開始使用目標客戶比對

「目標客戶比對」可讓您運用線上和離線資料觸及客戶，或再次與他們搭上線 在 Google 搜尋、「購物」分頁、Gmail、YouTube 及 多媒體廣告。使用客戶與您分享的資訊 (客戶) 為廣告指定向這些客戶和其他類似客群放送廣告。你可以 大量上傳客戶關係管理 (CRM) 資料、附加或移除資料 還是運用這些使用者清單 logical_user_list。

查看目標對像管理 簡介 以便列出各種目標對象區隔類型，以便與 其他的使用者名單選項。

進一步瞭解客戶 比對和目標對象 指定目標

必要條件

並非所有帳戶都能使用目標客戶比對。如要使用目標顧客比對功能，請 帳戶必須符合下列條件：

  • 政策遵循記錄良好
  • 付款記錄良好

視帳戶需求而定，可用的功能會不太一樣 廣告。請參閱目標顧客比對 資格政策 規定和限制

設計整合功能

使用流程

以下是建立及指定客戶名單的建議流程：

  1. 建立空白的客戶名單。

  2. 建立 OfflineUserDataJob。是 比建立單一大型工作更有效率 小工作

    從 Google Ads API v15 版開始，您應填入資料 consent 欄位 /customer_match_user_list_metadata 在 OfflineUserDataJob 中 create 要求。如果是「remove」請求，則不需要取得同意聲明。API return OfflineUserDataJobError.CUSTOMER_NOT_ACCEPTED_CUSTOMER_DATA_TERMS敬上 前提是工作的 consent.ad_user_data 或 consent.ad_personalization 至 DENIED。

    如果使用者拒絕了同意聲明，您可以建立工作，其中包含 執行 remove 作業，會從使用者清單中移除使用者 ID。

    如果您缺少特定使用者的同意聲明，請另外建立一個工作，並將該工作放在下列位置： 您需要設定工作的 consent 欄位 customer_match_user_list_metadata，然後為這些使用者新增 ID 並使用 create 作業來執行該獨立工作

  3. 使用 OfflineUserDataJobService.AddOfflineUserDataJobOperations敬上 方法。建議您在單次呼叫中加入最多 10,000 個 ID 以獲得最佳處理效能單一 AddOfflineUserDataJobOperations 要求 可包含最多 100,000 個 ID UserData 物件。

    舉例來說，如果每個 UserData 物件都有一個 UserIdentifier hashed_email 和其他 UserIdentifier 的 hashed_phone_number，之後 每個要求傳送 5,000 個 UserData 物件是最佳選擇，因為每次要求 共有 1 萬個使用者 ID

  4. 重複上述步驟，直到新增所有作業或工作完成為止 作業。且單一命名空間中的作業數量沒有限制 則單一工作；不過，建議每個工作不要超過 1,000,000 項作業 以獲得最佳處理效能

  5. 執行工作。

  6. 意見調查是否成功上傳。

  7. 驗證媒合率。

  8. 指定名單。

離線 UserDataJobService 和 UserDataService

上傳目標顧客比對資料的方式有兩種。選取 不同服務，因為服務可能設有限制。

目標客戶比對資料上傳服務
OfflineUserDataJobService (建議) 大多數開發人員都使用這項服務，適合含有 處理完並傳回成功指標本指南 主要著重於這項服務
UserDataService 這項服務經過最佳化調整，一次只能上傳少量 ID 偶爾更新，且未經過最佳化調整以持續運作。有上限 每個要求 10 項作業。此外，一項請求不得包含更多 總計超過 100 個項目 user_identifiers。

上傳指引 請參閱指南 以管理目標顧客比對整合。

自第 15 版起 Google Ads API，您應在 consent敬上 以下欄位： customer_match_user_list_metadata。 在您的 UploadUserDataRequest create 要求。如果是「remove」請求，則不需要取得同意聲明。 API 會傳回 received_operations_count敬上 設為 0 表示如果 consent.ad_user_data 或 consent.ad_personalization 為 DENIED。如果 ID 同意 DENIED， 您就可以使用 UploadUserDataRequest 的 remove 作業。

最佳做法

設計目標客戶比對時，請謹記下列最佳做法 整合：

  • 請勿試圖使用多個帳戶修改一份使用者名單，使用者 名單只能由 Google Ads 或資料 合作夥伴帳戶 建立了這個檔案。

  • 盡量增加個別 AddOfflineUserDataJobOperationsRequest，最多 100,000 個 ID，到 避開 RESOURCE_EXHAUSTED 發生錯誤。

  • 請勿在同一處使用 create 和 remove 作業 OfflineUserDataJob。這麼做可以 會產生 CONFLICTING_OPERATION敬上 錯誤。

  • 在以下位置啟用 partial_failure： AddOfflineUserDataJobOperationsRequest 以便在執行工作前偵測出有問題的作業。 作業會在模型上傳至 OfflineUserDataJob。

  • 避免同時放送多個 OfflineUserDataJob 會處理 會修改同一份使用者名單 (亦即同時擁有多項工作， CustomerMatchUserListMetadata.user_list。 指向相同的資源名稱)。這麼做可能導致 CONCURRENT_MODIFICATION敬上 錯誤，因為系統不允許在 如果您嘗試同時嘗試 請透過 Google Ads UI 和 Google Ads API 修改清單。請注意，這並不 套用至 執行作業 PENDING 工作，在工作開始之前隨時都可以完成。

  • 如要套用數千項作業，請建立一項 OfflineUserDataJob 包含所有作業。不要建立多個 每個工作只有幾百個作業，並依序執行，或 。對所有作業而言，單一大型工作就遠不及了 比多個小型工作更有效率， 工作流程中發生錯誤。

若要瞭解如何運用顧客名單找出最佳指定目標，請參閱： 說明中心。

建立顧客名單

首先，請使用 UserListService。建立顧客名單 方法是設定 crm_based_user_list 欄位， user_list 物件。可在廣告活動類型上設定「crm_based_user_list」欄位 支援指定顧客名單：

各種廣告活動類型中的目標客戶比對
搜尋聯播網 廣告會顯示在搜尋聯播網上。
多媒體廣告聯播網 廣告只會顯示在多媒體廣告聯播網和 Gmail 中 廣告素材。
採用多媒體廣告聯播網 (搜尋廣告活動) 只有在沒有 Gmail 服務供應商的情況下，廣告才會顯示在搜尋聯播網和 Gmail 中 廣告素材。
影片廣告活動 廣告必須包含 TrueView 串流內廣告，才能在 YouTube 上顯示。
購物廣告活動 廣告會顯示在「購物」分頁中。

crm_based_user_list 包含三個欄位：

  • app_id：此字串是用來識別其來源的行動應用程式 收集到的資料為以下項目建立CrmBasedUserList時，必填 上傳行動廣告編號

  • upload_key_type: 清單的比對鍵類型，可以是 CONTACT_INFO、CRM_ID 或 MOBILE_ADVERTISING_ID。一份清單不得包含混合資料類型。 所有客戶名單都必須填寫這個欄位。

  • data_source_type: 清單的資料來源。預設值為 FIRST_PARTY。已加入許可清單 客戶可以建立第三方來源的顧客名單。

membership_life_span 屬性可讓您定義時間範圍 (以天為單位)， 系統會將該使用者加入名單。使用客戶名單類型 membership_life_span 至 10,000 表示沒有到期日。

membership_status 屬性 定義清單是否接受新使用者。

建立顧客名單的程式碼範例

Java

private String createCustomerMatchUserList(GoogleAdsClient googleAdsClient, long customerId) {
  // Creates the new user list.
  UserList userList =
      UserList.newBuilder()
          .setName("Customer Match list #" + getPrintableDateTime())
          .setDescription("A list of customers that originated from email addresses")
          // Customer Match user lists can use a membership life span of 10,000 to indicate
          // unlimited; otherwise normal values apply.
          // Sets the membership life span to 30 days.
          .setMembershipLifeSpan(30)
          // Sets the upload key type to indicate the type of identifier that will be used to
          // add users to the list. This field is immutable and required for a CREATE operation.
          .setCrmBasedUserList(
              CrmBasedUserListInfo.newBuilder()
                  .setUploadKeyType(CustomerMatchUploadKeyType.CONTACT_INFO))
          .build();

  // Creates the operation.
  UserListOperation operation = UserListOperation.newBuilder().setCreate(userList).build();

  // Creates the service client.
  try (UserListServiceClient userListServiceClient =
      googleAdsClient.getLatestVersion().createUserListServiceClient()) {
    // Adds the user list.
    MutateUserListsResponse response =
        userListServiceClient.mutateUserLists(
            Long.toString(customerId), ImmutableList.of(operation));
    // Prints the response.
    System.out.printf(
        "Created Customer Match user list with resource name: %s.%n",
        response.getResults(0).getResourceName());
    return response.getResults(0).getResourceName();
  }
}

