    }
    if (!empty($userIdentifiers)) {
        // Builds the UserData and adds it to the list.
        $userDataList[] = new UserData(['user_identifiers' => $userIdentifiers]);
    }
}

// Creates the operations to add users.
$operations = array_map(
    function (UserData $userData) {
        return new OfflineUserDataJobOperation(['create' => $userData]);
    },
    $userDataList
);
AddCustomerMatchUserList.php

Python

def build_offline_user_data_job_operations(client):
    """Creates a raw input list of unhashed user information.

    Each element of the list represents a single user and is a dict containing a
    separate entry for the keys "email", "phone", "first_name", "last_name",
    "country_code", and "postal_code". In your application, this data might come
    from a file or a database.

    Args:
        client: The Google Ads client.

    Returns:
        A list containing the operations.
    """
    # The first user data has an email address and a phone number.
    raw_record_1 = {
        "email": "dana@example.com",
        # Phone number to be converted to E.164 format, with a leading '+' as
        # required. This includes whitespace that will be removed later.
        "phone": "+1 800 5550101",
    }

    # The second user data has an email address, a mailing address, and a phone
    # number.
    raw_record_2 = {
        # Email address that includes a period (.) before the email domain.
        "email": "alex.2@example.com",
        # Address that includes all four required elements: first name, last
        # name, country code, and postal code.
        "first_name": "Alex",
        "last_name": "Quinn",
        "country_code": "US",
        "postal_code": "94045",
        # Phone number to be converted to E.164 format, with a leading '+' as
        # required.
        "phone": "+1 800 5550102",
    }

    # The third user data only has an email address.
    raw_record_3 = {"email": "charlie@example.com"}

    # Adds the raw records to a raw input list.
    raw_records = [raw_record_1, raw_record_2, raw_record_3]

    operations = []
    # Iterates over the raw input list and creates a UserData object for each
    # record.
    for record in raw_records:
        # Creates a UserData object that represents a member of the user list.
        user_data = client.get_type("UserData")

        # Checks if the record has email, phone, or address information, and
        # adds a SEPARATE UserIdentifier object for each one found. For example,
        # a record with an email address and a phone number will result in a
        # UserData with two UserIdentifiers.

        # IMPORTANT: Since the identifier attribute of UserIdentifier
        # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
        # is a oneof
        # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you
        # must set only ONE of hashed_email, hashed_phone_number, mobile_id,
        # third_party_user_id, or address-info. Setting more than one of these
        # attributes on the same UserIdentifier will clear all the other members
        # of the oneof. For example, the following code is INCORRECT and will
        # result in a UserIdentifier with ONLY a hashed_phone_number:

        # incorrect_user_identifier = client.get_type("UserIdentifier")
        # incorrect_user_identifier.hashed_email = "..."
        # incorrect_user_identifier.hashed_phone_number = "..."

        # The separate 'if' statements below demonstrate the correct approach
        # for creating a UserData object for a member with multiple
        # UserIdentifiers.

        # Checks if the record has an email address, and if so, adds a
        # UserIdentifier for it.
        if "email" in record:
            user_identifier = client.get_type("UserIdentifier")
            user_identifier.hashed_email = normalize_and_hash(
                record["email"], True
            )
            # Adds the hashed email identifier to the UserData object's list.
            user_data.user_identifiers.append(user_identifier)

        # Checks if the record has a phone number, and if so, adds a
        # UserIdentifier for it.
        if "phone" in record:
            user_identifier = client.get_type("UserIdentifier")
            user_identifier.hashed_phone_number = normalize_and_hash(
                record["phone"], True
            )
            # Adds the hashed phone number identifier to the UserData object's
            # list.
            user_data.user_identifiers.append(user_identifier)

        # Checks if the record has all the required mailing address elements,
        # and if so, adds a UserIdentifier for the mailing address.
        if "first_name" in record:
            required_keys = ("last_name", "country_code", "postal_code")
            # Checks if the record contains all the other required elements of
            # a mailing address.
            if not all(key in record for key in required_keys):
                # Determines which required elements are missing from the
                # record.
                missing_keys = record.keys() - required_keys
                print(
                    "Skipping addition of mailing address information "
                    "because the following required keys are missing: "
                    f"{missing_keys}"
                )
            else:
                user_identifier = client.get_type("UserIdentifier")
                address_info = user_identifier.address_info
                address_info.hashed_first_name = normalize_and_hash(
                    record["first_name"], False
                )
                address_info.hashed_last_name = normalize_and_hash(
                    record["last_name"], False
                )
                address_info.country_code = record["country_code"]
                address_info.postal_code = record["postal_code"]
                user_data.user_identifiers.append(user_identifier)

