खास कार्रवाइयां करने वाले विज़िटर

अपनी ऑडियंस सूची में उन लोगों को जोड़ा जा सकता है जिन्होंने आपकी वेबसाइट पर कोई खास कार्रवाई की है. अगर कन्वर्ज़न ट्रैकिंग का इस्तेमाल किया जा रहा है, तो विज्ञापनों को उन लोगों पर टारगेट किया जा सकता है जिन्होंने पहले ही आपकी वेबसाइट पर कन्वर्ज़न (जैसे कि खरीदारी) को ट्रिगर किया था.

विज्ञापनों को उन लोगों को भी टारगेट किया जा सकता है जिन्होंने आपकी वेबसाइट पर कोई ऐसी कार्रवाई की हो जिसे आपने कन्वर्ज़न नहीं माना हो. जैसे, जब कोई व्यक्ति खरीदारी किए बिना, अपने शॉपिंग कार्ट से कोई आइटम जोड़ता है और फिर उसे मिटा देता है.

ज़रूरी शर्तें

ऑडियंस सेगमेंट बनाने और उन्हें टारगेट करने के लिए, आपको सबसे पहले:

1. दिलचस्पी और जगह के आधार पर विज्ञापन दिखाने से जुड़ी नीति देखें. ऑडियंस बनाने के लिए, उपयोगकर्ताओं की संवेदनशील जानकारी का इस्तेमाल नहीं किया जा सकता.

2. अपना Google टैग सेट अप करें.

   मोबाइल ऐप्लिकेशन के व्यवहार के आधार पर उपयोगकर्ता सूचियां बनाने के लिए, विज्ञापन देने वाले लोगों या कंपनियों को Firebase SDK टूल लागू करना चाहिए. इसके अलावा, ऐप्लिकेशन में उपयोगकर्ता के व्यवहार को ट्रैक करने के लिए, तीसरे पक्ष के SDK टूल का इस्तेमाल भी किया जा सकता है.

1. कन्वर्ज़न ट्रैकिंग सेट अप करें कन्वर्ज़न मैनेजमेंट की शुरू करने की गाइड में दिए गए निर्देशों का पालन करें. इसके बाद, अपनी वेबसाइट पर Google टैग इंस्टॉल करें.

Google टैग वापस पाना

सभी Google Ads खातों में, खाता-लेवल पर एक Google टैग होता है. यह खाता खुलने पर अपने-आप बन जाता है.

Google Ads यूज़र इंटरफ़ेस (यूआई) में Google टैग को वापस पाने के लिए, सहायता केंद्र के निर्देशों का पालन करें. इसके अलावा, Google Ads API में RemarketingAction बनाकर और फिर remarketing_action संसाधन का इस्तेमाल करके GoogleAdsService.searchStream अनुरोध जारी करके, Google टैग को वापस पाया जा सकता है:

SELECT
  remarketing_action.id,
  remarketing_action.name,
  remarketing_action.tag_snippets
FROM remarketing_action
WHERE remarketing_action.resource_name = 'REMARKETING_ACTION_RESOURCE_NAME'

अपनी वेबसाइट या ऐप्लिकेशन पर Google टैग इंस्टॉल करना

अगले चरण में, अपनी साइट के सभी पेजों पर Google टैग इंस्टॉल करें. अपनी साइट या मोबाइल ऐप्लिकेशन में Google टैग जोड़ने के बारे में ज़्यादा जानें.

अगर आपको सिर्फ़ देखे गए पेज के यूआरएल के आधार पर ऑडियंस सेगमेंट बनाने हैं, तो आपको अपने Google टैग में कोई बदलाव करने की ज़रूरत नहीं है. अगर कस्टम पैरामीटर का इस्तेमाल किया जा रहा है, तो उन्हें शामिल करने के लिए आपको अपने टैग में बदलाव करना होगा. इस बारे में ज़्यादा जानकारी, टैग करने और रीमार्केटिंग सूचियां बनाने के लिए बेहतर रणनीतियां में दी गई है.

टैग इंस्टॉल होने की पुष्टि करने के लिए, Google Tag Assistant का इस्तेमाल किया जा सकता है.

Google टैग में पहले से मौजूद पैरामीटर

आपकी वेबसाइट पर आने वाले लोगों के यूआरएल के आधार पर, उपयोगकर्ता सूची को टारगेट करने के लिए, पहले से मौजूद रीमार्केटिंग पैरामीटर url__ का इस्तेमाल किया जा सकता है. इस बारे में आपकी वेबसाइट पर आने वाले लोगों के उदाहरण में बताया गया है.

कस्टम Google टैग पैरामीटर

ज़्यादा उपयोगकर्ता सूचियां बनाने के लिए, अपने Google टैग में कस्टम Google टैग पैरामीटर जोड़े जा सकते हैं.

अपने कस्टम पैरामीटर बनाने से पहले, पहले से तय पैरामीटर की सूची देखें. इससे आपको पता चलेगा कि आपके इस्तेमाल के उदाहरण के लिए, पहले से कोई पैरामीटर उपलब्ध है या नहीं. पहले से तय पैरामीटर का इस्तेमाल करने से, Google Ads की दूसरी रीमार्केटिंग सुविधाओं के साथ इंटिग्रेट करना आसान हो जाता है.

उपयोगकर्ता सूची बनाना

वेबसाइट पर आने वाले जिन लोगों ने कुछ खास कार्रवाइयां की हैं उन्हें टारगेट करने के लिए, UserList के basic_user_list फ़ील्ड को BasicUserListInfo ऑब्जेक्ट के साथ सेट करना होगा. इसमें आपकी ओर से टारगेट की जा रही कार्रवाइयों के रेफ़रंस शामिल होंगे. जैसे, कन्वर्ज़न या नॉन-कन्वर्ज़न ऐक्शन.

कन्वर्ज़न और नॉन-कन्वर्ज़न ऐक्शन के कॉम्बिनेशन के आधार पर उपयोगकर्ताओं को टारगेट करने के उदाहरण के बारे में पूरी जानकारी पाने के लिए, उदाहरण के तौर पर दी गई स्थिति देखें.

कन्वर्ज़न ट्रिगर करने वाले विज़िटर

उपयोगकर्ताओं की बुनियादी सूची में, उन लोगों को सदस्य माना जाता है जिन्होंने आपकी वेबसाइट पर एक या उससे ज़्यादा कन्वर्ज़न ऐक्शन ट्रिगर किए हैं. उपयोगकर्ता की बुनियादी सूची बनाते समय, UserListActionInfo ऑब्जेक्ट को ConversionAction के संसाधन का नाम दिया जाता है. इसे आखिर में UserList को पास किया जाता है.

