Alışveriş Kampanyası Oluşturma

Alışveriş reklamlarını uygulamanın ilk adımı Alışveriş kampanyası oluşturmaktır. Alışveriş kampanyaları, kullanıcıların ürünün başlık, fiyat, mağaza adı gibi resmini gösteren reklamları görmesini sağlar. Bir Alışveriş kampanyası oluştururken kampanyanın bütçesini, teklif stratejisini ve alışveriş ayarlarını belirlemeniz gerekir.

Alışveriş kampanyası oluşturabilmeniz için Google Ads hesabınızı Google Merchant Center hesabınıza bağlamanız gerekir. Hesapları bağladıktan sonra, alışveriş ayarlarını belirtirken Google Merchant Center hesap kimliğini kullanabilirsiniz.

Standart Alışveriş kampanyaları

Bu, Ürün Alışveriş reklamları oluşturmak için gereken kampanyadır. Ürün Alışveriş reklamları, sattığınız her ürün için benzersiz reklamlar oluşturmaya gerek kalmadan reklamlarınıza resim, başlık, fiyat ve mağaza ya da işletme adı eklemenize olanak tanır.

Standart Alışveriş kampanyası oluşturmak için uygulanacak adımlar aşağıda verilmiştir:

1. Kampanyanın advertising_channel_type değerini SHOPPING olarak ayarlayın.
2. Bir ShoppingSetting oluşturun, alanları ayarlayın ve ardından kampanyaya ekleyin.
3. Portföy teklifi stratejisi oluşturun veya kampanya düzeyinde teklif stratejisi belirleyin.
4. Yeni bir kampanya bütçesi oluşturun veya mevcut bir paylaşılan bütçeyi belirleyin.

Standart Alışveriş kampanyaları için ShoppingSetting aşağıdaki alanları destekler:

Gerekli

merchant_id

Reklamı yapılacak ürünleri içeren hesabın Merchant Center kimliği.

campaign_priority

Alışveriş kampanyasının önceliği. Sayısal olarak daha yüksek önceliğe sahip olan kampanyalar, düşük önceliğe sahip olanlara göre önceliklidir. İzin verilen değerler 0 ile 2 arasındadır (0 ile 2 arasında).

İsteğe bağlı

feed_label

Merchant Center'da tanımlandığı şekliyle feed etiketi için kullanılan bir dize. Bu alan, belirli bir Merchant Center feed'inden ürün seçmeniz gerektiğinde kullanılmalıdır. Belirtilmezse kampanya, Merchant Center'daki mevcut tüm feed'leri kullanır.

Kullanımdan kaldırılan sales_country kodunu daha önce iki harfli ülke kodu (XX) biçiminde kullandıysanız bunun yerine feed_label kullanılmalıdır. Daha fazla bilgi için feed etiketi destek makalesini inceleyin.

feed_label içinde ülke kodu göndermenin, reklamların o ülkede yayınlanmasını otomatik olarak etkinleştirmediğini unutmayın. İlk olarak coğrafi konum hedeflemeyi ayarlamanız gerekir.

enable_local

Yerel mağazalarda satılan ürünlerin reklamlarını bu kampanya için etkinleştirme seçeneği.

Bir teklif stratejisi aşağıdaki şekillerde ayarlanabilir:

Portföy teklifi stratejisi

Kampanyalar, reklam grupları ve anahtar kelimeler genelinde paylaşılabilen otomatik bir teklif stratejisi. BiddingStrategyService kullanılarak oluşturulur.

Kampanya teklif stratejisi

Teklif stratejisi doğrudan kampanyada ayarlanır. Buna Alışveriş kampanyalarıyla uyumlu olan otomatik teklif stratejileri de dahil olabilir.

Standart Alışveriş kampanyaları için aşağıdaki teklif stratejileri desteklenir:

Portföy teklifi stratejisi

• target_spend
• target_roas

Kampanya teklif stratejisi

Not: Alışveriş kampanyaları için Geliştirilmiş TBM kullanımdan kaldırıldı. Geliştirilmiş TBM kullanan Alışveriş kampanyaları artık Manuel tıklama başına maliyet (TBM) teklifi kullanıyormuş gibi davranmaktadır. Bu durum, manual_cpc geliştirilmiş TBM etkin teklif stratejisini etkiler.

• manual_cpc
• target_spend
• target_roas

Ağ ayarları

Standart Alışveriş kampanyaları 28 Şubat 2022 haftasından itibaren network_settings.target_content_network alanını desteklememektedir.

Bir değiştirme isteğinde standart Alışveriş kampanyasında bu alanın true olarak ayarlanması CANNOT_TARGET_CONTENT_NETWORK hatasına neden olur.

