ターゲット設定

ターゲット設定を使用: 広告グループまたはキャンペーンで、広告を 特定のオーディエンスセグメントや 選択した特定のコンテンツに絞り込んで

ヒント: このガイドでは、ターゲティングとモニタリングの設定について説明します。目標 キャンペーンまたは広告グループのターゲティング条件を設定する方法については、 ターゲティング条件に関するガイド、 キャンペーンのターゲティング条件を追加する サンプルです。

ターゲティングを設定する

さまざまな条件タイプをターゲティングにどのように使用するかを詳細に設定できます TargetingSetting フィールドに 配列 target_restrictions。 各 TargetRestriction では、 特定のタイプの条件で bid_only のオプションであるかどうかを確認します。

bid_only を true に設定すると、ターゲット設定は次のように設定されます。 [モニタリング] を選択し、この条件はトラフィックの制限には使用されませんが、 を使用すると、リストのユーザーごとに異なる入札単価を設定できます。設定 bid_only を false に設定すると、ターゲット設定が「ターゲティング」に設定されますこれにより、 条件を指定して、広告グループのトラフィックをターゲット リストのユーザーのみに制限できます。

ベスト プラクティス

デフォルトでは bid_only は false に設定されています。つまり、ターゲティングは 「ターゲティング」に設定しますオーディエンス セグメントを検索や ショッピング キャンペーンなので、「bid_only」のターゲット設定を trueして「モニタリング」に設定します。

検索広告向けオーディエンスセグメントに 複製したキャンペーンを設定する場合は bid_only のターゲティングを false に設定したままにします。

制限事項

追加や更新はできません AdGroup での targeting_setting targeting_setting が クリックします親 Campaign に targeting_setting が設定されている場合、 まず、親 Campaign の targeting_setting を削除する必要があります。同様に 設定するには、まず AdGroup の targeting_setting を削除する必要があります Campaign にあります。

ターゲット設定を取得する

ターゲティングが意図したとおりに設定されているかを確認するには、 広告グループまたはキャンペーンにtargeting_setting ad_group.targeting_setting.target_restrictions フィールドの ad_group フィールドを取得します。

例

この例では、広告グループの targeting_setting を更新して、bid_only TargetRestriction 個のインスタンスで targeting_dimension が true AUDIENCE, 広告グループの広告が 指定したオーディエンスセグメントです

まず、すべての ad_group.targeting_setting.target_restrictions を 広告グループを選択します

Java

String searchQuery =
    "SELECT ad_group.id, ad_group.name, ad_group.targeting_setting.target_restrictions "
        + "FROM ad_group "
        + "WHERE ad_group.id = "
        + adGroupId;
UpdateAudienceTargetRestriction.java
      

C#

string query = $@"
    SELECT ad_group.id, ad_group.name, ad_group.targeting_setting.target_restrictions
    FROM ad_group
    WHERE ad_group.id = {adGroupId}";
UpdateAudienceTargetRestriction.cs
      

PHP

$query = "SELECT ad_group.id, ad_group.name, " .
    "ad_group.targeting_setting.target_restrictions " .
    "FROM ad_group " .
    "WHERE ad_group.id = $adGroupId";
UpdateAudienceTargetRestriction.php
      

Python

query = f"""
    SELECT
      ad_group.id,
      ad_group.name,
      ad_group.targeting_setting.target_restrictions
    FROM ad_group
    WHERE ad_group.id = {ad_group_id}"""
update_audience_target_restriction.py
      

Ruby

query = <<~QUERY
  SELECT ad_group.id, ad_group.name,
         ad_group.targeting_setting.target_restrictions
  FROM ad_group
  WHERE ad_group.id = #{ad_group_id}
QUERY
update_audience_target_restriction.rb
      

Perl

my $query =
  "SELECT ad_group.id, ad_group.name, " .
  "ad_group.targeting_setting.target_restrictions FROM ad_group " .
  "WHERE ad_group.id = $ad_group_id";
update_audience_target_restriction.pl
      