नीचे दिए गए उदाहरण में, दो मौजूदा कन्वर्ज़न ऐक्शन से जुड़ी उपयोगकर्ताओं की बुनियादी सूची बनाई गई है:

Java

private void runExample(
    GoogleAdsClient googleAdsClient, long customerId, List<Long> conversionActionIds) {
  List<UserListActionInfo> userListActionInfoList = new ArrayList<>();
  for (long conversionActionId : conversionActionIds) {
    // Creates the UserListActionInfo object for a given conversion action. This specifies the
    // conversion action that, when triggered, will cause a user to be added to a UserList.
    UserListActionInfo userListActionInfo =
        UserListActionInfo.newBuilder()
            .setConversionAction(ResourceNames.conversionAction(customerId, conversionActionId))
            .build();
    userListActionInfoList.add(userListActionInfo);
  }

  // Creates a basic user list info object with all of the conversion actions.
  BasicUserListInfo basicUserListInfo =
      BasicUserListInfo.newBuilder().addAllActions(userListActionInfoList).build();

  // Creates the basic user list.
  UserList basicUserList =
      UserList.newBuilder()
          .setName("Example BasicUserList #" + getPrintableDateTime())
          .setDescription("A list of people who have triggered one or more conversion actions")
          .setMembershipLifeSpan(365)
          .setBasicUserList(basicUserListInfo)
          .setMembershipStatus(UserListMembershipStatus.OPEN)
          .build();

  // Creates the operation.
  UserListOperation operation = UserListOperation.newBuilder().setCreate(basicUserList).build();

  // Creates the service client.
  try (UserListServiceClient userListServiceClient =
      googleAdsClient.getLatestVersion().createUserListServiceClient()) {
    // Adds the basic user list.
    MutateUserListsResponse response =
        userListServiceClient.mutateUserLists(
            Long.toString(customerId), ImmutableList.of(operation));
    // Prints the results.
    System.out.printf(
        "Created basic user list with resource name '%s'.%n",
        response.getResults(0).getResourceName());
  }
}
AddConversionBasedUserList.java
      

C#

public void Run(GoogleAdsClient client, long customerId, long[] conversionActionIds)
{
    // Creates the service client.
    UserListServiceClient userListServiceClient =
        client.GetService(Services.V18.UserListService);

    List<UserListActionInfo> userListActionInfoList = new List<UserListActionInfo>();
    foreach (long conversionActionId in conversionActionIds)
    {
        // Creates the UserListActionInfo object for a given conversion action. This
        // specifies the conversion action that, when triggered, will cause a user to be
        // added to a UserList.
        userListActionInfoList.Add(new UserListActionInfo
        {
            ConversionAction =
                ResourceNames.ConversionAction(customerId, conversionActionId)
        });
    }

    // Creates a basic user list info object with all of the conversion actions.
    BasicUserListInfo basicUserListInfo = new BasicUserListInfo();
    basicUserListInfo.Actions.Add(userListActionInfoList);

    // Creates the basic user list.
    UserList basicUserList = new UserList
    {
        Name = $"Example BasicUserList #{ExampleUtilities.GetShortRandomString()}",
        Description = "A list of people who have triggered one or more conversion actions",
        MembershipLifeSpan = 365L,
        BasicUserList = basicUserListInfo,
        MembershipStatus = UserListMembershipStatus.Open
    };

    // Creates the operation.
    UserListOperation operation = new UserListOperation
    {
        Create = basicUserList
    };

    try
    {
        // Adds the new user list.
        MutateUserListsResponse response = userListServiceClient.MutateUserLists
            (customerId.ToString(), new[] { operation });

        // Prints the result.
        Console.WriteLine("Created basic user list with resource name: " +
            $"{response.Results.First().ResourceName}");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
AddConversionBasedUserList.cs
      

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    array $conversionActionIds
) {
    $userListActionInfoList = [];
    foreach ($conversionActionIds as $conversionActionId) {
        // Creates the UserListActionInfo object for a given conversion action. This specifies
        // the conversion action that, when triggered, will cause a user to be added to a
        // UserList.
        $userListActionInfoList[] = new UserListActionInfo([
            'conversion_action' => ResourceNames::forConversionAction(
                $customerId,
                $conversionActionId
            )
        ]);
    }

    // Creates a basic user list info object with all of the conversion actions.
    $basicUserListInfo = new BasicUserListInfo(['actions' => $userListActionInfoList]);

    // Creates the basic user list.
    $basicUserList = new UserList([
        'name' => 'Example BasicUserList #' . Helper::getPrintableDatetime(),
        'description' => 'A list of people who have triggered one or more conversion actions',
        'membership_status' => UserListMembershipStatus::OPEN,
        'membership_life_span' => 365,
        'basic_user_list' => $basicUserListInfo
    ]);

    // Creates the operation.
    $operation = new UserListOperation();
    $operation->setCreate($basicUserList);

    // Issues a mutate request to add the user list and prints some information.
    $userListServiceClient = $googleAdsClient->getUserListServiceClient();
    $response = $userListServiceClient->mutateUserLists(
        MutateUserListsRequest::build($customerId, [$operation])
    );
    printf(
        "Created basic user list with resource name '%s'.%s",
        $response->getResults()[0]->getResourceName(),
        PHP_EOL
    );
}
AddConversionBasedUserList.php
      

Python

def main(client, customer_id, conversion_action_ids):
    """Creates a combination user list.

    Args:
        client: The Google Ads client.
        customer_id: The customer ID for which to add the user list.
        conversion_action_ids: The IDs of the conversion actions for the basic
            user list.
    """
    # Get the UserListService and ConversionActionService clients.
    user_list_service = client.get_service("UserListService")
    conversion_action_service = client.get_service("ConversionActionService")

    # Create a list of UserListActionInfo objects for the given conversion
    # actions. These specify the conversion actions that, when triggered, will
    # cause a user to be added to a UserList.
    user_list_action_info_list = []
    for conversion_action_id in conversion_action_ids:
        user_list_action_info = client.get_type("UserListActionInfo")
        user_list_action_info.conversion_action = (
            conversion_action_service.conversion_action_path(
                customer_id, conversion_action_id
            )
        )
        user_list_action_info_list.append(user_list_action_info)

    # Create a UserListOperation and populate the UserList.
    user_list_operation = client.get_type("UserListOperation")
    user_list = user_list_operation.create
    user_list.name = f"Example BasicUserList #{uuid4()}"
    user_list.description = (
        "A list of people who have triggered one or more conversion actions"
    )
    user_list.membership_status = client.enums.UserListMembershipStatusEnum.OPEN
    user_list.membership_life_span = 365
    # The basic user list info object contains the conversion action info.
    user_list.basic_user_list.actions.extend(user_list_action_info_list)