AddCustomerMatchUserList.java

C#

private string CreateCustomerMatchUserList(GoogleAdsClient client, long customerId)
{
    // Get the UserListService.
    UserListServiceClient service = client.GetService(Services.V17.UserListService);

    // Creates the user list.
    UserList userList = new UserList()
    {
        Name = $"Customer Match list# {ExampleUtilities.GetShortRandomString()}",
        Description = "A list of customers that originated from email and physical" +
            " addresses",
        // Customer Match user lists can use a membership life span of 10000 to
        // indicate unlimited; otherwise normal values apply.
        // Sets the membership life span to 30 days.
        MembershipLifeSpan = 30,
        CrmBasedUserList = new CrmBasedUserListInfo()
        {
            UploadKeyType = CustomerMatchUploadKeyType.ContactInfo
        }
    };
    // Creates the user list operation.
    UserListOperation operation = new UserListOperation()
    {
        Create = userList
    };

    // Issues a mutate request to add the user list and prints some information.
    MutateUserListsResponse response = service.MutateUserLists(
        customerId.ToString(), new[] { operation });
    string userListResourceName = response.Results[0].ResourceName;
    Console.WriteLine($"User list with resource name '{userListResourceName}' " +
        $"was created.");
    return userListResourceName;
}
AddCustomerMatchUserList.cs

PHP

private static function createCustomerMatchUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId
): string {
    // Creates the user list.
    $userList = new UserList([
        'name' => 'Customer Match list #' . Helper::getPrintableDatetime(),
        'description' => 'A list of customers that originated from email '
            . 'and physical addresses',
        // Customer Match user lists can use a membership life span of 10000 to
        // indicate unlimited; otherwise normal values apply.
        // Sets the membership life span to 30 days.
        'membership_life_span' => 30,
        'crm_based_user_list' => new CrmBasedUserListInfo([
            // Sets the upload key type to indicate the type of identifier that will be used to
            // add users to the list. This field is immutable and required for a CREATE
            // operation.
            'upload_key_type' => CustomerMatchUploadKeyType::CONTACT_INFO
        ])
    ]);

    // Creates the user list operation.
    $operation = new UserListOperation();
    $operation->setCreate($userList);

    // Issues a mutate request to add the user list and prints some information.
    $userListServiceClient = $googleAdsClient->getUserListServiceClient();
    $response = $userListServiceClient->mutateUserLists(
        MutateUserListsRequest::build($customerId, [$operation])
    );
    $userListResourceName = $response->getResults()[0]->getResourceName();
    printf("User list with resource name '%s' was created.%s", $userListResourceName, PHP_EOL);

    return $userListResourceName;
}
AddCustomerMatchUserList.php

Python

def create_customer_match_user_list(client, customer_id):
    """Creates a Customer Match user list.

    Args:
        client: The Google Ads client.
        customer_id: The ID for the customer that owns the user list.

    Returns:
        The string resource name of the newly created user list.
    """
    # Creates the UserListService client.
    user_list_service_client = client.get_service("UserListService")

    # Creates the user list operation.
    user_list_operation = client.get_type("UserListOperation")

    # Creates the new user list.
    user_list = user_list_operation.create
    user_list.name = f"Customer Match list #{uuid.uuid4()}"
    user_list.description = (
        "A list of customers that originated from email and physical addresses"
    )
    # Sets the upload key type to indicate the type of identifier that is used
    # to add users to the list. This field is immutable and required for a
    # CREATE operation.
    user_list.crm_based_user_list.upload_key_type = (
        client.enums.CustomerMatchUploadKeyTypeEnum.CONTACT_INFO
    )
    # Customer Match user lists can set an unlimited membership life span;
    # to do so, use the special life span value 10000. Otherwise, membership
    # life span must be between 0 and 540 days inclusive. See:
    # https://developers.devsite.corp.google.com/google-ads/api/reference/rpc/latest/UserList#membership_life_span
    # Sets the membership life span to 30 days.
    user_list.membership_life_span = 30

    response = user_list_service_client.mutate_user_lists(
        customer_id=customer_id, operations=[user_list_operation]
    )
    user_list_resource_name = response.results[0].resource_name
    print(
        f"User list with resource name '{user_list_resource_name}' was created."
    )

    return user_list_resource_name
add_customer_match_user_list.py

小茹

def create_customer_match_user_list(client, customer_id)
  # Creates the user list.
  operation = client.operation.create_resource.user_list do |ul|
    ul.name = "Customer Match List #{(Time.new.to_f * 1000).to_i}"
    ul.description = "A list of customers that originated from email and " \
      "physical addresses"
    # Customer Match user lists can use a membership life span of 10000 to
    # indicate unlimited; otherwise normal values apply.
    # Sets the membership life span to 30 days.
    ul.membership_life_span = 30
    ul.crm_based_user_list = client.resource.crm_based_user_list_info do |crm|
      crm.upload_key_type = :CONTACT_INFO
    end
  end

  # Issues a mutate request to add the user list and prints some information.
  response = client.service.user_list.mutate_user_lists(
    customer_id: customer_id,
    operations: [operation],
  )

  # Prints out some information about the newly created user list.
  resource_name = response.results.first.resource_name
  puts "User list with resource name #{resource_name} was created."

  resource_name
end
add_customer_match_user_list.rb

Perl

sub create_customer_match_user_list {
  my ($api_client, $customer_id) = @_;

  # Create the user list.
  my $user_list = Google::Ads::GoogleAds::V17::Resources::UserList->new({
      name        => "Customer Match list #" . uniqid(),
      description =>
        "A list of customers that originated from email and physical addresses",
      # Customer Match user lists can use a membership life span of 10000 to
      # indicate unlimited; otherwise normal values apply.
      # Set the membership life span to 30 days.
      membershipLifeSpan => 30,
      # Set the upload key type to indicate the type of identifier that will be
      # used to add users to the list. This field is immutable and required for
      # a CREATE operation.
      crmBasedUserList =>
        Google::Ads::GoogleAds::V17::Common::CrmBasedUserListInfo->new({
          uploadKeyType => CONTACT_INFO
        })});

  # Create the user list operation.
  my $user_list_operation =
    Google::Ads::GoogleAds::V17::Services::UserListService::UserListOperation->
    new({
      create => $user_list
    });

  # Issue a mutate request to add the user list and print some information.
  my $user_lists_response = $api_client->UserListService()->mutate({
      customerId => $customer_id,
      operations => [$user_list_operation]});
  my $user_list_resource_name =
    $user_lists_response->{results}[0]{resourceName};
  printf "User list with resource name '%s' was created.\n",
    $user_list_resource_name;

  return $user_list_resource_name;
}
add_customer_match_user_list.pl

新增顧客數位資料

電子郵件地址、郵寄地址和電話等三種主要比對鍵 號碼。您可以使用 User-ID 和行動裝置 ID 做為比對鍵，但這些 解決方案對 Cookie 和裝置的依賴程度降低，無法因應未來趨勢 編號。我們建議您上傳使用者聯絡資訊，例如電子郵件地址 郵寄地址和電話號碼。盡可能避免使用客戶關係管理或行動裝置 而非客戶 ID

每份使用者名單只能包含一種客戶資料， 這個 CrmBasedUserListInfo.upload_key_type敬上 ] 欄位。此外，UserData 物件， 代表單一使用者，最多可包含 20 個使用者 ID 有專屬的 UserIdentifier 物件超過 20 個 ID 會導致 TOO_MANY_USER_IDENTIFIERS敬上 錯誤。

Google Ads 只會使用符合「目標客戶比對」使用者名單的指定目標來指定目標 放送廣告時活躍使用者的最低活躍使用者人數門檻；活躍使用者為 Gmail、Google 搜尋、YouTube 或 多媒體廣告。上傳至少 5,000 名成員，提高授課人數的機會 相符的活躍使用者來指定目標

上傳使用者聯絡資訊

如要上傳使用者電子郵件地址、郵寄地址或電話號碼，請設定 upload_key_type到 CONTACT_INFO。請注意，聯絡資訊請務必 必須與 Google 帳戶建立關聯，以便比對成功。 帳戶，例如 Google Workspace。

適用於隱私權疑慮、電子郵件地址、名字、姓氏和電話號碼 數字必須使用 SHA-256 演算法進行雜湊處理，才能上傳。於 先將雜湊結果標準化，再對其中一個值進行雜湊處理， 請務必執行下列工作：

  • 移除開頭和結尾的空白字元。
  • 針對姓名、電子郵件地址和郵寄地址：將文字轉換為小寫。
  • 電話號碼：將每個電話號碼轉換為 E164 格式，再進行雜湊處理。這種格式代表 數字為以 + 開頭的數字，最多 15 位數 符號，例如 +12125650000 或 +442070313000。+領先 符號。

