Użytkownicy, którzy wykonali określone działania

Listę odbiorców możesz wypełniać osobami, które wykonały określone działania w Twojej witrynie. Jeśli korzystasz ze śledzenia konwersji, możesz kierować reklamy na użytkowników, którzy wcześniej dokonali w Twojej witrynie konwersji (np. zakupu).

Reklamy możesz też kierować na osoby, które wykonały w Twojej witrynie określone działanie, które nie traktujesz jako konwersję, np. dodały produkt do koszyka, ale go usunęły, nie dokonując zakupu.

Wymagania wstępne

Aby utworzyć segmenty odbiorców i kierować na nie reklamy, musisz najpierw:

1. Zapoznaj się z zasadami reklamy opartej na zainteresowaniach i lokalizacji. Do tworzenia list odbiorców nie można używać informacji o użytkownikach o charakterze poufnym.

2. Skonfiguruj tag Google.

   Aby tworzyć listy użytkowników na podstawie ich zachowań w aplikacji mobilnej, reklamodawcy powinni zaimplementować pakiet SDK Firebase lub korzystać z pakietów SDK innych firm.

1. Skonfiguruj śledzenie konwersji. Postępuj zgodnie z instrukcjami w przewodniku wprowadzającym dotyczącymi zarządzania konwersjami. Następnie zainstaluj tag Google w swojej witrynie.

Pobieranie tagu Google

Wszystkie konta Google Ads mają dokładnie 1 tag Google na poziomie konta, który jest tworzony automatycznie po otwarciu konta.

Tag Google możesz pobrać w interfejsie Google Ads, wykonując instrukcje podane w Centrum pomocy. Możesz też utworzyć RemarketingAction w interfejsie Google Ads API, a potem pobrać tag Google, wysyłając żądanie GoogleAdsService.searchStream za pomocą zasobu remarketing_action:

SELECT
  remarketing_action.id,
  remarketing_action.name,
  remarketing_action.tag_snippets
FROM remarketing_action
WHERE remarketing_action.resource_name = 'REMARKETING_ACTION_RESOURCE_NAME'

Instalowanie tagu Google w witrynie lub aplikacji

Następnym krokiem jest zainstalowanie tagu Google na wszystkich stronach witryny. Więcej informacji o dodawaniu tagu Google do witryny lub aplikacji mobilnej

Jeśli planujesz tworzyć segmenty odbiorców tylko na podstawie adresów URL odwiedzanych stron, nie musisz wprowadzać żadnych zmian w tagu Google. Jeśli używasz parametrów niestandardowych, musisz edytować tag, aby uwzględnić je w sposób opisany w artykule Zaawansowane strategie tagowania i tworzenia list remarketingowych.

Aby sprawdzić instalację tagu, możesz użyć rozszerzenia Google Tag Assistant.

Wbudowane parametry tagu Google

Za pomocą wbudowanego parametru remarketingowego url__ możesz kierować reklamy na listę użytkowników na podstawie adresów URL, które odwiedzili w Twojej witrynie. Przykład takiej listy znajdziesz w sekcji Użytkownicy, którzy odwiedzili Twoją witrynę.

Niestandardowe parametry tagu Google

Aby tworzyć bardziej dopasowane listy użytkowników, możesz dodać do tagu Google parametry niestandardowe tagu Google.

Zanim utworzysz własne parametry niestandardowe, zapoznaj się z listą zdefiniowanych wstępnie parametrów, aby sprawdzić, czy któryś z nich nie będzie odpowiedni do Twojego przypadku użycia. Korzystanie z wstępnie zdefiniowanych parametrów ułatwia integrację z innymi funkcjami remarketingu w Google Ads.

Tworzenie listy użytkowników

Kierowanie na osoby, które wykonały określone działania, wymaga ustawienia pola basic_user_list w UserList na obiekt BasicUserListInfo zawierający odwołania do działań, na które chcesz kierować reklamy (czy to konwersje, czy działania niebędące konwersjami).

Pełny opis przykładowego scenariusza, w którym kierujesz reklamy na użytkowników na podstawie kombinacji działań powodujących konwersję i działań nieprowadzących do konwersji, znajdziesz w artykule Przykładowy scenariusz.

Użytkownicy, którzy wywołali konwersję

Podstawowa lista użytkowników zawiera użytkowników, którzy wywołali co najmniej 1 działanie powodujące konwersję w Twojej witrynie. Podczas tworzenia podstawowej listy użytkowników podajesz nazwę zasobu ConversionAction obiektowi UserListActionInfo, który jest przekazywany do obiektu UserList.

W tym przykładzie tworzymy podstawową listę użytkowników powiązaną z 2 dotychczasowymi działaniami konwersji:

JavaC#PHPPythonRubyPerl

private void runExample(
    GoogleAdsClient googleAdsClient, long customerId, List<Long> conversionActionIds) {
  List<UserListActionInfo> userListActionInfoList = new ArrayList<>();
  for (long conversionActionId : conversionActionIds) {
    // Creates the UserListActionInfo object for a given conversion action. This specifies the
    // conversion action that, when triggered, will cause a user to be added to a UserList.
    UserListActionInfo userListActionInfo =
        UserListActionInfo.newBuilder()
            .setConversionAction(ResourceNames.conversionAction(customerId, conversionActionId))
            .build();
    userListActionInfoList.add(userListActionInfo);
  }

  // Creates a basic user list info object with all of the conversion actions.
  BasicUserListInfo basicUserListInfo =
      BasicUserListInfo.newBuilder().addAllActions(userListActionInfoList).build();

  // Creates the basic user list.
  UserList basicUserList =
      UserList.newBuilder()
          .setName("Example BasicUserList #" + getPrintableDateTime())
          .setDescription("A list of people who have triggered one or more conversion actions")
          .setMembershipLifeSpan(365)
          .setBasicUserList(basicUserListInfo)
          .setMembershipStatus(UserListMembershipStatus.OPEN)
          .build();

  // Creates the operation.
  UserListOperation operation = UserListOperation.newBuilder().setCreate(basicUserList).build();