Daha fazla bilgi için Google Ads Standart Alışveriş Kampanyaları için Ağ Ayarlarında Yapılan Değişiklikler bölümünü inceleyin.

Bu kod örneğinde, standart Alışveriş kampanyasının nasıl oluşturulacağı gösterilmektedir.

Java

private String addStandardShoppingCampaign(
    GoogleAdsClient googleAdsClient,
    long customerId,
    String budgetResourceName,
    long merchantCenterAccountId) {

  // Configures the shopping settings.
  ShoppingSetting shoppingSetting =
      ShoppingSetting.newBuilder()
          // Sets the priority of the campaign. Higher numbers take priority over lower numbers.
          // For Shopping product ad campaigns, allowed values are between 0 and 2, inclusive.
          .setCampaignPriority(0)
          .setMerchantId(merchantCenterAccountId)
          // Enables local inventory ads for this campaign.
          .setEnableLocal(true)
          .build();

  // Create the standard shopping campaign.
  Campaign campaign =
      Campaign.newBuilder()
          .setName("Interplanetary Cruise #" + getPrintableDateTime())
          // Configures settings related to shopping campaigns including advertising channel type
          // and shopping setting.
          .setAdvertisingChannelType(AdvertisingChannelType.SHOPPING)
          .setShoppingSetting(shoppingSetting)
          // Recommendation: Sets the campaign to PAUSED when creating it to prevent
          // the ads from immediately serving. Set to ENABLED once you've added
          // targeting and the ads are ready to serve.
          .setStatus(CampaignStatus.PAUSED)
          // Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for standard
          // Shopping campaigns is deprecated. If eCPC is set to true, Google Ads ignores the
          // setting and behaves as if the setting was false. See this blog post for more
          // information:
          // https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
          // Recommendation: Use one of the automated bidding strategies for Shopping campaigns
          // to help you optimize your advertising spend. More information can be found here:
          // https://support.google.com/google-ads/answer/6309029.
          .setManualCpc(ManualCpc.newBuilder().setEnhancedCpcEnabled(false).build())
          // Sets the budget.
          .setCampaignBudget(budgetResourceName)
          .build();

  // Creates a campaign operation.
  CampaignOperation operation = CampaignOperation.newBuilder().setCreate(campaign).build();

  // Issues a mutate request to add the campaign.
  try (CampaignServiceClient campaignServiceClient =
      googleAdsClient.getLatestVersion().createCampaignServiceClient()) {
    MutateCampaignsResponse response =
        campaignServiceClient.mutateCampaigns(
            Long.toString(customerId), Collections.singletonList(operation));
    MutateCampaignResult result = response.getResults(0);
    System.out.printf(
        "Added a standard shopping campaign with resource name: '%s'%n",
        result.getResourceName());
    return result.getResourceName();
  }
}
AddShoppingProductAd.java
      

C#

private string AddStandardShoppingCampaign(GoogleAdsClient client, long customerId,
    string budgetResourceName, long merchantCenterAccountId)
{
    // Get the CampaignService.
    CampaignServiceClient campaignService =
        client.GetService(Services.V17.CampaignService);

    // Configures the shopping settings.
    ShoppingSetting shoppingSetting = new ShoppingSetting()
    {
        // Sets the priority of the campaign. Higher numbers take priority over lower
        // numbers. For Shopping Product Ad campaigns, allowed values are between 0 and 2,
        // inclusive.
        CampaignPriority = 0,

        MerchantId = merchantCenterAccountId,

        // Enables local inventory ads for this campaign.
        EnableLocal = true
    };

    // Create the standard shopping campaign.
    Campaign campaign = new Campaign()
    {
        Name = "Interplanetary Cruise #" + ExampleUtilities.GetRandomString(),

        // Configures settings related to shopping campaigns including advertising channel
        // type and shopping setting.
        AdvertisingChannelType = AdvertisingChannelType.Shopping,

        ShoppingSetting = shoppingSetting,

        // Recommendation: Set the campaign to PAUSED when creating it to prevent
        // the ads from immediately serving. Set to ENABLED once you've added
        // targeting and the ads are ready to serve
        Status = CampaignStatus.Paused,

        // Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for standard
        // Shopping campaigns is deprecated. If eCPC is set to true, Google Ads ignores the
        // setting and behaves as if the setting was false. See this blog post for more
        // information:
        // https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
        // Recommendation: Use one of the automated bidding strategies for Shopping
        // campaigns to help you optimize your advertising spend. More information can be
        // found here: https://support.google.com/google-ads/answer/6309029
        ManualCpc = new ManualCpc()
        {
            EnhancedCpcEnabled = false
        },