您不必移除電子郵件地址前面的所有半形句號 (.)， 擁有 gmail.com 和 googlemail.com 個電子郵件地址的網域名稱 仍接受。

如果聯絡資訊在進行雜湊處理前的格式不正確，API 仍可接受經過雜湊處理的資訊，但無法與客戶配對。

如果您想要上傳郵寄地址資料，您至少必須包含：

  • 國家/地區代碼
  • 郵遞區號
  • 已雜湊的名字
  • 已雜湊的姓氏

如果缺少任何一個欄位，地址就無法配對。

雖然客戶名單只能包含一種upload_key_type，但有多種類型 可以上傳CONTACT_INFO的upload_key_type聯絡資訊。 如要提高媒合率，建議您採取這種做法。

上傳客戶關係管理 ID

如要在顧客名單中填入客戶關係管理 ID，請將 upload_key_type 設為 CRM_ID。 客戶關係管理 ID 是根據廣告主產生並指派的使用者 ID 進行比對。 這與上傳 MOBILE_ADVERTISING_ID 個執行個體類似，但您必須上傳 填入 UserIdentifier 物件的 third_party_user_id 欄位。

上傳行動 ID

與電子郵件進行目標客戶比對類似，您可以使用 廣告識別碼 (IDFA) 或 Google 廣告 ID (AAID) 行動裝置 而非客戶 ID方法是指定 app_id 資源並將 upload_key_type 設為 MOBILE_ADVERTISING_ID 才能利用使用者名單與行動裝置 ID 進行比對。

程式碼範例

以下範例使用 OfflineUserDataJobOperation 附加客戶 自己的聯絡資訊加進客戶清單。

Java

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys "email",
// "phone", "firstName", "lastName", "countryCode", and "postalCode". In your application, this
// data might come from a file or a database.
List<Map<String, String>> rawRecords = new ArrayList<>();
// The first user data has an email address and a phone number.
Map<String, String> rawRecord1 =
    ImmutableMap.<String, String>builder()
        .put("email", "dana@example.com")
        // Phone number to be converted to E.164 format, with a leading '+' as required. This
        // includes whitespace that will be removed later.
        .put("phone", "+1 800 5550101")
        .build();
// The second user data has an email address, a mailing address, and a phone number.
Map<String, String> rawRecord2 =
    ImmutableMap.<String, String>builder()
        // Email address that includes a period (.) before the domain.
        .put("email", "alex.2@example.com")
        // Address that includes all four required elements: first name, last name, country
        // code, and postal code.
        .put("firstName", "Alex")
        .put("lastName", "Quinn")
        .put("countryCode", "US")
        .put("postalCode", "94045")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        .build();
// The third user data only has an email address.
Map<String, String> rawRecord3 =
    ImmutableMap.<String, String>builder().put("email", "charlie@example.com").build();
// Adds the raw records to the raw input list.
rawRecords.add(rawRecord1);
rawRecords.add(rawRecord2);
rawRecords.add(rawRecord3);

// Iterates over the raw input list and creates a UserData object for each record.
List<UserData> userDataList = new ArrayList<>();
for (Map<String, String> rawRecord : rawRecords) {
  // Creates a builder for the UserData object that represents a member of the user list.
  UserData.Builder userDataBuilder = UserData.newBuilder();
  // Checks if the record has email, phone, or address information, and adds a SEPARATE
  // UserIdentifier object for each one found. For example, a record with an email address and a
  // phone number will result in a UserData with two UserIdentifiers.

  // IMPORTANT: Since the identifier attribute of UserIdentifier
  // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
  // oneof
  // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
  // hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
  // than one of these attributes on the same UserIdentifier will clear all the other members
  // of the oneof. For example, the following code is INCORRECT and will result in a
  // UserIdentifier with ONLY a hashedPhoneNumber.
  //
  // UserIdentifier incorrectlyPopulatedUserIdentifier =
  //     UserIdentifier.newBuilder()
  //         .setHashedEmail("...")
  //         .setHashedPhoneNumber("...")
  //         .build();
  //
  // The separate 'if' statements below demonstrate the correct approach for creating a UserData
  // for a member with multiple UserIdentifiers.

  // Checks if the record has an email address, and if so, adds a UserIdentifier for it.
  if (rawRecord.containsKey("email")) {
    UserIdentifier hashedEmailIdentifier =
        UserIdentifier.newBuilder()
            .setHashedEmail(normalizeAndHash(sha256Digest, rawRecord.get("email"), true))
            .build();
    // Adds the hashed email identifier to the UserData object's list.
    userDataBuilder.addUserIdentifiers(hashedEmailIdentifier);
  }

  // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
  if (rawRecord.containsKey("phone")) {
    UserIdentifier hashedPhoneNumberIdentifier =
        UserIdentifier.newBuilder()
            .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone"), true))
            .build();
    // Adds the hashed phone number identifier to the UserData object's list.
    userDataBuilder.addUserIdentifiers(hashedPhoneNumberIdentifier);
  }

  // Checks if the record has all the required mailing address elements, and if so, adds a
  // UserIdentifier for the mailing address.
  if (rawRecord.containsKey("firstName")) {
    // Checks if the record contains all the other required elements of a mailing address.
    Set<String> missingAddressKeys = new HashSet<>();
    for (String addressKey : new String[] {"lastName", "countryCode", "postalCode"}) {
      if (!rawRecord.containsKey(addressKey)) {
        missingAddressKeys.add(addressKey);
      }
    }

    if (!missingAddressKeys.isEmpty()) {
      System.out.printf(
          "Skipping addition of mailing address information because the following required keys"
              + " are missing: %s%n",
          missingAddressKeys);
    } else {
      // Creates an OfflineUserAddressInfo object that contains all the required elements of a
      // mailing address.
      OfflineUserAddressInfo addressInfo =
          OfflineUserAddressInfo.newBuilder()
              .setHashedFirstName(
                  normalizeAndHash(sha256Digest, rawRecord.get("firstName"), false))
              .setHashedLastName(
                  normalizeAndHash(sha256Digest, rawRecord.get("lastName"), false))
              .setCountryCode(rawRecord.get("countryCode"))
              .setPostalCode(rawRecord.get("postalCode"))
              .build();
      UserIdentifier addressIdentifier =
          UserIdentifier.newBuilder().setAddressInfo(addressInfo).build();
      // Adds the address identifier to the UserData object's list.
      userDataBuilder.addUserIdentifiers(addressIdentifier);
    }
  }

  if (!userDataBuilder.getUserIdentifiersList().isEmpty()) {
    // Builds the UserData and adds it to the list.
    userDataList.add(userDataBuilder.build());
  }
}

// Creates the operations to add users.
List<OfflineUserDataJobOperation> operations = new ArrayList<>();
for (UserData userData : userDataList) {
  operations.add(OfflineUserDataJobOperation.newBuilder().setCreate(userData).build());
}
AddCustomerMatchUserList.java

C#

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys
// "email", "phone", "firstName", "lastName", "countryCode", and "postalCode".
// In your application, this data might come from a file or a database.
List<Dictionary<string, string>> rawRecords = new List<Dictionary<string, string>>();

// The first user data has an email address and a phone number.
Dictionary<string, string> rawRecord1 = new Dictionary<string, string>();
rawRecord1.Add("email", "dana@example.com");
// Phone number to be converted to E.164 format, with a leading '+' as required.
// This includes whitespace that will be removed later.
rawRecord1.Add("phone", "+1 800 5550101");

// The second user data has an email address, a mailing address, and a phone number.
Dictionary<string, string> rawRecord2 = new Dictionary<string, string>();
// Email address that includes a period (.) before the Gmail domain.
rawRecord2.Add("email", "alex.2@example.com");
// Address that includes all four required elements: first name, last name, country
// code, and postal code.
rawRecord2.Add("firstName", "Alex");
rawRecord2.Add("lastName", "Quinn");
rawRecord2.Add("countryCode", "US");
rawRecord2.Add("postalCode", "94045");
// Phone number to be converted to E.164 format, with a leading '+' as required.
// This includes whitespace that will be removed later.
rawRecord2.Add("phone", "+1 800 5550102");

// The third user data only has an email address.
Dictionary<string, string> rawRecord3 = new Dictionary<string, string>();
rawRecord3.Add("email", "charlie@example.com");

// Adds the raw records to the raw input list.
rawRecords.Add(rawRecord1);
rawRecords.Add(rawRecord2);
rawRecords.Add(rawRecord3);

// Iterates over the raw input list and creates a UserData object for each record.
List<UserData> userDataList = new List<UserData>();
foreach (Dictionary<string, string> rawRecord in rawRecords) {
    // Creates a UserData object that represents a member of the user list.
    UserData userData = new UserData();
    // Checks if the record has email, phone, or address information, and adds a
    // SEPARATE UserIdentifier object for each one found.
    // For example, a record with an email address and a phone number will result in a
    // UserData with two UserIdentifiers.

