리드 확보용 향상된 전환 구현하기

리드 확보를 위한 향상된 전환을 사용하면 해싱된 사용자 식별자와 Google Ads에서 리드를 유도한 광고에 전환을 연결하는 데 도움이 되는 일부 추가 세부정보(선택사항)가 포함된 클릭 전환을 업로드하여 오프라인 전환 측정의 정확성을 개선할 수 있습니다.

구현을 진행하기 전에 시작하기 가이드를 검토하고 리드 확보용 향상된 전환의 기본 요건을 구현하세요.

고객센터에 설명된 대로 Google Ads UI를 통해 리드용 향상된 전환을 업로드하거나 이 가이드에 설명된 대로 Google Ads API를 통해 업로드할 수 있습니다.

통합 설계

통합을 설계할 수 있습니다.

사용 흐름

다음은 Google Ads API에서 리드 확보용 향상된 전환을 업로드하는 전반적인 흐름입니다.

  1. 다음과 같은 기본 요건을 구현했는지 확인합니다.

    1. 전환 추적을 사용 설정합니다.

    2. 고객 데이터 약관에 동의합니다.

    3. 웹사이트 리드 양식에서 태그 지정을 구성합니다.

    자세한 안내는 기본 요건 구현을 참고하세요.

  2. 이메일 주소, 전화번호, 우편 주소와 같은 리드 데이터를 정규화하고 해싱합니다.

  3. 정규화되고 해싱된 리드 데이터를 ClickConversion 객체에 넣습니다. 각 ClickConversion에 대해 다음을 실행합니다.

    1. 정규화되고 해싱된 리드 데이터로 user_identifiers를 채웁니다. 사용 가능한 사용자 식별자가 여러 개인 경우 각 식별자에 대해 별도의 UserIdentifier를 만듭니다(최대 5개 식별자).

    2. (선택사항이지만 적극 권장됨) order_id를 채웁니다.

    3. (선택사항) 가장 정확한 측정을 위해 gclid를 채웁니다.

    4. ClickConversion 객체의 consent 필드를 채웁니다.

    5. conversion_action을 UPLOAD_CLICKS의 type가 있는 ConversionAction의 리소스 이름으로 설정합니다. 기본 요건을 구현할 때 만든 ConversionAction의 리소스 이름이어야 합니다.

  4. ClickConversion 생성 작업을 ConversionUploadService에 업로드하고 partial_failure를 true로 설정합니다.

  5. 업로드를 검토합니다.

권장사항

리드 확보를 위한 향상된 전환을 구현할 때는 다음 권장사항을 염두에 두세요.

고객 식별자 확인

전환을 업로드할 때 고객 ID는 전환 액션이 포함되어 있고 전환 추적을 실행하는 계정으로 설정해야 합니다. 이 설정을 확인하려면 게재 중인 Google Ads Customer 리소스에서 ConversionTrackingSetting를 쿼리합니다. GoogleAdsService.SearchStream를 사용하여 다음 쿼리를 실행하여 customer.conversion_tracking_setting.google_ads_conversion_customer의 값을 찾습니다.

식별자가 여러 개인 경우 모두 포함

전환에 order_id를 할당하는 경우 이를 포함하는 것이 좋습니다. 전환에 대한 gclid가 있는 경우 실적을 개선하기 위해 user_identifiers와 함께 전송하는 것이 좋습니다. 또한 전환에 UserIdentifier가 두 개 이상 있는 경우 여러 개를 포함하면 일치 가능성이 높아집니다. 동일한 ClickConversion에 모든 식별자를 포함합니다.

통합을 설정할 때 부분 실패 오류 검토

리드 통합을 위해 향상된 전환을 처음 설정할 때 응답의 partial_failure_error 필드에서 부분 오류가 있는지 검토하고 해결합니다. 설정에 문제가 있는 경우 이 입력란을 검사하여 문제를 조사하고 해결해야 합니다. 부분 실패 오류 처리에 관한 자세한 내용과 예시는 전용 부분 실패 가이드를 참고하세요.

부분 실패 오류를 검토할 때는 문제 해결 가이드의 일반적인 오류 표를 참고하세요. 부분 실패 오류로 표시된 문제를 해결하고 통합이 완료되면 오프라인 데이터 진단을 사용하여 전환 상태를 정기적으로 검토합니다.

단일 요청으로 여러 전환 일괄 처리

업로드할 전환이 여러 개인 경우 전환별로 업로드 요청을 전송하는 대신 작업을 하나의 UploadClickConversionsRequest로 일괄 처리합니다.