    # Issue a mutate request to add the user list, then print the results.
    response = user_list_service.mutate_user_lists(
        customer_id=customer_id, operations=[user_list_operation]
    )
    print(
        "Created basic user list with resource name "
        f"'{response.results[0].resource_name}.'"
    )
add_conversion_based_user_list.py
      

Ruby

def add_conversion_based_user_list(customer_id, conversion_action_ids)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new

  # Creates the basic user list.
  operation = client.operation.create_resource.user_list do |u|
    u.name = "Example BasicUserList ##{(Time.new.to_f * 100).to_i}"
    u.description = "A list of people who have triggered one or more conversion actions"
    u.membership_status = :OPEN
    u.membership_life_span = 365
    # Creates a basic user list info object with all of the conversion actions.
    u.basic_user_list = client.resource.basic_user_list_info do |info|
      conversion_action_ids.each do |conversion_action_id|
        # Creates the UserListActionInfo object for a given conversion action.
        # This specifies the conversion action that, when triggered, will cause a
        # user to be added to a user_list.
        info.actions << client.resource.user_list_action_info do |action|
          action.conversion_action =
            client.path.conversion_action(customer_id, conversion_action_id)
        end
      end
    end
  end

  # Issues a mutate request to add the user list and prints some information.
  response = client.service.user_list.mutate_user_lists(
    customer_id: customer_id,
    operations: [operation],
  )

  puts "Created basic user list with resource name " \
    "#{response.results.first.resource_name}"
end
add_conversion_based_user_list.rb
      

Perl

sub add_conversion_based_user_list {
  my ($api_client, $customer_id, $conversion_action_ids) = @_;

  my $user_list_action_info_list = [];
  foreach my $conversion_action_id (@$conversion_action_ids) {
    # Create the UserListActionInfo object for a given conversion action. This
    # specifies the conversion action that, when triggered, will cause a user to
    # be added to a UserList.
    push @$user_list_action_info_list,
      Google::Ads::GoogleAds::V18::Common::UserListActionInfo->new({
        conversionAction =>
          Google::Ads::GoogleAds::V18::Utils::ResourceNames::conversion_action(
          $customer_id, $conversion_action_id
          )});
  }

  # Create a basic user list info object with all of the conversion actions.
  my $basic_user_list_info =
    Google::Ads::GoogleAds::V18::Common::BasicUserListInfo->new({
      actions => $user_list_action_info_list
    });

  # Create the basic user list.
  my $basic_user_list = Google::Ads::GoogleAds::V18::Resources::UserList->new({
    name        => "Example BasicUserList #" . uniqid(),
    description =>
      "A list of people who have triggered one or more conversion actions",
    membershipStatus   => OPEN,
    membershipLifeSpan => 365,
    basicUserList      => $basic_user_list_info
  });

  # Create the operation.
  my $user_list_operation =
    Google::Ads::GoogleAds::V18::Services::UserListService::UserListOperation->
    new({
      create => $basic_user_list
    });

  # Issue a mutate request to add the user list and print some information.
  my $user_lists_response = $api_client->UserListService()->mutate({
      customerId => $customer_id,
      operations => [$user_list_operation]});

  printf
    "Created basic user list with resource name '%s'.\n",
    $user_lists_response->{results}[0]{resourceName};

  return 1;
}
add_conversion_based_user_list.pl
      

ऐसे विज़िटर जिन्होंने कन्वर्ज़न ऐक्शन नहीं किए

आपके पास उन लोगों के लिए उपयोगकर्ताओं की एक बुनियादी सूची बनाने का विकल्प होता है जिन्होंने आपकी वेबसाइट पर ऐसी कार्रवाइयां की हैं जिन्हें आपने कन्वर्ज़न नहीं माना है. इसके लिए, ConversionAction के बजाय RemarketingAction का इस्तेमाल करें.

अहम जानकारी: RemarketingAction को Google Ads यूज़र इंटरफ़ेस (यूआई) के कन्वर्ज़न सेक्शन में नहीं दिखाया गया है. इसका स्टेटस हमेशा HIDDEN पर सेट रहता है और इसे बदला नहीं जा सकता.

सूची वापस पाना

उपयोगकर्ताओं की सूची वापस पाने के लिए, user_list संसाधन के लिए, Google Ads क्वेरी लैंग्वेज की यह क्वेरी जारी की जा सकती है.

SELECT
  user_list.name,
  user_list.membership_status,
  user_list.membership_life_span
FROM user_list
WHERE
  user_list.resource_name = 'USER_LIST_RESOURCE_NAME'

सूची को टारगेट करें

ऑडियंस सेगमेंट बनाने के बाद, अगला चरण उसे टारगेट करना है.

ऑडियंस सेगमेंट टारगेटिंग के नियम

1. पॉज़िटिव (बिडिंग के लिए उपलब्ध) उपयोगकर्ता सूचियों को एक ही समय पर, कैंपेन लेवल और विज्ञापन ग्रुप लेवल पर सेट नहीं किया जा सकता. किसी कैंपेन के लिए पॉज़िटिव उपयोगकर्ता सूची की शर्तें सेट करने से पहले, उसे कैंपेन में मौजूद सभी विज्ञापन ग्रुप से हटाना ज़रूरी है.

2. उपयोगकर्ता सूची के हिसाब से पॉज़िटिव टारगेटिंग (विज्ञापन के लिए सही दर्शक चुनना) की सुविधा, सिर्फ़ सर्च कैंपेन के लिए उपलब्ध है. डिसप्ले कैंपेन के लिए, user_list सेट करने वाले CampaignCriterion को बाहर रखना ज़रूरी है.

3. सर्च और शॉपिंग कैंपेन में, उपयोगकर्ता सूची के टारगेट के लिए ये फ़ील्ड सेट नहीं किए जा सकते:

   • url_custom_parameters
   • tracking_url_template
   • final_urls
   • final_mobile_urls

अपनी उपयोगकर्ता सूची के हिसाब से विज्ञापन दिखाना

यह प्रोसेस, एपीआई में टारगेटिंग की अन्य शर्तों की तरह ही होती है. यहां दिए गए कोड में बताया गया है कि किसी उपयोगकर्ता सूची के लिए, विज्ञापन ग्रुप में विज्ञापनों को टारगेट करने के लिए, AdGroupCriterion का इस्तेमाल कैसे किया जा सकता है:

सलाह: किसी उपयोगकर्ता सूची को बाहर रखने के लिए, AdGroupCriterion.negative फ़ील्ड को true पर सेट करें.