  // Creates the service client.
  try (UserListServiceClient userListServiceClient =
      googleAdsClient.getLatestVersion().createUserListServiceClient()) {
    // Adds the basic user list.
    MutateUserListsResponse response =
        userListServiceClient.mutateUserLists(
            Long.toString(customerId), ImmutableList.of(operation));
    // Prints the results.
    System.out.printf(
        "Created basic user list with resource name '%s'.%n",
        response.getResults(0).getResourceName());
  }
}
AddConversionBasedUserList.java
      

public void Run(GoogleAdsClient client, long customerId, long[] conversionActionIds)
{
    // Creates the service client.
    UserListServiceClient userListServiceClient =
        client.GetService(Services.V19.UserListService);

    List<UserListActionInfo> userListActionInfoList = new List<UserListActionInfo>();
    foreach (long conversionActionId in conversionActionIds)
    {
        // Creates the UserListActionInfo object for a given conversion action. This
        // specifies the conversion action that, when triggered, will cause a user to be
        // added to a UserList.
        userListActionInfoList.Add(new UserListActionInfo
        {
            ConversionAction =
                ResourceNames.ConversionAction(customerId, conversionActionId)
        });
    }

    // Creates a basic user list info object with all of the conversion actions.
    BasicUserListInfo basicUserListInfo = new BasicUserListInfo();
    basicUserListInfo.Actions.Add(userListActionInfoList);

    // Creates the basic user list.
    UserList basicUserList = new UserList
    {
        Name = $"Example BasicUserList #{ExampleUtilities.GetShortRandomString()}",
        Description = "A list of people who have triggered one or more conversion actions",
        MembershipLifeSpan = 365L,
        BasicUserList = basicUserListInfo,
        MembershipStatus = UserListMembershipStatus.Open
    };

    // Creates the operation.
    UserListOperation operation = new UserListOperation
    {
        Create = basicUserList
    };

    try
    {
        // Adds the new user list.
        MutateUserListsResponse response = userListServiceClient.MutateUserLists
            (customerId.ToString(), new[] { operation });

        // Prints the result.
        Console.WriteLine("Created basic user list with resource name: " +
            $"{response.Results.First().ResourceName}");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
AddConversionBasedUserList.cs
      

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    array $conversionActionIds
) {
    $userListActionInfoList = [];
    foreach ($conversionActionIds as $conversionActionId) {
        // Creates the UserListActionInfo object for a given conversion action. This specifies
        // the conversion action that, when triggered, will cause a user to be added to a
        // UserList.
        $userListActionInfoList[] = new UserListActionInfo([
            'conversion_action' => ResourceNames::forConversionAction(
                $customerId,
                $conversionActionId
            )
        ]);
    }

    // Creates a basic user list info object with all of the conversion actions.
    $basicUserListInfo = new BasicUserListInfo(['actions' => $userListActionInfoList]);

    // Creates the basic user list.
    $basicUserList = new UserList([
        'name' => 'Example BasicUserList #' . Helper::getPrintableDatetime(),
        'description' => 'A list of people who have triggered one or more conversion actions',
        'membership_status' => UserListMembershipStatus::OPEN,
        'membership_life_span' => 365,
        'basic_user_list' => $basicUserListInfo
    ]);

    // Creates the operation.
    $operation = new UserListOperation();
    $operation->setCreate($basicUserList);

    // Issues a mutate request to add the user list and prints some information.
    $userListServiceClient = $googleAdsClient->getUserListServiceClient();
    $response = $userListServiceClient->mutateUserLists(
        MutateUserListsRequest::build($customerId, [$operation])
    );
    printf(
        "Created basic user list with resource name '%s'.%s",
        $response->getResults()[0]->getResourceName(),
        PHP_EOL
    );
}
AddConversionBasedUserList.php
      

def main(client, customer_id, conversion_action_ids):
    """Creates a combination user list.

    Args:
        client: The Google Ads client.
        customer_id: The customer ID for which to add the user list.
        conversion_action_ids: The IDs of the conversion actions for the basic
            user list.
    """
    # Get the UserListService and ConversionActionService clients.
    user_list_service = client.get_service("UserListService")
    conversion_action_service = client.get_service("ConversionActionService")

    # Create a list of UserListActionInfo objects for the given conversion
    # actions. These specify the conversion actions that, when triggered, will
    # cause a user to be added to a UserList.
    user_list_action_info_list = []
    for conversion_action_id in conversion_action_ids:
        user_list_action_info = client.get_type("UserListActionInfo")
        user_list_action_info.conversion_action = (
            conversion_action_service.conversion_action_path(
                customer_id, conversion_action_id
            )
        )
        user_list_action_info_list.append(user_list_action_info)

    # Create a UserListOperation and populate the UserList.
    user_list_operation = client.get_type("UserListOperation")
    user_list = user_list_operation.create
    user_list.name = f"Example BasicUserList #{uuid4()}"
    user_list.description = (
        "A list of people who have triggered one or more conversion actions"
    )
    user_list.membership_status = client.enums.UserListMembershipStatusEnum.OPEN
    user_list.membership_life_span = 365
    # The basic user list info object contains the conversion action info.
    user_list.basic_user_list.actions.extend(user_list_action_info_list)

    # Issue a mutate request to add the user list, then print the results.
    response = user_list_service.mutate_user_lists(
        customer_id=customer_id, operations=[user_list_operation]
    )
    print(
        "Created basic user list with resource name "
        f"'{response.results[0].resource_name}.'"
    )
add_conversion_based_user_list.py
      

def add_conversion_based_user_list(customer_id, conversion_action_ids)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new

  # Creates the basic user list.
  operation = client.operation.create_resource.user_list do |u|
    u.name = "Example BasicUserList ##{(Time.new.to_f * 100).to_i}"
    u.description = "A list of people who have triggered one or more conversion actions"
    u.membership_status = :OPEN
    u.membership_life_span = 365
    # Creates a basic user list info object with all of the conversion actions.
    u.basic_user_list = client.resource.basic_user_list_info do |info|
      conversion_action_ids.each do |conversion_action_id|
        # Creates the UserListActionInfo object for a given conversion action.
        # This specifies the conversion action that, when triggered, will cause a
        # user to be added to a user_list.
        info.actions << client.resource.user_list_action_info do |action|
          action.conversion_action =
            client.path.conversion_action(customer_id, conversion_action_id)
        end
      end
    end
  end

