Telefon Araması Dönüşümlerini Yükle

Çevrimdışı çağrı yüklemek için Google Ads API'yi dönüşümleri Google Ads'e telefon aramaları sağlayan reklamları ve bu telefon aramalarının ne zaman potansiyel müşterileri dönüşüm hunisinin orta kısmına yönelik bir dizi yeni adımdır.

Mobil tıkla ve ara tıklaması, sağlanmışsa dönüşüm olarak yüklenemez Aramaya eklenen Google yönlendirme numarası. Google yönlendirme olmadan Google'ın tıklamanın bir aramaya yol açtığından emin olabilmesi için bir yöntem yok. dönüşüm olarak kabul edilir. Bu şekilde bir tıklama yüklenirse bu tıklama, dönüşüm işlemidir.

Google Ads kullanıcı arayüzü ile eşleme, Yüklemeler dönüşümünü kullanma ile aynıdır. kaynak ve ardından Telefon aramalarından elde edilen dönüşümler'i seçin.

Telefon araması dönüşümü oluşturma

CallConversion oluştururken aklınızda bulundurmanız gereken birkaç nokta:

  • Google Ads API'nin v15 sürümünden itibaren consent CallConversion nesne.

  • Etiketin partial_failure özelliği UploadCallConversionsRequest her zaman true olarak ayarlanmalıdır. Kısmi hataları düzeltme kurallarından yararlanarak geçerli ve aynı anda başarısız olan işlemleri takip etmektir.

  • Bir müşteri TOO_RECENT_CONVERSION_ACTION veya TOO_RECENT_CALL yükleme dönüşümü isteğine yanıt mesajı iletmeniz gerekiyorsa, 6 saat veya 12 saat kontrol edin.

  • İçe aktarılan dönüşüm istatistiklerinin Google Ads hesabınızla oturum açın.

  • Yinelenen dönüşümler (yaniCallConversion caller_id, conversion_date_time ve conversion_action önceden yüklenmişse) CALL_CONVERSION_ALREADY_EXISTS hatası döndürülür.

    • Tek bir istek aynı dönüşüm için birden fazla işlem içeriyorsa DUPLICATE_CALL_CONVERSION_IN_REQUEST hatası döndürülür.

Telefon araması dönüşümü yükleme

Çevrimdışı telefon araması dönüşümlerinizi bir dönüşüm işlemiyle ilişkilendirmek için şu bilgilere gerek vardır: arayan kimliği (telefon numarası), dönüşüm tarihi saatini, dönüşüm işlemi kaynağı adını ve isteğe bağlı olarak dönüşüm değerini ve para birimini ConversionUploadService. Farklı girişlerle ilgili daha fazla bilgi edinmek için Yardım daha fazla bilgi edinin. Kod example, farklı girişlerin biçimlerini de açıklar.

Şartlar

Yükleme sırasında karşılanması gereken birkaç koşul vardır: CallConversion.

ConversionUploadError.INVALID_CONVERSION_ACTION hatasını önlemek için conversion_action özelliği Aşağıdaki durumlarda bir ConversionAction'ye başvurmalıdır:

  • ConversionActionType UPLOAD_CALLS

  • İlgili içeriği oluşturmak için kullanılan status/ConversionAction oda: ENABLED. Aksi takdirde, işlem NO_CONVERSION_ACTION_FOUND hatası.

  • ConversionAction, şunun Google Ads dönüşüm müşterisinde var: Tıklamanın Google Ads hesabı.

Ayrıca ConversionAction.category en iyi tanımlayan kategoriyi seçin.

Ayrıca, aşağıdaki koşulların karşılanması gerekir:

  • Görüşme sırasında dönüşüm izleme Google Ads dönüşüm müşterisi çağrının Google Ads hesabından

  • customer_id UploadCallConversionsRequest Google Ads dönüşümünün müşteri kimliği olmalıdır müşterisi çağrının Google Ads hesabına bağlayabilirsiniz. Aksi takdirde, dönüşüm yüklemesi ile ConversionUploadError.INVALID_CUSTOMER_FOR_CALL hata.

  • conversion_value, sıfırdan büyük veya sıfırdan büyük olmalıdır.

  • conversion_date_time için bir saat dilimi belirtilmelidir. Biçim ise olması yyyy-mm-dd HH:mm:ss+|-HH:mm, örneğin: 2022-01-01 19:32:45-05:00 (yaz saati uygulaması yok sayılıyor) , Saat dilimi, geçerli herhangi bir değer için olabilir: hesabın saat dilimiyle eşleşmesi gerekmez.