요청당 전환 수 한도는 할당량 가이드를 참고하세요.

오프라인 데이터 진단이 동일한 로직 작업 아래에 요청 집합을 그룹화하도록 하려면 모든 요청의 job_id를 동일한 값으로 설정합니다. 이는 여러 요청을 사용하여 대량의 전환을 업로드하는 단일 작업 또는 프로세스가 있는 경우에 유용할 수 있습니다. 각 요청에서 job_id를 동일한 값으로 설정하면 job_summaries에서 작업의 단일 항목을 검색할 수 있습니다. 대신 Google Ads API가 각 요청의 job_id에 시스템 생성 값을 할당하도록 허용하면 job_summaries에 각 요청에 대한 별도의 항목이 포함되므로 작업의 전반적인 상태를 분석하기가 더 어려워질 수 있습니다.

사용 가능한 모든 오프라인 전환 이벤트 업로드

완전하고 정확한 전환 보고를 하려면 Google Ads에서 발생하지 않았을 수도 있는 전환 이벤트를 포함하여 사용 가능한 모든 오프라인 전환 이벤트를 업로드하세요.

모든 전환 이벤트를 업로드하면 Google Ads에서 발생하지 않은 이벤트에 CLICK_NOT_FOUND 오류가 발생합니다. 모든 전환 이벤트를 업로드할 때 이러한 오류가 발생할 수 있으므로 UploadClickConversionsRequest에는 debug_enabled 필드가 있습니다.

  • debug_enabled가 false이거나 설정되지 않은 경우 Google Ads API는 기본 입력 유효성 검사만 실행하고 후속 업로드 검사를 건너뛰며 제공된 user_identifiers에 대한 클릭이 발견되지 않더라도 성공을 반환합니다.

    이는 기본값입니다.

  • debug_enabled가 true인 경우 Google Ads API는 모든 유효성 검사를 실행하고 제공된 user_identifiers에 대한 Google Ads 전환이 없는 모든 ClickConversion에 대해 CLICK_NOT_FOUND 오류를 반환합니다.

개발 및 테스트 중에 debug_enabled를 true로 설정하여 문제를 식별할 수 있습니다. 예를 들어 Google Ads 전환에서 발생한 것으로 알고 있는 전환 및 user_identifiers가 있는 경우 true 설정을 사용하여 이러한 업로드로 인해 CLICK_NOT_FOUND 오류가 발생하지 않는지 확인할 수 있습니다. 하지만 개발 및 테스트를 마친 후에는 과도한 오류를 방지하기 위해 debug_enabled를 false로 설정하는 것이 좋습니다.

외부 기여 분석 데이터를 사용하지 않음

ClickConversion에서 external_attribution_data를 설정하거나 외부 기여 분석 모델을 사용하는 conversion_action를 지정하지 마세요. Google Ads에서는 식별자를 사용하는 업로드에 대해 외부 기여 분석 전환을 지원하지 않습니다.

업로드할 데이터 준비

개인 정보 보호를 위해 다음 데이터는 업로드하기 전에 SHA-256을 사용하여 해싱해야 합니다.

  • 이메일 주소
  • 전화번호
  • 이름
  • 성
  • 상세 주소

다음 데이터는 해싱하지 마세요.

  • 국가
  • 주
  • 도시
  • 우편번호

해싱 결과를 표준화하려면 이러한 값을 해싱하기 전에 다음을 실행해야 합니다.

  • 선행 및 후행 공백을 삭제합니다.
  • 텍스트를 소문자로 변환합니다.
  • 전화번호는 E164 표준에 따른 형식으로 작성합니다.
  • gmail.com 및 googlemail.com 이메일 주소의 도메인 이름 앞에 있는 모든 마침표 (.)를 삭제합니다.