  # Issues a mutate request to add the user list and prints some information.
  response = client.service.user_list.mutate_user_lists(
    customer_id: customer_id,
    operations: [operation],
  )

  puts "Created basic user list with resource name " \
    "#{response.results.first.resource_name}"
end
add_conversion_based_user_list.rb
      

sub add_conversion_based_user_list {
  my ($api_client, $customer_id, $conversion_action_ids) = @_;

  my $user_list_action_info_list = [];
  foreach my $conversion_action_id (@$conversion_action_ids) {
    # Create the UserListActionInfo object for a given conversion action. This
    # specifies the conversion action that, when triggered, will cause a user to
    # be added to a UserList.
    push @$user_list_action_info_list,
      Google::Ads::GoogleAds::V19::Common::UserListActionInfo->new({
        conversionAction =>
          Google::Ads::GoogleAds::V19::Utils::ResourceNames::conversion_action(
          $customer_id, $conversion_action_id
          )});
  }

  # Create a basic user list info object with all of the conversion actions.
  my $basic_user_list_info =
    Google::Ads::GoogleAds::V19::Common::BasicUserListInfo->new({
      actions => $user_list_action_info_list
    });

  # Create the basic user list.
  my $basic_user_list = Google::Ads::GoogleAds::V19::Resources::UserList->new({
    name        => "Example BasicUserList #" . uniqid(),
    description =>
      "A list of people who have triggered one or more conversion actions",
    membershipStatus   => OPEN,
    membershipLifeSpan => 365,
    basicUserList      => $basic_user_list_info
  });

  # Create the operation.
  my $user_list_operation =
    Google::Ads::GoogleAds::V19::Services::UserListService::UserListOperation->
    new({
      create => $basic_user_list
    });

  # Issue a mutate request to add the user list and print some information.
  my $user_lists_response = $api_client->UserListService()->mutate({
      customerId => $customer_id,
      operations => [$user_list_operation]});

  printf
    "Created basic user list with resource name '%s'.\n",
    $user_lists_response->{results}[0]{resourceName};

  return 1;
}
add_conversion_based_user_list.pl
      

Użytkownicy, którzy wykonali działania niezwiązane z konwersją

Możesz utworzyć podstawową listę użytkowników, którzy podjęli w Twojej witrynie działania, które nie są przez Ciebie uznawane za konwersje, powiązać ją z wartością RemarketingAction zamiast z wartością ConversionAction.

Ważne: RemarketingAction nie pojawia się w sekcji Konwersje w interfejsie Google Ads. Jego stan jest zawsze ustawiony na HIDDEN i nie można go zmienić.

Pobieranie listy

Aby pobrać listę użytkowników, możesz wysłać do zasobu user_list następujące zapytanie w języku zapytań Google Ads.

SELECT
  user_list.name,
  user_list.membership_status,
  user_list.membership_life_span
FROM user_list
WHERE
  user_list.resource_name = 'USER_LIST_RESOURCE_NAME'

Kierowanie reklam na listę

Po utworzeniu segmentu odbiorców kolejnym krokiem jest jego użycie do kierowania reklam.

Reguły kierowania na segmenty odbiorców

1. Listy użytkowników uwzględnianych pozytywnie (z możliwością ustawienia stawki) nie mogą być ustawiane jednocześnie na poziomie kampanii i grupy reklam. Zanim ustawisz kryteria listy pozytywnych użytkowników, musisz usunąć je ze wszystkich grup reklam w kampanii.

2. Kierowanie pozytywne według listy użytkowników jest obsługiwane tylko w kampaniach w sieci wyszukiwania. W przypadku kampanii w sieci reklamowej CampaignCriteriontego typu zestawów user_list należy wykluczyć.

3. W kampaniach w sieci wyszukiwania i kampaniach produktowych cele oparte na listach użytkowników nie obsługują ustawiania tych pól:

   • url_custom_parameters
   • tracking_url_template
   • final_urls
   • final_mobile_urls

Kierowanie reklam na listę użytkowników

Proces jest podobny do innych typów kryteriów kierowania w interfejsie API. Poniższy kod pokazuje, jak za pomocą parametru AdGroupCriterion kierować reklamy w grupie reklam na listę użytkowników:

Wskazówka: aby wykluczyć listę użytkowników, ustaw pole AdGroupCriterion.negative na true.

JavaC#PHPPythonRubyPerl

private String targetAdsInAdGroupToUserList(
    GoogleAdsClient googleAdsClient, long customerId, long adGroupId, String userList) {
  // Creates the ad group criterion targeting members of the user list.
  AdGroupCriterion adGroupCriterion =
      AdGroupCriterion.newBuilder()
          .setAdGroup(ResourceNames.adGroup(customerId, adGroupId))
          .setUserList(UserListInfo.newBuilder().setUserList(userList).build())
          .build();

  // Creates the operation.
  AdGroupCriterionOperation operation =
      AdGroupCriterionOperation.newBuilder().setCreate(adGroupCriterion).build();

  // Creates the ad group criterion service.
  try (AdGroupCriterionServiceClient adGroupCriterionServiceClient =
      googleAdsClient.getLatestVersion().createAdGroupCriterionServiceClient()) {
    // Adds the ad group criterion.
    MutateAdGroupCriteriaResponse response =
        adGroupCriterionServiceClient.mutateAdGroupCriteria(
            Long.toString(customerId), ImmutableList.of(operation));
    // Gets and prints the results.
    String adGroupCriterionResourceName = response.getResults(0).getResourceName();
    System.out.printf(
        "Successfully created ad group criterion with resource name '%s' "
            + "targeting user list with resource name '%s' with ad group with ID %d.%n",
        adGroupCriterionResourceName, userList, adGroupId);
    return adGroupCriterionResourceName;
  }
}
SetUpRemarketing.java
      

private string TargetAdsInAdGroupToUserList(
    GoogleAdsClient client, long customerId, long adGroupId, string userListResourceName)
{
    // Get the AdGroupCriterionService client.
    AdGroupCriterionServiceClient adGroupCriterionServiceClient = client.GetService
        (Services.V19.AdGroupCriterionService);