Kod örneği

Java

private void runExample(
    GoogleAdsClient googleAdsClient,
    long customerId,
    String conversionActionId,
    String callerId,
    String callStartDateTime,
    double conversionValue,
    Long conversionCustomVariableId,
    String conversionCustomVariableValue,
    ConsentStatus adUserDataConsent) {
  // Create a call conversion by specifying currency as USD.
  CallConversion.Builder conversionBuilder =
      CallConversion.newBuilder()
          .setConversionAction(conversionActionId)
          .setCallerId(callerId)
          .setCallStartDateTime(callStartDateTime)
          .setConversionValue(conversionValue)
          .setCurrencyCode("USD");

  if (conversionCustomVariableId != null && conversionCustomVariableValue != null) {
    conversionBuilder.addCustomVariables(
        CustomVariable.newBuilder()
            .setConversionCustomVariable(
                ResourceNames.conversionCustomVariable(customerId, conversionCustomVariableId))
            .setValue(conversionCustomVariableValue));
  }

  // Sets the consent information, if provided.
  if (adUserDataConsent != null) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    conversionBuilder.setConsent(Consent.newBuilder().setAdUserData(adUserDataConsent));
  }

  CallConversion conversion = conversionBuilder.build();

  // Uploads the call conversion to the API.
  try (ConversionUploadServiceClient conversionUploadServiceClient =
      googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
    // Partial failure MUST be enabled for this request.

    // NOTE: This request contains a single conversion as a demonstration.  However, if you have
    // multiple conversions to upload, it's best to upload multiple conversions per request
    // instead of sending a separate request per conversion. See the following for per-request
    // limits:
    // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    UploadCallConversionsResponse response =
        conversionUploadServiceClient.uploadCallConversions(
            UploadCallConversionsRequest.newBuilder()
                .setCustomerId(String.valueOf(customerId))
                .setCustomerId(Long.toString(customerId))
                .addConversions(conversion)
                .setPartialFailure(true)
                .build());

    // Prints any partial failure errors returned.
    if (response.hasPartialFailureError()) {
      GoogleAdsFailure googleAdsFailure =
          ErrorUtils.getInstance().getGoogleAdsFailure(response.getPartialFailureError());
      googleAdsFailure
          .getErrorsList()
          .forEach(e -> System.out.println("Partial failure occurred: " + e.getMessage()));
      throw new RuntimeException(
          "Partial failure occurred " + response.getPartialFailureError().getMessage());
    }

    // Prints the result if valid.
    CallConversionResult result = response.getResults(0);
    System.out.printf(
        "Uploaded call conversion that occurred at '%' for caller ID '%' to the conversion"
            + " action with resource name '%'.%n",
        result.getCallStartDateTime(), result.getCallerId(), result.getConversionAction());
  }
}
UploadCallConversion.java

C#

public void Run(GoogleAdsClient client, long customerId,
    long conversionActionId, string callerId, string callStartTime,
    string conversionTime, double conversionValue,
    long? conversionCustomVariableId, string conversionCustomVariableValue,
    ConsentStatus? adUserDataConsent)
{
    // Get the ConversionUploadService.
    ConversionUploadServiceClient conversionUploadService =
        client.GetService(Services.V17.ConversionUploadService);

    // Create a call conversion by specifying currency as USD.
    CallConversion callConversion = new CallConversion()
    {
        ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId),
        CallerId = callerId,
        CallStartDateTime = callStartTime,
        ConversionDateTime = conversionTime,
        ConversionValue = conversionValue,
        CurrencyCode = "USD",
    };

    if (adUserDataConsent != null)
    {
        // Specifies whether user consent was obtained for the data you are uploading. See
        // https://www.google.com/about/company/user-consent-policy
        // for details.
        callConversion.Consent = new Consent()
        {
            AdUserData = (ConsentStatus)adUserDataConsent
        };
    }

    if (conversionCustomVariableId != null &&
        !string.IsNullOrEmpty(conversionCustomVariableValue))
    {
        callConversion.CustomVariables.Add(new CustomVariable()
        {
            ConversionCustomVariable = ResourceNames.ConversionCustomVariable(
                customerId, conversionCustomVariableId.Value),
            Value = conversionCustomVariableValue
        });
    }