    // IMPORTANT: Since the identifier attribute of UserIdentifier
    // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
    // is a oneof
    // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
    // only ONE of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId,
    // or addressInfo.
    // Setting more than one of these attributes on the same UserIdentifier will clear
    // all the other members of the oneof.
    // For example, the following code is INCORRECT and will result in a UserIdentifier
    // with ONLY a hashedPhoneNumber.
    //
    // UserIdentifier incorrectlyPopulatedUserIdentifier = new UserIdentifier()
    // {
    //      HashedEmail = "...",
    //      HashedPhoneNumber = "..."
    // };
    //
    // The separate 'if' statements below demonstrate the correct approach for creating
    // a UserData for a member with multiple UserIdentifiers.

    // Checks if the record has an email address, and if so, adds a UserIdentifier
    // for it.
    if (rawRecord.ContainsKey("email")) {
        UserIdentifier hashedEmailIdentifier = new UserIdentifier()
        {
            HashedEmail = NormalizeAndHash(rawRecord["email"], true)
        };

        userData.UserIdentifiers.Add(hashedEmailIdentifier);
    }

    // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
    if (rawRecord.ContainsKey("phone")) {
        UserIdentifier hashedPhoneNumberIdentifier = new UserIdentifier()
        {
            HashedPhoneNumber = NormalizeAndHash(rawRecord["phone"], true)
        };

        // Adds the hashed phone number identifier to the UserData object's list.
        userData.UserIdentifiers.Add(hashedPhoneNumberIdentifier);
    }

    // Checks if the record has all the required mailing address elements, and if so,
    // adds a UserIdentifier for the mailing address.
    if (rawRecord.ContainsKey("firstName")) {
        // Checks if the record contains all the other required elements of a mailing
        // address.
        HashSet<string> missingAddressKeys = new HashSet<string>();
        foreach (string addressKey in new string[] {"lastName", "countryCode",
            "postalCode"}) {
        if (!rawRecord.ContainsKey(addressKey)) {
            missingAddressKeys.Add(addressKey);
        }
        }

        if (!missingAddressKeys.Any()) {
        Console.WriteLine(
            $"Skipping addition of mailing address information because the following " +
                "required keys are missing: {missingAddressKeys}");
        } else {
            // Creates an OfflineUserAddressInfo object that contains all the required
            // elements of a mailing address.
            OfflineUserAddressInfo addressInfo = new OfflineUserAddressInfo()
            {
                HashedFirstName = NormalizeAndHash(rawRecord["firstName"]),
                HashedLastName = NormalizeAndHash(rawRecord["lastName"]),
                CountryCode = rawRecord["countryCode"],
                PostalCode = rawRecord["postalCode"]
            };

            UserIdentifier addressIdentifier = new UserIdentifier()
            {
                AddressInfo = addressInfo
            };

            // Adds the address identifier to the UserData object's list.
            userData.UserIdentifiers.Add(addressIdentifier);
        }
    }

    if (userData.UserIdentifiers.Any())
    {
        userDataList.Add(userData);
    }
}

// Creates the operations to add the users.
List<OfflineUserDataJobOperation> operations = new List<OfflineUserDataJobOperation>();
foreach(UserData userData in userDataList)
{
    operations.Add(new OfflineUserDataJobOperation()
    {
        Create = userData
    });
}
AddCustomerMatchUserList.cs

PHP

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys 'email',
// 'phone', 'firstName', 'lastName', 'countryCode', and 'postalCode'. In your application,
// this data might come from a file or a database.
$rawRecords = [];
// The first user data has an email address and a phone number.
$rawRecord1 = [
    // The first user data has an email address and a phone number.
    'email' => 'dana@example.com',
    // Phone number to be converted to E.164 format, with a leading '+' as required. This
    // includes whitespace that will be removed later.
    'phone' => '+1 800 5550101'
];
$rawRecords[] = $rawRecord1;

// The second user data has an email address, a mailing address, and a phone number.
$rawRecord2 = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Address that includes all four required elements: first name, last name, country
    // code, and postal code.
    'firstName' => 'Alex',
    'lastName' => 'Quinn',
    'countryCode' => 'US',
    'postalCode' => '94045',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
];
$rawRecords[] = $rawRecord2;

// The third user data only has an email address.
$rawRecord3 = ['email' => 'charlie@example.com'];
$rawRecords[] = $rawRecord3;

// Iterates over the raw input list and creates a UserData object for each record.
$userDataList = [];
foreach ($rawRecords as $rawRecord) {
    // Checks if the record has email, phone, or address information, and adds a SEPARATE
    // UserIdentifier object for each one found. For example, a record with an email address
    // and a phone number will result in a UserData with two UserIdentifiers.

    // IMPORTANT: Since the identifier attribute of UserIdentifier
    // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is
    // a oneof
    // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only
    // ONE of 'hashed_email, 'hashed_phone_number', 'mobile_id', 'third_party_user_id', or
    // 'address_info'.
    // Setting more than one of these attributes on the same UserIdentifier will clear all
    // the other members of the oneof. For example, the following code is INCORRECT and will
    // result in a UserIdentifier with ONLY a 'hashed_phone_number'.
    //
    // $incorrectlyPopulatedUserIdentifier = new UserIdentifier();
    // $incorrectlyPopulatedUserIdentifier->setHashedEmail('...');
    // $incorrectlyPopulatedUserIdentifier->setHashedPhoneNumber('...');
    //
    // The separate 'if' statements below demonstrate the correct approach for creating a
    // UserData for a member with multiple UserIdentifiers.

    $userIdentifiers = [];
    // Checks if the record has an email address, and if so, adds a UserIdentifier for it.
    if (array_key_exists('email', $rawRecord)) {
        $hashedEmailIdentifier = new UserIdentifier([
            'hashed_email' => self::normalizeAndHash($rawRecord['email'], true)
        ]);
        // Adds the hashed email identifier to the user identifiers list.
        $userIdentifiers[] = $hashedEmailIdentifier;
    }

    // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
    if (array_key_exists('phone', $rawRecord)) {
        $hashedPhoneNumberIdentifier = new UserIdentifier([
            'hashed_phone_number' => self::normalizeAndHash($rawRecord['phone'], true)
        ]);
        // Adds the hashed email identifier to the user identifiers list.
        $userIdentifiers[] = $hashedPhoneNumberIdentifier;
    }

    // Checks if the record has all the required mailing address elements, and if so, adds a
    // UserIdentifier for the mailing address.
    if (array_key_exists('firstName', $rawRecord)) {
        // Checks if the record contains all the other required elements of a mailing
        // address.
        $missingAddressKeys = [];
        foreach (['lastName', 'countryCode', 'postalCode'] as $addressKey) {
            if (!array_key_exists($addressKey, $rawRecord)) {
                $missingAddressKeys[] = $addressKey;
            }
        }
        if (!empty($missingAddressKeys)) {
            printf(
                "Skipping addition of mailing address information because the "
                . "following required keys are missing: %s%s",
                json_encode($missingAddressKeys),
                PHP_EOL
            );
        } else {
            // Creates an OfflineUserAddressInfo object that contains all the required
            // elements of a mailing address.
            $addressIdentifier = new UserIdentifier([
               'address_info' => new OfflineUserAddressInfo([
                   'hashed_first_name' => self::normalizeAndHash(
                       $rawRecord['firstName'],
                       false
                   ),
                   'hashed_last_name' => self::normalizeAndHash(
                       $rawRecord['lastName'],
                       false
                   ),
                   'country_code' => $rawRecord['countryCode'],
                   'postal_code' => $rawRecord['postalCode']
               ])
            ]);
            // Adds the address identifier to the user identifiers list.
            $userIdentifiers[] = $addressIdentifier;
        }
    }
    if (!empty($userIdentifiers)) {
        // Builds the UserData and adds it to the list.
        $userDataList[] = new UserData(['user_identifiers' => $userIdentifiers]);
    }
}

// Creates the operations to add users.
$operations = array_map(
    function (UserData $userData) {
        return new OfflineUserDataJobOperation(['create' => $userData]);
    },
    $userDataList
);
AddCustomerMatchUserList.php

Python

def build_offline_user_data_job_operations(client):
    """Creates a raw input list of unhashed user information.

    Each element of the list represents a single user and is a dict containing a
    separate entry for the keys "email", "phone", "first_name", "last_name",
    "country_code", and "postal_code". In your application, this data might come
    from a file or a database.

    Args:
        client: The Google Ads client.