자바

private String normalizeAndHash(MessageDigest digest, String s)
    throws UnsupportedEncodingException {
  // Normalizes by first converting all characters to lowercase, then trimming spaces.
  String normalized = s.toLowerCase();
  // Removes leading, trailing, and intermediate spaces.
  normalized = normalized.replaceAll("\\s+", "");
  // Hashes the normalized string using the hashing algorithm.
  byte[] hash = digest.digest(normalized.getBytes("UTF-8"));
  StringBuilder result = new StringBuilder();
  for (byte b : hash) {
    result.append(String.format("%02x", b));
  }

  return result.toString();
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google Ads
 * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}.
 *
 * @param digest the digest to use to hash the normalized string.
 * @param emailAddress the email address to normalize and hash.
 */
private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress)
    throws UnsupportedEncodingException {
  String normalizedEmail = emailAddress.toLowerCase();
  String[] emailParts = normalizedEmail.split("@");
  if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) {
    // Removes any '.' characters from the portion of the email address before the domain if the
    // domain is gmail.com or googlemail.com.
    emailParts[0] = emailParts[0].replaceAll("\\.", "");
    normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]);
  }
  return normalizeAndHash(digest, normalizedEmail);
}
UploadEnhancedConversionsForLeads.java

C#

/// <summary>
/// Normalizes the email address and hashes it. For this use case, Google Ads requires
/// removal of any '.' characters preceding <code>gmail.com</code> or
/// <code>googlemail.com</code>.
/// </summary>
/// <param name="emailAddress">The email address.</param>
/// <returns>The hash code.</returns>
private string NormalizeAndHashEmailAddress(string emailAddress)
{
    string normalizedEmail = emailAddress.ToLower();
    string[] emailParts = normalizedEmail.Split('@');
    if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" ||
        emailParts[1] == "googlemail.com"))
    {
        // Removes any '.' characters from the portion of the email address before
        // the domain if the domain is gmail.com or googlemail.com.
        emailParts[0] = emailParts[0].Replace(".", "");
        normalizedEmail = $"{emailParts[0]}@{emailParts[1]}";
    }
    return NormalizeAndHash(normalizedEmail);
}

/// <summary>
/// Normalizes and hashes a string value.
/// </summary>
/// <param name="value">The value to normalize and hash.</param>
/// <returns>The normalized and hashed value.</returns>
private static string NormalizeAndHash(string value)
{
    return ToSha256String(digest, ToNormalizedValue(value));
}

/// <summary>
/// Hash a string value using SHA-256 hashing algorithm.
/// </summary>
/// <param name="digest">Provides the algorithm for SHA-256.</param>
/// <param name="value">The string value (e.g. an email address) to hash.</param>
/// <returns>The hashed value.</returns>
private static string ToSha256String(SHA256 digest, string value)
{
    byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value));
    // Convert the byte array into an unhyphenated hexadecimal string.
    return BitConverter.ToString(digestBytes).Replace("-", string.Empty);
}

/// <summary>
/// Removes leading and trailing whitespace and converts all characters to
/// lower case.
/// </summary>
/// <param name="value">The value to normalize.</param>
/// <returns>The normalized value.</returns>
private static string ToNormalizedValue(string value)
{
    return value.Trim().ToLower();
}
UploadEnhancedConversionsForLeads.cs

PHP

private static function normalizeAndHash(string $hashAlgorithm, string $value): string
{
    // Normalizes by first converting all characters to lowercase, then trimming spaces.
    $normalized = strtolower($value);
    // Removes leading, trailing, and intermediate spaces.
    $normalized = str_replace(' ', '', $normalized);
    return hash($hashAlgorithm, strtolower(trim($normalized)));
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google
 * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com".
 *
 * @param string $hashAlgorithm the hash algorithm to use
 * @param string $emailAddress the email address to normalize and hash
 * @return string the normalized and hashed email address
 */
private static function normalizeAndHashEmailAddress(
    string $hashAlgorithm,
    string $emailAddress
): string {
    $normalizedEmail = strtolower($emailAddress);
    $emailParts = explode("@", $normalizedEmail);
    if (
        count($emailParts) > 1
        && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1])
    ) {
        // Removes any '.' characters from the portion of the email address before the domain
        // if the domain is gmail.com or googlemail.com.
        $emailParts[0] = str_replace(".", "", $emailParts[0]);
        $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]);
    }
    return self::normalizeAndHash($hashAlgorithm, $normalizedEmail);
}
UploadEnhancedConversionsForLeads.php

Python

def normalize_and_hash_email_address(email_address):
    """Returns the result of normalizing and hashing an email address.

    For this use case, Google Ads requires removal of any '.' characters
    preceding "gmail.com" or "googlemail.com"

    Args:
        email_address: An email address to normalize.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-265 hashed string.
    """
    normalized_email = email_address.lower()
    email_parts = normalized_email.split("@")
    # Checks whether the domain of the email address is either "gmail.com"
    # or "googlemail.com". If this regex does not match then this statement
    # will evaluate to None.
    is_gmail = re.match(r"^(gmail|googlemail)\.com$", email_parts[1])

    # Check that there are at least two segments and the second segment
    # matches the above regex expression validating the email domain name.
    if len(email_parts) > 1 and is_gmail:
        # Removes any '.' characters from the portion of the email address
        # before the domain if the domain is gmail.com or googlemail.com.
        email_parts[0] = email_parts[0].replace(".", "")
        normalized_email = "@".join(email_parts)

    return normalize_and_hash(normalized_email)


def normalize_and_hash(s):
    """Normalizes and hashes a string with SHA-256.

