Veri Hariç Tutmaları Oluşturma

Veri hariç tutmaları, Akıllı Teklif'e bilgi vermek için kullanılabilecek gelişmiş bir araçtır. bir hesabın dönüşümüyle ilgili sorun olduğu tarihlere ait tüm verileri yoksayma izleyebilirsiniz. Veri hariç tutmalarının işleyiş şekli hakkında daha fazla bilgi için veri hariç tutmaları ile ilgili yardım sayfamızı ziyaret edin.

Aşağıdakileri kullanarak verileri programatik olarak hariç tutma: BiddingDataExclusions.

Kapsam

BiddingDataExclusions için zorunlu scope değerler oluşturabilirsiniz. Kapsama özel ek yapılandırma seçenekleri ayarlandı belirleneceğini konuşacağız.

  • CAMPAIGN - Hariç tutma belirli kampanyalara uygulanır. Ayarlayın: campaigns alanı kampanya kaynağı adlarının listesine eklenir. geçerlidir.
    • BiddingDataExclusion başına maksimum kampanya sayısı 2.000'dir.
  • CHANNEL - Hariç tutma, belirli bir kampanyaya ait kampanyalara uygulanır kanal türlerine göre değiştirilebilir. Ayarlayın: advertising_channel_types alanını bu AdvertisingChannelTypes öğesinin bir listesine hariç tutma işlemleri geçerli olur.

Cihazlar

Veri hariç tutmaları, kapsamlarının yanı sıra isteğe bağlı hariç tutmanın uygulanacağı cihaz türlerinin listesi. Eğer devices ayarlandı, yalnızca dönüşüm Belirtilen cihaz türlerinden veriler hariç tutulur. Belirtilmezse dönüşüm tüm cihaz türlerinden gelen veriler hariç tutulacaktır.

Tarihler ve saatler

Kapsam ve isteğe bağlı cihazlar dışında, her veri hariç tutma işleminin bir başlangıcı olmalıdır. bitiş tarihi ve saati. Verileri hariç tutma geriye dönüktür ve kullanılmalıdır. daha küçük bir start_date_time geçmiş ve end_date_time geçmiş ya da gelecekte olur. Saatler hesabın saat dilimindedir.

Örnek

Aşağıdaki örnekte, CHANNEL kapsamıyla verileri hariç tutma işleminin nasıl oluşturulacağı gösterilmektedir. Açıklama yapılan bölümlerde, açılış sayfanızı bunun yerine bir CAMPAIGN kapsamı ayarlayın.

Java

BiddingDataExclusion DataExclusion =
    BiddingDataExclusion.newBuilder()
        // A unique name is required for every data exclusion.
        .setName("Data exclusion #" + getPrintableDateTime())
        // The CHANNEL scope applies the data exclusion to all campaigns of specific
        // advertising channel types. In this example, the exclusion will only apply to
        // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
        // campaigns.
        .setScope(SeasonalityEventScope.CHANNEL)
        .addAdvertisingChannelTypes(AdvertisingChannelType.SEARCH)
        // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
        // the commented out line below.
        // .addCampaigns("INSERT_CAMPAIGN_RESOURCE_NAME_HERE")
        .setStartDateTime(startDateTime)
        .setEndDateTime(endDateTime)
        .build();

BiddingDataExclusionOperation operation =
    BiddingDataExclusionOperation.newBuilder().setCreate(DataExclusion).build();

MutateBiddingDataExclusionsResponse response =
    DataExclusionServiceClient.mutateBiddingDataExclusions(
        customerId.toString(), ImmutableList.of(operation));
System.out.printf(
    "Added data exclusion with resource name: %s%n",
    response.getResults(0).getResourceName());
AddBiddingDataExclusion.java

C#

BiddingDataExclusion dataExclusion = new BiddingDataExclusion()
{
    // A unique name is required for every data exclusion.
    Name = "Data exclusion #" + ExampleUtilities.GetRandomString(),
    // The CHANNEL scope applies the data exclusion to all campaigns of specific
    // advertising channel types. In this example, the the exclusion will only apply to
    // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
    // campaigns.
    Scope = SeasonalityEventScope.Channel,
    AdvertisingChannelTypes = { AdvertisingChannelType.Search },
    // The date range should be less than 14 days.
    StartDateTime = startDateTime,
    EndDateTime = endDateTime,
};
BiddingDataExclusionOperation operation = new BiddingDataExclusionOperation()
{
    Create = dataExclusion
};

try
{
    MutateBiddingDataExclusionsResponse response =
        biddingDataExclusionService.MutateBiddingDataExclusions(
            customerId.ToString(), new[] { operation });
    Console.WriteLine($"Added data exclusion with resource name: " +
        $"{response.Results[0].ResourceName}");
}
catch (GoogleAdsException e)
{
    Console.WriteLine("Failure:");
    Console.WriteLine($"Message: {e.Message}");
    Console.WriteLine($"Failure: {e.Failure}");
    Console.WriteLine($"Request ID: {e.RequestId}");
    throw;
}
AddBiddingDataExclusion.cs