次に、ターゲット制限に対してループ処理を行い、 TargetingSetting オブジェクト。コードで「TargetRestriction」と targeting_dimension が AUDIENCE で bid_only の値が false の場合、 TargetRestriction オブジェクトの bid_only フィールドを true（または 「Observation」など）を指定し、TargetingSetting オブジェクトに追加します。

それ以外の場合は、サーバーから返された TargetRestriction オブジェクトを TargetingSetting。注意すべき点として、Cloud Storage バケットを TargetingSetting オブジェクト全体を Google 広告に戻します。Google は、 TargetingSetting に欠落している target_restrictions を削除する必要があります。

Java

for (TargetRestriction targetRestriction : targetRestrictions) {
  TargetingDimension targetingDimension = targetRestriction.getTargetingDimension();
  boolean bidOnly = targetRestriction.getBidOnly();
  System.out.printf(
      "- Targeting restriction with targeting dimension '%s' and bid only set to '%b'.%n",
      targetingDimension, bidOnly);
  // Adds the target restriction to the TargetingSetting object as is if the targeting
  // dimension has a value other than AUDIENCE because those should not change.
  if (!targetingDimension.equals(TargetingDimension.AUDIENCE)) {
    targetingSettingBuilder.addTargetRestrictions(targetRestriction);
  } else if (!bidOnly) {
    shouldUpdateTargetingSetting = true;
    // Adds an AUDIENCE target restriction with bid_only set to true to the targeting
    // setting object. This has the effect of setting the AUDIENCE target restriction to
    // "Observation". For more details about the targeting setting, visit
    // https://support.google.com/google-ads/answer/7365594.
    targetingSettingBuilder.addTargetRestrictions(
        TargetRestriction.newBuilder()
            .setTargetingDimensionValue(TargetingDimension.AUDIENCE_VALUE)
            .setBidOnly(true));
  }
}
UpdateAudienceTargetRestriction.java
      

C#

foreach (TargetRestriction targetRestriction in targetRestrictions)
{
    TargetingDimension targetingDimension =
        targetRestriction.TargetingDimension;
    bool bidOnly = targetRestriction.BidOnly;

    Console.WriteLine("\tTargeting restriction with targeting dimension " +
        $"'{targetingDimension}' and bid only set to '{bidOnly}'.");

    // Add the target restriction to the TargetingSetting object as is if the
    // targeting dimension has a value other than AUDIENCE because those should
    // not change.
    if (targetingDimension != TargetingDimension.Audience)
    {
        targetingSetting.TargetRestrictions.Add(targetRestriction);
    }
    else if (!bidOnly)
    {
        shouldUpdateTargetingSetting = true;

        // Add an AUDIENCE target restriction with bid_only set to true to the
        // targeting setting object. This has the effect of setting the AUDIENCE
        // target restriction to "Observation". For more details about the
        // targeting setting, visit
        // https://support.google.com/google-ads/answer/7365594.
        targetingSetting.TargetRestrictions.Add(new TargetRestriction
        {
            TargetingDimension = TargetingDimension.Audience,
            BidOnly = true
        });
    }
}
UpdateAudienceTargetRestriction.cs
      

PHP

foreach (
    $adGroup->getTargetingSetting()->getTargetRestrictions() as $targetRestriction
) {
    // Prints the results.
    $targetingDimension = $targetRestriction->getTargetingDimension();
    $bidOnly = $targetRestriction->getBidOnly();
    printf(
        "- Targeting restriction with targeting dimension '%s' and bid only set to " .
        "'%s'.%s",
        TargetingDimension::name($targetingDimension),
        $bidOnly ? 'true' : 'false',
        PHP_EOL
    );

    // Adds the target restriction to the TargetingSetting object as is if the targeting
    // dimension has a value other than AUDIENCE because those should not change.
    if ($targetingDimension !== TargetingDimension::AUDIENCE) {
        $targetRestrictions[] = $targetRestriction;
    } elseif (!$bidOnly) {
        $shouldUpdateTargetingSetting = true;