    Private customer data must be hashed during upload, as described at:
    https://support.google.com/google-ads/answer/7474263

    Args:
        s: The string to perform this operation on.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-256 hashed string.
    """
    return hashlib.sha256(s.strip().lower().encode()).hexdigest()
upload_enhanced_conversions_for_leads.py

Ruby

# Returns the result of normalizing and then hashing the string using the
# provided digest.  Private customer data must be hashed during upload, as
# described at https://support.google.com/google-ads/answer/7474263.
def normalize_and_hash(str)
  # Remove leading and trailing whitespace and ensure all letters are lowercase
  # before hasing.
  Digest::SHA256.hexdigest(str.strip.downcase)
end

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
def normalize_and_hash_email(email)
  email_parts = email.downcase.split("@")
  # Removes any '.' characters from the portion of the email address before the
  # domain if the domain is gmail.com or googlemail.com.
  if email_parts.last =~ /^(gmail|googlemail)\.com\s*/
    email_parts[0] = email_parts[0].gsub('.', '')
  end
  normalize_and_hash(email_parts.join('@'))
end
upload_enhanced_conversions_for_leads.rb

Perl

sub normalize_and_hash {
  my $value = shift;

  # Removes leading, trailing, and intermediate spaces.
  $value =~ s/\s+//g;
  return sha256_hex(lc $value);
}

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
sub normalize_and_hash_email_address {
  my $email_address = shift;

  my $normalized_email = lc $email_address;
  my @email_parts      = split('@', $normalized_email);
  if (scalar @email_parts > 1
    && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/)
  {
    # Remove any '.' characters from the portion of the email address before the
    # domain if the domain is 'gmail.com' or 'googlemail.com'.
    $email_parts[0] =~ s/\.//g;
    $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1];
  }
  return normalize_and_hash($normalized_email);
}
upload_enhanced_conversions_for_leads.pl

향상된 전환 업로드

다음 스니펫은 필요에 따라 표준화 및 해싱이 적용된 이메일 주소 및 전화번호 식별자가 포함된 전환 업로드를 구성하는 방법을 보여줍니다. 가능한 경우 전환에 gclid 및 order_id를 포함하는 것이 좋습니다.

ClickConversion에 사용자 식별자 추가

자바

// Creates an empty builder for constructing the click conversion.
ClickConversion.Builder clickConversionBuilder = ClickConversion.newBuilder();

// Extracts user email and phone from the raw data, normalizes and hashes it, then wraps it in
// UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but
// in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
// hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
// than one of these attributes on the same UserIdentifier will clear all the other members
// of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// UserIdentifier incorrectlyPopulatedUserIdentifier =
//     UserIdentifier.newBuilder()
//         .setHashedEmail("...")
//         .setHashedPhoneNumber("...")
//         .build();

ImmutableMap.Builder<String, String> rawRecordBuilder =
    ImmutableMap.<String, String>builder()
        .put("email", "alex.2@example.com")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        // This example lets you put conversion details as arguments, but in reality you might
        // store this data alongside other user data, so we include it in this sample user
        // record.
        .put("conversionActionId", Long.toString(conversionActionId))
        .put("conversionDateTime", conversionDateTime)
        .put("conversionValue", Double.toString(conversionValue))
        .put("currencyCode", "USD");

// Adds entries for the optional fields.
if (orderId != null) {
  rawRecordBuilder.put("orderId", orderId);
}
if (gclid != null) {
  rawRecordBuilder.put("gclid", gclid);
}
if (adUserDataConsent != null) {
  rawRecordBuilder.put("adUserDataConsent", adUserDataConsent.name());
}

// Builds the map representing the record.
Map<String, String> rawRecord = rawRecordBuilder.build();

// Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256");

// Creates a list for the user identifiers.
List<UserIdentifier> userIdentifiers = new ArrayList<>();

