Dönemlik Ayarlamalar Oluşturun

Önemli Nokta: Dönemlik ayarlamalar, 1 ila 7 günlük kısa etkinlikler için idealdir. Kendisine uzun dönemler (tek seferde 14 günden fazla) için kullanırsanız dikkat edebilir).

Dönemlik ayarlamalar, Akıllı Teklif stratejilerinizi bilgilendirmek için kullanılabilecek gelişmiş bir araçtır. Yaklaşan etkinlikler için dönüşüm oranlarında beklenen değişiklikler için teklif verme. Örneğin, dönemlik ayarlamaların işleyiş şekli hakkında daha fazla bilgi için dönemlik ayarlama ayarlamalar yardım sayfasını ziyaret edin.

Dönemlik ayarlamayı programatik olarak oluşturmak için: BiddingSeasonalityAdjustments.

Kapsam

BiddingSeasonalityAdjustments için zorunlu Şu şekilde ayarlanabilen scope: aşağıdaki değerlere sahiptir. Kapsama özel ek yapılandırma seçenekleri ayarlandı belirleneceğini konuşacağız.

Not: Ayrıca salt okunur bir CUSTOMER kapsamı da vardır ancak bu kapsam kullanılamaz yeni dönemlik ayarlamalar oluşturabilirsiniz.

• CAMPAIGN: Düzenleme belirli kampanyalara uygulanır. Ayarlayın: campaigns alan adını, bu kampanyanın kaynak adları listesine düzenleme uygulanacak.
  • BiddingSeasonalityAdjustment başına maksimum kampanya sayısı 2.000'dir.
• CHANNEL - Düzenleme, belirli bir kampanyaya ait kanal türlerine göre değiştirilebilir. Ayarlayın: advertising_channel_types alanını bu AdvertisingChannelTypes öğesinin bir listesine düzenleme uygulanacak.

Cihazlar

Dönemlik ayarlamalar, kapsamlarının yanı sıra düzenlemenin uygulanacağı cihaz türlerinin isteğe bağlı listesi Eğer devices ayarlandığında dönemlik ayarlama yalnızca belirtilen cihazdan gelen trafiğe uygulanır bulunur. Belirtilmezse tüm cihaz türleri ayarlamaya dahil edilir.

Tarihler, saatler ve dönüşüm oranı değiştirici

Kapsam ve isteğe bağlı cihazların yanı sıra her dönemlik ayarlamanın start_date_time ve end_date_time ve conversion_rate_modifier. Tarih ve saatler, düzenlemenin geçerli olacağı gelecekteki aralığı tanımlar. değiştirici ise uygulanması beklenen dönüşüm oranı çarpanıdır. Tarih saatleri hesabın saat dilimindedir.

Not: conversion_rate_modifier değeri 0.1 ile 10.0 arasında olmalıdır işlevi görür. Örneğin, 1.0 değiştirici değeri düzenleme yapılmayacağı anlamına gelir olacaktır.

Örnek

Aşağıdaki örnekte, CHANNEL kapsamı. Açıklamalı bölümlerde, aşağıdaki durumlarda kampanyaların nasıl belirtileceği bunun yerine CAMPAIGN kapsamı ayarlamalısınız.

Java

BiddingSeasonalityAdjustment seasonalityAdjustment =
    BiddingSeasonalityAdjustment.newBuilder()
        // A unique name is required for every seasonality adjustment.
        .setName("Seasonality adjustment #" + getPrintableDateTime())
        // The CHANNEL scope applies the conversionRateModifier to all campaigns of specific
        // advertising channel types. In this example, the conversionRateModifier will only
        // apply to Search campaigns. Use the CAMPAIGN scope to instead limit the scope to
        // specific campaigns.
        .setScope(SeasonalityEventScope.CHANNEL)
        .addAdvertisingChannelTypes(AdvertisingChannelType.SEARCH)
        // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
        // the commented out line below.
        // .addCampaigns("INSERT_CAMPAIGN_RESOURCE_NAME_HERE")
        .setStartDateTime(startDateTime)
        .setEndDateTime(endDateTime)
        // The conversionRateModifier is the expected future conversion rate change. When this
        // field is unset or set to 1.0, no adjustment will be applied to traffic. The allowed
        // range is 0.1 to 10.0.
        .setConversionRateModifier(conversionRateModifier)
        .build();

BiddingSeasonalityAdjustmentOperation operation =
    BiddingSeasonalityAdjustmentOperation.newBuilder()
        .setCreate(seasonalityAdjustment)
        .build();