        # If the user_identifiers repeated field is not empty, create a new
        # OfflineUserDataJobOperation and add the UserData to it.
        if user_data.user_identifiers:
            operation = client.get_type("OfflineUserDataJobOperation")
            operation.create = user_data
            operations.append(operation)
add_customer_match_user_list.py

Ruby

# Create a list of unhashed user data records that we will format in the
# following steps to prepare for the API.
raw_records = [
  # The first user data has an email address and a phone number.
  {
    email: 'dana@example.com',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required. This includes whitespace that will be removed later.
    phone: '+1 800 5550100',
  },
  # The second user data has an email address, a phone number, and an address.
  {
    # Email address that includes a period (.) before the Gmail domain.
    email: 'alex.2@example.com',
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    first_name: 'Alex',
    last_name: 'Quinn',
    country_code: 'US',
    postal_code: '94045',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    phone: '+1 800 5550102',
  },
  # The third user data only has an email address.
  {
    email: 'charlie@example.com',
  },
]

# Create a UserData for each entry in the raw records.
user_data_list = raw_records.map do |record|
  client.resource.user_data do |data|
    if record[:email]
      data.user_identifiers << client.resource.user_identifier do |ui|
        ui.hashed_email = normalize_and_hash(record[:email], true)
      end
    end
    if record[:phone]
      data.user_identifiers << client.resource.user_identifier do |ui|
        ui.hashed_phone_number = normalize_and_hash(record[:phone], true)
      end
    end
    if record[:first_name]
      # Check that we have all the required information.
      missing_keys = [:last_name, :country_code, :postal_code].reject {|key|
        record[key].nil?
      }
      if missing_keys.empty?
        # If nothing is missing, add the address.
        data.user_identifiers << client.resource.user_identifier do |ui|
          ui.address_identifier = client.resource.offline_user_address_info do |address|
            address.hashed_first_name = normalize_and_hash(record[:first_name])
            address.hashed_last_name = normalize_and_hash(record[:last_name])
            address.country_code = record[:country_code]
            address.postal_code = record[:postal_code]
          end
        end
      else
        # If some data is missing, skip this entry.
        puts "Skipping addition of mailing information because the following keys are missing:" \
          "#{missing_keys}"
      end
    end
  end
end

operations = user_data_list.map do |user_data|
  client.operation.create_resource.offline_user_data_job(user_data)
end
add_customer_match_user_list.rb

Perl

  # The first user data has an email address and a phone number.
  my $raw_record_1 = {
    email => 'dana@example.com',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required. This includes whitespace that will be removed later.
    phone => '+1 800 5550101',
  };

  # The second user data has an email address, a mailing address, and a phone
  # number.
  my $raw_record_2 = {
    # Email address that includes a period (.) before the Gmail domain.
    email => 'alex.2@example.com',
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    firstName   => 'Alex',
    lastName    => 'Quinn',
    countryCode => 'US',
    postalCode  => '94045',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    phone => '+1 800 5550102',
  };

  # The third user data only has an email address.
  my $raw_record_3 = {email => 'charlie@example.com',};

  my $raw_records = [$raw_record_1, $raw_record_2, $raw_record_3];

  my $operations = [];
  foreach my $record (@$raw_records) {
    # Check if the record has email, phone, or address information, and adds a
    # SEPARATE UserIdentifier object for each one found. For example, a record
    # with an email address and a phone number will result in a UserData with two
    # UserIdentifiers.
    #
    # IMPORTANT: Since the identifier attribute of UserIdentifier
    # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
    # is a oneof
    # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
    # only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
    # or address-info. Setting more than one of these attributes on the same UserIdentifier
    # will clear all the other members of the oneof. For example, the following code is
    # INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
    #
    # my $incorrect_user_identifier = Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
    #   hashedEmail => '...',
    #   hashedPhoneNumber => '...',
    # });
    #
    # The separate 'if' statements below demonstrate the correct approach for creating a
    # UserData object for a member with multiple UserIdentifiers.

    my $user_identifiers = [];

    # Check if the record has an email address, and if so, add a UserIdentifier for it.
    if (defined $record->{email}) {
      # Add the hashed email identifier to the list of UserIdentifiers.
      push(
        @$user_identifiers,
        Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
            hashedEmail => normalize_and_hash($record->{email}, 1)}));
    }

    # Check if the record has a phone number, and if so, add a UserIdentifier for it.
    if (defined $record->{phone}) {
      # Add the hashed phone number identifier to the list of UserIdentifiers.
      push(
        @$user_identifiers,
        Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
            hashedPhoneNumber => normalize_and_hash($record->{phone}, 1)}));
    }