// Creates a user identifier using the hashed email address, using the normalize and hash method
// specifically for email addresses.
UserIdentifier emailIdentifier =
    UserIdentifier.newBuilder()
        // Optional: specify the user identifier source.
        .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY)
        // Uses the normalize and hash method specifically for email addresses.
        .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email")))
        .build();
userIdentifiers.add(emailIdentifier);

// Creates a user identifier using normalized and hashed phone info.
UserIdentifier hashedPhoneNumberIdentifier =
    UserIdentifier.newBuilder()
        .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone")))
        .build();
// Adds the hashed phone number identifier to the UserData object's list.
userIdentifiers.add(hashedPhoneNumberIdentifier);

// Adds the user identifiers to the conversion.
clickConversionBuilder.addAllUserIdentifiers(userIdentifiers);
UploadEnhancedConversionsForLeads.java

C#

// Adds a user identifier using the hashed email address, using the normalize
// and hash method specifically for email addresses.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedEmail = NormalizeAndHashEmailAddress("alex.2@example.com"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier using normalized and hashed phone info.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedPhoneNumber = NormalizeAndHash("+1 800 5550102"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier with all the required mailing address elements.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    AddressInfo = new OfflineUserAddressInfo()
    {
        // FirstName and LastName must be normalized and hashed.
        HashedFirstName = NormalizeAndHash("Alex"),
        HashedLastName = NormalizeAndHash("Quinn"),
        // CountryCode and PostalCode are sent in plain text.
        CountryCode = "US",
        PostalCode = "94045"
    }
});
UploadEnhancedConversionsForLeads.cs

PHP

// Creates a click conversion with the specified attributes.
$clickConversion = new ClickConversion();

// Extract user email and phone from the raw data, normalize and hash it, then wrap it in
// UserIdentifier objects. Creates a separate UserIdentifier object for each.
// The data in this example is hardcoded, but in your application you might read the raw
// data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE
// of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting
// more than one of these attributes on the same UserIdentifier will clear all the other
// members of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// $incorrectlyPopulatedUserIdentifier = new UserIdentifier([
//    'hashed_email' => '...',
//    'hashed_phone_number' => '...'
// ]);

$rawRecord = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
    // This example lets you input conversion details as arguments, but in reality you might
    // store this data alongside other user data, so we include it in this sample user
    // record.
    'orderId' => $orderId,
    'gclid' => $gclid,
    'conversionActionId' => $conversionActionId,
    'conversionDateTime' => $conversionDateTime,
    'conversionValue' => $conversionValue,
    'currencyCode' => 'USD',
    'adUserDataConsent' => $adUserDataConsent
];

// Creates a list for the user identifiers.
$userIdentifiers = [];

// Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
$hashAlgorithm = "sha256";

// Creates a user identifier using the hashed email address, using the normalize and hash
// method specifically for email addresses.
$emailIdentifier = new UserIdentifier([
    // Uses the normalize and hash method specifically for email addresses.
    'hashed_email' => self::normalizeAndHashEmailAddress(
        $hashAlgorithm,
        $rawRecord['email']
    ),
    // Optional: Specifies the user identifier source.
    'user_identifier_source' => UserIdentifierSource::FIRST_PARTY
]);
$userIdentifiers[] = $emailIdentifier;

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (array_key_exists('phone', $rawRecord)) {
    $hashedPhoneNumberIdentifier = new UserIdentifier([
        'hashed_phone_number' => self::normalizeAndHash(
            $hashAlgorithm,
            $rawRecord['phone'],
            true
        )
    ]);
    // Adds the hashed email identifier to the user identifiers list.
    $userIdentifiers[] = $hashedPhoneNumberIdentifier;
}

// Adds the user identifiers to the conversion.
$clickConversion->setUserIdentifiers($userIdentifiers);
UploadEnhancedConversionsForLeads.php

Python

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier = client.get_type("UserIdentifier")
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email": "alex.2@example.com",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone": "+1 800 5550102",
    # This example lets you input conversion details as arguments,
    # but in reality you might store this data alongside other user data,
    # so we include it in this sample user record.
    "order_id": order_id,
    "gclid": gclid,
    "conversion_action_id": conversion_action_id,
    "conversion_date_time": conversion_date_time,
    "conversion_value": conversion_value,
    "currency_code": "USD",
    "ad_user_data_consent": ad_user_data_consent,
}

