ee.Filter.equals

یک فیلتر یونری یا باینری ایجاد می کند که در صورت مساوی بودن دو عملوند عبور می کند.

استفاده	برمی گرداند
ee.Filter.equals( leftField , rightValue , rightField , leftValue )	فیلتر کنید

استدلال	تایپ کنید	جزئیات
leftField	رشته، پیش فرض: null	یک انتخابگر برای عملوند سمت چپ. اگر leftValue مشخص شده باشد، نباید مشخص شود.
rightValue	Object، پیش فرض: null	مقدار عملوند مناسب اگر rightField مشخص شده باشد، نباید مشخص شود.
rightField	رشته، پیش فرض: null	انتخابگر برای عملوند مناسب. اگر rightValue مشخص شده باشد، نباید مشخص شود.
leftValue	Object، پیش فرض: null	مقدار عملوند سمت چپ اگر leftField مشخص شده باشد، نباید مشخص شود.

نمونه ها

ویرایشگر کد (جاوا اسکریپت)

// Field site vegetation characteristics from projects in western USA.
var fc = ee.FeatureCollection('BLM/AIM/v1/TerrADat/TerrestrialAIM')
  .filter('ProjectName == "Colorado NWDO Kremmling FO 2016"');

// Display field plots on the map.
Map.setCenter(-107.792, 39.871, 7);
Map.addLayer(fc);

// Compare the per-feature values of two properties and filter the collection
// based on the results of various relational expressions. The two properties
// to compare are invasive and non-invasive annual forb cover at each plot.
var leftProperty = 'InvAnnForbCover_AH';
var rightProperty = 'NonInvAnnForbCover_AH';

print('Plots where invasive forb cover is…');

print('…EQUAL to non-invasive cover',
      fc.filter(ee.Filter.equals(
        {leftField: leftProperty, rightField: rightProperty})));

print('…NOT EQUAL to non-invasive cover',
      fc.filter(ee.Filter.notEquals(
        {leftField: leftProperty, rightField: rightProperty})));

print('…LESS THAN non-invasive cover',
      fc.filter(ee.Filter.lessThan(
        {leftField: leftProperty, rightField: rightProperty})));

print('…LESS THAN OR EQUAL to non-invasive cover',
      fc.filter(ee.Filter.lessThanOrEquals(
        {leftField: leftProperty, rightField: rightProperty})));

print('…GREATER THAN non-invasive cover',
      fc.filter(ee.Filter.greaterThan(
        {leftField: leftProperty, rightField: rightProperty})));

print('…GREATER THAN OR EQUAL to non-invasive cover',
      fc.filter(ee.Filter.greaterThanOrEquals(
        {leftField: leftProperty, rightField: rightProperty})));

print('…is not greater than 10 percent different than non-invasive cover',
      fc.filter(ee.Filter.maxDifference(
        {difference: 10, leftField: leftProperty, rightField: rightProperty})));

// Instead of comparing values of two feature properties using the leftField
// and rightField parameters, you can compare a property value (leftProperty)
// against a constant value (rightValue).
print('Plots where invasive forb cover is greater than 20%',
      fc.filter(ee.Filter.greaterThan(
        {leftField: leftProperty, rightValue: 20})));

// You can also swap the operands to assign the constant to the left side of
// the relational expression (leftValue) and the feature property on the right
// (rightField). Here, we get the complement of the previous example.
print('Plots where 20% is greater than invasive forb cover.',
      fc.filter(ee.Filter.greaterThan(
        {leftValue: 20, rightField: leftProperty})));

// Binary filters are useful in joins. For example, group all same-site plots
// together using a saveAll join.
var groupingProp = 'SiteID';
var sitesFc = fc.distinct(groupingProp);

var joinFilter = ee.Filter.equals(
  {leftField: groupingProp, rightField: groupingProp});

var groupedPlots = ee.Join.saveAll('site_plots').apply(sitesFc, fc, joinFilter);
print('List of plots in first site', groupedPlots.first().get('site_plots'));

راه اندازی پایتون

برای اطلاعات در مورد API پایتون و استفاده از geemap برای توسعه تعاملی به صفحه محیط پایتون مراجعه کنید.

import ee
import geemap.core as geemap

کولب (پایتون)

# Field site vegetation characteristics from projects in western USA.
fc = ee.FeatureCollection('BLM/AIM/v1/TerrADat/TerrestrialAIM').filter(
    'ProjectName == "Colorado NWDO Kremmling FO 2016"'
)

# Display field plots on the map.
m = geemap.Map()
m.set_center(-107.792, 39.871, 7)
m.add_layer(fc)
m

# Compare the per-feature values of two properties and filter the collection
# based on the results of various relational expressions. The two properties
# to compare are invasive and non-invasive annual forb cover at each plot.
left_property = 'InvAnnForbCover_AH'
right_property = 'NonInvAnnForbCover_AH'

display('Plots where invasive forb cover is…')

display(
    '…EQUAL to non-invasive cover',
    fc.filter(
        ee.Filter.equals(leftField=left_property, rightField=right_property)
    ),
)

display(
    '…NOT EQUAL to non-invasive cover',
    fc.filter(
        ee.Filter.notEquals(leftField=left_property, rightField=right_property)
    ),
)

display(
    '…LESS THAN non-invasive cover',
    fc.filter(
        ee.Filter.lessThan(leftField=left_property, rightField=right_property)
    ),
)

display(
    '…LESS THAN OR EQUAL to non-invasive cover',
    fc.filter(
        ee.Filter.lessThanOrEquals(
            leftField=left_property, rightField=right_property
        )
    ),
)

display(
    '…GREATER THAN non-invasive cover',
    fc.filter(
        ee.Filter.greaterThan(
            leftField=left_property, rightField=right_property
        )
    ),
)

display(
    '…GREATER THAN OR EQUAL to non-invasive cover',
    fc.filter(
        ee.Filter.greaterThanOrEquals(
            leftField=left_property, rightField=right_property
        )
    ),
)

display(
    '…is not greater than 10 percent different than non-invasive cover',
    fc.filter(
        ee.Filter.maxDifference(
            difference=10, leftField=left_property, rightField=right_property
        )
    ),
)

# Instead of comparing values of two feature properties using the leftField
# and rightField parameters, you can compare a property value (left_property)
# against a constant value (rightValue).
display(
    'Plots where invasive forb cover is greater than 20%',
    fc.filter(ee.Filter.greaterThan(leftField=left_property, rightValue=20)),
)

# You can also swap the operands to assign the constant to the left side of
# the relational expression (leftValue) and the feature property on the right
# (rightField). Here, we get the complement of the previous example.
display(
    'Plots where 20% is greater than invasive forb cover.',
    fc.filter(ee.Filter.greaterThan(leftValue=20, rightField=left_property)),
)

# Binary filters are useful in joins. For example, group all same-site plots
# together using a saveAll join.
grouping_prop = 'SiteID'
sites_fc = fc.distinct(grouping_prop)

join_filter = ee.Filter.equals(
    leftField=grouping_prop, rightField=grouping_prop
)

grouped_plots = ee.Join.saveAll('site_plots').apply(sites_fc, fc, join_filter)
display('List of plots in first site', grouped_plots.first().get('site_plots'))