Java

private String targetAdsInAdGroupToUserList(
    GoogleAdsClient googleAdsClient, long customerId, long adGroupId, String userList) {
  // Creates the ad group criterion targeting members of the user list.
  AdGroupCriterion adGroupCriterion =
      AdGroupCriterion.newBuilder()
          .setAdGroup(ResourceNames.adGroup(customerId, adGroupId))
          .setUserList(UserListInfo.newBuilder().setUserList(userList).build())
          .build();

  // Creates the operation.
  AdGroupCriterionOperation operation =
      AdGroupCriterionOperation.newBuilder().setCreate(adGroupCriterion).build();

  // Creates the ad group criterion service.
  try (AdGroupCriterionServiceClient adGroupCriterionServiceClient =
      googleAdsClient.getLatestVersion().createAdGroupCriterionServiceClient()) {
    // Adds the ad group criterion.
    MutateAdGroupCriteriaResponse response =
        adGroupCriterionServiceClient.mutateAdGroupCriteria(
            Long.toString(customerId), ImmutableList.of(operation));
    // Gets and prints the results.
    String adGroupCriterionResourceName = response.getResults(0).getResourceName();
    System.out.printf(
        "Successfully created ad group criterion with resource name '%s' "
            + "targeting user list with resource name '%s' with ad group with ID %d.%n",
        adGroupCriterionResourceName, userList, adGroupId);
    return adGroupCriterionResourceName;
  }
}
SetUpRemarketing.java
      

C#

private string TargetAdsInAdGroupToUserList(
    GoogleAdsClient client, long customerId, long adGroupId, string userListResourceName)
{
    // Get the AdGroupCriterionService client.
    AdGroupCriterionServiceClient adGroupCriterionServiceClient = client.GetService
        (Services.V18.AdGroupCriterionService);

    // Create the ad group criterion targeting members of the user list.
    AdGroupCriterion adGroupCriterion = new AdGroupCriterion
    {
        AdGroup = ResourceNames.AdGroup(customerId, adGroupId),
        UserList = new UserListInfo
        {
            UserList = userListResourceName
        }
    };

    // Create the operation.
    AdGroupCriterionOperation adGroupCriterionOperation = new AdGroupCriterionOperation
    {
        Create = adGroupCriterion
    };

    // Add the ad group criterion, then print and return the new criterion's resource name.
    MutateAdGroupCriteriaResponse mutateAdGroupCriteriaResponse =
        adGroupCriterionServiceClient.MutateAdGroupCriteria(customerId.ToString(),
            new[] { adGroupCriterionOperation });

    string adGroupCriterionResourceName =
        mutateAdGroupCriteriaResponse.Results.First().ResourceName;
    Console.WriteLine("Successfully created ad group criterion with resource name " +
        $"'{adGroupCriterionResourceName}' targeting user list with resource name " +
        $"'{userListResourceName}' with ad group with ID {adGroupId}.");
    return adGroupCriterionResourceName;
}
SetUpRemarketing.cs
      

PHP

private static function targetAdsInAdGroupToUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $adGroupId,
    string $userListResourceName
): string {
    // Creates the ad group criterion targeting members of the user list.
    $adGroupCriterion = new AdGroupCriterion([
        'ad_group' => ResourceNames::forAdGroup($customerId, $adGroupId),
        'user_list' => new UserListInfo(['user_list' => $userListResourceName])
    ]);

    // Creates the operation.
    $operation = new AdGroupCriterionOperation();
    $operation->setCreate($adGroupCriterion);

    // Issues a mutate request to add an ad group criterion.
    $adGroupCriterionServiceClient = $googleAdsClient->getAdGroupCriterionServiceClient();
    /** @var MutateAdGroupCriteriaResponse $adGroupCriterionResponse */
    $adGroupCriterionResponse = $adGroupCriterionServiceClient->mutateAdGroupCriteria(
        MutateAdGroupCriteriaRequest::build($customerId, [$operation])
    );

    $adGroupCriterionResourceName =
        $adGroupCriterionResponse->getResults()[0]->getResourceName();
    printf(
        "Successfully created ad group criterion with resource name '%s' " .
        "targeting user list with resource name '%s' with ad group with ID %d.%s",
        $adGroupCriterionResourceName,
        $userListResourceName,
        $adGroupId,
        PHP_EOL
    );

    return $adGroupCriterionResourceName;
}
SetUpRemarketing.php
      

Python

def target_ads_in_ad_group_to_user_list(
    client, customer_id, ad_group_id, user_list_resource_name
):
    """Creates an ad group criterion that targets a user list with an ad group.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID used to create an ad group
            criterion.
        ad_group_id: a str ID for an ad group used to create an ad group
            criterion that targets members of a user list.
        user_list_resource_name: a str resource name for a user list.

    Returns:
        a str resource name for an ad group criterion.
    """
    ad_group_criterion_operation = client.get_type("AdGroupCriterionOperation")
    # Creates the ad group criterion targeting members of the user list.
    ad_group_criterion = ad_group_criterion_operation.create
    ad_group_criterion.ad_group = client.get_service(
        "AdGroupService"
    ).ad_group_path(customer_id, ad_group_id)
    ad_group_criterion.user_list.user_list = user_list_resource_name

    ad_group_criterion_service = client.get_service("AdGroupCriterionService")
    response = ad_group_criterion_service.mutate_ad_group_criteria(
        customer_id=customer_id, operations=[ad_group_criterion_operation]
    )
    resource_name = response.results[0].resource_name
    print(
        "Successfully created ad group criterion with resource name: "
        f"'{resource_name}' targeting user list with resource name: "
        f"'{user_list_resource_name}' and with ad group with ID "
        f"{ad_group_id}."
    )
    return resource_name
set_up_remarketing.py
      

Ruby

def target_ads_in_ad_group_to_user_list(
  client,
  customer_id,
  ad_group_id,
  user_list
)
  # Creates the ad group criterion targeting members of the user list.
  operation = client.operation.create_resource.ad_group_criterion do |agc|
    agc.ad_group = client.path.ad_group(customer_id, ad_group_id)
    agc.user_list = client.resource.user_list_info do |info|
      info.user_list = user_list
    end
  end

  # Issues a mutate request to create the ad group criterion.
  response = client.service.ad_group_criterion.mutate_ad_group_criteria(
    customer_id: customer_id,
    operations: [operation],
  )
  ad_group_criterion_resource_name = response.results.first.resource_name
  puts "Successfully created ad group criterion with resource name " \
    "'#{ad_group_criterion_resource_name}' targeting user list with resource name " \
    "'#{user_list}' with ad group with ID #{ad_group_id}"

  ad_group_criterion_resource_name
end
set_up_remarketing.rb
      

Perl

sub target_ads_in_ad_group_to_user_list {
  my ($api_client, $customer_id, $ad_group_id, $user_list_resource_name) = @_;