# Constructs the click conversion.
click_conversion = client.get_type("ClickConversion")
# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
email_identifier = client.get_type("UserIdentifier")
# Optional: Specifies the user identifier source.
email_identifier.user_identifier_source = (
    client.enums.UserIdentifierSourceEnum.FIRST_PARTY
)
# Uses the normalize and hash method specifically for email addresses.
email_identifier.hashed_phone_number = normalize_and_hash_email_address(
    raw_record["email"]
)
# Adds the user identifier to the conversion.
click_conversion.user_identifiers.append(email_identifier)

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
if raw_record.get("phone") is not None:
    phone_identifier = client.get_type("UserIdentifier")
    phone_identifier.hashed_phone_number = normalize_and_hash(
        raw_record["phone"]
    )
    # Adds the phone identifier to the conversion adjustment.
    click_conversion.user_identifiers.append(phone_identifier)
upload_enhanced_conversions_for_leads.py

Ruby

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  "email" => "alex.2@example.com",
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  "phone" => "+1 800 5550102",
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  "order_id" => order_id,
  "gclid" => gclid,
  "conversion_action_id" => conversion_action_id,
  "conversion_date_time" => conversion_date_time,
  "conversion_value" => conversion_value,
  "currency_code" => "USD",
  "ad_user_data_consent" => ad_user_data_consent,
}

click_conversion = client.resource.click_conversion do |cc|
  cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
  cc.conversion_date_time = conversion_date_time
  cc.conversion_value = conversion_value.to_f
  cc.currency_code = 'USD'

  unless order_id.nil?
    cc.order_id = order_id
  end

  unless raw_record["gclid"].nil?
    cc.gclid = gclid
  end

  # Specifies whether user consent was obtained for the data you are
  # uploading. For more details, see:
  # https://www.google.com/about/company/user-consent-policy
  unless raw_record["ad_user_data_consent"].nil?
    cc.consent = client.resource.consent do |c|
      c.ad_user_data = ad_user_data_consent
    end
  end

  # Creates a user identifier using the hashed email address, using the
  # normalize and hash method specifically for email addresses.
  # If using a phone number, use the normalize_and_hash method instead.
  cc.user_identifiers << client.resource.user_identifier do |ui|
    ui.hashed_phone_number = normalize_and_hash_email(raw_record["email"])
    # Optional: Specifies the user identifier source.
    ui.user_identifier_source = :FIRST_PARTY
  end

  # Checks if the record has a phone number, and if so, adds a UserIdentifier
  # for it.
  unless raw_record["phone"].nil?
    cc.user_identifiers << client.resource.user_identifier do |ui|
      ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
    end
  end
end
upload_enhanced_conversions_for_leads.rb

Perl

# Create an empty click conversion.
my $click_conversion =
  Google::Ads::GoogleAds::V18::Services::ConversionUploadService::ClickConversion
  ->new({});

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each.
# The data in this example is hardcoded, but in your application
# you might read the raw data from an input file.
#
# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
# only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
# or address-info. Setting more than one of these attributes on the same UserIdentifier
# will clear all the other members of the oneof. For example, the following code is
# INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
#
# my $incorrect_user_identifier = Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
#   hashedEmail => '...',
#   hashedPhoneNumber => '...',
# });
my $raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  email => 'alex.2@example.com',
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  phone => '+1 800 5550102',
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  orderId            => $order_id,
  gclid              => $gclid,
  conversionActionId => $conversion_action_id,
  conversionDateTime => $conversion_date_time,
  conversionValue    => $conversion_value,
  currencyCode       => "USD",
  adUserDataConsent  => $ad_user_data_consent
};
my $user_identifiers = [];

# Create a user identifier using the hashed email address, using the normalize
# and hash method specifically for email addresses.
my $hashed_email = normalize_and_hash_email_address($raw_record->{email});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
      hashedEmail => $hashed_email,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Create a user identifier using normalized and hashed phone info.
my $hashed_phone = normalize_and_hash($raw_record->{phone});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
      hashedPhone => $hashed_phone,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Add the user identifiers to the conversion.
$click_conversion->{userIdentifiers} = $user_identifiers;
upload_enhanced_conversions_for_leads.pl

ClickConversion에 전환 세부정보 추가

자바

// Adds details of the conversion.
clickConversionBuilder.setConversionAction(
    ResourceNames.conversionAction(
        customerId, Long.parseLong(rawRecord.get("conversionActionId"))));
clickConversionBuilder.setConversionDateTime(rawRecord.get("conversionDateTime"));
clickConversionBuilder.setConversionValue(Double.parseDouble(rawRecord.get("conversionValue")));
clickConversionBuilder.setCurrencyCode(rawRecord.get("currencyCode"));