    UploadCallConversionsRequest request = new UploadCallConversionsRequest()
    {
        CustomerId = customerId.ToString(),
        Conversions = { callConversion },
        PartialFailure = true
    };

    try
    {
        // Issues a request to upload the call conversion. The partialFailure parameter
        // is set to true, and validateOnly parameter to false as required by this method
        // call.
        // NOTE: This request contains a single conversion as a demonstration.  However, if
        // you have multiple conversions to upload, it's best to upload multiple conversions
        // per request instead of sending a separate request per conversion. See the
        // following for per-request limits:
        // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
        UploadCallConversionsResponse response =
            conversionUploadService.UploadCallConversions(request);

        // Since we set partialFailure = true, we can retrieve error messages (if any) from
        // the operation response.
        if (response.PartialFailureError != null)
        {
            Console.WriteLine("Call conversion upload failed.");

            // Retrieves the errors from the partial failure and prints them.
            List<GoogleAdsError> errors =
                response.PartialFailure.GetErrorsByOperationIndex(0);
            foreach (GoogleAdsError error in errors)
            {
                Console.WriteLine($"Operation failed with error: {error}.");
            }
        }
        else
        {
            // Prints the result.
            CallConversionResult uploadedCallConversion = response.Results[0];
            Console.WriteLine($"Uploaded call conversion that occurred at " +
                $"'{uploadedCallConversion.CallStartDateTime}' for caller ID " +
                $"'{uploadedCallConversion.CallerId}' to the conversion action with " +
                $"resource name '{uploadedCallConversion.ConversionAction}'.");
        }

    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
UploadCallConversion.cs

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $conversionActionId,
    string $callerId,
    string $callStartDateTime,
    string $conversionDateTime,
    float $conversionValue,
    ?string $conversionCustomVariableId,
    ?string $conversionCustomVariableValue,
    ?int $adUserDataConsent
) {
    // Creates a call conversion by specifying currency as USD.
    $callConversion = new CallConversion([
        'conversion_action' =>
            ResourceNames::forConversionAction($customerId, $conversionActionId),
        'caller_id' => $callerId,
        'call_start_date_time' => $callStartDateTime,
        'conversion_date_time' => $conversionDateTime,
        'conversion_value' => $conversionValue,
        'currency_code' => 'USD'
    ]);
    if (!is_null($conversionCustomVariableId) && !is_null($conversionCustomVariableValue)) {
        $callConversion->setCustomVariables([new CustomVariable([
            'conversion_custom_variable' => ResourceNames::forConversionCustomVariable(
                $customerId,
                $conversionCustomVariableId
            ),
            'value' => $conversionCustomVariableValue
        ])]);
    }
    // Sets the consent information, if provided.
    if (!empty($adUserDataConsent)) {
        // Specifies whether user consent was obtained for the data you are uploading. See
        // https://www.google.com/about/company/user-consent-policy for details.
        $callConversion->setConsent(new Consent(['ad_user_data' => $adUserDataConsent]));
    }

    // Issues a request to upload the call conversion.
    $conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
    // NOTE: This request contains a single conversion as a demonstration.  However, if you have
    // multiple conversions to upload, it's best to upload multiple conversions per request
    // instead of sending a separate request per conversion. See the following for per-request
    // limits:
    // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    $response = $conversionUploadServiceClient->uploadCallConversions(
        // Partial failure MUST be enabled for this request.
        UploadCallConversionsRequest::build($customerId, [$callConversion], true)
    );

    // Prints the status message if any partial failure error is returned.
    // Note: The details of each partial failure error are not printed here, you can refer to
    // the example HandlePartialFailure.php to learn more.
    if ($response->hasPartialFailureError()) {
        printf(
            "Partial failures occurred: '%s'.%s",
            $response->getPartialFailureError()->getMessage(),
            PHP_EOL
        );
    } else {
        // Prints the result if exists.
        /** @var CallConversionResult $uploadedCallConversion */
        $uploadedCallConversion = $response->getResults()[0];
        printf(
            "Uploaded call conversion that occurred at '%s' for caller ID '%s' to the "
            . "conversion action with resource name '%s'.%s",
            $uploadedCallConversion->getCallStartDateTime(),
            $uploadedCallConversion->getCallerId(),
            $uploadedCallConversion->getConversionAction(),
            PHP_EOL
        );
    }
}
UploadCallConversion.php

Python

def main(
    client,
    customer_id,
    conversion_action_id,
    caller_id,
    call_start_date_time,
    conversion_date_time,
    conversion_value,
    conversion_custom_variable_id,
    conversion_custom_variable_value,
    ad_user_data_consent,
):
    """Imports offline call conversion values for calls related to your ads.