    # Check if the record has all the required mailing address elements, and if so, add
    # a UserIdentifier for the mailing address.
    if (defined $record->{firstName}) {
      my $required_keys = ["lastName", "countryCode", "postalCode"];
      my $missing_keys  = [];

      foreach my $key (@$required_keys) {
        if (!defined $record->{$key}) {
          push(@$missing_keys, $key);
        }
      }

      if (@$missing_keys) {
        print
"Skipping addition of mailing address information because the following"
          . "keys are missing: "
          . join(",", @$missing_keys);
      } else {
        push(
          @$user_identifiers,
          Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
              addressInfo =>
                Google::Ads::GoogleAds::V17::Common::OfflineUserAddressInfo->
                new({
                  # First and last name must be normalized and hashed.
                  hashedFirstName => normalize_and_hash($record->{firstName}),
                  hashedLastName  => normalize_and_hash($record->{lastName}),
                  # Country code and zip code are sent in plain text.
                  countryCode => $record->{countryCode},
                  postalCode  => $record->{postalCode},
                })}));
      }
    }

    # If the user_identifiers array is not empty, create a new
    # OfflineUserDataJobOperation and add the UserData to it.
    if (@$user_identifiers) {
      my $user_data = Google::Ads::GoogleAds::V17::Common::UserData->new({
          userIdentifiers => [$user_identifiers]});
      push(
        @$operations,
        Google::Ads::GoogleAds::V17::Services::OfflineUserDataJobService::OfflineUserDataJobOperation
          ->new({
            create => $user_data
          }));
    }
  }
add_customer_match_user_list.pl

목록 업로드 및 일치율 확인

OfflineUserDataJob에 SUCCESS가 있으면 status인 경우 예상 일치율은 에서 사용할 수 있는 operation_metadata.match_rate_range 필드를 확인합니다. 작업이 완료되기 전에 이 필드를 쿼리하면 이 필드의 값이 0일 수 있습니다. 일치율을 확인하고 목록을 위해 작업을 완료할 준비가 되면 완료를 위해 작업을 폴링하는 것이 좋습니다. 계좌에 입금되기까지 작업을 완료하는 데 최소 10분 또는 최대 24시간이 걸릴 수 있습니다.

작업 상태를 확인하는 코드 예시

자바

private void checkJobStatus(
    GoogleAdsClient googleAdsClient, long customerId, String offlineUserDataJobResourceName) {
  try (GoogleAdsServiceClient googleAdsServiceClient =
      googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
    String query =
        String.format(
            "SELECT offline_user_data_job.resource_name, "
                + "offline_user_data_job.id, "
                + "offline_user_data_job.status, "
                + "offline_user_data_job.type, "
                + "offline_user_data_job.failure_reason, "
                + "offline_user_data_job.customer_match_user_list_metadata.user_list "
                + "FROM offline_user_data_job "
                + "WHERE offline_user_data_job.resource_name = '%s'",
            offlineUserDataJobResourceName);
    // Issues the query and gets the GoogleAdsRow containing the job from the response.
    GoogleAdsRow googleAdsRow =
        googleAdsServiceClient
            .search(Long.toString(customerId), query)
            .iterateAll()
            .iterator()
            .next();
    OfflineUserDataJob offlineUserDataJob = googleAdsRow.getOfflineUserDataJob();
    System.out.printf(
        "Offline user data job ID %d with type '%s' has status: %s%n",
        offlineUserDataJob.getId(), offlineUserDataJob.getType(), offlineUserDataJob.getStatus());
    OfflineUserDataJobStatus jobStatus = offlineUserDataJob.getStatus();
    if (OfflineUserDataJobStatus.SUCCESS == jobStatus) {
      // Prints information about the user list.
      printCustomerMatchUserListInfo(
          googleAdsClient,
          customerId,
          offlineUserDataJob.getCustomerMatchUserListMetadata().getUserList());
    } else if (OfflineUserDataJobStatus.FAILED == jobStatus) {
      System.out.printf("  Failure reason: %s%n", offlineUserDataJob.getFailureReason());
    } else if (OfflineUserDataJobStatus.PENDING == jobStatus
        || OfflineUserDataJobStatus.RUNNING == jobStatus) {
      System.out.println();
      System.out.printf(
          "To check the status of the job periodically, use the following GAQL query with"
              + " GoogleAdsService.search:%n%s%n",
          query);
    }
  }
}