MutateBiddingSeasonalityAdjustmentsResponse response =
    seasonalityAdjustmentServiceClient.mutateBiddingSeasonalityAdjustments(
        customerId.toString(), ImmutableList.of(operation));
System.out.printf(
    "Added seasonality adjustment with resource name: %s%n",
    response.getResults(0).getResourceName());
AddBiddingSeasonalityAdjustment.java
      

C#

BiddingSeasonalityAdjustment seasonalityAdjustment =
    new BiddingSeasonalityAdjustment()
    {
        // A unique name is required for every seasonality adjustment.
        Name = "Seasonality adjustment #" + ExampleUtilities.GetRandomString(),
        // The CHANNEL scope applies the conversionRateModifier to all campaigns of
        // specific advertising channel types. In this example, the
        // conversionRateModifier will only apply to Search campaigns. Use the
        // CAMPAIGN scope to instead limit the scope to specific campaigns.
        Scope = SeasonalityEventScope.Channel,
        AdvertisingChannelTypes = { AdvertisingChannelType.Search },
        // If setting scope CAMPAIGN, add individual campaign resource name(s)
        // according to the commented out line below.
        // Campaigns = { "INSERT_CAMPAIGN_RESOURCE_NAME_HERE" },
        // The date range should be less than 14 days.
        StartDateTime = startDateTime,
        EndDateTime = endDateTime,
        // The conversionRateModifier is the expected future conversion rate change.
        // When this field is unset or set to 1.0, no adjustment will be applied to
        // traffic. The allowed range is 0.1 to 10.0.
        ConversionRateModifier = conversionRateModifier
    };

BiddingSeasonalityAdjustmentOperation operation =
    new BiddingSeasonalityAdjustmentOperation()
    {
        Create = seasonalityAdjustment
    };

try
{
    MutateBiddingSeasonalityAdjustmentsResponse response =
        biddingSeasonalityAdjustmentService.MutateBiddingSeasonalityAdjustments(
            customerId.ToString(), new[] { operation });
    Console.WriteLine($"Added seasonality adjustment with resource name: " +
        $"{response.Results[0].ResourceName}");
}
catch (GoogleAdsException e)
{
    Console.WriteLine("Failure:");
    Console.WriteLine($"Message: {e.Message}");
    Console.WriteLine($"Failure: {e.Failure}");
    Console.WriteLine($"Request ID: {e.RequestId}");
    throw;
}
AddBiddingSeasonalityAdjustment.cs
      

PHP

// Creates a bidding seasonality adjustment.
$seasonalityAdjustment = new BiddingSeasonalityAdjustment([
    // A unique name is required for every seasonality adjustment.
    'name' => 'Seasonality adjustment #' . Helper::getPrintableDatetime(),
    // The CHANNEL scope applies the conversionRateModifier to all campaigns of specific
    // advertising channel types. In this example, the conversionRateModifier will only
    // apply to Search campaigns. Use the CAMPAIGN scope to instead limit the scope to
    // specific campaigns.
    'scope' => SeasonalityEventScope::CHANNEL,
    'advertising_channel_types' => [AdvertisingChannelType::SEARCH],
    // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
    // the commented out line below.
    // 'campaigns' => ['INSERT_CAMPAIGN_RESOURCE_NAME_HERE'],
    'start_date_time' => $startDateTime,
    'end_date_time' => $endDateTime,
    // The conversionRateModifier is the expected future conversion rate change. When this
    // field is unset or set to 1.0, no adjustment will be applied to traffic. The allowed
    // range is 0.1 to 10.0.
    'conversion_rate_modifier' => $conversionRateModifier
]);

// Creates a bidding seasonality adjustment operation.
$biddingSeasonalityAdjustmentOperation = new BiddingSeasonalityAdjustmentOperation();
$biddingSeasonalityAdjustmentOperation->setCreate($seasonalityAdjustment);

// Submits the bidding seasonality adjustment operation to add the bidding seasonality
// adjustment.
$biddingSeasonalityAdjustmentServiceClient =
    $googleAdsClient->getBiddingSeasonalityAdjustmentServiceClient();
$response = $biddingSeasonalityAdjustmentServiceClient->mutateBiddingSeasonalityAdjustments(
    MutateBiddingSeasonalityAdjustmentsRequest::build(
        $customerId,
        [$biddingSeasonalityAdjustmentOperation]
    )
);

printf(
    "Added seasonality adjustment with resource name: '%s'.%s",
    $response->getResults()[0]->getResourceName(),
    PHP_EOL
);
AddBiddingSeasonalityAdjustment.php
      