  # Create the ad group criterion targeting members of the user list.
  my $ad_group_criterion =
    Google::Ads::GoogleAds::V18::Resources::AdGroupCriterion->new({
      adGroup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::ad_group(
        $customer_id, $ad_group_id
      ),
      userList => Google::Ads::GoogleAds::V18::Common::UserListInfo->new({
          userList => $user_list_resource_name
        })});

  # Create the operation.
  my $ad_group_criterion_operation =
    Google::Ads::GoogleAds::V18::Services::AdGroupCriterionService::AdGroupCriterionOperation
    ->new({
      create => $ad_group_criterion
    });

  # Add the ad group criterion, then print and return the new criterion's resource name.
  my $ad_group_criteria_response =
    $api_client->AdGroupCriterionService()->mutate({
      customerId => $customer_id,
      operations => [$ad_group_criterion_operation]});

  my $ad_group_criterion_resource_name =
    $ad_group_criteria_response->{results}[0]{resourceName};
  printf "Successfully created ad group criterion with resource name '%s' " .
    "targeting user list with resource name '%s' with ad group with ID %d.\n",
    $ad_group_criterion_resource_name, $user_list_resource_name, $ad_group_id;

  return $ad_group_criterion_resource_name;
}
set_up_remarketing.pl
      

अन्य तरह की शर्तों की तरह ही, AdGroupCriterion ऑब्जेक्ट के लिए अन्य प्रॉपर्टी असाइन की जा सकती हैं. जैसे, बिड ओवरराइड.

टारगेटिंग के लेवल स्विच करना

यदि आप विज्ञापन समूह स्तरीय उपयोगकर्ता सूची मानदंड से अभियान स्तर पर स्विच कर रहे हैं तो पहले आपको उस अभियान के अंतर्गत प्रत्येक सक्षम या रोके गए विज्ञापन समूह से मौजूदा उपयोगकर्ता सूची मानदंड निकालना होगा. हर चरण के लिए उदाहरण के तौर पर दिया गया कोड देखने के लिए, बड़े किए जा सकने वाले एलिमेंट पर क्लिक करें.

सबसे पहले, किसी कैंपेन में मौजूद सभी AdGroupCriteria को फिर से पाएं.

Java

private List<String> getUserListAdGroupCriterion(
    GoogleAdsClient googleAdsClient, long customerId, long campaignId) {
  List<String> userListCriteria = new ArrayList<>();
  // Creates the Google Ads service client.
  try (GoogleAdsServiceClient googleAdsServiceClient =
      googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
    // Creates a request that will retrieve all of the ad group criteria under a campaign.
    SearchGoogleAdsRequest request =
        SearchGoogleAdsRequest.newBuilder()
            .setCustomerId(Long.toString(customerId))
            .setQuery(
                "SELECT ad_group_criterion.criterion_id"
                    + " FROM ad_group_criterion"
                    + " WHERE campaign.id = "
                    + campaignId
                    + " AND ad_group_criterion.type = 'USER_LIST'")
            .build();
    // Issues the search request.
    SearchPagedResponse searchPagedResponse = googleAdsServiceClient.search(request);
    // Iterates over all rows in all pages. Prints the results and adds the ad group criteria
    // resource names to the list.
    for (GoogleAdsRow googleAdsRow : searchPagedResponse.iterateAll()) {
      String adGroupCriterionResourceName = googleAdsRow.getAdGroupCriterion().getResourceName();
      System.out.printf(
          "Ad group criterion with resource name '%s' was found.%n",
          adGroupCriterionResourceName);
      userListCriteria.add(adGroupCriterionResourceName);
    }
  }
  return userListCriteria;
}
SetUpRemarketing.java
      

C#

private List<string> GetUserListAdGroupCriteria(
    GoogleAdsClient client, long customerId, long campaignId)
{
    // Get the GoogleAdsService client.
    GoogleAdsServiceClient googleAdsServiceClient =
        client.GetService(Services.V18.GoogleAdsService);

    List<string> userListCriteriaResourceNames = new List<string>();

    // Create a query that will retrieve all of the ad group criteria under a campaign.
    string query = $@"
        SELECT ad_group_criterion.criterion_id
        FROM ad_group_criterion
        WHERE
          campaign.id = {campaignId}
          AND ad_group_criterion.type = 'USER_LIST'";

    // Issue the search request.
    googleAdsServiceClient.SearchStream(customerId.ToString(), query,
        delegate (SearchGoogleAdsStreamResponse resp)
        {
            // Display the results and add the resource names to the list.
            foreach (GoogleAdsRow googleAdsRow in resp.Results)
            {
                string adGroupCriterionResourceName =
                    googleAdsRow.AdGroupCriterion.ResourceName;
                Console.WriteLine("Ad group criterion with resource name " +
                    $"{adGroupCriterionResourceName} was found.");
                userListCriteriaResourceNames.Add(adGroupCriterionResourceName);
            }
        });

    return userListCriteriaResourceNames;
}
SetUpRemarketing.cs
      

PHP

private static function getUserListAdGroupCriteria(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $campaignId
): array {
    // Creates a query that retrieves all of the ad group criteria under a campaign.
    $query = sprintf(
        "SELECT ad_group_criterion.criterion_id " .
        "FROM ad_group_criterion " .
        "WHERE campaign.id = %d " .
        "AND ad_group_criterion.type = 'USER_LIST'",
        $campaignId
    );

    // Creates the Google Ads service client.
    $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();

    // Issues the search request.
    $response =
        $googleAdsServiceClient->search(SearchGoogleAdsRequest::build($customerId, $query));

    $userListCriteria = [];
    // Iterates over all rows in all pages. Prints the user list criteria and adds the ad group
    // criteria resource names to the list.
    foreach ($response->iterateAllElements() as $googleAdsRow) {
        /** @var GoogleAdsRow $googleAdsRow */
        $adGroupCriterionResourceName = $googleAdsRow->getAdGroupCriterion()->getResourceName();

        printf(
            "Ad group criterion with resource name '%s' was found.%s",
            $adGroupCriterionResourceName,
            PHP_EOL
        );

        $userListCriteria[] = $adGroupCriterionResourceName;
    }

    return $userListCriteria;
}
SetUpRemarketing.php
      

Python

def get_user_list_ad_group_criteria(client, customer_id, campaign_id):
    """Finds all of user list ad group criteria under a campaign.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID.
        campaign_id: a str campaign ID.