    Args:
        client: An initialized GoogleAdsClient instance.
        customer_id: The client customer ID string.
        conversion_action_id: The ID of the conversion action to upload to.
        caller_id: The caller ID from which this call was placed. Caller ID is
            expected to be in E.164 format with preceding '+' sign,
            e.g. '+18005550100'.
        call_start_date_time: The date and time at which the call occurred. The
            format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
            e.g. '2021-01-01 12:32:45-08:00'.
        conversion_date_time: The the date and time of the conversion (should be
            after the click time). The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
            e.g. '2021-01-01 12:32:45-08:00'.
        conversion_value: The conversion value in the desired currency.
        conversion_custom_variable_id: The ID of the conversion custom
            variable to associate with the upload.
        conversion_custom_variable_value: The str value of the conversion custom
            variable to associate with the upload.
        ad_user_data_consent: The consent status for ad user data for all
            members in the job.
    """
    # Get the ConversionUploadService client.
    conversion_upload_service = client.get_service("ConversionUploadService")

    # Create a call conversion in USD currency.
    call_conversion = client.get_type("CallConversion")
    call_conversion.conversion_action = client.get_service(
        "ConversionActionService"
    ).conversion_action_path(customer_id, conversion_action_id)
    call_conversion.caller_id = caller_id
    call_conversion.call_start_date_time = call_start_date_time
    call_conversion.conversion_date_time = conversion_date_time
    call_conversion.conversion_value = conversion_value
    call_conversion.currency_code = "USD"

    if conversion_custom_variable_id and conversion_custom_variable_value:
        conversion_custom_variable = client.get_type("CustomVariable")
        conversion_custom_variable.conversion_custom_variable = (
            conversion_custom_variable_id
        )
        conversion_custom_variable.value = conversion_custom_variable_value
        call_conversion.custom_variables.append(conversion_custom_variable)

    # Specifies whether user consent was obtained for the data you are
    # uploading. For more details. see:
    # https://www.google.com/about/company/user-consent-policy
    if ad_user_data_consent:
        call_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
            ad_user_data_consent
        ]

    # Issue a request to upload the call conversion.
    # Partial failure MUST be enabled for this request.
    request = client.get_type("UploadCallConversionsRequest")
    request.customer_id = customer_id
    request.conversions = [call_conversion]
    request.partial_failure = True
    # NOTE: This request only uploads a single conversion, but if you have
    # multiple conversions to upload, it's most efficient to upload them in a
    # single request. See the following for per-request limits for reference:
    # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    upload_call_conversions_response = (
        conversion_upload_service.upload_call_conversions(request=request)
    )

    # Print any partial errors returned.
    if upload_call_conversions_response.partial_failure_error:
        print(
            "Partial error occurred: "
            f"'{upload_call_conversions_response.partial_failure_error.message}'"
        )

    # Print the result if valid.
    uploaded_call_conversion = upload_call_conversions_response.results[0]
    if uploaded_call_conversion.call_start_date_time:
        print(
            "Uploaded call conversion that occurred at "
            f"'{uploaded_call_conversion.call_start_date_time}' "
            f"for caller ID '{uploaded_call_conversion.caller_id}' "
            "to the conversion action with resource name "
            f"'{uploaded_call_conversion.conversion_action}'."
        )
upload_call_conversion.py

Ruby

def upload_call_conversion(
  customer_id,
  conversion_action_id,
  caller_id,
  call_start_date_time,
  conversion_date_time,
  conversion_value,
  conversion_custom_variable_id,
  conversion_custom_variable_value,
  ad_user_data_consent)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new

  # Create a call conversion by specifying currency as USD.
  call_conversion = client.resource.call_conversion do |c|
    c.conversion_action = client.path.conversion_action(
      customer_id, conversion_action_id)
    c.caller_id = caller_id
    c.call_start_date_time = call_start_date_time
    c.conversion_date_time = conversion_date_time
    c.conversion_value = conversion_value
    c.currency_code = "USD"
    if conversion_custom_variable_id && conversion_custom_variable_value
      c.custom_variables << client.resource.custom_variable do |cv|
        cv.conversion_custom_variable = client.path.conversion_custom_variable(
          customer_id, conversion_custom_variable_id)
        cv.value = conversion_custom_variable_value
      end
    end

    unless ad_user_data_consent.nil?
      c.consent = client.resource.consent do |c|
        # Specifies whether user consent was obtained for the data you are
        # uploading. For more details, see:
        # https://www.google.com/about/company/user-consent-policy
        c.ad_user_data = ad_user_data_consent
      end
    end
  end