        // Adds an AUDIENCE target restriction with bid_only set to true to the
        // targeting setting object. This has the effect of setting the AUDIENCE
        // target restriction to "Observation".
        // For more details about the targeting setting, visit
        // https://support.google.com/google-ads/answer/7365594.
        $targetRestrictions[] = new TargetRestriction([
            'targeting_dimension' => TargetingDimension::AUDIENCE,
            'bid_only' => true
        ]);
    }
}
UpdateAudienceTargetRestriction.php
      

Python

for target_restriction in target_restrictions:
    targeting_dimension = target_restriction.targeting_dimension
    bid_only = target_restriction.bid_only

    print(
        "\tTargeting restriction with targeting dimension "
        f"'{targeting_dimension.name}' "
        f"and bid only set to '{bid_only}'."
    )

    # Add the target restriction to the TargetingSetting object as
    # is if the targeting dimension has a value other than audience
    # because those should not change.
    if targeting_dimension != targeting_dimension_enum.AUDIENCE:
        targeting_setting.target_restrictions.append(target_restriction)
    elif not bid_only:
        should_update_targeting_setting = True

        # Add an audience target restriction with bid_only set to
        # true to the targeting setting object. This has the effect
        # of setting the audience target restriction to
        # "Observation". For more details about the targeting
        # setting, visit
        # https://support.google.com/google-ads/answer/7365594.
        new_target_restriction = targeting_setting.target_restrictions.add()
        new_target_restriction.targeting_dimension = (
            targeting_dimension_enum.AUDIENCE
        )
        new_target_restriction.bid_only = True
update_audience_target_restriction.py
      

Ruby

ad_group.targeting_setting.target_restrictions.each do |r|
  # Prints the results.
  targeting_dimension = r.targeting_dimension
  bid_only = r.bid_only
  puts "- Targeting restriction with targeting dimension " \
    "#{targeting_dimension} and bid only set to #{bid_only}."

  # Adds the target restriction to the TargetingSetting object as is if the
  # targeting dimension has a value other than AUDIENCE because those should
  # not change.
  if targeting_dimension != :AUDIENCE
    target_restrictions << r
  elsif !bid_only
    should_update_targeting_setting = true

    # Adds an AUDIENCE target restriction with bid_only set to true to the
    # targeting setting object. This has the effect of setting the AUDIENCE
    # target restriction to "Observation".
    # For more details about the targeting setting, visit
    # https://support.google.com/google-ads/answer/7365594.
    target_restrictions << client.resource.target_restriction do |tr|
      tr.targeting_dimension = :AUDIENCE
      tr.bid_only = true
    end
  end
end
update_audience_target_restriction.rb
      

Perl

foreach my $target_restriction (@target_restrictions) {
  my $targeting_dimension = $target_restriction->{targetingDimension};

  printf
    "\tTargeting restriction with targeting dimension '%s' and bid " .
    "only set to '%s'.\n",
    $targeting_dimension,
    $target_restriction->{bidOnly} ? "TRUE" : "FALSE";

  # Add the target restriction to the TargetingSetting object as is if the
  # targeting dimension has a value other than AUDIENCE because those
  # should not change.
  if ($targeting_dimension ne AUDIENCE) {
    $target_restriction->{bidOnly} =
      $target_restriction->{bidOnly} ? "true" : "false";
    push @{$targeting_setting->{targetRestrictions}}, $target_restriction;
  } elsif (!$target_restriction->{bidOnly}) {
    $should_update_target_setting = 1;

    # Add an AUDIENCE target restriction with bid_only set to true to the
    # targeting setting object. This has the effect of setting the
    # AUDIENCE target restriction to "Observation". For more details about
    # the targeting setting, visit
    # https://support.google.com/google-ads/answer/7365594.
    my $new_restriction =
      Google::Ads::GoogleAds::V17::Common::TargetRestriction->new({
        targetingDimension => AUDIENCE,
        bidOnly            => "true"
      });
    push @{$targeting_setting->{targetRestrictions}}, $new_restriction;
  }
}
update_audience_target_restriction.pl
      