    Returns:
        a list of ad group criterion resource names.
    """
    # Creates a query that retrieves all of the ad group criteria under a
    # campaign.
    query = f"""
        SELECT
          ad_group_criterion.criterion_id
        FROM ad_group_criterion
        WHERE campaign.id = {campaign_id}
        AND ad_group_criterion.type = USER_LIST"""

    googleads_service = client.get_service("GoogleAdsService")
    search_request = client.get_type("SearchGoogleAdsRequest")
    search_request.customer_id = customer_id
    search_request.query = query
    response = googleads_service.search(request=search_request)

    # Iterates over all rows in all pages. Prints the user list criteria and
    # adds the ad group criteria resource names to the list.
    user_list_criteria = []
    for row in response:
        resource_name = row.ad_group_criterion.resource_name
        print(
            "Ad group criterion with resource name '{resource_name}' was "
            "found."
        )
        user_list_criteria.append(resource_name)

    return user_list_criteria
set_up_remarketing.py
      

Ruby

def get_user_list_ad_group_criterion(
  client,
  customer_id,
  campaign_id
)
  user_list_criteria = []

  # Creates a query that will retrieve all of the ad group criteria 
  # under a campaign.
  query = <<~QUERY
    SELECT ad_group_criterion.criterion_id
    FROM ad_group_criterion
    WHERE campaign.id = #{campaign_id}
    AND ad_group_criterion.type = 'USER_LIST'
  QUERY

  # Issues the search request.
  response = client.service.google_ads.search(
    customer_id: customer_id,
    query: query,
  )

  # Iterates over all rows in all pages. Prints the results and adds the ad
  # group criteria resource names to the list.
  response.each do |row|
    ad_group_criterion_resource_name = row.ad_group_criterion.resource_name
    puts "Ad group criterion with resource name " \
      "'#{ad_group_criterion_resource_name}' was found"
    user_list_criteria << ad_group_criterion_resource_name
  end

  user_list_criteria
end
set_up_remarketing.rb
      

Perl

sub get_user_list_ad_group_criteria {
  my ($api_client, $customer_id, $campaign_id) = @_;

  my $user_list_criterion_resource_names = [];

  # Create a search stream request that will retrieve all of the user list ad
  # group criteria under a campaign.
  my $search_stream_request =
    Google::Ads::GoogleAds::V18::Services::GoogleAdsService::SearchGoogleAdsStreamRequest
    ->new({
      customerId => $customer_id,
      query      => sprintf(
        "SELECT ad_group_criterion.criterion_id " .
          "FROM ad_group_criterion " .
          "WHERE campaign.id = %d AND ad_group_criterion.type = 'USER_LIST'",
        $campaign_id
      )});

  my $search_stream_handler =
    Google::Ads::GoogleAds::Utils::SearchStreamHandler->new({
      service => $api_client->GoogleAdsService(),
      request => $search_stream_request
    });

  # Issue a search request and process the stream response.
  $search_stream_handler->process_contents(
    sub {
      # Display the results and add the resource names to the list.
      my $google_ads_row = shift;

      my $ad_group_criterion_resource_name =
        $google_ads_row->{adGroupCriterion}{resourceName};
      printf "Ad group criterion with resource name '%s' was found.\n",
        $ad_group_criterion_resource_name;
      push(@$user_list_criterion_resource_names,
        $ad_group_criterion_resource_name);
    });

  return $user_list_criterion_resource_names;
}
set_up_remarketing.pl
      

इसके बाद, विज्ञापन ग्रुप की ज़रूरी शर्तों वाले सभी टारगेट हटाएं.

Java

private void removeExistingListCriteriaFromAdGroup(
    GoogleAdsClient googleAdsClient, long customerId, long campaignId) {
  // Retrieves all of the ad group criteria under a campaign.
  List<String> adGroupCriteria =
      getUserListAdGroupCriterion(googleAdsClient, customerId, campaignId);

  List<AdGroupCriterionOperation> operations = new ArrayList<>();

  // Creates a list of remove operations.
  for (String adGroupCriterion : adGroupCriteria) {
    operations.add(AdGroupCriterionOperation.newBuilder().setRemove(adGroupCriterion).build());
  }

  // Creates the ad group criterion service.
  try (AdGroupCriterionServiceClient adGroupCriterionServiceClient =
      googleAdsClient.getLatestVersion().createAdGroupCriterionServiceClient()) {
    // Removes the ad group criterion.
    MutateAdGroupCriteriaResponse response =
        adGroupCriterionServiceClient.mutateAdGroupCriteria(
            Long.toString(customerId), operations);
    // Gets and prints the results.
    System.out.printf("Removed %d ad group criteria.%n", response.getResultsCount());
    for (MutateAdGroupCriterionResult result : response.getResultsList()) {
      System.out.printf(
          "Successfully removed ad group criterion with resource name '%s'.%n",
          result.getResourceName());
    }
  }
}
SetUpRemarketing.java
      

C#

private void RemoveExistingListCriteriaFromAdGroup(GoogleAdsClient client, long customerId,
    long campaignId)
{
    // Get the AdGroupCriterionService client.
    AdGroupCriterionServiceClient adGroupCriterionServiceClient =
        client.GetService(Services.V18.AdGroupCriterionService);

    // Retrieve all of the ad group criteria under a campaign.
    List<string> adGroupCriteria =
        GetUserListAdGroupCriteria(client, customerId, campaignId);

    // Create a list of remove operations.
    List<AdGroupCriterionOperation> operations = adGroupCriteria.Select(adGroupCriterion =>
        new AdGroupCriterionOperation { Remove = adGroupCriterion }).ToList();

    // Remove the ad group criteria and print the resource names of the removed criteria.
    MutateAdGroupCriteriaResponse mutateAdGroupCriteriaResponse =
        adGroupCriterionServiceClient.MutateAdGroupCriteria(customerId.ToString(),
            operations);

    Console.WriteLine($"Removed {mutateAdGroupCriteriaResponse.Results.Count} ad group " +
        "criteria.");
    foreach (MutateAdGroupCriterionResult result in mutateAdGroupCriteriaResponse.Results)
    {
        Console.WriteLine("Successfully removed ad group criterion with resource name " +
            $"'{result.ResourceName}'.");
    }
}
SetUpRemarketing.cs
      

PHP

private static function removeExistingListCriteriaFromAdGroup(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $campaignId
) {
    // Retrieves all of the ad group criteria under a campaign.
    $allAdGroupCriteria = self::getUserListAdGroupCriteria(
        $googleAdsClient,
        $customerId,
        $campaignId
    );