    // Create the ad group criterion targeting members of the user list.
    AdGroupCriterion adGroupCriterion = new AdGroupCriterion
    {
        AdGroup = ResourceNames.AdGroup(customerId, adGroupId),
        UserList = new UserListInfo
        {
            UserList = userListResourceName
        }
    };

    // Create the operation.
    AdGroupCriterionOperation adGroupCriterionOperation = new AdGroupCriterionOperation
    {
        Create = adGroupCriterion
    };

    // Add the ad group criterion, then print and return the new criterion's resource name.
    MutateAdGroupCriteriaResponse mutateAdGroupCriteriaResponse =
        adGroupCriterionServiceClient.MutateAdGroupCriteria(customerId.ToString(),
            new[] { adGroupCriterionOperation });

    string adGroupCriterionResourceName =
        mutateAdGroupCriteriaResponse.Results.First().ResourceName;
    Console.WriteLine("Successfully created ad group criterion with resource name " +
        $"'{adGroupCriterionResourceName}' targeting user list with resource name " +
        $"'{userListResourceName}' with ad group with ID {adGroupId}.");
    return adGroupCriterionResourceName;
}
SetUpRemarketing.cs
      

private static function targetAdsInAdGroupToUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $adGroupId,
    string $userListResourceName
): string {
    // Creates the ad group criterion targeting members of the user list.
    $adGroupCriterion = new AdGroupCriterion([
        'ad_group' => ResourceNames::forAdGroup($customerId, $adGroupId),
        'user_list' => new UserListInfo(['user_list' => $userListResourceName])
    ]);

    // Creates the operation.
    $operation = new AdGroupCriterionOperation();
    $operation->setCreate($adGroupCriterion);

    // Issues a mutate request to add an ad group criterion.
    $adGroupCriterionServiceClient = $googleAdsClient->getAdGroupCriterionServiceClient();
    /** @var MutateAdGroupCriteriaResponse $adGroupCriterionResponse */
    $adGroupCriterionResponse = $adGroupCriterionServiceClient->mutateAdGroupCriteria(
        MutateAdGroupCriteriaRequest::build($customerId, [$operation])
    );

    $adGroupCriterionResourceName =
        $adGroupCriterionResponse->getResults()[0]->getResourceName();
    printf(
        "Successfully created ad group criterion with resource name '%s' " .
        "targeting user list with resource name '%s' with ad group with ID %d.%s",
        $adGroupCriterionResourceName,
        $userListResourceName,
        $adGroupId,
        PHP_EOL
    );

    return $adGroupCriterionResourceName;
}
SetUpRemarketing.php
      

def target_ads_in_ad_group_to_user_list(
    client, customer_id, ad_group_id, user_list_resource_name
):
    """Creates an ad group criterion that targets a user list with an ad group.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID used to create an ad group
            criterion.
        ad_group_id: a str ID for an ad group used to create an ad group
            criterion that targets members of a user list.
        user_list_resource_name: a str resource name for a user list.

    Returns:
        a str resource name for an ad group criterion.
    """
    ad_group_criterion_operation = client.get_type("AdGroupCriterionOperation")
    # Creates the ad group criterion targeting members of the user list.
    ad_group_criterion = ad_group_criterion_operation.create
    ad_group_criterion.ad_group = client.get_service(
        "AdGroupService"
    ).ad_group_path(customer_id, ad_group_id)
    ad_group_criterion.user_list.user_list = user_list_resource_name

    ad_group_criterion_service = client.get_service("AdGroupCriterionService")
    response = ad_group_criterion_service.mutate_ad_group_criteria(
        customer_id=customer_id, operations=[ad_group_criterion_operation]
    )
    resource_name = response.results[0].resource_name
    print(
        "Successfully created ad group criterion with resource name: "
        f"'{resource_name}' targeting user list with resource name: "
        f"'{user_list_resource_name}' and with ad group with ID "
        f"{ad_group_id}."
    )
    return resource_name
set_up_remarketing.py
      

def target_ads_in_ad_group_to_user_list(
  client,
  customer_id,
  ad_group_id,
  user_list
)
  # Creates the ad group criterion targeting members of the user list.
  operation = client.operation.create_resource.ad_group_criterion do |agc|
    agc.ad_group = client.path.ad_group(customer_id, ad_group_id)
    agc.user_list = client.resource.user_list_info do |info|
      info.user_list = user_list
    end
  end

  # Issues a mutate request to create the ad group criterion.
  response = client.service.ad_group_criterion.mutate_ad_group_criteria(
    customer_id: customer_id,
    operations: [operation],
  )
  ad_group_criterion_resource_name = response.results.first.resource_name
  puts "Successfully created ad group criterion with resource name " \
    "'#{ad_group_criterion_resource_name}' targeting user list with resource name " \
    "'#{user_list}' with ad group with ID #{ad_group_id}"

  ad_group_criterion_resource_name
end
set_up_remarketing.rb
      

sub target_ads_in_ad_group_to_user_list {
  my ($api_client, $customer_id, $ad_group_id, $user_list_resource_name) = @_;

  # Create the ad group criterion targeting members of the user list.
  my $ad_group_criterion =
    Google::Ads::GoogleAds::V19::Resources::AdGroupCriterion->new({
      adGroup => Google::Ads::GoogleAds::V19::Utils::ResourceNames::ad_group(
        $customer_id, $ad_group_id
      ),
      userList => Google::Ads::GoogleAds::V19::Common::UserListInfo->new({
          userList => $user_list_resource_name
        })});

  # Create the operation.
  my $ad_group_criterion_operation =
    Google::Ads::GoogleAds::V19::Services::AdGroupCriterionService::AdGroupCriterionOperation
    ->new({
      create => $ad_group_criterion
    });

  # Add the ad group criterion, then print and return the new criterion's resource name.
  my $ad_group_criteria_response =
    $api_client->AdGroupCriterionService()->mutate({
      customerId => $customer_id,
      operations => [$ad_group_criterion_operation]});

  my $ad_group_criterion_resource_name =
    $ad_group_criteria_response->{results}[0]{resourceName};
  printf "Successfully created ad group criterion with resource name '%s' " .
    "targeting user list with resource name '%s' with ad group with ID %d.\n",
    $ad_group_criterion_resource_name, $user_list_resource_name, $ad_group_id;

  return $ad_group_criterion_resource_name;
}
set_up_remarketing.pl
      

Podobnie jak w przypadku innych typów kryteriów, możesz przypisać do obiektu AdGroupCriterion inne właściwości, np. zastąpienia stawek.