        // Sets the budget.
        CampaignBudget = budgetResourceName
    };

    // Creates a campaign operation.
    CampaignOperation operation = new CampaignOperation()
    {
        Create = campaign
    };

    // Issues a mutate request to add the campaign.
    MutateCampaignsResponse response =
        campaignService.MutateCampaigns(customerId.ToString(),
            new CampaignOperation[] { operation });
    MutateCampaignResult result = response.Results[0];
    Console.WriteLine("Added a standard shopping campaign with resource name: '{0}'.",
        result.ResourceName);
    return result.ResourceName;
}
AddShoppingProductAd.cs
      

PHP

private static function addStandardShoppingCampaign(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    string $budgetResourceName,
    int $merchantCenterAccountId
) {
    // Creates a standard shopping campaign.
    $campaign = new Campaign([
        'name' => 'Interplanetary Cruise Campaign #' . Helper::getPrintableDatetime(),
        // Configures settings related to shopping campaigns including advertising channel type
        // and shopping setting.
        'advertising_channel_type' => AdvertisingChannelType::SHOPPING,
        // Configures the shopping settings.
        'shopping_setting' => new ShoppingSetting([
            // Sets the priority of the campaign. Higher numbers take priority over lower
            // numbers. For Shopping product ad campaigns, allowed values are between 0 and 2,
            // inclusive.
            'campaign_priority' => 0,
            'merchant_id' => $merchantCenterAccountId,
            // Enables local inventory ads for this campaign
            'enable_local' => true
        ]),
        // Recommendation: Set the campaign to PAUSED when creating it to prevent
        // the ads from immediately serving. Set to ENABLED once you've added
        // targeting and the ads are ready to serve.
        'status' => CampaignStatus::PAUSED,
        // Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for standard
        // Shopping campaigns is deprecated. If eCPC is set to true, Google Ads ignores the
        // setting and behaves as if the setting was false. See this blog post for more
        // information:
        // https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
        // Recommendation: Use one of the automated bidding strategies for Shopping campaigns
        // to help you optimize your advertising spend. More information can be found here:
        // https://support.google.com/google-ads/answer/6309029.
        'manual_cpc' => new ManualCpc(['enhanced_cpc_enabled' => false]),
        // Sets the budget.
        'campaign_budget' => $budgetResourceName
    ]);

    // Creates a campaign operation.
    $campaignOperation = new CampaignOperation();
    $campaignOperation->setCreate($campaign);

    // Issues a mutate request to add campaigns.
    $campaignServiceClient = $googleAdsClient->getCampaignServiceClient();
    $response = $campaignServiceClient->mutateCampaigns(
        MutateCampaignsRequest::build($customerId, [$campaignOperation])
    );

    /** @var Campaign $addedCampaign */
    $addedCampaign = $response->getResults()[0];
    printf(
        "Added a standard shopping campaign with resource name '%s'.%s",
        $addedCampaign->getResourceName(),
        PHP_EOL
    );

    return $addedCampaign->getResourceName();
}
AddShoppingProductAd.php
      

Python

def add_standard_shopping_campaign(
    client, customer_id, budget_resource_name, merchant_center_account_id
):
    """Creates a new standard shopping campaign in the specified client account."""
    campaign_service = client.get_service("CampaignService")

    # Create standard shopping campaign.
    campaign_operation = client.get_type("CampaignOperation")
    campaign = campaign_operation.create
    campaign.name = f"Interplanetary Cruise Campaign {uuid.uuid4()}"

    # Configures settings related to shopping campaigns including advertising
    # channel type and shopping setting.
    campaign.advertising_channel_type = (
        client.enums.AdvertisingChannelTypeEnum.SHOPPING
    )
    campaign.shopping_setting.merchant_id = merchant_center_account_id

    # Sets the priority of the campaign. Higher numbers take priority over lower
    # numbers. For standard shopping campaigns, allowed values are between 0 and
    # 2, inclusive.
    campaign.shopping_setting.campaign_priority = 0

    # Enables local inventory ads for this campaign.
    campaign.shopping_setting.enable_local = True

    # Recommendation: Set the campaign to PAUSED when creating it to prevent the
    # ads from immediately serving. Set to ENABLED once you've added targeting
    # and the ads are ready to serve.
    campaign.status = client.enums.CampaignStatusEnum.PAUSED

    # Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for
    # standard Shopping campaigns is deprecated. If eCPC is set to true, Google
    # Ads ignores the setting and behaves as if the setting was false. See this
    # blog post for more information:
    # https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
    # Recommendation: Use one of the automated bidding strategies for Shopping
    # campaigns to help you optimize your advertising spend. More information
    # can be found here: https://support.google.com/google-ads/answer/6309029
    campaign.manual_cpc.enhanced_cpc_enabled = False