  # Issues a request to upload the call conversion.
  response = client.service.conversion_upload.upload_call_conversions(
    customer_id: customer_id,
    # NOTE: This request only uploads a single conversion, but if you have
    # multiple conversions to upload, it's most efficient to upload them in a
    # single request. See the following for per-request limits for reference:
    # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    conversions: [call_conversion],
    partial_failure: true
  )

  # Prints errors if any partial failure error is returned.
  if response.partial_failure_error
    failures = client.decode_partial_failure_error(response.partial_failure_error)
    failures.each do |failure|
      failure.errors.each do |error|
        human_readable_error_path = error
          .location
          .field_path_elements
          .map { |location_info|
            if location_info.index
              "#{location_info.field_name}[#{location_info.index}]"
            else
              "#{location_info.field_name}"
            end
          }.join(" > ")

        errmsg =  "error occured while adding operations " \
          "#{human_readable_error_path}" \
          " with value: #{error.trigger.string_value}" \
          " because #{error.message.downcase}"
        puts errmsg
      end
    end
  else
    # Print the result if valid.
    uploaded_call_conversion = response.results.first
    puts "Uploaded call conversion that occurred at " \
      "#{uploaded_call_conversion.call_start_date_time} " \
      "for caller ID " \
      "#{uploaded_call_conversion.caller_id} " \
      "to the conversion action with resource name " \
      "#{uploaded_call_conversion.conversion_action}"
  end
end
upload_call_conversion.rb

Perl

sub upload_call_conversion {
  my (
    $api_client,                       $customer_id,
    $conversion_action_id,             $caller_id,
    $call_start_date_time,             $conversion_date_time,
    $conversion_value,                 $conversion_custom_variable_id,
    $conversion_custom_variable_value, $ad_user_data_consent
  ) = @_;

  # Create a call conversion by specifying currency as USD.
  my $call_conversion =
    Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CallConversion
    ->new({
      conversionAction =>
        Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action(
        $customer_id, $conversion_action_id
        ),
      callerId           => $caller_id,
      callStartDateTime  => $call_start_date_time,
      conversionDateTime => $conversion_date_time,
      conversionValue    => $conversion_value,
      currencyCode       => "USD"
    });

  if ($conversion_custom_variable_id && $conversion_custom_variable_value) {
    $call_conversion->{customVariables} = [
      Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CustomVariable
        ->new({
          conversionCustomVariable =>
            Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_custom_variable(
            $customer_id, $conversion_custom_variable_id
            ),
          value => $conversion_custom_variable_value
        })];
  }

  # Set the consent information, if provided.
  if ($ad_user_data_consent) {
    # Specify whether user consent was obtained for the data you are uploading.
    # See https://www.google.com/about/company/user-consent-policy for details.
    $call_conversion->{consent} =
      Google::Ads::GoogleAds::V17::Common::Consent->new({
        adUserData => $ad_user_data_consent
      });
  }

  # Issue a request to upload the call conversion.
  # NOTE: This request contains a single conversion as a demonstration.
  # However, if you have multiple conversions to upload, it's best to
  # upload multiple conversions per request instead of sending a separate
  # request per conversion. See the following for per-request limits:
  # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  my $upload_call_conversions_response =
    $api_client->ConversionUploadService()->upload_call_conversions({
      customerId     => $customer_id,
      conversions    => [$call_conversion],
      partialFailure => "true"
    });

  # Print any partial errors returned.
  if ($upload_call_conversions_response->{partialFailureError}) {
    printf "Partial error encountered: '%s'.\n",
      $upload_call_conversions_response->{partialFailureError}{message};
  }

  # Print the result if valid.
  my $uploaded_call_conversion =
    $upload_call_conversions_response->{results}[0];
  if (%$uploaded_call_conversion) {
    printf "Uploaded call conversion that occurred at '%s' " .
      "for caller ID '%s' to the conversion action with resource name '%s'.\n",
      $uploaded_call_conversion->{callStartDateTime},
      $uploaded_call_conversion->{callerId},
      $uploaded_call_conversion->{conversionAction};
  }

  return 1;
}
upload_call_conversion.pl

Önceki
Tıklama dönüşümlerini yükleme
Sonraki
Mağaza satış dönüşümlerini yükleme