Zmiana poziomów kierowania

Jeśli przełączasz się z kryteriów listy użytkowników na poziomie grupy reklam na kryteria listy użytkowników na poziomie kampanii, musisz najpierw usunąć dotychczasowe kryteria listy użytkowników z każdej włączonej lub wstrzymanej grupy reklam w ramach tej kampanii. Kliknij elementy, które można rozwinąć, aby wyświetlić przykładowy kod dla poszczególnych kroków.

Najpierw pobierz wszystkie kryteria AdGroupCriteria z danej kampanii.

JavaC#PHPPythonRubyPerl

private List<String> getUserListAdGroupCriterion(
    GoogleAdsClient googleAdsClient, long customerId, long campaignId) {
  List<String> userListCriteria = new ArrayList<>();
  // Creates the Google Ads service client.
  try (GoogleAdsServiceClient googleAdsServiceClient =
      googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
    // Creates a request that will retrieve all of the ad group criteria under a campaign.
    SearchGoogleAdsRequest request =
        SearchGoogleAdsRequest.newBuilder()
            .setCustomerId(Long.toString(customerId))
            .setQuery(
                "SELECT ad_group_criterion.criterion_id"
                    + " FROM ad_group_criterion"
                    + " WHERE campaign.id = "
                    + campaignId
                    + " AND ad_group_criterion.type = 'USER_LIST'")
            .build();
    // Issues the search request.
    SearchPagedResponse searchPagedResponse = googleAdsServiceClient.search(request);
    // Iterates over all rows in all pages. Prints the results and adds the ad group criteria
    // resource names to the list.
    for (GoogleAdsRow googleAdsRow : searchPagedResponse.iterateAll()) {
      String adGroupCriterionResourceName = googleAdsRow.getAdGroupCriterion().getResourceName();
      System.out.printf(
          "Ad group criterion with resource name '%s' was found.%n",
          adGroupCriterionResourceName);
      userListCriteria.add(adGroupCriterionResourceName);
    }
  }
  return userListCriteria;
}
SetUpRemarketing.java
      

private List<string> GetUserListAdGroupCriteria(
    GoogleAdsClient client, long customerId, long campaignId)
{
    // Get the GoogleAdsService client.
    GoogleAdsServiceClient googleAdsServiceClient =
        client.GetService(Services.V19.GoogleAdsService);

    List<string> userListCriteriaResourceNames = new List<string>();

    // Create a query that will retrieve all of the ad group criteria under a campaign.
    string query = $@"
        SELECT ad_group_criterion.criterion_id
        FROM ad_group_criterion
        WHERE
          campaign.id = {campaignId}
          AND ad_group_criterion.type = 'USER_LIST'";

    // Issue the search request.
    googleAdsServiceClient.SearchStream(customerId.ToString(), query,
        delegate (SearchGoogleAdsStreamResponse resp)
        {
            // Display the results and add the resource names to the list.
            foreach (GoogleAdsRow googleAdsRow in resp.Results)
            {
                string adGroupCriterionResourceName =
                    googleAdsRow.AdGroupCriterion.ResourceName;
                Console.WriteLine("Ad group criterion with resource name " +
                    $"{adGroupCriterionResourceName} was found.");
                userListCriteriaResourceNames.Add(adGroupCriterionResourceName);
            }
        });

    return userListCriteriaResourceNames;
}
SetUpRemarketing.cs
      

private static function getUserListAdGroupCriteria(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $campaignId
): array {
    // Creates a query that retrieves all of the ad group criteria under a campaign.
    $query = sprintf(
        "SELECT ad_group_criterion.criterion_id " .
        "FROM ad_group_criterion " .
        "WHERE campaign.id = %d " .
        "AND ad_group_criterion.type = 'USER_LIST'",
        $campaignId
    );

    // Creates the Google Ads service client.
    $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();

    // Issues the search request.
    $response =
        $googleAdsServiceClient->search(SearchGoogleAdsRequest::build($customerId, $query));

    $userListCriteria = [];
    // Iterates over all rows in all pages. Prints the user list criteria and adds the ad group
    // criteria resource names to the list.
    foreach ($response->iterateAllElements() as $googleAdsRow) {
        /** @var GoogleAdsRow $googleAdsRow */
        $adGroupCriterionResourceName = $googleAdsRow->getAdGroupCriterion()->getResourceName();

        printf(
            "Ad group criterion with resource name '%s' was found.%s",
            $adGroupCriterionResourceName,
            PHP_EOL
        );

        $userListCriteria[] = $adGroupCriterionResourceName;
    }

    return $userListCriteria;
}
SetUpRemarketing.php
      

def get_user_list_ad_group_criteria(client, customer_id, campaign_id):
    """Finds all of user list ad group criteria under a campaign.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID.
        campaign_id: a str campaign ID.

    Returns:
        a list of ad group criterion resource names.
    """
    # Creates a query that retrieves all of the ad group criteria under a
    # campaign.
    query = f"""
        SELECT
          ad_group_criterion.criterion_id
        FROM ad_group_criterion
        WHERE campaign.id = {campaign_id}
        AND ad_group_criterion.type = USER_LIST"""

    googleads_service = client.get_service("GoogleAdsService")
    search_request = client.get_type("SearchGoogleAdsRequest")
    search_request.customer_id = customer_id
    search_request.query = query
    response = googleads_service.search(request=search_request)

    # Iterates over all rows in all pages. Prints the user list criteria and
    # adds the ad group criteria resource names to the list.
    user_list_criteria = []
    for row in response:
        resource_name = row.ad_group_criterion.resource_name
        print(
            "Ad group criterion with resource name '{resource_name}' was "
            "found."
        )
        user_list_criteria.append(resource_name)

    return user_list_criteria
set_up_remarketing.py
      

def get_user_list_ad_group_criterion(
  client,
  customer_id,
  campaign_id
)
  user_list_criteria = []