AddCustomerMatchUserList.java

C#

private static void CheckJobStatusAndPrintResults(GoogleAdsClient client, long customerId,
    string offlineUserDataJobResourceName)
{
    // Get the GoogleAdsService.
    GoogleAdsServiceClient service = client.GetService(Services.V17.GoogleAdsService);

    string query = "SELECT offline_user_data_job.resource_name, " +
        "offline_user_data_job.id, offline_user_data_job.status, " +
        "offline_user_data_job.type, offline_user_data_job.failure_reason " +
        "offline_user_data_job.customer_match_user_list_metadata_user_list " +
        "FROM offline_user_data_job WHERE " +
        $"offline_user_data_job.resource_name = '{offlineUserDataJobResourceName}'";

    // Issues the query and gets the GoogleAdsRow containing the job from the response.
    GoogleAdsRow googleAdsRow = service.Search(customerId.ToString(), query).First();

    OfflineUserDataJob offlineUserDataJob = googleAdsRow.OfflineUserDataJob;
    Console.WriteLine($"Offline user data job ID {offlineUserDataJob.Id} with type " +
        $"'{offlineUserDataJob.Type}' has status: {offlineUserDataJob.Status}");

    switch (offlineUserDataJob.Status)
    {
        case OfflineUserDataJobStatus.Success:
            // Prints information about the user list.
            PrintCustomerMatchUserListInfo(client, customerId,
                offlineUserDataJob.CustomerMatchUserListMetadata.UserList);
            break;

        case OfflineUserDataJobStatus.Failed:
            Console.WriteLine($"  Failure reason: {offlineUserDataJob.FailureReason}");
            break;

        case OfflineUserDataJobStatus.Pending:
        case OfflineUserDataJobStatus.Running:
            Console.WriteLine("To check the status of the job periodically, use the " +
                $"following GAQL query with GoogleAdsService.search:\n\n{query}");
            break;
    }
}
AddCustomerMatchUserList.cs

PHP

private static function checkJobStatus(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    string $offlineUserDataJobResourceName
) {
    $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();

    // Creates a query that retrieves the offline user data job.
    $query = "SELECT offline_user_data_job.resource_name, "
          . "offline_user_data_job.id, "
          . "offline_user_data_job.status, "
          . "offline_user_data_job.type, "
          . "offline_user_data_job.failure_reason, "
          . "offline_user_data_job.customer_match_user_list_metadata.user_list "
          . "FROM offline_user_data_job "
          . "WHERE offline_user_data_job.resource_name = '$offlineUserDataJobResourceName'";

    // Issues a search request to get the GoogleAdsRow containing the job from the response.
    /** @var GoogleAdsRow $googleAdsRow */
    $googleAdsRow =
        $googleAdsServiceClient->search(SearchGoogleAdsRequest::build($customerId, $query))
            ->getIterator()
            ->current();
    $offlineUserDataJob = $googleAdsRow->getOfflineUserDataJob();

    // Prints out some information about the offline user data job.
    $offlineUserDataJobStatus = $offlineUserDataJob->getStatus();
    printf(
        "Offline user data job ID %d with type '%s' has status: %s.%s",
        $offlineUserDataJob->getId(),
        OfflineUserDataJobType::name($offlineUserDataJob->getType()),
        OfflineUserDataJobStatus::name($offlineUserDataJobStatus),
        PHP_EOL
    );

    if ($offlineUserDataJobStatus === OfflineUserDataJobStatus::SUCCESS) {
        // Prints information about the user list.
        self::printCustomerMatchUserListInfo(
            $googleAdsClient,
            $customerId,
            $offlineUserDataJob->getCustomerMatchUserListMetadata()->getUserList()
        );
    } elseif ($offlineUserDataJobStatus === OfflineUserDataJobStatus::FAILED) {
        printf("  Failure reason: %s.%s", $offlineUserDataJob->getFailureReason(), PHP_EOL);
    } elseif (
        $offlineUserDataJobStatus === OfflineUserDataJobStatus::PENDING
        || $offlineUserDataJobStatus === OfflineUserDataJobStatus::RUNNING
    ) {
        printf(
            '%1$sTo check the status of the job periodically, use the following GAQL query with'
            . ' GoogleAdsService.search:%1$s%2$s%1$s',
            PHP_EOL,
            $query
        );
    }
}
AddCustomerMatchUserList.php

Python

def check_job_status(client, customer_id, offline_user_data_job_resource_name):
    """Retrieves, checks, and prints the status of the offline user data job.

    If the job is completed successfully, information about the user list is
    printed. Otherwise, a GAQL query will be printed, which can be used to
    check the job status at a later date.

    Offline user data jobs may take 6 hours or more to complete, so checking the
    status periodically, instead of waiting, can be more efficient.