// Sets the order ID if provided.
if (rawRecord.containsKey("orderId")) {
  clickConversionBuilder.setOrderId(rawRecord.get("orderId"));
}

// Sets the Google click ID (gclid) if provided.
if (rawRecord.containsKey("gclid")) {
  clickConversionBuilder.setGclid(rawRecord.get("gclid"));
}

// Sets the consent information, if provided.
if (rawRecord.containsKey("adUserDataConsent")) {
  // Specifies whether user consent was obtained for the data you are uploading. See
  // https://www.google.com/about/company/user-consent-policy for details.
  clickConversionBuilder.setConsent(
      Consent.newBuilder()
          .setAdUserData(ConsentStatus.valueOf(rawRecord.get("adUserDataConsent"))));
}

// Calls build to build the conversion.
ClickConversion clickConversion = clickConversionBuilder.build();
UploadEnhancedConversionsForLeads.java

C#

// Adds details of the conversion.
clickConversion.ConversionAction =
    ResourceNames.ConversionAction(customerId, conversionActionId);
clickConversion.ConversionDateTime = conversionDateTime;
clickConversion.ConversionValue = conversionValue;
clickConversion.CurrencyCode = "USD";

// Sets the order ID if provided.
if (!string.IsNullOrEmpty(orderId))
{
    clickConversion.OrderId = orderId;
}

// Sets the Google click ID (gclid) if provided.
if (!string.IsNullOrEmpty(gclid))
{
    clickConversion.Gclid = gclid;
}

UploadEnhancedConversionsForLeads.cs

PHP

// Adds details of the conversion.
$clickConversion->setConversionAction(
    ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId'])
);
$clickConversion->setConversionDateTime($rawRecord['conversionDateTime']);
$clickConversion->setConversionValue($rawRecord['conversionValue']);
$clickConversion->setCurrencyCode($rawRecord['currencyCode']);

// Sets the order ID if provided.
if (!empty($rawRecord['orderId'])) {
    $clickConversion->setOrderId($rawRecord['orderId']);
}

// Sets the Google click ID (gclid) if provided.
if (!empty($rawRecord['gclid'])) {
    $clickConversion->setGclid($rawRecord['gclid']);
}

// Sets the ad user data consent if provided.
if (!empty($rawRecord['adUserDataConsent'])) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    $clickConversion->setConsent(
        new Consent(['ad_user_data' => $rawRecord['adUserDataConsent']])
    );
}
UploadEnhancedConversionsForLeads.php

Python

# Add details of the conversion.
# Gets the conversion action resource name.
conversion_action_service = client.get_service("ConversionActionService")
click_conversion.conversion_action = (
    conversion_action_service.conversion_action_path(
        customer_id, raw_record["conversion_action_id"]
    )
)
click_conversion.conversion_date_time = raw_record["conversion_date_time"]
click_conversion.conversion_value = raw_record["conversion_value"]
click_conversion.currency_code = raw_record["currency_code"]

# Sets the order ID if provided.
if raw_record.get("order_id"):
    click_conversion.order_id = raw_record["order_id"]

# Sets the gclid if provided.
if raw_record.get("gclid"):
    click_conversion.gclid = raw_record["gclid"]

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
if raw_record["ad_user_data_consent"]:
    click_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
        raw_record["ad_user_data_consent"]
    ]
upload_enhanced_conversions_for_leads.py

Ruby

cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
cc.conversion_date_time = conversion_date_time
cc.conversion_value = conversion_value.to_f
cc.currency_code = 'USD'

unless order_id.nil?
  cc.order_id = order_id
end

unless raw_record["gclid"].nil?
  cc.gclid = gclid
end

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
unless raw_record["ad_user_data_consent"].nil?
  cc.consent = client.resource.consent do |c|
    c.ad_user_data = ad_user_data_consent
  end
end
upload_enhanced_conversions_for_leads.rb

Perl

# Add details of the conversion.
$click_conversion->{conversionAction} =
  Google::Ads::GoogleAds::V18::Utils::ResourceNames::conversion_action(
  $customer_id, $raw_record->{conversionActionId});
$click_conversion->{conversionDateTime} = $raw_record->{conversionDateTime};
$click_conversion->{conversionValue}    = $raw_record->{conversionValue};
$click_conversion->{currencyCode}       = $raw_record->{currencyCode};

# Set the order ID if provided.
if (defined $raw_record->{orderId}) {
  $click_conversion->{orderId} = $raw_record->{orderId};
}

# Set the Google click ID (gclid) if provided.
if (defined $raw_record->{gclid}) {
  $click_conversion->{gclid} = $raw_record->{gclid};
}

# Set the consent information, if provided.
if (defined $raw_record->{adUserDataConsent}) {
  $click_conversion->{consent} =
    Google::Ads::GoogleAds::V18::Common::Consent->new({
      adUserData => $raw_record->{adUserDataConsent}});
}
upload_enhanced_conversions_for_leads.pl

ClickConversion 업로드

자바

// Creates the conversion upload service client.
try (ConversionUploadServiceClient conversionUploadServiceClient =
    googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
  // Uploads the click conversion. Partial failure should always be set to true.