PHP

// Creates a bidding data exclusion.
$dataExclusion = new BiddingDataExclusion([
    // A unique name is required for every data exclusion.
    'name' => 'Data exclusion #' . Helper::getPrintableDatetime(),
    // The CHANNEL scope applies the data exclusion to all campaigns of specific
    // advertising channel types. In this example, the exclusion will only apply to
    // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
    // campaigns.
    'scope' => SeasonalityEventScope::CHANNEL,
    'advertising_channel_types' => [AdvertisingChannelType::SEARCH],
    // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
    // the commented out line below.
    // 'campaigns' => ['INSERT_CAMPAIGN_RESOURCE_NAME_HERE'],
    'start_date_time' => $startDateTime,
    'end_date_time' => $endDateTime
]);

// Creates a bidding data exclusion operation.
$biddingDataExclusionOperation = new BiddingDataExclusionOperation();
$biddingDataExclusionOperation->setCreate($dataExclusion);

// Submits the bidding data exclusion operation to add the bidding data exclusion.
$biddingDataExclusionServiceClient =
    $googleAdsClient->getBiddingDataExclusionServiceClient();
$response = $biddingDataExclusionServiceClient->mutateBiddingDataExclusions(
    MutateBiddingDataExclusionsRequest::build($customerId, [$biddingDataExclusionOperation])
);

printf(
    "Added bidding data exclusion with resource name: '%s'.%s",
    $response->getResults()[0]->getResourceName(),
    PHP_EOL
);
AddBiddingDataExclusion.php

Python

bidding_data_exclusion_service = client.get_service(
    "BiddingDataExclusionService"
)
operation = client.get_type("BiddingDataExclusionOperation")
bidding_data_exclusion = operation.create
# A unique name is required for every data exclusion
bidding_data_exclusion.name = f"Data exclusion #{uuid4()}"
# The CHANNEL scope applies the data exclusion to all campaigns of specific
# advertising channel types. In this example, the exclusion will only
# apply to Search campaigns. Use the CAMPAIGN scope to instead limit the
# scope to specific campaigns.
bidding_data_exclusion.scope = (
    client.enums.SeasonalityEventScopeEnum.CHANNEL
)
bidding_data_exclusion.advertising_channel_types.append(
    client.enums.AdvertisingChannelTypeEnum.SEARCH
)
# If setting scope CAMPAIGN, add individual campaign resource name(s)
# according to the commented out line below.
#
# bidding_data_exclusion.campaigns.append(
#     "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"
# )

bidding_data_exclusion.start_date_time = start_date_time
bidding_data_exclusion.end_date_time = end_date_time

response = bidding_data_exclusion_service.mutate_bidding_data_exclusions(
    customer_id=customer_id, operations=[operation]
)

resource_name = response.results[0].resource_name

print(f"Added data exclusion with resource name: '{resource_name}'")
add_bidding_data_exclusion.py

Ruby

client = Google::Ads::GoogleAds::GoogleAdsClient.new

operation = client.operation.create_resource.bidding_data_exclusion do |bda|
  # A unique name is required for every data excluseion.
  bda.name = "Seasonality Adjustment #{(Time.new.to_f * 1000).to_i}"

  # The CHANNEL scope applies the data exclusion to all campaigns of specific
  # advertising channel types. In this example, the conversion_rate_modifier
  # will only apply to Search campaigns. Use the CAMPAIGN scope to instead
  # limit the scope to specific campaigns.
  bda.scope = :CHANNEL
  bda.advertising_channel_types << :SEARCH

  # If setting scope CAMPAIGN, add individual campaign resource name(s)
  # according to the commented out line below.
  #
  # bda.campaigns << "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"

  bda.start_date_time = start_date_time
  bda.end_date_time = end_date_time
end

response = client.service.bidding_data_exclusion.mutate_bidding_data_exclusions(
  customer_id: customer_id,
  operations: [operation],
)

puts "Added data exclusion with resource name #{response.results.first.resource_name}."
add_bidding_data_exclusion.rb

Perl

my $data_exclusion =
  Google::Ads::GoogleAds::V17::Resources::BiddingDataExclusion->new({
    # A unique name is required for every data exclusion.
    name => "Data exclusion #" . uniqid(),
    # The CHANNEL scope applies the data exclusion to all campaigns of specific
    # advertising channel types. In this example, the exclusion will only apply
    # to Search campaigns. Use the CAMPAIGN scope to instead limit the scope to
    # specific campaigns.
    scope                   => CHANNEL,
    advertisingChannelTypes => [SEARCH],
    # If setting scope CAMPAIGN, add individual campaign resource name(s)
    # according to the commented out line below.
    # campaigns     => ["INSERT_CAMPAIGN_RESOURCE_NAME_HERE"],
    startDateTime => $start_date_time,
    endDateTime   => $end_date_time
  });

my $operation =
  Google::Ads::GoogleAds::V17::Services::BiddingDataExclusionService::BiddingDataExclusionOperation
  ->new({
    create => $data_exclusion
  });

my $response = $api_client->BiddingDataExclusionService()->mutate({
    customerId => $customer_id,
    operations => [$operation]});

printf "Added data exclusion with resource name: '%s'.\n",
  $response->{results}[0]{resourceName};
add_bidding_data_exclusion.pl

Önceki
Sezon ayarlaması oluşturma