    Args:
        client: The Google Ads client.
        customer_id: The ID for the customer that owns the user list.
        offline_user_data_job_resource_name: The resource name of the offline
            user data job to get the status of.
    """
    query = f"""
        SELECT
          offline_user_data_job.resource_name,
          offline_user_data_job.id,
          offline_user_data_job.status,
          offline_user_data_job.type,
          offline_user_data_job.failure_reason,
          offline_user_data_job.customer_match_user_list_metadata.user_list
        FROM offline_user_data_job
        WHERE offline_user_data_job.resource_name =
          '{offline_user_data_job_resource_name}'
        LIMIT 1"""

    # Issues a search request using streaming.
    google_ads_service = client.get_service("GoogleAdsService")
    results = google_ads_service.search(customer_id=customer_id, query=query)
    offline_user_data_job = next(iter(results)).offline_user_data_job
    status_name = offline_user_data_job.status.name
    user_list_resource_name = (
        offline_user_data_job.customer_match_user_list_metadata.user_list
    )

    print(
        f"Offline user data job ID '{offline_user_data_job.id}' with type "
        f"'{offline_user_data_job.type_.name}' has status: {status_name}"
    )

    if status_name == "SUCCESS":
        print_customer_match_user_list_info(
            client, customer_id, user_list_resource_name
        )
    elif status_name == "FAILED":
        print(f"\tFailure Reason: {offline_user_data_job.failure_reason}")
    elif status_name in ("PENDING", "RUNNING"):
        print(
            "To check the status of the job periodically, use the following "
            f"GAQL query with GoogleAdsService.Search: {query}"
        )
add_customer_match_user_list.py

Ruby

def check_job_status(client, customer_id, offline_user_data_job)
  query = <<~QUERY
    SELECT
      offline_user_data_job.id,
      offline_user_data_job.status,
      offline_user_data_job.type,
      offline_user_data_job.failure_reason,
      offline_user_data_job.customer_match_user_list_metadata.user_list
    FROM
      offline_user_data_job
    WHERE
      offline_user_data_job.resource_name = '#{offline_user_data_job}'
  QUERY

  row = client.service.google_ads.search(
    customer_id: customer_id,
    query: query,
  ).first

  job = row.offline_user_data_job
  puts "Offline user data job ID #{job.id} with type '#{job.type}' has status: #{job.status}."

  case job.status
  when :SUCCESS
    print_customer_match_user_list(client, customer_id, job.customer_match_user_list_metadata.user_list)
  when :FAILED
    puts "  Failure reason: #{job.failure_reason}"
  else
    puts "  To check the status of the job periodically, use the following GAQL " \
      "query with GoogleAdsService.search:"
    puts query
  end
end
add_customer_match_user_list.rb

Perl

sub check_job_status() {
  my ($api_client, $customer_id, $offline_user_data_job_resource_name) = @_;

  my $search_query =
    "SELECT offline_user_data_job.resource_name, " .
    "offline_user_data_job.id, offline_user_data_job.status, " .
    "offline_user_data_job.type, offline_user_data_job.failure_reason, " .
    "offline_user_data_job.customer_match_user_list_metadata.user_list " .
    "FROM offline_user_data_job " .
    "WHERE offline_user_data_job.resource_name = " .
    "$offline_user_data_job_resource_name LIMIT 1";

  my $search_request =
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::SearchGoogleAdsRequest
    ->new({
      customerId => $customer_id,
      query      => $search_query
    });

  # Get the GoogleAdsService.
  my $google_ads_service = $api_client->GoogleAdsService();

  my $iterator = Google::Ads::GoogleAds::Utils::SearchGoogleAdsIterator->new({
    service => $google_ads_service,
    request => $search_request
  });

  # The results have exactly one row.
  my $google_ads_row        = $iterator->next;
  my $offline_user_data_job = $google_ads_row->{offlineUserDataJob};
  my $status                = $offline_user_data_job->{status};

  printf
    "Offline user data job ID %d with type %s has status: %s.\n",
    $offline_user_data_job->{id},
    $offline_user_data_job->{type},
    $status;

  if ($status eq SUCCESS) {
    print_customer_match_user_list_info($api_client, $customer_id,
      $offline_user_data_job->{customerMatchUserListMetadata}{userList});
  } elsif ($status eq FAILED) {
    print "Failure reason: $offline_user_data_job->{failure_reason}";
  } elsif (grep /$status/, (PENDING, RUNNING)) {
    print
      "To check the status of the job periodically, use the following GAQL " .
      "query with the GoogleAdsService->search() method:\n$search_query\n";
  }

  return 1;
}
add_customer_match_user_list.pl

목록 크기를 확인하려면 user_list 리소스

user_list 리소스를 쿼리하는 코드 예시

자바

try (GoogleAdsServiceClient googleAdsServiceClient =
    googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
  // Creates a query that retrieves the user list.
  String query =
      String.format(
          "SELECT user_list.size_for_display, user_list.size_for_search "
              + "FROM user_list "
              + "WHERE user_list.resource_name = '%s'",
          userListResourceName);