Python

bidding_seasonality_adjustment_service = client.get_service(
    "BiddingSeasonalityAdjustmentService"
)
operation = client.get_type("BiddingSeasonalityAdjustmentOperation")
bidding_seasonality_adjustment = operation.create
# A unique name is required for every seasonality adjustment.
bidding_seasonality_adjustment.name = f"Seasonality adjustment #{uuid4()}"
# The CHANNEL scope applies the conversion_rate_modifier to all campaigns of
# specific advertising channel types. In this example, the
# conversion_rate_modifier will only apply to Search campaigns. Use the
# CAMPAIGN scope to instead limit the scope to specific campaigns.
bidding_seasonality_adjustment.scope = (
    client.enums.SeasonalityEventScopeEnum.CHANNEL
)
bidding_seasonality_adjustment.advertising_channel_types.append(
    client.enums.AdvertisingChannelTypeEnum.SEARCH
)
# If setting scope CAMPAIGN, add individual campaign resource name(s)
# according to the commented out line below.
#
# bidding_seasonality_adjustment.campaigns.append(
#     "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"
# )

bidding_seasonality_adjustment.start_date_time = start_date_time
bidding_seasonality_adjustment.end_date_time = end_date_time
# The conversion_rate_modifier is the expected future conversion rate
# change. When this field is unset or set to 1.0, no adjustment will be
# applied to traffic. The allowed range is 0.1 to 10.0.
bidding_seasonality_adjustment.conversion_rate_modifier = (
    conversion_rate_modifier
)

response = bidding_seasonality_adjustment_service.mutate_bidding_seasonality_adjustments(
    customer_id=customer_id, operations=[operation]
)

resource_name = response.results[0].resource_name

print(f"Added seasonality adjustment with resource name: '{resource_name}'")
add_bidding_seasonality_adjustment.py
      

Ruby

client = Google::Ads::GoogleAds::GoogleAdsClient.new

operation = client.operation.create_resource.bidding_seasonality_adjustment do |bsa|
  # A unique name is required for every seasonality adjustment.
  bsa.name = "Seasonality Adjustment #{(Time.new.to_f * 1000).to_i}"

  # The CHANNEL scope applies the conversion_rate_modifier to all campaigns
  # of specific advertising channel types. In this example, the
  # conversion_rate_modifier will only apply to Search campaigns. Use the
  # CAMPAIGN scope to instead limit the scope to specific campaigns.
  bsa.scope = :CHANNEL
  bsa.advertising_channel_types << :SEARCH

  # If setting scope CAMPAIGN, add individual campaign resource name(s)
  # according to the commented out line below.
  #
  # bsa.campaigns << "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"

  bsa.start_date_time = start_date_time
  bsa.end_date_time = end_date_time

  # The conversion_rate_modifier is the expected future conversion rate
  # change. When this field is unset or set to 1.0, no adjustment will be
  # applied to traffic. The allowed range is 0.1 to 10.0.
  bsa.conversion_rate_modifier = conversion_rate_modifier
end

response = client.service.bidding_seasonality_adjustment.mutate_bidding_seasonality_adjustments(
  customer_id: customer_id,
  operations: [operation],
)

puts "Added seasonality adjustment with resource name #{response.results.first.resource_name}"
add_bidding_seasonality_adjustment.rb
      

Perl

my $seasonality_adjustment =
  Google::Ads::GoogleAds::V17::Resources::BiddingSeasonalityAdjustment->new({
    # A unique name is required for every seasonality adjustment.
    name => "Seasonality adjustment #" . uniqid(),
    # The CHANNEL scope applies the conversion_rate_modifier to all campaigns
    # of specific advertising channel types. In this example, the conversion_rate_modifier
    # will only apply to Search campaigns. Use the CAMPAIGN scope to instead
    # limit the scope to specific campaigns.
    scope                   => CHANNEL,
    advertisingChannelTypes => [SEARCH],
    # If setting scope CAMPAIGN, add individual campaign resource name(s)
    # according to the commented out line below.
    # campaigns     => ["INSERT_CAMPAIGN_RESOURCE_NAME_HERE"],
    startDateTime => $start_date_time,
    endDateTime   => $end_date_time,
    # The conversion_rate_modifier is the expected future conversion rate change.
    # When this field is unset or set to 1.0, no adjustment will be applied to traffic.
    # The allowed range is 0.1 to 10.0.
    conversionRateModifier => $conversion_rate_modifier
  });

my $operation =
  Google::Ads::GoogleAds::V17::Services::BiddingSeasonalityAdjustmentService::BiddingSeasonalityAdjustmentOperation
  ->new({
    create => $seasonality_adjustment
  });

my $response = $api_client->BiddingSeasonalityAdjustmentService()->mutate({
    customerId => $customer_id,
    operations => [$operation]});

printf "Added seasonality adjustment with resource name: '%s'.\n",
  $response->{results}[0]{resourceName};
add_bidding_seasonality_adjustment.pl