    Returns:
        A list containing the operations.
    """
    # The first user data has an email address and a phone number.
    raw_record_1 = {
        "email": "dana@example.com",
        # Phone number to be converted to E.164 format, with a leading '+' as
        # required. This includes whitespace that will be removed later.
        "phone": "+1 800 5550101",
    }

    # The second user data has an email address, a mailing address, and a phone
    # number.
    raw_record_2 = {
        # Email address that includes a period (.) before the email domain.
        "email": "alex.2@example.com",
        # Address that includes all four required elements: first name, last
        # name, country code, and postal code.
        "first_name": "Alex",
        "last_name": "Quinn",
        "country_code": "US",
        "postal_code": "94045",
        # Phone number to be converted to E.164 format, with a leading '+' as
        # required.
        "phone": "+1 800 5550102",
    }

    # The third user data only has an email address.
    raw_record_3 = {"email": "charlie@example.com"}

    # Adds the raw records to a raw input list.
    raw_records = [raw_record_1, raw_record_2, raw_record_3]

    operations = []
    # Iterates over the raw input list and creates a UserData object for each
    # record.
    for record in raw_records:
        # Creates a UserData object that represents a member of the user list.
        user_data = client.get_type("UserData")

        # Checks if the record has email, phone, or address information, and
        # adds a SEPARATE UserIdentifier object for each one found. For example,
        # a record with an email address and a phone number will result in a
        # UserData with two UserIdentifiers.

        # IMPORTANT: Since the identifier attribute of UserIdentifier
        # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
        # is a oneof
        # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you
        # must set only ONE of hashed_email, hashed_phone_number, mobile_id,
        # third_party_user_id, or address-info. Setting more than one of these
        # attributes on the same UserIdentifier will clear all the other members
        # of the oneof. For example, the following code is INCORRECT and will
        # result in a UserIdentifier with ONLY a hashed_phone_number:

        # incorrect_user_identifier = client.get_type("UserIdentifier")
        # incorrect_user_identifier.hashed_email = "..."
        # incorrect_user_identifier.hashed_phone_number = "..."

        # The separate 'if' statements below demonstrate the correct approach
        # for creating a UserData object for a member with multiple
        # UserIdentifiers.

        # Checks if the record has an email address, and if so, adds a
        # UserIdentifier for it.
        if "email" in record:
            user_identifier = client.get_type("UserIdentifier")
            user_identifier.hashed_email = normalize_and_hash(
                record["email"], True
            )
            # Adds the hashed email identifier to the UserData object's list.
            user_data.user_identifiers.append(user_identifier)

        # Checks if the record has a phone number, and if so, adds a
        # UserIdentifier for it.
        if "phone" in record:
            user_identifier = client.get_type("UserIdentifier")
            user_identifier.hashed_phone_number = normalize_and_hash(
                record["phone"], True
            )
            # Adds the hashed phone number identifier to the UserData object's
            # list.
            user_data.user_identifiers.append(user_identifier)

        # Checks if the record has all the required mailing address elements,
        # and if so, adds a UserIdentifier for the mailing address.
        if "first_name" in record:
            required_keys = ("last_name", "country_code", "postal_code")
            # Checks if the record contains all the other required elements of
            # a mailing address.
            if not all(key in record for key in required_keys):
                # Determines which required elements are missing from the
                # record.
                missing_keys = record.keys() - required_keys
                print(
                    "Skipping addition of mailing address information "
                    "because the following required keys are missing: "
                    f"{missing_keys}"
                )
            else:
                user_identifier = client.get_type("UserIdentifier")
                address_info = user_identifier.address_info
                address_info.hashed_first_name = normalize_and_hash(
                    record["first_name"], False
                )
                address_info.hashed_last_name = normalize_and_hash(
                    record["last_name"], False
                )
                address_info.country_code = record["country_code"]
                address_info.postal_code = record["postal_code"]
                user_data.user_identifiers.append(user_identifier)

        # If the user_identifiers repeated field is not empty, create a new
        # OfflineUserDataJobOperation and add the UserData to it.
        if user_data.user_identifiers:
            operation = client.get_type("OfflineUserDataJobOperation")
            operation.create = user_data
            operations.append(operation)
add_customer_match_user_list.py

小茹

# Create a list of unhashed user data records that we will format in the
# following steps to prepare for the API.
raw_records = [
  # The first user data has an email address and a phone number.
  {
    email: 'dana@example.com',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required. This includes whitespace that will be removed later.
    phone: '+1 800 5550100',
  },
  # The second user data has an email address, a phone number, and an address.
  {
    # Email address that includes a period (.) before the Gmail domain.
    email: 'alex.2@example.com',
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    first_name: 'Alex',
    last_name: 'Quinn',
    country_code: 'US',
    postal_code: '94045',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    phone: '+1 800 5550102',
  },
  # The third user data only has an email address.
  {
    email: 'charlie@example.com',
  },
]

# Create a UserData for each entry in the raw records.
user_data_list = raw_records.map do |record|
  client.resource.user_data do |data|
    if record[:email]
      data.user_identifiers << client.resource.user_identifier do |ui|
        ui.hashed_email = normalize_and_hash(record[:email], true)
      end
    end
    if record[:phone]
      data.user_identifiers << client.resource.user_identifier do |ui|
        ui.hashed_phone_number = normalize_and_hash(record[:phone], true)
      end
    end
    if record[:first_name]
      # Check that we have all the required information.
      missing_keys = [:last_name, :country_code, :postal_code].reject {|key|
        record[key].nil?
      }
      if missing_keys.empty?
        # If nothing is missing, add the address.
        data.user_identifiers << client.resource.user_identifier do |ui|
          ui.address_identifier = client.resource.offline_user_address_info do |address|
            address.hashed_first_name = normalize_and_hash(record[:first_name])
            address.hashed_last_name = normalize_and_hash(record[:last_name])
            address.country_code = record[:country_code]
            address.postal_code = record[:postal_code]
          end
        end
      else
        # If some data is missing, skip this entry.
        puts "Skipping addition of mailing information because the following keys are missing:" \
          "#{missing_keys}"
      end
    end
  end
end

operations = user_data_list.map do |user_data|
  client.operation.create_resource.offline_user_data_job(user_data)
end
add_customer_match_user_list.rb

Perl

  # The first user data has an email address and a phone number.
  my $raw_record_1 = {
    email => 'dana@example.com',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required. This includes whitespace that will be removed later.
    phone => '+1 800 5550101',
  };

  # The second user data has an email address, a mailing address, and a phone
  # number.
  my $raw_record_2 = {
    # Email address that includes a period (.) before the Gmail domain.
    email => 'alex.2@example.com',
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    firstName   => 'Alex',
    lastName    => 'Quinn',
    countryCode => 'US',
    postalCode  => '94045',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    phone => '+1 800 5550102',
  };

  # The third user data only has an email address.
  my $raw_record_3 = {email => 'charlie@example.com',};

  my $raw_records = [$raw_record_1, $raw_record_2, $raw_record_3];

  my $operations = [];
  foreach my $record (@$raw_records) {
    # Check if the record has email, phone, or address information, and adds a
    # SEPARATE UserIdentifier object for each one found. For example, a record
    # with an email address and a phone number will result in a UserData with two
    # UserIdentifiers.
    #
    # IMPORTANT: Since the identifier attribute of UserIdentifier
    # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
    # is a oneof
    # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
    # only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
    # or address-info. Setting more than one of these attributes on the same UserIdentifier
    # will clear all the other members of the oneof. For example, the following code is
    # INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
    #
    # my $incorrect_user_identifier = Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
    #   hashedEmail => '...',
    #   hashedPhoneNumber => '...',
    # });
    #
    # The separate 'if' statements below demonstrate the correct approach for creating a
    # UserData object for a member with multiple UserIdentifiers.

    my $user_identifiers = [];

    # Check if the record has an email address, and if so, add a UserIdentifier for it.
    if (defined $record->{email}) {
      # Add the hashed email identifier to the list of UserIdentifiers.
      push(
        @$user_identifiers,
        Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
            hashedEmail => normalize_and_hash($record->{email}, 1)}));
    }

    # Check if the record has a phone number, and if so, add a UserIdentifier for it.
    if (defined $record->{phone}) {
      # Add the hashed phone number identifier to the list of UserIdentifiers.
      push(
        @$user_identifiers,
        Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
            hashedPhoneNumber => normalize_and_hash($record->{phone}, 1)}));
    }