    # Sets the budget.
    campaign.campaign_budget = budget_resource_name

    # Add the campaign.
    campaign_response = campaign_service.mutate_campaigns(
        customer_id=customer_id, operations=[campaign_operation]
    )

    campaign_resource_name = campaign_response.results[0].resource_name

    print(
        "Added a standard shopping campaign with resource name "
        f"'{campaign_resource_name}'."
    )

    return campaign_resource_name
add_shopping_product_ad.py
      

Ruby

def add_standard_shopping_campaign(
    client, customer_id, budget_name, merchant_center_id)

  operation = client.operation.create_resource.campaign do |campaign|
    campaign.name = "Interplanetary Cruise Campaign ##{(Time.new.to_f * 1000).to_i}"

    # Shopping campaign specific settings
    campaign.advertising_channel_type = :SHOPPING

    campaign.shopping_setting = client.resource.shopping_setting do |shopping_setting|
      shopping_setting.merchant_id = merchant_center_id
      shopping_setting.campaign_priority = 0
      shopping_setting.enable_local = true
    end

    campaign.status = :PAUSED

    # Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for standard
    # Shopping campaigns is deprecated. If eCPC is set to true, Google Ads ignores the
    # setting and behaves as if the setting was false. See this blog post for more
    # information:
    # https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
    campaign.manual_cpc = client.resource.manual_cpc do |manual_cpc|
      manual_cpc.enhanced_cpc_enabled = false
    end

    campaign.campaign_budget = budget_name
  end

  service = client.service.campaign
  response = service.mutate_campaigns(
    customer_id: customer_id,
    operations: [operation],
  )

  campaign_name = response.results.first.resource_name

  puts "Added a standard shopping campaign with resource name #{campaign_name}."

  campaign_name
end
add_shopping_product_ad.rb
      

Perl

sub add_standard_shopping_campaign {
  my ($api_client, $customer_id, $budget_resource_name,
    $merchant_center_account_id)
    = @_;

  # Create a standard shopping campaign.
  my $campaign = Google::Ads::GoogleAds::V17::Resources::Campaign->new({
      name => "Interplanetary Cruise Campaign #" . uniqid(),
      # Configure settings related to shopping campaigns including advertising
      # channel type and shopping setting.
      advertisingChannelType => SHOPPING,
      shoppingSetting        =>
        Google::Ads::GoogleAds::V17::Resources::ShoppingSetting->new({
          merchantId => $merchant_center_account_id,
          # Set the priority of the campaign. Higher numbers take priority over
          # lower numbers. For standard shopping campaigns, allowed values are
          # between 0 and 2, inclusive.
          campaignPriority => 0,
          # Enable local inventory ads for this campaign.
          enableLocal => "true"
        }
        ),
      # Recommendation: Set the campaign to PAUSED when creating it to prevent
      # the ads from immediately serving. Set to ENABLED once you've added
      # targeting and the ads are ready to serve.
      status => Google::Ads::GoogleAds::V17::Enums::CampaignStatusEnum::PAUSED,
      # Set the bidding strategy to Manual CPC (with eCPC disabled). eCPC for
      # standard Shopping campaigns is deprecated. If eCPC is set to true,
      # Google Ads ignores the setting and behaves as if the setting was false.
      # See this blog post for more information:
      # https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
      # Recommendation: Use one of the automated bidding strategies for shopping
      # campaigns to help you optimize your advertising spend. More information
      # can be found here: https://support.google.com/google-ads/answer/6309029.
      manualCpc => Google::Ads::GoogleAds::V17::Common::ManualCpc->new(
        {enhancedCpcEnabled => "false"}
      ),
      # Set the budget.
      campaignBudget => $budget_resource_name
    });

  # Create a campaign operation.
  my $campaign_operation =
    Google::Ads::GoogleAds::V17::Services::CampaignService::CampaignOperation->
    new({create => $campaign});

  # Add the campaign.
  my $campaign_resource_name = $api_client->CampaignService()->mutate({
      customerId => $customer_id,
      operations => [$campaign_operation]})->{results}[0]{resourceName};

  printf "Added a standard shopping campaign with resource name: '%s'.\n",
    $campaign_resource_name;

  return $campaign_resource_name;
}
add_shopping_product_ad.pl
      

Akıllı Alışveriş kampanyaları

Önemli: Akıllı Alışveriş kampanyaları, Maksimum Performans kampanyalarına yükseltiliyor. Daha fazla bilgi için Maksimum Performans'a yükseltilen Akıllı Alışveriş kampanyaları ve yerel kampanyalar başlıklı makaleyi inceleyin.