  # Creates a query that will retrieve all of the ad group criteria 
  # under a campaign.
  query = <<~QUERY
    SELECT ad_group_criterion.criterion_id
    FROM ad_group_criterion
    WHERE campaign.id = #{campaign_id}
    AND ad_group_criterion.type = 'USER_LIST'
  QUERY

  # Issues the search request.
  response = client.service.google_ads.search(
    customer_id: customer_id,
    query: query,
  )

  # Iterates over all rows in all pages. Prints the results and adds the ad
  # group criteria resource names to the list.
  response.each do |row|
    ad_group_criterion_resource_name = row.ad_group_criterion.resource_name
    puts "Ad group criterion with resource name " \
      "'#{ad_group_criterion_resource_name}' was found"
    user_list_criteria << ad_group_criterion_resource_name
  end

  user_list_criteria
end
set_up_remarketing.rb
      

sub get_user_list_ad_group_criteria {
  my ($api_client, $customer_id, $campaign_id) = @_;

  my $user_list_criterion_resource_names = [];

  # Create a search stream request that will retrieve all of the user list ad
  # group criteria under a campaign.
  my $search_stream_request =
    Google::Ads::GoogleAds::V19::Services::GoogleAdsService::SearchGoogleAdsStreamRequest
    ->new({
      customerId => $customer_id,
      query      => sprintf(
        "SELECT ad_group_criterion.criterion_id " .
          "FROM ad_group_criterion " .
          "WHERE campaign.id = %d AND ad_group_criterion.type = 'USER_LIST'",
        $campaign_id
      )});

  my $search_stream_handler =
    Google::Ads::GoogleAds::Utils::SearchStreamHandler->new({
      service => $api_client->GoogleAdsService(),
      request => $search_stream_request
    });

  # Issue a search request and process the stream response.
  $search_stream_handler->process_contents(
    sub {
      # Display the results and add the resource names to the list.
      my $google_ads_row = shift;

      my $ad_group_criterion_resource_name =
        $google_ads_row->{adGroupCriterion}{resourceName};
      printf "Ad group criterion with resource name '%s' was found.\n",
        $ad_group_criterion_resource_name;
      push(@$user_list_criterion_resource_names,
        $ad_group_criterion_resource_name);
    });

  return $user_list_criterion_resource_names;
}
set_up_remarketing.pl
      

Następnie usuń wszystkie kryteria kierowania na grupę reklam, które zostały zwrócone.

JavaC#PHPPythonRubyPerl

private void removeExistingListCriteriaFromAdGroup(
    GoogleAdsClient googleAdsClient, long customerId, long campaignId) {
  // Retrieves all of the ad group criteria under a campaign.
  List<String> adGroupCriteria =
      getUserListAdGroupCriterion(googleAdsClient, customerId, campaignId);

  List<AdGroupCriterionOperation> operations = new ArrayList<>();

  // Creates a list of remove operations.
  for (String adGroupCriterion : adGroupCriteria) {
    operations.add(AdGroupCriterionOperation.newBuilder().setRemove(adGroupCriterion).build());
  }

  // Creates the ad group criterion service.
  try (AdGroupCriterionServiceClient adGroupCriterionServiceClient =
      googleAdsClient.getLatestVersion().createAdGroupCriterionServiceClient()) {
    // Removes the ad group criterion.
    MutateAdGroupCriteriaResponse response =
        adGroupCriterionServiceClient.mutateAdGroupCriteria(
            Long.toString(customerId), operations);
    // Gets and prints the results.
    System.out.printf("Removed %d ad group criteria.%n", response.getResultsCount());
    for (MutateAdGroupCriterionResult result : response.getResultsList()) {
      System.out.printf(
          "Successfully removed ad group criterion with resource name '%s'.%n",
          result.getResourceName());
    }
  }
}
SetUpRemarketing.java
      

private void RemoveExistingListCriteriaFromAdGroup(GoogleAdsClient client, long customerId,
    long campaignId)
{
    // Get the AdGroupCriterionService client.
    AdGroupCriterionServiceClient adGroupCriterionServiceClient =
        client.GetService(Services.V19.AdGroupCriterionService);

    // Retrieve all of the ad group criteria under a campaign.
    List<string> adGroupCriteria =
        GetUserListAdGroupCriteria(client, customerId, campaignId);

    // Create a list of remove operations.
    List<AdGroupCriterionOperation> operations = adGroupCriteria.Select(adGroupCriterion =>
        new AdGroupCriterionOperation { Remove = adGroupCriterion }).ToList();

    // Remove the ad group criteria and print the resource names of the removed criteria.
    MutateAdGroupCriteriaResponse mutateAdGroupCriteriaResponse =
        adGroupCriterionServiceClient.MutateAdGroupCriteria(customerId.ToString(),
            operations);

    Console.WriteLine($"Removed {mutateAdGroupCriteriaResponse.Results.Count} ad group " +
        "criteria.");
    foreach (MutateAdGroupCriterionResult result in mutateAdGroupCriteriaResponse.Results)
    {
        Console.WriteLine("Successfully removed ad group criterion with resource name " +
            $"'{result.ResourceName}'.");
    }
}
SetUpRemarketing.cs
      

private static function removeExistingListCriteriaFromAdGroup(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $campaignId
) {
    // Retrieves all of the ad group criteria under a campaign.
    $allAdGroupCriteria = self::getUserListAdGroupCriteria(
        $googleAdsClient,
        $customerId,
        $campaignId
    );

    $removeOperations = [];
    // Creates a list of remove operations.
    foreach ($allAdGroupCriteria as $adGroupCriterionResourceName) {
        $operation = new AdGroupCriterionOperation();
        $operation->setRemove($adGroupCriterionResourceName);
        $removeOperations[] = $operation;
    }

    // Issues a mutate request to remove the ad group criteria.
    $adGroupCriterionServiceClient = $googleAdsClient->getAdGroupCriterionServiceClient();
    /** @var MutateAdGroupCriteriaResponse $adGroupCriteriaResponse */
    $adGroupCriteriaResponse = $adGroupCriterionServiceClient->mutateAdGroupCriteria(
        MutateAdGroupCriteriaRequest::build($customerId, $removeOperations)
    );

    foreach ($adGroupCriteriaResponse->getResults() as $adGroupCriteriaResult) {
        printf(
            "Successfully removed ad group criterion with resource name '%s'.%s",
            $adGroupCriteriaResult->getResourceName(),
            PHP_EOL
        );
    }
}
SetUpRemarketing.php
      

def remove_existing_criteria_from_ad_group(client, customer_id, campaign_id):
    """Removes all ad group criteria targeting a user list under a campaign.