  // Constructs the SearchGoogleAdsStreamRequest.
  SearchGoogleAdsStreamRequest request =
      SearchGoogleAdsStreamRequest.newBuilder()
          .setCustomerId(Long.toString(customerId))
          .setQuery(query)
          .build();

  // Issues the search stream request.
  ServerStream<SearchGoogleAdsStreamResponse> stream =
      googleAdsServiceClient.searchStreamCallable().call(request);
AddCustomerMatchUserList.java

C#

 // Get the GoogleAdsService.
 GoogleAdsServiceClient service =
     client.GetService(Services.V17.GoogleAdsService);

 // Creates a query that retrieves the user list.
 string query =
     "SELECT user_list.size_for_display, user_list.size_for_search " +
     "FROM user_list " +
     $"WHERE user_list.resource_name = '{userListResourceName}'";
 // Issues a search stream request.
 service.SearchStream(customerId.ToString(), query,
    delegate (SearchGoogleAdsStreamResponse resp)
    {
        // Display the results.
        foreach (GoogleAdsRow userListRow in resp.Results)
        {
            UserList userList = userListRow.UserList;
            Console.WriteLine("The estimated number of users that the user list " +
                $"'{userList.ResourceName}' has is {userList.SizeForDisplay}" +
                $" for Display and {userList.SizeForSearch} for Search.");
        }
    }
);
AddCustomerMatchUserList.cs

PHP

$googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();

// Creates a query that retrieves the user list.
$query =
    "SELECT user_list.size_for_display, user_list.size_for_search " .
    "FROM user_list " .
    "WHERE user_list.resource_name = '$userListResourceName'";

// Issues a search stream request.
/** @var GoogleAdsServerStreamDecorator $stream */
$stream = $googleAdsServiceClient->searchStream(
    SearchGoogleAdsStreamRequest::build($customerId, $query)
);
AddCustomerMatchUserList.php

Python

googleads_service_client = client.get_service("GoogleAdsService")

# Creates a query that retrieves the user list.
query = f"""
    SELECT
      user_list.size_for_display,
      user_list.size_for_search
    FROM user_list
    WHERE user_list.resource_name = '{user_list_resource_name}'"""

# Issues a search request.
search_results = googleads_service_client.search(
    customer_id=customer_id, query=query
)
add_customer_match_user_list.py

Ruby

query = <<~EOQUERY
  SELECT user_list.size_for_display, user_list.size_for_search
  FROM user_list
  WHERE user_list.resource_name = #{user_list}
EOQUERY

response = client.service.google_ads.search_stream(
  customer_id: customer_id,
  query: query,
)
add_customer_match_user_list.rb

Perl

# Create a query that retrieves the user list.
my $search_query =
  "SELECT user_list.size_for_display, user_list.size_for_search " .
  "FROM user_list " .
  "WHERE user_list.resource_name = '$user_list_resource_name'";

# Create a search Google Ads stream request that will retrieve the user list.
my $search_stream_request =
  Google::Ads::GoogleAds::V17::Services::GoogleAdsService::SearchGoogleAdsStreamRequest
  ->new({
    customerId => $customer_id,
    query      => $search_query,
  });

# Get the GoogleAdsService.
my $google_ads_service = $api_client->GoogleAdsService();

my $search_stream_handler =
  Google::Ads::GoogleAds::Utils::SearchStreamHandler->new({
    service => $google_ads_service,
    request => $search_stream_request
  });
add_customer_match_user_list.pl

개인 정보 보호를 위해 목록이 1,000명 이상이어야 합니다. 그 후에는 크기가 가장 큰 숫자입니다.

OfflineUserDataJob 실행 중에 발생하는 오류는 다음을 통해 가져올 수 있습니다. offline_user_data_job 쿼리 언어를 사용하여 리소스를 검색할 수 있습니다. 그러나 이 보고서에는 일치하지 않을 때 해시만 비교되므로 실패한 일치에 대한 정보 있습니다. 문제 해결 도움말을 참고합니다. 가이드 고객 목록에 문제가 발생할 경우

Google Ads UI와 비교

잠재고객 관리자에서 목록을 볼 때 목록이 예상보다 작게 표시될 수 있습니다. Google Ads UI에서 확인할 수 있습니다 이 보기에는 목록의 활성 사용자 수가 표시됩니다. 자세한 내용은 이 문제 해결을 참조하세요. 가이드를 참조하세요.