    # Check if the record has all the required mailing address elements, and if so, add
    # a UserIdentifier for the mailing address.
    if (defined $record->{firstName}) {
      my $required_keys = ["lastName", "countryCode", "postalCode"];
      my $missing_keys  = [];

      foreach my $key (@$required_keys) {
        if (!defined $record->{$key}) {
          push(@$missing_keys, $key);
        }
      }

      if (@$missing_keys) {
        print
"Skipping addition of mailing address information because the following"
          . "keys are missing: "
          . join(",", @$missing_keys);
      } else {
        push(
          @$user_identifiers,
          Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
              addressInfo =>
                Google::Ads::GoogleAds::V17::Common::OfflineUserAddressInfo->
                new({
                  # First and last name must be normalized and hashed.
                  hashedFirstName => normalize_and_hash($record->{firstName}),
                  hashedLastName  => normalize_and_hash($record->{lastName}),
                  # Country code and zip code are sent in plain text.
                  countryCode => $record->{countryCode},
                  postalCode  => $record->{postalCode},
                })}));
      }
    }

    # If the user_identifiers array is not empty, create a new
    # OfflineUserDataJobOperation and add the UserData to it.
    if (@$user_identifiers) {
      my $user_data = Google::Ads::GoogleAds::V17::Common::UserData->new({
          userIdentifiers => [$user_identifiers]});
      push(
        @$operations,
        Google::Ads::GoogleAds::V17::Services::OfflineUserDataJobService::OfflineUserDataJobOperation
          ->new({
            create => $user_data
          }));
    }
  }
add_customer_match_user_list.pl

驗證名單上傳和媒合率

如果 OfflineUserDataJob 具備 SUCCESS 狀態，預估媒合率為 提供的 operation_metadata.match_rate_range ] 欄位。如果在工作完成前查詢這個欄位，這個欄位中的值就會 的值可能為零確認媒合率已準備好進行驗證和名單 的指定目標建議 我們建議輪詢工作來完成狀態這可能需要 大概需要 10 分鐘 或 24 小時才能完成工作

查看工作狀態的程式碼範例

Java

private void checkJobStatus(
    GoogleAdsClient googleAdsClient, long customerId, String offlineUserDataJobResourceName) {
  try (GoogleAdsServiceClient googleAdsServiceClient =
      googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
    String query =
        String.format(
            "SELECT offline_user_data_job.resource_name, "
                + "offline_user_data_job.id, "
                + "offline_user_data_job.status, "
                + "offline_user_data_job.type, "
                + "offline_user_data_job.failure_reason, "
                + "offline_user_data_job.customer_match_user_list_metadata.user_list "
                + "FROM offline_user_data_job "
                + "WHERE offline_user_data_job.resource_name = '%s'",
            offlineUserDataJobResourceName);
    // Issues the query and gets the GoogleAdsRow containing the job from the response.
    GoogleAdsRow googleAdsRow =
        googleAdsServiceClient
            .search(Long.toString(customerId), query)
            .iterateAll()
            .iterator()
            .next();
    OfflineUserDataJob offlineUserDataJob = googleAdsRow.getOfflineUserDataJob();
    System.out.printf(
        "Offline user data job ID %d with type '%s' has status: %s%n",
        offlineUserDataJob.getId(), offlineUserDataJob.getType(), offlineUserDataJob.getStatus());
    OfflineUserDataJobStatus jobStatus = offlineUserDataJob.getStatus();
    if (OfflineUserDataJobStatus.SUCCESS == jobStatus) {
      // Prints information about the user list.
      printCustomerMatchUserListInfo(
          googleAdsClient,
          customerId,
          offlineUserDataJob.getCustomerMatchUserListMetadata().getUserList());
    } else if (OfflineUserDataJobStatus.FAILED == jobStatus) {
      System.out.printf("  Failure reason: %s%n", offlineUserDataJob.getFailureReason());
    } else if (OfflineUserDataJobStatus.PENDING == jobStatus
        || OfflineUserDataJobStatus.RUNNING == jobStatus) {
      System.out.println();
      System.out.printf(
          "To check the status of the job periodically, use the following GAQL query with"
              + " GoogleAdsService.search:%n%s%n",
          query);
    }
  }
}

AddCustomerMatchUserList.java

C#

private static void CheckJobStatusAndPrintResults(GoogleAdsClient client, long customerId,
    string offlineUserDataJobResourceName)
{
    // Get the GoogleAdsService.
    GoogleAdsServiceClient service = client.GetService(Services.V17.GoogleAdsService);

    string query = "SELECT offline_user_data_job.resource_name, " +
        "offline_user_data_job.id, offline_user_data_job.status, " +
        "offline_user_data_job.type, offline_user_data_job.failure_reason " +
        "offline_user_data_job.customer_match_user_list_metadata_user_list " +
        "FROM offline_user_data_job WHERE " +
        $"offline_user_data_job.resource_name = '{offlineUserDataJobResourceName}'";

    // Issues the query and gets the GoogleAdsRow containing the job from the response.
    GoogleAdsRow googleAdsRow = service.Search(customerId.ToString(), query).First();

    OfflineUserDataJob offlineUserDataJob = googleAdsRow.OfflineUserDataJob;
    Console.WriteLine($"Offline user data job ID {offlineUserDataJob.Id} with type " +
        $"'{offlineUserDataJob.Type}' has status: {offlineUserDataJob.Status}");

    switch (offlineUserDataJob.Status)
    {
        case OfflineUserDataJobStatus.Success:
            // Prints information about the user list.
            PrintCustomerMatchUserListInfo(client, customerId,
                offlineUserDataJob.CustomerMatchUserListMetadata.UserList);
            break;

        case OfflineUserDataJobStatus.Failed:
            Console.WriteLine($"  Failure reason: {offlineUserDataJob.FailureReason}");
            break;

        case OfflineUserDataJobStatus.Pending:
        case OfflineUserDataJobStatus.Running:
            Console.WriteLine("To check the status of the job periodically, use the " +
                $"following GAQL query with GoogleAdsService.search:\n\n{query}");
            break;
    }
}
AddCustomerMatchUserList.cs

PHP

private static function checkJobStatus(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    string $offlineUserDataJobResourceName
) {
    $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();

    // Creates a query that retrieves the offline user data job.
    $query = "SELECT offline_user_data_job.resource_name, "
          . "offline_user_data_job.id, "
          . "offline_user_data_job.status, "
          . "offline_user_data_job.type, "
          . "offline_user_data_job.failure_reason, "
          . "offline_user_data_job.customer_match_user_list_metadata.user_list "
          . "FROM offline_user_data_job "
          . "WHERE offline_user_data_job.resource_name = '$offlineUserDataJobResourceName'";

    // Issues a search request to get the GoogleAdsRow containing the job from the response.
    /** @var GoogleAdsRow $googleAdsRow */
    $googleAdsRow =
        $googleAdsServiceClient->search(SearchGoogleAdsRequest::build($customerId, $query))
            ->getIterator()
            ->current();
    $offlineUserDataJob = $googleAdsRow->getOfflineUserDataJob();

    // Prints out some information about the offline user data job.
    $offlineUserDataJobStatus = $offlineUserDataJob->getStatus();
    printf(
        "Offline user data job ID %d with type '%s' has status: %s.%s",
        $offlineUserDataJob->getId(),
        OfflineUserDataJobType::name($offlineUserDataJob->getType()),
        OfflineUserDataJobStatus::name($offlineUserDataJobStatus),
        PHP_EOL
    );

    if ($offlineUserDataJobStatus === OfflineUserDataJobStatus::SUCCESS) {
        // Prints information about the user list.
        self::printCustomerMatchUserListInfo(
            $googleAdsClient,
            $customerId,
            $offlineUserDataJob->getCustomerMatchUserListMetadata()->getUserList()
        );
    } elseif ($offlineUserDataJobStatus === OfflineUserDataJobStatus::FAILED) {
        printf("  Failure reason: %s.%s", $offlineUserDataJob->getFailureReason(), PHP_EOL);
    } elseif (
        $offlineUserDataJobStatus === OfflineUserDataJobStatus::PENDING
        || $offlineUserDataJobStatus === OfflineUserDataJobStatus::RUNNING
    ) {
        printf(
            '%1$sTo check the status of the job periodically, use the following GAQL query with'
            . ' GoogleAdsService.search:%1$s%2$s%1$s',
            PHP_EOL,
            $query
        );
    }
}
AddCustomerMatchUserList.php

Python

def check_job_status(client, customer_id, offline_user_data_job_resource_name):
    """Retrieves, checks, and prints the status of the offline user data job.

    If the job is completed successfully, information about the user list is
    printed. Otherwise, a GAQL query will be printed, which can be used to
    check the job status at a later date.

    Offline user data jobs may take 6 hours or more to complete, so checking the
    status periodically, instead of waiting, can be more efficient.