    This is a necessary step before targeting a user list at the campaign level.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID.
        campaign_id: a str ID for a campaign that will have all ad group
            criteria that targets user lists removed.
    """
    # Retrieves all of the ad group criteria under a campaign.
    all_ad_group_criteria = get_user_list_ad_group_criteria(
        client, customer_id, campaign_id
    )

    # Creates a list of remove operations.
    remove_operations = []
    for ad_group_criterion_resource_name in all_ad_group_criteria:
        remove_operation = client.get_type("AdGroupCriterionOperation")
        remove_operation.remove = ad_group_criterion_resource_name
        remove_operations.append(remove_operation)

    ad_group_criterion_service = client.get_service("AdGroupCriterionService")
    response = ad_group_criterion_service.mutate_ad_group_criteria(
        customer_id=customer_id, operations=remove_operations
    )
    print(
        "Successfully removed ad group criterion with resource name: "
        f"'{response.results[0].resource_name}'"
    )
set_up_remarketing.py
      

def remove_existing_list_criteria_from_ad_group(
  client,
  customer_id,
  campaign_id
)
  # Retrieves all of the ad group criteria under a campaign.
  ad_group_criteria = get_user_list_ad_group_criterion(
    client, customer_id, campaign_id)

  # Creates a list of remove operations.
  operations = []
  ad_group_criteria.each do |agc|
    operations << client.operation.remove_resource.ad_group_criterion(agc)
  end

  # Issues a mutate request to remove all ad group criteria.
  response = client.service.ad_group_criterion.mutate_ad_group_criteria(
    customer_id: customer_id,
    operations: operations,
  )
  puts "Removed #{response.results.size} ad group criteria."
  response.results.each do |result|
    puts "Successfully removed ad group criterion with resource name " \
      "'#{result.resource_name}'"
  end
end
set_up_remarketing.rb
      

sub remove_existing_list_criteria_from_ad_group {
  my ($api_client, $customer_id, $campaign_id) = @_;

  # Retrieve all of the ad group criteria under a campaign.
  my $ad_group_criteria =
    get_user_list_ad_group_criteria($api_client, $customer_id, $campaign_id);

  # Create a list of remove operations.
  my $operations = [];
  foreach my $ad_group_criterion (@$ad_group_criteria) {
    push(
      @$operations,
      Google::Ads::GoogleAds::V19::Services::AdGroupCriterionService::AdGroupCriterionOperation
        ->new({
          remove => $ad_group_criterion
        }));
  }

  # Remove the ad group criteria and print the resource names of the removed criteria.
  my $ad_group_criteria_response =
    $api_client->AdGroupCriterionService()->mutate({
      customerId => $customer_id,
      operations => $operations
    });

  printf "Removed %d ad group criteria.\n",
    scalar @{$ad_group_criteria_response->{results}};
  foreach my $result (@{$ad_group_criteria_response->{results}}) {
    printf "Successfully removed ad group criterion with resource name '%s'.\n",
      $result->{resourceName};
  }
}
set_up_remarketing.pl
      

Podczas przechodzenia na listy użytkowników na poziomie grupy reklam musisz też usunąć istniejące kryteria listy użytkowników na poziomie kampanii. Proces ten jest podobny do tego, który został opisany w poprzednim przykładzie.

kierować reklamy w kampanii na listę użytkowników za pomocą atrybutu CampaignCriterion,

JavaC#PHPPythonRubyPerl

private String targetAdsInCampaignToUserList(
    GoogleAdsClient googleAdsClient, long customerId, long campaignId, String userList) {
  // Creates the campaign criterion.
  CampaignCriterion campaignCriterion =
      CampaignCriterion.newBuilder()
          .setCampaign(ResourceNames.campaign(customerId, campaignId))
          .setUserList(UserListInfo.newBuilder().setUserList(userList).build())
          .build();

  // Creates the operation.
  CampaignCriterionOperation operation =
      CampaignCriterionOperation.newBuilder().setCreate(campaignCriterion).build();

  // Creates the campaign criterion service client.
  try (CampaignCriterionServiceClient campaignCriterionServiceClient =
      googleAdsClient.getLatestVersion().createCampaignCriterionServiceClient()) {
    // Adds the campaign criterion.
    MutateCampaignCriteriaResponse response =
        campaignCriterionServiceClient.mutateCampaignCriteria(
            Long.toString(customerId), ImmutableList.of(operation));
    // Gets and prints the campaign criterion resource name.
    String campaignCriterionResourceName = response.getResults(0).getResourceName();
    System.out.printf(
        "Successfully created campaign criterion with resource name '%s' "
            + "targeting user list with resource name '%s' with campaign with ID %d.%n",
        campaignCriterionResourceName, userList, campaignId);
    return campaignCriterionResourceName;
  }
}
SetUpRemarketing.java
      

private string TargetAdsInCampaignToUserList(
    GoogleAdsClient client, long customerId, long campaignId, string userListResourceName)
{
    // Get the CampaignCriterionService client.
    CampaignCriterionServiceClient campaignCriterionServiceClient =
        client.GetService(Services.V19.CampaignCriterionService);

    // Create the campaign criterion.
    CampaignCriterion campaignCriterion = new CampaignCriterion
    {
        Campaign = ResourceNames.Campaign(customerId, campaignId),
        UserList = new UserListInfo
        {
            UserList = userListResourceName
        }
    };

    // Create the operation.
    CampaignCriterionOperation campaignCriterionOperation = new CampaignCriterionOperation
    {
        Create = campaignCriterion
    };