목록에 회원 목록이 채워지는 데 최대 24시간이 걸릴 수 있으므로 In Progress이(가) 표시될 수 있습니다. 상태를 확인하세요. 12시간마다 한 번 이상 잠재고객 목록에 업로드하는 빈도

내 목록 타겟팅

광고그룹 수준 또는 캠페인 수준에서 목록을 타겟팅할 수 있습니다. 이 API의 다른 타겟팅 기준 유형과 유사합니다.

광고그룹의 광고를 사용자 목록에 타겟팅하는 코드 예시

자바

private String targetAdsInAdGroupToUserList(
    GoogleAdsClient googleAdsClient, long customerId, long adGroupId, String userList) {
  // Creates the ad group criterion targeting members of the user list.
  AdGroupCriterion adGroupCriterion =
      AdGroupCriterion.newBuilder()
          .setAdGroup(ResourceNames.adGroup(customerId, adGroupId))
          .setUserList(UserListInfo.newBuilder().setUserList(userList).build())
          .build();

  // Creates the operation.
  AdGroupCriterionOperation operation =
      AdGroupCriterionOperation.newBuilder().setCreate(adGroupCriterion).build();

  // Creates the ad group criterion service.
  try (AdGroupCriterionServiceClient adGroupCriterionServiceClient =
      googleAdsClient.getLatestVersion().createAdGroupCriterionServiceClient()) {
    // Adds the ad group criterion.
    MutateAdGroupCriteriaResponse response =
        adGroupCriterionServiceClient.mutateAdGroupCriteria(
            Long.toString(customerId), ImmutableList.of(operation));
    // Gets and prints the results.
    String adGroupCriterionResourceName = response.getResults(0).getResourceName();
    System.out.printf(
        "Successfully created ad group criterion with resource name '%s' "
            + "targeting user list with resource name '%s' with ad group with ID %d.%n",
        adGroupCriterionResourceName, userList, adGroupId);
    return adGroupCriterionResourceName;
  }
}

SetUpRemarketing.java

C#

private string TargetAdsInAdGroupToUserList(
    GoogleAdsClient client, long customerId, long adGroupId, string userListResourceName)
{
    // Get the AdGroupCriterionService client.
    AdGroupCriterionServiceClient adGroupCriterionServiceClient = client.GetService
        (Services.V17.AdGroupCriterionService);

    // Create the ad group criterion targeting members of the user list.
    AdGroupCriterion adGroupCriterion = new AdGroupCriterion
    {
        AdGroup = ResourceNames.AdGroup(customerId, adGroupId),
        UserList = new UserListInfo
        {
            UserList = userListResourceName
        }
    };

    // Create the operation.
    AdGroupCriterionOperation adGroupCriterionOperation = new AdGroupCriterionOperation
    {
        Create = adGroupCriterion
    };

    // Add the ad group criterion, then print and return the new criterion's resource name.
    MutateAdGroupCriteriaResponse mutateAdGroupCriteriaResponse =
        adGroupCriterionServiceClient.MutateAdGroupCriteria(customerId.ToString(),
            new[] { adGroupCriterionOperation });

    string adGroupCriterionResourceName =
        mutateAdGroupCriteriaResponse.Results.First().ResourceName;
    Console.WriteLine("Successfully created ad group criterion with resource name " +
        $"'{adGroupCriterionResourceName}' targeting user list with resource name " +
        $"'{userListResourceName}' with ad group with ID {adGroupId}.");
    return adGroupCriterionResourceName;
}
SetUpRemarketing.cs

PHP

private static function targetAdsInAdGroupToUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $adGroupId,
    string $userListResourceName
): string {
    // Creates the ad group criterion targeting members of the user list.
    $adGroupCriterion = new AdGroupCriterion([
        'ad_group' => ResourceNames::forAdGroup($customerId, $adGroupId),
        'user_list' => new UserListInfo(['user_list' => $userListResourceName])
    ]);

    // Creates the operation.
    $operation = new AdGroupCriterionOperation();
    $operation->setCreate($adGroupCriterion);

    // Issues a mutate request to add an ad group criterion.
    $adGroupCriterionServiceClient = $googleAdsClient->getAdGroupCriterionServiceClient();
    /** @var MutateAdGroupCriteriaResponse $adGroupCriterionResponse */
    $adGroupCriterionResponse = $adGroupCriterionServiceClient->mutateAdGroupCriteria(
        MutateAdGroupCriteriaRequest::build($customerId, [$operation])
    );