最後に、コードの更新が必要なターゲット制限に遭遇した場合、 新しいターゲット設定で広告グループを更新する。

Java

private void updateTargetingSetting(
    GoogleAdsClient googleAdsClient,
    long customerId,
    long adGroupId,
    TargetingSetting targetingSetting) {
  // Creates the ad group service client.
  try (AdGroupServiceClient adGroupServiceClient =
      googleAdsClient.getLatestVersion().createAdGroupServiceClient()) {
    // Creates an ad group object with the proper resource name and updated targeting setting.
    AdGroup adGroup =
        AdGroup.newBuilder()
            .setResourceName(ResourceNames.adGroup(customerId, adGroupId))
            .setTargetingSetting(targetingSetting)
            .build();
    // Constructs an operation that will update the ad group, using the FieldMasks utility to
    // derive the update mask. This mask tells the Google Ads API which attributes of the
    // ad group you want to change.
    AdGroupOperation operation =
        AdGroupOperation.newBuilder()
            .setUpdate(adGroup)
            .setUpdateMask(FieldMasks.allSetFieldsOf(adGroup))
            .build();
    // Sends the operation in a mutate request.
    MutateAdGroupsResponse response =
        adGroupServiceClient.mutateAdGroups(
            Long.toString(customerId), ImmutableList.of(operation));
    // Prints the resource name of the updated object.
    System.out.printf(
        "Updated targeting setting of ad group with resource name '%s'; set the AUDIENCE "
            + "target restriction to 'Observation'.%n",
        response.getResults(0).getResourceName());
  }
}
UpdateAudienceTargetRestriction.java
      

C#

private void UpdateTargetingSetting(GoogleAdsClient client, long customerId, long
    adGroupId, TargetingSetting targetingSetting)
{
    // Get the AdGroupService client.
    AdGroupServiceClient adGroupServiceClient =
        client.GetService(Services.V17.AdGroupService);

    // Create an ad group object with the updated targeting setting.
    AdGroup adGroup = new AdGroup
    {
        ResourceName = ResourceNames.AdGroup(customerId, adGroupId),
        TargetingSetting = targetingSetting
    };

    // Construct an operation that will update the ad group, using the FieldMasks utility
    // to derive the update mask. This mask tells the Google Ads API which attributes of the
    // ad group you want to change.
    AdGroupOperation operation = new AdGroupOperation
    {
        Update = adGroup,
        UpdateMask = FieldMasks.AllSetFieldsOf(adGroup)
    };

    // Send the operation in a mutate request.
    MutateAdGroupsResponse response =
        adGroupServiceClient.MutateAdGroups(customerId.ToString(), new[] { operation });
    // Print the resource name of the updated object.
    Console.WriteLine("Updated targeting setting of ad group with resource name " +
        $"'{response.Results.First().ResourceName}'; set the AUDIENCE target restriction " +
        "to 'Observation'.");
}
UpdateAudienceTargetRestriction.cs
      

PHP

private static function updateTargetingSetting(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $adGroupId,
    TargetingSetting $targetingSetting
) {
    // Creates an ad group object with the proper resource name and updated targeting setting.
    $adGroup = new AdGroup([
        'resource_name' => ResourceNames::forAdGroup($customerId, $adGroupId),
        'targeting_setting' => $targetingSetting
    ]);

    // Constructs an operation that will update the ad group with the specified resource name,
    // using the FieldMasks utility to derive the update mask. This mask tells the Google Ads
    // API which attributes of the ad group you want to change.
    $adGroupOperation = new AdGroupOperation();
    $adGroupOperation->setUpdate($adGroup);
    $adGroupOperation->setUpdateMask(FieldMasks::allSetFieldsOf($adGroup));

    // Issues a mutate request to update the ad group.
    $adGroupServiceClient = $googleAdsClient->getAdGroupServiceClient();
    $response = $adGroupServiceClient->mutateAdGroups(
        MutateAdGroupsRequest::build($customerId, [$adGroupOperation])
    );

    // Prints the resource name of the updated ad group.
    printf(
        "Updated targeting setting of ad group with resource name '%s'; set the AUDIENCE " .
        "target restriction to 'Observation'.%s",
        $response->getResults()[0]->getResourceName(),
        PHP_EOL
    );
}
UpdateAudienceTargetRestriction.php
      

Python

def update_targeting_setting(
    client, customer_id, ad_group_id, targeting_setting
):
    """Updates the given TargetingSetting of an ad group.