    // Add the campaign criterion and print the resulting criterion's resource name.
    MutateCampaignCriteriaResponse mutateCampaignCriteriaResponse =
        campaignCriterionServiceClient.MutateCampaignCriteria(customerId.ToString(),
            new[] { campaignCriterionOperation });

    string campaignCriterionResourceName =
        mutateCampaignCriteriaResponse.Results.First().ResourceName;
    Console.WriteLine("Successfully created campaign criterion with resource name " +
        $"'{campaignCriterionResourceName}' targeting user list with resource name " +
        $"'{userListResourceName}' with campaign with ID {campaignId}.");

    return campaignCriterionResourceName;
}
SetUpRemarketing.cs
      

private static function targetAdsInCampaignToUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $campaignId,
    string $userListResourceName
): string {
    // Creates the campaign criterion.
    $campaignCriterion = new CampaignCriterion([
        'campaign' => ResourceNames::forCampaign($customerId, $campaignId),
        'user_list' => new UserListInfo(['user_list' => $userListResourceName])
    ]);

    // Creates the operation.
    $operation = new CampaignCriterionOperation();
    $operation->setCreate($campaignCriterion);

    // Issues a mutate request to create a campaign criterion.
    $campaignCriterionServiceClient = $googleAdsClient->getCampaignCriterionServiceClient();
    /** @var MutateCampaignCriteriaResponse $campaignCriteriaResponse */
    $campaignCriteriaResponse = $campaignCriterionServiceClient->mutateCampaignCriteria(
        MutateCampaignCriteriaRequest::build($customerId, [$operation])
    );

    $campaignCriterionResourceName =
        $campaignCriteriaResponse->getResults()[0]->getResourceName();
    printf(
        "Successfully created campaign criterion with resource name '%s' " .
        "targeting user list with resource name '%s' with campaign with ID %d.%s",
        $campaignCriterionResourceName,
        $userListResourceName,
        $campaignId,
        PHP_EOL
    );

    return $campaignCriterionResourceName;
}
SetUpRemarketing.php
      

def target_ads_in_campaign_to_user_list(
    client, customer_id, campaign_id, user_list_resource_name
):
    """Creates a campaign criterion that targets a user list with a campaign.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID used to create an campaign
            criterion.
        campaign_id: a str ID for a campaign used to create a campaign
            criterion that targets members of a user list.
        user_list_resource_name: a str resource name for a user list.

    Returns:
        a str resource name for a campaign criterion.
    """
    campaign_criterion_operation = client.get_type("CampaignCriterionOperation")
    campaign_criterion = campaign_criterion_operation.create
    campaign_criterion.campaign = client.get_service(
        "CampaignService"
    ).campaign_path(customer_id, campaign_id)
    campaign_criterion.user_list.user_list = user_list_resource_name

    campaign_criterion_service = client.get_service("CampaignCriterionService")
    response = campaign_criterion_service.mutate_campaign_criteria(
        customer_id=customer_id, operations=[campaign_criterion_operation]
    )
    resource_name = response.results[0].resource_name
    print(
        "Successfully created campaign criterion with resource name "
        f"'{resource_name}' targeting user list with resource name "
        f"'{user_list_resource_name}' with campaign with ID {campaign_id}"
    )
    return resource_name
set_up_remarketing.py
      

def target_ads_in_campaign_to_user_list(
  client,
  customer_id,
  campaign_id,
  user_list
)
  # Creates the campaign criterion targeting members of the user list.
  operation = client.operation.create_resource.campaign_criterion do |cc|
    cc.campaign = client.path.campaign(customer_id, campaign_id)
    cc.user_list = client.resource.user_list_info do |info|
      info.user_list = user_list
    end
  end

  # Issues a mutate request to create the campaign criterion.
  response = client.service.campaign_criterion.mutate_campaign_criteria(
    customer_id: customer_id,
    operations: [operation],
  )
  campaign_criterion_resource_name = response.results.first.resource_name
  puts "Successfully created campaign criterion with resource name " \
    "'#{campaign_criterion_resource_name}' targeting user list with resource name " \
    "'#{user_list}' with campaign with ID #{campaign_id}"

  campaign_criterion_resource_name
end
set_up_remarketing.rb
      

sub target_ads_in_campaign_to_user_list {
  my ($api_client, $customer_id, $campaign_id, $user_list_resource_name) = @_;

  # Create the campaign criterion.
  my $campaign_criterion =
    Google::Ads::GoogleAds::V19::Resources::CampaignCriterion->new({
      campaign => Google::Ads::GoogleAds::V19::Utils::ResourceNames::campaign(
        $customer_id, $campaign_id
      ),
      userList => Google::Ads::GoogleAds::V19::Common::UserListInfo->new({
          userList => $user_list_resource_name
        })});

  # Create the operation.
  my $campaign_criterion_operation =
    Google::Ads::GoogleAds::V19::Services::CampaignCriterionService::CampaignCriterionOperation
    ->new({
      create => $campaign_criterion
    });

  # Add the campaign criterion and print the resulting criterion's resource name.
  my $campaign_criteria_response =
    $api_client->CampaignCriterionService()->mutate({
      customerId => $customer_id,
      operations => [$campaign_criterion_operation]});

  my $campaign_criterion_resource_name =
    $campaign_criteria_response->{results}[0]{resourceName};
  printf "Successfully created campaign criterion with resource name '%s' " .
    "targeting user list with resource name '%s' with campaign with ID %d.\n",
    $campaign_criterion_resource_name, $user_list_resource_name, $campaign_id;

  return $campaign_criterion_resource_name;
}
set_up_remarketing.pl
      

Sprawdzanie skuteczności listy

Aby zbierać dane o skuteczności dotyczące segmentów odbiorców, wyślij zapytanie o wyszukiwanie do zasobu ad_group_audience_view lub campaign_audience_view. Możesz np. sprawdzić kolumnę conversions lub cost_per_conversion, aby ustalić, czy kierowanie na dany segment odbiorców rzeczywiście prowadzi do zwiększenia liczby konwersji, a potem odpowiednio dostosować modyfikatory stawek.

SELECT
  ad_group_criterion.criterion_id,
  metrics.conversions,
  metrics.cost_per_conversion
FROM ad_group_audience_view