    $adGroupCriterionResourceName =
        $adGroupCriterionResponse->getResults()[0]->getResourceName();
    printf(
        "Successfully created ad group criterion with resource name '%s' " .
        "targeting user list with resource name '%s' with ad group with ID %d.%s",
        $adGroupCriterionResourceName,
        $userListResourceName,
        $adGroupId,
        PHP_EOL
    );

    return $adGroupCriterionResourceName;
}
SetUpRemarketing.php

Python

def target_ads_in_ad_group_to_user_list(
    client, customer_id, ad_group_id, user_list_resource_name
):
    """Creates an ad group criterion that targets a user list with an ad group.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID used to create an ad group
            criterion.
        ad_group_id: a str ID for an ad group used to create an ad group
            criterion that targets members of a user list.
        user_list_resource_name: a str resource name for a user list.

    Returns:
        a str resource name for an ad group criterion.
    """
    ad_group_criterion_operation = client.get_type("AdGroupCriterionOperation")
    # Creates the ad group criterion targeting members of the user list.
    ad_group_criterion = ad_group_criterion_operation.create
    ad_group_criterion.ad_group = client.get_service(
        "AdGroupService"
    ).ad_group_path(customer_id, ad_group_id)
    ad_group_criterion.user_list.user_list = user_list_resource_name

    ad_group_criterion_service = client.get_service("AdGroupCriterionService")
    response = ad_group_criterion_service.mutate_ad_group_criteria(
        customer_id=customer_id, operations=[ad_group_criterion_operation]
    )
    resource_name = response.results[0].resource_name
    print(
        "Successfully created ad group criterion with resource name: "
        f"'{resource_name}' targeting user list with resource name: "
        f"'{user_list_resource_name}' and with ad group with ID "
        f"{ad_group_id}."
    )
    return resource_name
set_up_remarketing.py

Ruby

def target_ads_in_ad_group_to_user_list(
  client,
  customer_id,
  ad_group_id,
  user_list
)
  # Creates the ad group criterion targeting members of the user list.
  operation = client.operation.create_resource.ad_group_criterion do |agc|
    agc.ad_group = client.path.ad_group(customer_id, ad_group_id)
    agc.user_list = client.resource.user_list_info do |info|
      info.user_list = user_list
    end
  end

  # Issues a mutate request to create the ad group criterion.
  response = client.service.ad_group_criterion.mutate_ad_group_criteria(
    customer_id: customer_id,
    operations: [operation],
  )
  ad_group_criterion_resource_name = response.results.first.resource_name
  puts "Successfully created ad group criterion with resource name " \
    "'#{ad_group_criterion_resource_name}' targeting user list with resource name " \
    "'#{user_list}' with ad group with ID #{ad_group_id}"

  ad_group_criterion_resource_name
end
set_up_remarketing.rb

Perl

sub target_ads_in_ad_group_to_user_list {
  my ($api_client, $customer_id, $ad_group_id, $user_list_resource_name) = @_;

  # Create the ad group criterion targeting members of the user list.
  my $ad_group_criterion =
    Google::Ads::GoogleAds::V17::Resources::AdGroupCriterion->new({
      adGroup => Google::Ads::GoogleAds::V17::Utils::ResourceNames::ad_group(
        $customer_id, $ad_group_id
      ),
      userList => Google::Ads::GoogleAds::V17::Common::UserListInfo->new({
          userList => $user_list_resource_name
        })});

  # Create the operation.
  my $ad_group_criterion_operation =
    Google::Ads::GoogleAds::V17::Services::AdGroupCriterionService::AdGroupCriterionOperation
    ->new({
      create => $ad_group_criterion
    });

  # Add the ad group criterion, then print and return the new criterion's resource name.
  my $ad_group_criteria_response =
    $api_client->AdGroupCriterionService()->mutate({
      customerId => $customer_id,
      operations => [$ad_group_criterion_operation]});

  my $ad_group_criterion_resource_name =
    $ad_group_criteria_response->{results}[0]{resourceName};
  printf "Successfully created ad group criterion with resource name '%s' " .
    "targeting user list with resource name '%s' with ad group with ID %d.\n",
    $ad_group_criterion_resource_name, $user_list_resource_name, $ad_group_id;

  return $ad_group_criterion_resource_name;
}
set_up_remarketing.pl

여러 고객 목록 타겟팅

crm_based_user_list는 다른 crm_based_user_list와만 결합할 수 있습니다. logical_user_list를 사용하는 경우 crm_based_user_list의 모든 정책은 결과로 반환되는 사용자 목록에 적용됩니다.