    Args:
        client: The Google Ads client.
        customer_id: The ID for the customer that owns the user list.
        offline_user_data_job_resource_name: The resource name of the offline
            user data job to get the status of.
    """
    query = f"""
        SELECT
          offline_user_data_job.resource_name,
          offline_user_data_job.id,
          offline_user_data_job.status,
          offline_user_data_job.type,
          offline_user_data_job.failure_reason,
          offline_user_data_job.customer_match_user_list_metadata.user_list
        FROM offline_user_data_job
        WHERE offline_user_data_job.resource_name =
          '{offline_user_data_job_resource_name}'
        LIMIT 1"""

    # Issues a search request using streaming.
    google_ads_service = client.get_service("GoogleAdsService")
    results = google_ads_service.search(customer_id=customer_id, query=query)
    offline_user_data_job = next(iter(results)).offline_user_data_job
    status_name = offline_user_data_job.status.name
    user_list_resource_name = (
        offline_user_data_job.customer_match_user_list_metadata.user_list
    )

    print(
        f"Offline user data job ID '{offline_user_data_job.id}' with type "
        f"'{offline_user_data_job.type_.name}' has status: {status_name}"
    )

    if status_name == "SUCCESS":
        print_customer_match_user_list_info(
            client, customer_id, user_list_resource_name
        )
    elif status_name == "FAILED":
        print(f"\tFailure Reason: {offline_user_data_job.failure_reason}")
    elif status_name in ("PENDING", "RUNNING"):
        print(
            "To check the status of the job periodically, use the following "
            f"GAQL query with GoogleAdsService.Search: {query}"
        )
add_customer_match_user_list.py

小茹

def check_job_status(client, customer_id, offline_user_data_job)
  query = <<~QUERY
    SELECT
      offline_user_data_job.id,
      offline_user_data_job.status,
      offline_user_data_job.type,
      offline_user_data_job.failure_reason,
      offline_user_data_job.customer_match_user_list_metadata.user_list
    FROM
      offline_user_data_job
    WHERE
      offline_user_data_job.resource_name = '#{offline_user_data_job}'
  QUERY

  row = client.service.google_ads.search(
    customer_id: customer_id,
    query: query,
  ).first

  job = row.offline_user_data_job
  puts "Offline user data job ID #{job.id} with type '#{job.type}' has status: #{job.status}."

  case job.status
  when :SUCCESS
    print_customer_match_user_list(client, customer_id, job.customer_match_user_list_metadata.user_list)
  when :FAILED
    puts "  Failure reason: #{job.failure_reason}"
  else
    puts "  To check the status of the job periodically, use the following GAQL " \
      "query with GoogleAdsService.search:"
    puts query
  end
end
add_customer_match_user_list.rb

Perl

sub check_job_status() {
  my ($api_client, $customer_id, $offline_user_data_job_resource_name) = @_;

  my $search_query =
    "SELECT offline_user_data_job.resource_name, " .
    "offline_user_data_job.id, offline_user_data_job.status, " .
    "offline_user_data_job.type, offline_user_data_job.failure_reason, " .
    "offline_user_data_job.customer_match_user_list_metadata.user_list " .
    "FROM offline_user_data_job " .
    "WHERE offline_user_data_job.resource_name = " .
    "$offline_user_data_job_resource_name LIMIT 1";

  my $search_request =
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::SearchGoogleAdsRequest
    ->new({
      customerId => $customer_id,
      query      => $search_query
    });

  # Get the GoogleAdsService.
  my $google_ads_service = $api_client->GoogleAdsService();

  my $iterator = Google::Ads::GoogleAds::Utils::SearchGoogleAdsIterator->new({
    service => $google_ads_service,
    request => $search_request
  });

  # The results have exactly one row.
  my $google_ads_row        = $iterator->next;
  my $offline_user_data_job = $google_ads_row->{offlineUserDataJob};
  my $status                = $offline_user_data_job->{status};

  printf
    "Offline user data job ID %d with type %s has status: %s.\n",
    $offline_user_data_job->{id},
    $offline_user_data_job->{type},
    $status;

  if ($status eq SUCCESS) {
    print_customer_match_user_list_info($api_client, $customer_id,
      $offline_user_data_job->{customerMatchUserListMetadata}{userList});
  } elsif ($status eq FAILED) {
    print "Failure reason: $offline_user_data_job->{failure_reason}";
  } elsif (grep /$status/, (PENDING, RUNNING)) {
    print
      "To check the status of the job periodically, use the following GAQL " .
      "query with the GoogleAdsService->search() method:\n$search_query\n";
  }

  return 1;
}
add_customer_match_user_list.pl

如要確認名單人數，您可以查詢 user_list 資源。

查詢 user_list 資源的程式碼範例

Java

try (GoogleAdsServiceClient googleAdsServiceClient =
    googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
  // Creates a query that retrieves the user list.
  String query =
      String.format(
          "SELECT user_list.size_for_display, user_list.size_for_search "
              + "FROM user_list "
              + "WHERE user_list.resource_name = '%s'",
          userListResourceName);

  // Constructs the SearchGoogleAdsStreamRequest.
  SearchGoogleAdsStreamRequest request =
      SearchGoogleAdsStreamRequest.newBuilder()
          .setCustomerId(Long.toString(customerId))
          .setQuery(query)
          .build();

  // Issues the search stream request.
  ServerStream<SearchGoogleAdsStreamResponse> stream =
      googleAdsServiceClient.searchStreamCallable().call(request);
AddCustomerMatchUserList.java

C#

 // Get the GoogleAdsService.
 GoogleAdsServiceClient service =
     client.GetService(Services.V17.GoogleAdsService);

 // Creates a query that retrieves the user list.
 string query =
     "SELECT user_list.size_for_display, user_list.size_for_search " +
     "FROM user_list " +
     $"WHERE user_list.resource_name = '{userListResourceName}'";
 // Issues a search stream request.
 service.SearchStream(customerId.ToString(), query,
    delegate (SearchGoogleAdsStreamResponse resp)
    {
        // Display the results.
        foreach (GoogleAdsRow userListRow in resp.Results)
        {
            UserList userList = userListRow.UserList;
            Console.WriteLine("The estimated number of users that the user list " +
                $"'{userList.ResourceName}' has is {userList.SizeForDisplay}" +
                $" for Display and {userList.SizeForSearch} for Search.");
        }
    }
);
AddCustomerMatchUserList.cs

PHP

$googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();

// Creates a query that retrieves the user list.
$query =
    "SELECT user_list.size_for_display, user_list.size_for_search " .
    "FROM user_list " .
    "WHERE user_list.resource_name = '$userListResourceName'";

// Issues a search stream request.
/** @var GoogleAdsServerStreamDecorator $stream */
$stream = $googleAdsServiceClient->searchStream(
    SearchGoogleAdsStreamRequest::build($customerId, $query)
);
AddCustomerMatchUserList.php

Python

googleads_service_client = client.get_service("GoogleAdsService")

# Creates a query that retrieves the user list.
query = f"""
    SELECT
      user_list.size_for_display,
      user_list.size_for_search
    FROM user_list
    WHERE user_list.resource_name = '{user_list_resource_name}'"""

# Issues a search request.
search_results = googleads_service_client.search(
    customer_id=customer_id, query=query
)
add_customer_match_user_list.py

小茹

query = <<~EOQUERY
  SELECT user_list.size_for_display, user_list.size_for_search
  FROM user_list
  WHERE user_list.resource_name = #{user_list}
EOQUERY

response = client.service.google_ads.search_stream(
  customer_id: customer_id,
  query: query,
)
add_customer_match_user_list.rb

Perl

# Create a query that retrieves the user list.
my $search_query =
  "SELECT user_list.size_for_display, user_list.size_for_search " .
  "FROM user_list " .
  "WHERE user_list.resource_name = '$user_list_resource_name'";

# Create a search Google Ads stream request that will retrieve the user list.
my $search_stream_request =
  Google::Ads::GoogleAds::V17::Services::GoogleAdsService::SearchGoogleAdsStreamRequest
  ->new({
    customerId => $customer_id,
    query      => $search_query,
  });

# Get the GoogleAdsService.
my $google_ads_service = $api_client->GoogleAdsService();

my $search_stream_handler =
  Google::Ads::GoogleAds::Utils::SearchStreamHandler->new({
    service => $google_ads_service,
    request => $search_stream_request
  });
add_customer_match_user_list.pl

基於隱私考量，使用者名單人數會顯示為零，直到名單中的以下數字為止： 至少有 1,000 名成員。之後，該大小會四捨五入為最顯著的二 數字。

執行 OfflineUserDataJob 期間發生的錯誤可透過以下方法擷取： 這個 offline_user_data_job 使用 Google Ads 查詢語言的資源不過請注意，這份報表不包含 任何失敗相符項目的相關資訊 (因為系統只會比較雜湊值) 有效的對戰。請參閱疑難排解 指南 可以解決客戶名單相關問題