    $removeOperations = [];
    // Creates a list of remove operations.
    foreach ($allAdGroupCriteria as $adGroupCriterionResourceName) {
        $operation = new AdGroupCriterionOperation();
        $operation->setRemove($adGroupCriterionResourceName);
        $removeOperations[] = $operation;
    }

    // Issues a mutate request to remove the ad group criteria.
    $adGroupCriterionServiceClient = $googleAdsClient->getAdGroupCriterionServiceClient();
    /** @var MutateAdGroupCriteriaResponse $adGroupCriteriaResponse */
    $adGroupCriteriaResponse = $adGroupCriterionServiceClient->mutateAdGroupCriteria(
        MutateAdGroupCriteriaRequest::build($customerId, $removeOperations)
    );

    foreach ($adGroupCriteriaResponse->getResults() as $adGroupCriteriaResult) {
        printf(
            "Successfully removed ad group criterion with resource name '%s'.%s",
            $adGroupCriteriaResult->getResourceName(),
            PHP_EOL
        );
    }
}
SetUpRemarketing.php
      

Python

def remove_existing_criteria_from_ad_group(client, customer_id, campaign_id):
    """Removes all ad group criteria targeting a user list under a campaign.

    This is a necessary step before targeting a user list at the campaign level.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID.
        campaign_id: a str ID for a campaign that will have all ad group
            criteria that targets user lists removed.
    """
    # Retrieves all of the ad group criteria under a campaign.
    all_ad_group_criteria = get_user_list_ad_group_criteria(
        client, customer_id, campaign_id
    )

    # Creates a list of remove operations.
    remove_operations = []
    for ad_group_criterion_resource_name in all_ad_group_criteria:
        remove_operation = client.get_type("AdGroupCriterionOperation")
        remove_operation.remove = ad_group_criterion_resource_name
        remove_operations.append(remove_operation)

    ad_group_criterion_service = client.get_service("AdGroupCriterionService")
    response = ad_group_criterion_service.mutate_ad_group_criteria(
        customer_id=customer_id, operations=remove_operations
    )
    print(
        "Successfully removed ad group criterion with resource name: "
        f"'{response.results[0].resource_name}'"
    )
set_up_remarketing.py
      

Ruby

def remove_existing_list_criteria_from_ad_group(
  client,
  customer_id,
  campaign_id
)
  # Retrieves all of the ad group criteria under a campaign.
  ad_group_criteria = get_user_list_ad_group_criterion(
    client, customer_id, campaign_id)

  # Creates a list of remove operations.
  operations = []
  ad_group_criteria.each do |agc|
    operations << client.operation.remove_resource.ad_group_criterion(agc)
  end

  # Issues a mutate request to remove all ad group criteria.
  response = client.service.ad_group_criterion.mutate_ad_group_criteria(
    customer_id: customer_id,
    operations: operations,
  )
  puts "Removed #{response.results.size} ad group criteria."
  response.results.each do |result|
    puts "Successfully removed ad group criterion with resource name " \
      "'#{result.resource_name}'"
  end
end
set_up_remarketing.rb
      

Perl

sub remove_existing_list_criteria_from_ad_group {
  my ($api_client, $customer_id, $campaign_id) = @_;

  # Retrieve all of the ad group criteria under a campaign.
  my $ad_group_criteria =
    get_user_list_ad_group_criteria($api_client, $customer_id, $campaign_id);

  # Create a list of remove operations.
  my $operations = [];
  foreach my $ad_group_criterion (@$ad_group_criteria) {
    push(
      @$operations,
      Google::Ads::GoogleAds::V18::Services::AdGroupCriterionService::AdGroupCriterionOperation
        ->new({
          remove => $ad_group_criterion
        }));
  }

  # Remove the ad group criteria and print the resource names of the removed criteria.
  my $ad_group_criteria_response =
    $api_client->AdGroupCriterionService()->mutate({
      customerId => $customer_id,
      operations => $operations
    });

  printf "Removed %d ad group criteria.\n",
    scalar @{$ad_group_criteria_response->{results}};
  foreach my $result (@{$ad_group_criteria_response->{results}}) {
    printf "Successfully removed ad group criterion with resource name '%s'.\n",
      $result->{resourceName};
  }
}
set_up_remarketing.pl
      

विज्ञापन ग्रुप लेवल की उपयोगकर्ता सूचियों पर स्विच करते समय, कैंपेन लेवल की उपयोगकर्ता सूची की मौजूदा शर्तों को भी हटाना होगा. यह प्रोसेस, पिछले उदाहरण जैसी ही है.

CampaignCriterion का इस्तेमाल करके, किसी कैंपेन में विज्ञापनों को उपयोगकर्ता सूची के हिसाब से टारगेट करें.

Java

private String targetAdsInCampaignToUserList(
    GoogleAdsClient googleAdsClient, long customerId, long campaignId, String userList) {
  // Creates the campaign criterion.
  CampaignCriterion campaignCriterion =
      CampaignCriterion.newBuilder()
          .setCampaign(ResourceNames.campaign(customerId, campaignId))
          .setUserList(UserListInfo.newBuilder().setUserList(userList).build())
          .build();

  // Creates the operation.
  CampaignCriterionOperation operation =
      CampaignCriterionOperation.newBuilder().setCreate(campaignCriterion).build();

  // Creates the campaign criterion service client.
  try (CampaignCriterionServiceClient campaignCriterionServiceClient =
      googleAdsClient.getLatestVersion().createCampaignCriterionServiceClient()) {
    // Adds the campaign criterion.
    MutateCampaignCriteriaResponse response =
        campaignCriterionServiceClient.mutateCampaignCriteria(
            Long.toString(customerId), ImmutableList.of(operation));
    // Gets and prints the campaign criterion resource name.
    String campaignCriterionResourceName = response.getResults(0).getResourceName();
    System.out.printf(
        "Successfully created campaign criterion with resource name '%s' "
            + "targeting user list with resource name '%s' with campaign with ID %d.%n",
        campaignCriterionResourceName, userList, campaignId);
    return campaignCriterionResourceName;
  }
}
SetUpRemarketing.java
      

C#

private string TargetAdsInCampaignToUserList(
    GoogleAdsClient client, long customerId, long campaignId, string userListResourceName)
{
    // Get the CampaignCriterionService client.
    CampaignCriterionServiceClient campaignCriterionServiceClient =
        client.GetService(Services.V18.CampaignCriterionService);

    // Create the campaign criterion.
    CampaignCriterion campaignCriterion = new CampaignCriterion
    {
        Campaign = ResourceNames.Campaign(customerId, campaignId),
        UserList = new UserListInfo
        {
            UserList = userListResourceName
        }
    };