    Args:
        client: The Google Ads client.
        customer_id: The Google Ads customer ID.
        ad_group_id: The ad group ID for which to update the audience targeting
            restriction.
        targeting_setting: The updated targeting setting.
    """
    # Get the AdGroupService client.
    ad_group_service = client.get_service("AdGroupService")

    # Construct an operation that will update the ad group.
    ad_group_operation = client.get_type("AdGroupOperation")

    # Populate the ad group object with the updated targeting setting.
    ad_group = ad_group_operation.update
    ad_group.resource_name = ad_group_service.ad_group_path(
        customer_id, ad_group_id
    )
    ad_group.targeting_setting.target_restrictions.extend(
        targeting_setting.target_restrictions
    )
    # Use the field_mask utility to derive the update mask. This mask tells the
    # Google Ads API which attributes of the ad group you want to change.
    client.copy_from(
        ad_group_operation.update_mask,
        protobuf_helpers.field_mask(None, ad_group._pb),
    )

    # Send the operation in a mutate request and print the resource name of the
    # updated object.
    mutate_ad_groups_response = ad_group_service.mutate_ad_groups(
        customer_id=customer_id, operations=[ad_group_operation]
    )
    print(
        "Updated targeting setting of ad group with resource name "
        f"'{mutate_ad_groups_response.results[0].resource_name}'; set the "
        "audience target restriction to 'Observation'."
    )
update_audience_target_restriction.py
      

Ruby

def update_targeting_setting(
  client,
  customer_id,
  ad_group_id,
  targeting_setting)
  # Constructs an operation that will update the ad group with the specified
  # resource name.
  ad_group_resource_name = client.path.ad_group(customer_id, ad_group_id)
  operation = client.operation.update_resource.ad_group(ad_group_resource_name) do |ag|
    ag.targeting_setting = targeting_setting
  end

  # Issues a mutate request to update the ad group.
  response = client.service.ad_group.mutate_ad_groups(
    customer_id: customer_id,
    operations: [operation],
  )

  # Prints the resource name of the updated ad group.
  puts "Updated targeting setting of ad group with resource name " \
    "#{response.results.first.resource_name}; set the AUDIENCE target " \
    "restriction to 'Observation'."
end
update_audience_target_restriction.rb
      

Perl

sub update_targeting_setting {
  my ($api_client, $customer_id, $ad_group_id, $targeting_setting) = @_;

  # Construct an ad group object with the updated targeting setting.
  my $ad_group = Google::Ads::GoogleAds::V17::Resources::AdGroup->new({
      resourceName =>
        Google::Ads::GoogleAds::V17::Utils::ResourceNames::ad_group(
        $customer_id, $ad_group_id
        ),
      targetingSetting => $targeting_setting
    });

  # Create an operation that will update the ad group, using the FieldMasks
  # utility to derive the update mask. This mask tells the Google Ads API which
  # attributes of the ad group you want to change.
  my $ad_group_operation =
    Google::Ads::GoogleAds::V17::Services::AdGroupService::AdGroupOperation->
    new({
      update     => $ad_group,
      updateMask => all_set_fields_of($ad_group)});

  # Send the operation in a mutate request and print the resource name of the
  # updated resource.
  my $ad_groups_response = $api_client->AdGroupService()->mutate({
      customerId => $customer_id,
      operations => [$ad_group_operation]});

  printf "Updated targeting setting of ad group with resourceName " .
    "'%s'; set the AUDIENCE target restriction to 'Observation'.\n",
    $ad_groups_response->{results}[0]{resourceName};
}
update_audience_target_restriction.pl
      

キャンペーンの bid_only フィールドを設定する手順は、ほぼ同じです。