與 Google Ads UI 相比

在目標對像管理工具中查看名單時，名單人數可能會少於預期 和一些變更主題這個檢視畫面會顯示名單中的活躍使用者人數。 如需詳細資訊，請參閱疑難排解 指南。

由於名單最多需要 24 小時才會填入成員， 可能會看到 In Progress 狀態， 最多每 12 小時上傳一次目標對象名單的頻率。

指定我的名單

您可以在廣告群組或廣告活動層級指定名單。 程序與 API 中其他類型的指定條件類似。

程式碼範例：將廣告群組中的廣告指定至使用者名單

Java

private String targetAdsInAdGroupToUserList(
    GoogleAdsClient googleAdsClient, long customerId, long adGroupId, String userList) {
  // Creates the ad group criterion targeting members of the user list.
  AdGroupCriterion adGroupCriterion =
      AdGroupCriterion.newBuilder()
          .setAdGroup(ResourceNames.adGroup(customerId, adGroupId))
          .setUserList(UserListInfo.newBuilder().setUserList(userList).build())
          .build();

  // Creates the operation.
  AdGroupCriterionOperation operation =
      AdGroupCriterionOperation.newBuilder().setCreate(adGroupCriterion).build();

  // Creates the ad group criterion service.
  try (AdGroupCriterionServiceClient adGroupCriterionServiceClient =
      googleAdsClient.getLatestVersion().createAdGroupCriterionServiceClient()) {
    // Adds the ad group criterion.
    MutateAdGroupCriteriaResponse response =
        adGroupCriterionServiceClient.mutateAdGroupCriteria(
            Long.toString(customerId), ImmutableList.of(operation));
    // Gets and prints the results.
    String adGroupCriterionResourceName = response.getResults(0).getResourceName();
    System.out.printf(
        "Successfully created ad group criterion with resource name '%s' "
            + "targeting user list with resource name '%s' with ad group with ID %d.%n",
        adGroupCriterionResourceName, userList, adGroupId);
    return adGroupCriterionResourceName;
  }
}

SetUpRemarketing.java

C#

private string TargetAdsInAdGroupToUserList(
    GoogleAdsClient client, long customerId, long adGroupId, string userListResourceName)
{
    // Get the AdGroupCriterionService client.
    AdGroupCriterionServiceClient adGroupCriterionServiceClient = client.GetService
        (Services.V17.AdGroupCriterionService);

    // Create the ad group criterion targeting members of the user list.
    AdGroupCriterion adGroupCriterion = new AdGroupCriterion
    {
        AdGroup = ResourceNames.AdGroup(customerId, adGroupId),
        UserList = new UserListInfo
        {
            UserList = userListResourceName
        }
    };

    // Create the operation.
    AdGroupCriterionOperation adGroupCriterionOperation = new AdGroupCriterionOperation
    {
        Create = adGroupCriterion
    };

    // Add the ad group criterion, then print and return the new criterion's resource name.
    MutateAdGroupCriteriaResponse mutateAdGroupCriteriaResponse =
        adGroupCriterionServiceClient.MutateAdGroupCriteria(customerId.ToString(),
            new[] { adGroupCriterionOperation });

    string adGroupCriterionResourceName =
        mutateAdGroupCriteriaResponse.Results.First().ResourceName;
    Console.WriteLine("Successfully created ad group criterion with resource name " +
        $"'{adGroupCriterionResourceName}' targeting user list with resource name " +
        $"'{userListResourceName}' with ad group with ID {adGroupId}.");
    return adGroupCriterionResourceName;
}
SetUpRemarketing.cs

PHP

private static function targetAdsInAdGroupToUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $adGroupId,
    string $userListResourceName
): string {
    // Creates the ad group criterion targeting members of the user list.
    $adGroupCriterion = new AdGroupCriterion([
        'ad_group' => ResourceNames::forAdGroup($customerId, $adGroupId),
        'user_list' => new UserListInfo(['user_list' => $userListResourceName])
    ]);

    // Creates the operation.
    $operation = new AdGroupCriterionOperation();
    $operation->setCreate($adGroupCriterion);

    // Issues a mutate request to add an ad group criterion.
    $adGroupCriterionServiceClient = $googleAdsClient->getAdGroupCriterionServiceClient();
    /** @var MutateAdGroupCriteriaResponse $adGroupCriterionResponse */
    $adGroupCriterionResponse = $adGroupCriterionServiceClient->mutateAdGroupCriteria(
        MutateAdGroupCriteriaRequest::build($customerId, [$operation])
    );

    $adGroupCriterionResourceName =
        $adGroupCriterionResponse->getResults()[0]->getResourceName();
    printf(
        "Successfully created ad group criterion with resource name '%s' " .
        "targeting user list with resource name '%s' with ad group with ID %d.%s",
        $adGroupCriterionResourceName,
        $userListResourceName,
        $adGroupId,
        PHP_EOL
    );

    return $adGroupCriterionResourceName;
}
SetUpRemarketing.php

Python

def target_ads_in_ad_group_to_user_list(
    client, customer_id, ad_group_id, user_list_resource_name
):
    """Creates an ad group criterion that targets a user list with an ad group.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID used to create an ad group
            criterion.
        ad_group_id: a str ID for an ad group used to create an ad group
            criterion that targets members of a user list.
        user_list_resource_name: a str resource name for a user list.

    Returns:
        a str resource name for an ad group criterion.
    """
    ad_group_criterion_operation = client.get_type("AdGroupCriterionOperation")
    # Creates the ad group criterion targeting members of the user list.
    ad_group_criterion = ad_group_criterion_operation.create
    ad_group_criterion.ad_group = client.get_service(
        "AdGroupService"
    ).ad_group_path(customer_id, ad_group_id)
    ad_group_criterion.user_list.user_list = user_list_resource_name

    ad_group_criterion_service = client.get_service("AdGroupCriterionService")
    response = ad_group_criterion_service.mutate_ad_group_criteria(
        customer_id=customer_id, operations=[ad_group_criterion_operation]
    )
    resource_name = response.results[0].resource_name
    print(
        "Successfully created ad group criterion with resource name: "
        f"'{resource_name}' targeting user list with resource name: "
        f"'{user_list_resource_name}' and with ad group with ID "
        f"{ad_group_id}."
    )
    return resource_name
set_up_remarketing.py

小茹

def target_ads_in_ad_group_to_user_list(
  client,
  customer_id,
  ad_group_id,
  user_list
)
  # Creates the ad group criterion targeting members of the user list.
  operation = client.operation.create_resource.ad_group_criterion do |agc|
    agc.ad_group = client.path.ad_group(customer_id, ad_group_id)
    agc.user_list = client.resource.user_list_info do |info|
      info.user_list = user_list
    end
  end

  # Issues a mutate request to create the ad group criterion.
  response = client.service.ad_group_criterion.mutate_ad_group_criteria(
    customer_id: customer_id,
    operations: [operation],
  )
  ad_group_criterion_resource_name = response.results.first.resource_name
  puts "Successfully created ad group criterion with resource name " \
    "'#{ad_group_criterion_resource_name}' targeting user list with resource name " \
    "'#{user_list}' with ad group with ID #{ad_group_id}"

  ad_group_criterion_resource_name
end
set_up_remarketing.rb

Perl

sub target_ads_in_ad_group_to_user_list {
  my ($api_client, $customer_id, $ad_group_id, $user_list_resource_name) = @_;

  # Create the ad group criterion targeting members of the user list.
  my $ad_group_criterion =
    Google::Ads::GoogleAds::V17::Resources::AdGroupCriterion->new({
      adGroup => Google::Ads::GoogleAds::V17::Utils::ResourceNames::ad_group(
        $customer_id, $ad_group_id
      ),
      userList => Google::Ads::GoogleAds::V17::Common::UserListInfo->new({
          userList => $user_list_resource_name
        })});

  # Create the operation.
  my $ad_group_criterion_operation =
    Google::Ads::GoogleAds::V17::Services::AdGroupCriterionService::AdGroupCriterionOperation
    ->new({
      create => $ad_group_criterion
    });

  # Add the ad group criterion, then print and return the new criterion's resource name.
  my $ad_group_criteria_response =
    $api_client->AdGroupCriterionService()->mutate({
      customerId => $customer_id,
      operations => [$ad_group_criterion_operation]});

  my $ad_group_criterion_resource_name =
    $ad_group_criteria_response->{results}[0]{resourceName};
  printf "Successfully created ad group criterion with resource name '%s' " .
    "targeting user list with resource name '%s' with ad group with ID %d.\n",
    $ad_group_criterion_resource_name, $user_list_resource_name, $ad_group_id;

  return $ad_group_criterion_resource_name;
}
set_up_remarketing.pl

指定多份顧客名單

crm_based_user_list 只能與另一個 crm_based_user_list 合併 在使用 logical_user_list 時特別標出 產生的使用者名單都會套用「crm_based_user_list」的所有政策。