    // Create the operation.
    CampaignCriterionOperation campaignCriterionOperation = new CampaignCriterionOperation
    {
        Create = campaignCriterion
    };

    // Add the campaign criterion and print the resulting criterion's resource name.
    MutateCampaignCriteriaResponse mutateCampaignCriteriaResponse =
        campaignCriterionServiceClient.MutateCampaignCriteria(customerId.ToString(),
            new[] { campaignCriterionOperation });

    string campaignCriterionResourceName =
        mutateCampaignCriteriaResponse.Results.First().ResourceName;
    Console.WriteLine("Successfully created campaign criterion with resource name " +
        $"'{campaignCriterionResourceName}' targeting user list with resource name " +
        $"'{userListResourceName}' with campaign with ID {campaignId}.");

    return campaignCriterionResourceName;
}
SetUpRemarketing.cs
      

PHP

private static function targetAdsInCampaignToUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $campaignId,
    string $userListResourceName
): string {
    // Creates the campaign criterion.
    $campaignCriterion = new CampaignCriterion([
        'campaign' => ResourceNames::forCampaign($customerId, $campaignId),
        'user_list' => new UserListInfo(['user_list' => $userListResourceName])
    ]);

    // Creates the operation.
    $operation = new CampaignCriterionOperation();
    $operation->setCreate($campaignCriterion);

    // Issues a mutate request to create a campaign criterion.
    $campaignCriterionServiceClient = $googleAdsClient->getCampaignCriterionServiceClient();
    /** @var MutateCampaignCriteriaResponse $campaignCriteriaResponse */
    $campaignCriteriaResponse = $campaignCriterionServiceClient->mutateCampaignCriteria(
        MutateCampaignCriteriaRequest::build($customerId, [$operation])
    );

    $campaignCriterionResourceName =
        $campaignCriteriaResponse->getResults()[0]->getResourceName();
    printf(
        "Successfully created campaign criterion with resource name '%s' " .
        "targeting user list with resource name '%s' with campaign with ID %d.%s",
        $campaignCriterionResourceName,
        $userListResourceName,
        $campaignId,
        PHP_EOL
    );

    return $campaignCriterionResourceName;
}
SetUpRemarketing.php
      

Python

def target_ads_in_campaign_to_user_list(
    client, customer_id, campaign_id, user_list_resource_name
):
    """Creates a campaign criterion that targets a user list with a campaign.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID used to create an campaign
            criterion.
        campaign_id: a str ID for a campaign used to create a campaign
            criterion that targets members of a user list.
        user_list_resource_name: a str resource name for a user list.

    Returns:
        a str resource name for a campaign criterion.
    """
    campaign_criterion_operation = client.get_type("CampaignCriterionOperation")
    campaign_criterion = campaign_criterion_operation.create
    campaign_criterion.campaign = client.get_service(
        "CampaignService"
    ).campaign_path(customer_id, campaign_id)
    campaign_criterion.user_list.user_list = user_list_resource_name

    campaign_criterion_service = client.get_service("CampaignCriterionService")
    response = campaign_criterion_service.mutate_campaign_criteria(
        customer_id=customer_id, operations=[campaign_criterion_operation]
    )
    resource_name = response.results[0].resource_name
    print(
        "Successfully created campaign criterion with resource name "
        f"'{resource_name}' targeting user list with resource name "
        f"'{user_list_resource_name}' with campaign with ID {campaign_id}"
    )
    return resource_name
set_up_remarketing.py
      

Ruby

def target_ads_in_campaign_to_user_list(
  client,
  customer_id,
  campaign_id,
  user_list
)
  # Creates the campaign criterion targeting members of the user list.
  operation = client.operation.create_resource.campaign_criterion do |cc|
    cc.campaign = client.path.campaign(customer_id, campaign_id)
    cc.user_list = client.resource.user_list_info do |info|
      info.user_list = user_list
    end
  end

  # Issues a mutate request to create the campaign criterion.
  response = client.service.campaign_criterion.mutate_campaign_criteria(
    customer_id: customer_id,
    operations: [operation],
  )
  campaign_criterion_resource_name = response.results.first.resource_name
  puts "Successfully created campaign criterion with resource name " \
    "'#{campaign_criterion_resource_name}' targeting user list with resource name " \
    "'#{user_list}' with campaign with ID #{campaign_id}"

  campaign_criterion_resource_name
end
set_up_remarketing.rb
      

Perl

sub target_ads_in_campaign_to_user_list {
  my ($api_client, $customer_id, $campaign_id, $user_list_resource_name) = @_;

  # Create the campaign criterion.
  my $campaign_criterion =
    Google::Ads::GoogleAds::V18::Resources::CampaignCriterion->new({
      campaign => Google::Ads::GoogleAds::V18::Utils::ResourceNames::campaign(
        $customer_id, $campaign_id
      ),
      userList => Google::Ads::GoogleAds::V18::Common::UserListInfo->new({
          userList => $user_list_resource_name
        })});

  # Create the operation.
  my $campaign_criterion_operation =
    Google::Ads::GoogleAds::V18::Services::CampaignCriterionService::CampaignCriterionOperation
    ->new({
      create => $campaign_criterion
    });

  # Add the campaign criterion and print the resulting criterion's resource name.
  my $campaign_criteria_response =
    $api_client->CampaignCriterionService()->mutate({
      customerId => $customer_id,
      operations => [$campaign_criterion_operation]});

  my $campaign_criterion_resource_name =
    $campaign_criteria_response->{results}[0]{resourceName};
  printf "Successfully created campaign criterion with resource name '%s' " .
    "targeting user list with resource name '%s' with campaign with ID %d.\n",
    $campaign_criterion_resource_name, $user_list_resource_name, $campaign_id;

  return $campaign_criterion_resource_name;
}
set_up_remarketing.pl
      

लिस्ट की परफ़ॉर्मेंस की समीक्षा करना

अपने ऑडियंस सेगमेंट की परफ़ॉर्मेंस का डेटा इकट्ठा करने के लिए, ad_group_audience_view या campaign_audience_view संसाधन के लिए खोज अनुरोध करें. उदाहरण के लिए, conversions या cost_per_conversion को देखकर यह पता लगाया जा सकता है कि ऑडियंस सेगमेंट को टारगेट करने से असल में ज़्यादा कन्वर्ज़न मिल रहे हैं या नहीं. इसके बाद, अपने बिड घटाने या बढ़ाने वाले मॉडिफ़ायर में बदलाव करें.

SELECT
  ad_group_criterion.criterion_id,
  metrics.conversions,
  metrics.cost_per_conversion
FROM ad_group_audience_view