  // NOTE: This request contains a single conversion as a demonstration.  However, if you have
  // multiple conversions to upload, it's best to upload multiple conversions per request
  // instead of sending a separate request per conversion. See the following for per-request
  // limits:
  // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  UploadClickConversionsResponse response =
      conversionUploadServiceClient.uploadClickConversions(
          UploadClickConversionsRequest.newBuilder()
              .setCustomerId(Long.toString(customerId))
              .addConversions(clickConversion)
              // Enables partial failure (must be true).
              .setPartialFailure(true)
              .build());
UploadEnhancedConversionsForLeads.java

C#

// Uploads the click conversion. Partial failure should always be set to true.
// NOTE: This request contains a single conversion as a demonstration.
// However, if you have multiple conversions to upload, it's best to upload multiple
// conversions per request instead of sending a separate request per conversion.
// See the following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload
UploadClickConversionsResponse response =
    conversionUploadService.UploadClickConversions(
        new UploadClickConversionsRequest()
        {
            CustomerId = customerId.ToString(),
            Conversions = { clickConversion },
            // Enables partial failure (must be true).
            PartialFailure = true
        });

UploadEnhancedConversionsForLeads.cs

PHP

// Issues a request to upload the click conversion.
$conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
// NOTE: This request contains a single conversion as a demonstration.  However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
$response = $conversionUploadServiceClient->uploadClickConversions(
    // Enables partial failure (must be true).
    UploadClickConversionsRequest::build($customerId, [$clickConversion], true)
);
UploadEnhancedConversionsForLeads.php

Python

# Creates the conversion upload service client.
conversion_upload_service = client.get_service("ConversionUploadService")
# Uploads the click conversion. Partial failure should always be set to
# True.
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
response = conversion_upload_service.upload_click_conversions(
    customer_id=customer_id,
    conversions=[click_conversion],
    # Enables partial failure (must be true).
    partial_failure=True,
)
upload_enhanced_conversions_for_leads.py

Ruby

response = client.service.conversion_upload.upload_click_conversions(
  customer_id: customer_id,
  conversions: [click_conversion],
  # Partial failure must be true.
  partial_failure: true,
)

if response.partial_failure_error
  puts "Partial failure encountered: #{response.partial_failure_error.message}"
else
  result = response.results.first
  puts "Uploaded click conversion that happened at #{result.conversion_date_time} " \
    "to #{result.conversion_action}."
end
upload_enhanced_conversions_for_leads.rb

Perl

# Upload the click conversion. Partial failure should always be set to true.
#
# NOTE: This request contains a single conversion as a demonstration.
# However, if you have multiple conversions to upload, it's best to
# upload multiple conversions per request instead of sending a separate
# request per conversion. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
my $response =
  $api_client->ConversionUploadService()->upload_click_conversions({
    customerId  => $customer_id,
    conversions => [$click_conversion],
    # Enable partial failure (must be true).
    partialFailure => "true"
  });
upload_enhanced_conversions_for_leads.pl

업로드 검토

오프라인 데이터 진단을 사용하여 최근 업로드의 전반적인 상태를 검토합니다. 업로드에 성공했다고 해서 업로드에 일치 항목이 있는 것은 아닙니다.

캠페인의 전환 측정항목을 보고할 때는 사용자 인터페이스 측정항목 매핑을 참고하여 Google Ads UI 측정항목을 Google Ads API 보고 필드와 연결하세요. conversion_action 리소스를 쿼리하여 특정 전환 액션의 총 전환수 및 총 전환 가치를 확인할 수도 있습니다.

다음 단계

전환을 조정해야 하는 경우 전환 조정 업로드 가이드를 참고하세요.

리드 확보용 향상된 전환 통합 문제 해결에 관한 안내는 문제 해결 가이드를 참고하세요.

이전
설정
다음
문제 해결